summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-05drm/scheduler: provide scheduler score externallyChristian König
Allow multiple schedulers to share the load balancing score. This is useful when one engine has different hw rings. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204144405.2737-1-christian.koenig@amd.com
2021-02-05drm/qxl: allocate dumb buffers in ramGerd Hoffmann
dumb buffers are shadowed anyway, so there is no need to store them in device memory. Use QXL_GEM_DOMAIN_CPU (TTM_PL_SYSTEM) instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-11-kraxel@redhat.com
2021-02-05drm/qxl: simplify qxl_fence_waitGerd Hoffmann
Now that we have the new release_event wait queue we can just use that in qxl_fence_wait() and simplify the code a lot. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-10-kraxel@redhat.com
2021-02-05drm/qxl: properly free qxl releasesGerd Hoffmann
Reorganize qxl_device_fini() a bit. Add missing unpin() calls. Count releases. Add wait queue for releases. That way qxl_device_fini() can easily wait until everything is ready for proper shutdown. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-9-kraxel@redhat.com
2021-02-05drm/qxl: handle shadow in primary destroyGerd Hoffmann
qxl_primary_atomic_disable must check whenever the framebuffer bo has a shadow surface and in case it has check the shadow primary status. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-8-kraxel@redhat.com
2021-02-05drm/qxl: properly pin/unpin shadowGerd Hoffmann
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-7-kraxel@redhat.com
2021-02-05drm/qxl: release shadow on shutdownGerd Hoffmann
In case we have a shadow surface on shutdown release it so it doesn't leak. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-6-kraxel@redhat.com
2021-02-05drm/qxl: unpin release objectsGerd Hoffmann
Balances the qxl_create_bo(..., pinned=true, ...); call in qxl_release_bo_alloc(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-5-kraxel@redhat.com
2021-02-05drm/qxl: use drmm_mode_config_initGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-4-kraxel@redhat.com
2021-02-05Revert "drm/qxl: do not run release if qxl failed to init"Gerd Hoffmann
This reverts commit b91907a6241193465ca92e357adf16822242296d. Patch is broken, it effectively makes qxl_drm_release() a nop because on normal driver shutdown qxl_drm_release() is called *after* drm_dev_unregister(). Fixes: b91907a62411 ("drm/qxl: do not run release if qxl failed to init") Cc: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-3-kraxel@redhat.com
2021-02-04drm/dp_mst: Use DP_MST_LOGICAL_PORT_0 instead of magic numberImre Deak
Use the macro defined for the first logical port instead of the corresponding magic number. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-4-imre.deak@intel.com
2021-02-04drm/dp_mst: Remove redundant tile property settingImre Deak
drm_get_edid() already updates the tile property since commit 2de3a078497b ("drm/dp: Set the connector's TILE property even for DP SST connectors") so no need to update it after calling this function. Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-3-imre.deak@intel.com
2021-02-04drm/dp_mst: Don't cache EDIDs for physical portsImre Deak
Caching EDIDs for physical ports prevents updating the EDID if a port gets reconnected via a Connection Status Notification message, fix this. Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
2021-02-03drm/qxl: do not run release if qxl failed to initTong Zhang
if qxl_device_init() fail, drm device will not be registered, in this case, do not run qxl_drm_release() [ 5.258534] ================================================================== [ 5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.259388] Write of size 8 at addr 00000000000014dc by task modprobe/95 [ 5.259754] [ 5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc6-00007-g88bb507a74ea #62 [ 5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda54 [ 5.260917] Call Trace: [ 5.261056] dump_stack+0x7d/0xa3 [ 5.261245] kasan_report.cold+0x10c/0x10e [ 5.261475] ? qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.261789] check_memory_region+0x17c/0x1e0 [ 5.262029] qxl_destroy_monitors_object+0x42/0xa0 [qxl] [ 5.262332] qxl_modeset_fini+0x9/0x20 [qxl] [ 5.262595] qxl_drm_release+0x22/0x30 [qxl] [ 5.262841] drm_dev_release+0x32/0x50 [ 5.263047] release_nodes+0x39e/0x410 [ 5.263253] ? devres_release+0x40/0x40 [ 5.263462] really_probe+0x2ea/0x420 [ 5.263664] driver_probe_device+0x6d/0xd0 [ 5.263888] device_driver_attach+0x82/0x90 [ 5.264116] ? device_driver_attach+0x90/0x90 [ 5.264353] __driver_attach+0x60/0x100 [ 5.264563] ? device_driver_attach+0x90/0x90 [ 5.264801] bus_for_each_dev+0xe1/0x140 [ 5.265014] ? subsys_dev_iter_exit+0x10/0x10 [ 5.265251] ? klist_node_init+0x61/0x80 [ 5.265464] bus_add_driver+0x254/0x2a0 [ 5.265673] driver_register+0xd3/0x150 [ 5.265882] ? 