summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-20Merge branch 'topic/ro_wordlength' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7
2020-03-20soundwire: stream: Add read_only_wordlength flag to port propertiesSrinivas Kandagatla
According to SoundWire Specification Version 1.2. "A Data Port number X (in the range 0-14) which supports only one value of WordLength may implement the WordLength field in the DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of WordLength in response to reads." As WSA881x interfaces in PDM mode making the only field "WordLength" in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this register on WSA881x soundwire slave with Qualcomm Soundwire Controller is throwing up an error. Not sure how other controllers deal with writing to readonly registers, but this patch provides a way to avoid writes to DPN_BlockCtrl1 register by providing a read_only_wordlength flag in struct sdw_dpn_prop Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11Merge tag 'v5.6-rc5' into asoc-5.7Mark Brown
Linux 5.6-rc5
2020-03-10ASoC: qcom: use for_each_rtd_codecs/cpus_dai() macroKuninori Morimoto
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7ugogy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-08Merge tag 'edac_urgent-2020-03-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Error reporting fix for synopsys_edac: do not overwrite partial decoded error message (Sherry Sun)" * tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/synopsys: Do not print an error with back-to-back snprintf() calls
2020-03-08Merge tag 'char-misc-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are four small char/misc driver fixes for reported issues for 5.6-rc5. These fixes are: - binder fix for a potential use-after-free problem found (took two tries to get it right) - interconnect core fix - altera-stapl driver fix All four of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: prevent UAF for binderfs devices II interconnect: Handle memory allocation errors altera-stapl: altera_get_note: prevent write beyond end of 'key' binder: prevent UAF for binderfs devices
2020-03-08Merge tag 'driver-core-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs fixes from Greg KH: "Here are four small driver core / debugfs patches for 5.6-rc3: - debugfs api cleanup now that all debugfs_create_regset32() callers have been fixed up. This was waiting until after the -rc1 merge as these fixes came in through different trees - driver core sync state fixes based on reports of minor issues found in the feature All of these have been in linux-next with no reported issues" * tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Skip unnecessary work when device doesn't have sync_state() driver core: Add dev_has_sync_state() driver core: Call sync_state() even if supplier has no consumers debugfs: remove return value of debugfs_create_regset32()
2020-03-08Merge tag 'tty-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty/serial fixes for 5.6-rc5 Just some small serial driver fixes, and a vt core fixup, full details are: - vt fixes for issues found by syzbot - serdev fix for Apple boxes - fsl_lpuart serial driver fixes - MAINTAINER update for incorrect serial files - new device ids for 8250_exar driver - mvebu-uart fix All of these have been in linux-next with no reported issues" * tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fsl_lpuart: free IDs allocated by IDA Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE" serdev: Fix detection of UART devices on Apple machines. MAINTAINERS: Add missed files related to Synopsys DesignWare UART serial: 8250_exar: add support for ACCES cards tty:serial:mvebu-uart:fix a wrong return vt: selection, push sel_lock up vt: selection, push console lock down
2020-03-08Merge tag 'usb-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some small USB and PHY driver fixes for reported issues for 5.6-rc5. Included in here are: - phy driver fixes - new USB quirks - USB cdns3 gadget driver fixes - USB hub core fixes All of these have been in linux-next with no reported issues" * tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Update chain bit correctly when using sg list usb: core: port: do error out if usb_autopm_get_interface() fails usb: core: hub: do error out if