0xffffffffc0048000 [ 5.266064] do_one_initcall+0x84/0x250 [ 5.266274] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 5.266596] ? unpoison_range+0xf/0x30 [ 5.266801] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 5.267082] ? unpoison_range+0xf/0x30 [ 5.267287] ? unpoison_range+0xf/0x30 [ 5.267491] do_init_module+0xf8/0x350 [ 5.267697] load_module+0x3fe6/0x4340 [ 5.267902] ? vm_unmap_ram+0x1d0/0x1d0 [ 5.268115] ? module_frob_arch_sections+0x20/0x20 [ 5.268375] ? __do_sys_finit_module+0x108/0x170 [ 5.268624] __do_sys_finit_module+0x108/0x170 [ 5.268865] ? __ia32_sys_init_module+0x40/0x40 [ 5.269111] ? file_open_root+0x200/0x200 [ 5.269330] ? do_sys_open+0x85/0xe0 [ 5.269527] ? filp_open+0x50/0x50 [ 5.269714] ? exit_to_user_mode_prepare+0xfc/0x130 [ 5.269978] do_syscall_64+0x33/0x40 [ 5.270176] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 5.270450] RIP: 0033:0x7fa3f685bcf7 [ 5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1 [ 5.271634] RSP: 002b:00007ffca83048d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.272037] RAX: ffffffffffffffda RBX: 0000000001e94a70 RCX: 00007fa3f685bcf7 [ 5.272416] RDX: 0000000000000000 RSI: 0000000001e939e0 RDI: 0000000000000003 [ 5.272794] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 5.273171] R10: 00007fa3f68bf300 R11: 0000000000000246 R12: 0000000001e939e0 [ 5.273550] R13: 0000000000000000 R14: 0000000001e93bd0 R15: 0000000000000001 [ 5.273928] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210203040727.868921-1-ztong0001@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-02-03drm/virtio: fix an error code in virtio_gpu_init()Dan Carpenter
If devm_request_mem_region() fails this code currently returns success but it should return -EBUSY. Fixes: 6076a9711dc5 ("drm/virtio: implement blob resources: probe for host visible region") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwanda Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-02-03drm/nouveau: remove set but not used variable ‘pdev’ in nouveau_bios_initYe Bin
Fix follow warning: drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable] struct pci_dev *pdev; ^~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210123013014.3815870-1-yebin10@huawei.com
2021-02-02drm/vmwgfx: Fix some memory leaks on errorsZack Rusin
Dan noticed some issues with pci_release_region, this builds upon that and fixes some other lingering issues. As part of this we also can stop trying to manually free our managed device; there's no need for it, it will be cleaned up automatically for us. Fixes: 8772c0bb58bb ("drm/vmwgfx: Cleanup pci resource allocation") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com
2021-02-02drm/vc4: remove unneeded variable: "ret"Bernard Zhao
remove unneeded variable: "ret". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
2021-02-02drm: replace drm_modeset_lock_all() in drm_client_modeset_dpms_legacy()Joseph Schulte
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of boilerplate todo in Documentation/gpu/todo.rst Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com
2021-02-02drm/v3d/v3d_sched: fix scheduler callbacks return statusChristian König
Looks like this was not correctly adjusted. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: a6a1f036c74e ("drm/scheduler: Job timeout handler returns status (v3)") Link: https://patchwork.freedesktop.org/patch/msgid/20210201091159.177853-1-christian.koenig@amd.com
2021-02-01drm/gma500: Remove dependency on TTMThomas Zimmermann
The gma500 driver does not use TTM. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de
2021-02-01drm/gma500: Remove CONFIG_X86 conditionals from source filesThomas Zimmermann
Remove the CONFIG_X86 conditionals from the source code. The driver already depends on X86 in the Kconfig file. Also, no one has been trying to build it on a non-x86 platform recently, or they would have noticed that drm_ttm_cache_flush() doesn't exist. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de
2021-02-01drm/gma500: Drop DRM_GMA3600 config optionThomas Zimmermann
With support for the MID-related chips removed, only support for desktop chips is left in the driver. So just build the complete driver if DRM_GMA500 has been selected. Anyone who wants to enable the Poulsbo code would probably also want the Cedarview code. [Patrik: Fixed conflict due to Oaktrail not being dropped] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de
2021-02-01drm/gma500: Remove Medfield supportThomas Zimmermann
Medfield is an outdated mobile platform with apparently no users left. Remove it from gma500. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-2-tzimmermann@suse.de
2021-02-03dma-buf: Avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/990bf6f33ccaf73ad56eb4bea8bd2c0db5e90a31.1598331148.git.joe@perches.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-01-30drm/lima: fix reference leak in lima_pm_busyQinglang Miao
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new function. [0] commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: 50de2e9ebbc0 ("drm/lima: enable runtime pm") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
2021-01-29drm/scheduler: Job timeout handler returns status (v3)Luben Tuikov
This patch does not change current behaviour. The driver's job timeout handler now returns status indicating back to the DRM layer whether the device (GPU) is no longer available, such as after it's been unplugged, or whether all is normal, i.e. current behaviour. All drivers which make use of the drm_sched_backend_ops' .timedout_job() callback have been accordingly renamed and return the would've-been default value of DRM_GPU_SCHED_STAT_NOMINAL to restart the task's timeout timer--this is the old behaviour, and is preserved by this patch. v2: Use enum as the status of a driver's job timeout callback method. v3: Return scheduler/device information, rather than task information. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Eric Anholt <eric@anholt.net> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Steven Price <steven.price@arm.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/415095/
2021-01-28drm/vmwgfx/vmwgfx_drv: Fix an error path in vmw_setup_pci_resources()Dan Carpenter
The devm_memremap() function never returns NULL, it returns error pointers so the test needs to be fixed. Also we need to call pci_release_regions() to avoid a memory leak. Fixes: be4f77ac6884 ("drm/vmwgfx: Cleanup fifo mmio handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/YA6FMboLhnE3uSvb@mwanda
2021-01-28drm/vc4: hdmi: Don't register the CEC adapter if there's no interruptsMaxime Ripard
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Remove cec_available flagDom Cobley
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Support BCM2711 CEC interrupt setupMaxime Ripard
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Split the interrupt handlersMaxime Ripard
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Introduce a CEC clockMaxime Ripard
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Update the CEC clock divider on HSM rate changeMaxime Ripard
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Compute the CEC clock divider from the clock rateMaxime Ripard
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Restore cec physical address on reconnectDom Cobley
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Fix up CEC registersDom Cobley
The commit 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") forgot one CEC register, and made a copy and paste mistake for another one. Fix those mistakes. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-5-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Fix register offset with longer CEC messagesDom Cobley
The code prior to 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Move hdmi reset to bindDom Cobley
The hdmi reset got moved to a later point in the commit 9045e91a476b ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech
2021-01-27drm/omap: dsi: fix unreachable code in dsi_vc_send_short()Menglong Dong
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the 'r < 0' can't be true. Fix this by introducing a 'err' of type 'int' insteaded. Fixes: 1ed6253856cb ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
2021-01-24drm/doc: document the type plane propertySimon Ser
Add a new entry for "type" in the section for standard plane properties. v3: improve paragraph about mixing legacy IOCTLs with explicit usage, note that a driver may support cursors without cursor planes (Daniel) v4: fixing rebase gone wrong v5: - Fix typo (Daniel) - Mention CAP_ATOMIC instead of CAP_UNIVERSAL_PLANES when referring to atomic test-only commits (Daniel) - Add newlines at end of sections (Daniel) Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210115110626.12233-2-contact@emersion.fr
2021-01-22drm/panfrost: Add governor data with pre-defined thresholdsLukasz Luba
The simple_ondemand devfreq governor uses two thresholds to decide about the frequency change: upthreshold, downdifferential. These two tunable change the behavior of the governor decision, e.g. how fast to increase the frequency or how rapidly limit the frequency. This patch adds needed governor data with thresholds values gathered experimentally in different workloads. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121170445.19761-1-lukasz.luba@arm.com
2021-01-22drm/drm_vblank: set the dma-fence timestamp during send_vblank_eventVeera Sundaram Sankaran
The explicit out-fences in crtc are signaled as part of vblank event, indicating all framebuffers present on the Atomic Commit request are scanned out on the screen. Though the fence signal and the vblank event notification happens at the same time, triggered by the same hardware vsync event, the timestamp set in both are different. With drivers supporting precise vblank timestamp the difference between the two timestamps would be even higher. This might have an impact on use-mode frameworks using these fence timestamps for purposes other than simple buffer usage. For instance, the Android framework [1] uses the retire-fences as an alternative to vblank when frame-updates are in progress. Set the fence timestamp during send vblank event using a new drm_send_event_timestamp_locked variant to avoid discrepancies. [1] https://android.googlesource.com/platform/frameworks/native/+/master/ services/surfaceflinger/Scheduler/Scheduler.cpp#397 Changes in v2: - Use drm_send_event_timestamp_locked to update fence timestamp - add more information to commit text Changes in v3: - use same backend helper function for variants of drm_send_event to avoid code duplications Changes in v4: - remove WARN_ON from drm_send_event_timestamp_locked Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: minor parenthesis alignment correction] Link: https://patchwork.freedesktop.org/patch/msgid/1610757107-11892-2-git-send-email-veeras@codeaurora.org
2021-01-22dma-fence: allow signaling drivers to set fence timestampVeera Sundaram Sankaran
Some drivers have hardware capability to get the precise HW timestamp of certain events based on which the fences are triggered. The delta between the event HW timestamp & current HW reference timestamp can be used to calculate the timestamp in kernel's CLOCK_MONOTONIC time domain. This allows it to set accurate timestamp factoring out any software and IRQ latencies. Add a timestamp variant of fence signal function, dma_fence_signal_timestamp to allow drivers to update the precise timestamp for fences. Changes in v2: - Add a new fence signal variant instead of modifying fence struct Changes in v3: - Add timestamp domain information to commit-text and dma_fence_signal_timestamp documentation Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: minor parenthesis alignment] Link: https://patchwork.freedesktop.org/patch/msgid/1610757107-11892-1-git-send-email-veeras@codeaurora.org
2021-01-22dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf ↵John Stultz
instead of fd Every heap needs to create a dmabuf and then export it to a fd via dma_buf_fd(), so to consolidate things a bit, have the heaps just return a struct dmabuf * and let the top level dma_heap_buffer_alloc() call handle creating the fd via dma_buf_fd(). Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: minor reword of commit message] Link: https://patchwork.freedesktop.org/patch/msgid/20210119204508.9256-3-john.stultz@linaro.org
2021-01-22dma-buf: system_heap: Make sure to return an error if we abortJohn Stultz
If we abort from the allocation due to a fatal_signal_pending(), be sure we report an error so any return code paths don't trip over the fact that the allocation didn't succeed. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Suggested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210119204508.9256-1-john.stultz@linaro.org
2021-01-21drm/ttm: device naming cleanupChristian König
Rename ttm_bo_device to ttm_device. Rename ttm_bo_driver to ttm_device_funcs. Rename ttm_bo_global to ttm_global. Move global and device related functions to ttm_device.[ch]. No functional change. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/415222/
2021-01-21drm: Introduce a drm_crtc_commit_wait helperMaxime Ripard
There's currently four users of the same logic to wait for a commit to be flipped: three for the CRTCs, connectors and planes in drm_atomic_helper_wait_for_dependencies, and one in vc4. Let's consolidate this a bit to avoid any code duplication. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210111084401.117152-1-maxime@cerno.tech
2021-01-20drm/vmwgfx: Make sure we unpin no longer needed buffersZack Rusin
We were not correctly unpinning no longer needed buffers. In particular vmw_buffer_object, which is internally often pinned on creation wasn't unpinned on destruction and none of the internal MOB buffers were unpinned before being put back. Technically this existed for a long time but commit 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") introduced a WARN_ON which was filling up the kernel logs rather quickly. Quite frankly internal usage of vmw_buffer_object and in general pinning needs to be refactored in vmwgfx but for now this makes it work. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Fixes: 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") Link: https://patchwork.freedesktop.org/patch/414984/?series=86052&rev=1 Cc: Huang Rui <ray.huang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org
2021-01-20drm: Added orientation quirk for OneGX1 ProJared Baldridge
The OneGX1 Pro has a fairly unique combination of generic strings, but we additionally match on the BIOS date just to be safe. Signed-off-by: Jared Baldridge <jrb@expunge.us> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/41288ccb-1012-486b-81c1-a24c31850c91@www.fastmail.com
generated by cgit (git 2.34.1) at 2025-06-01 03:05:11 +0000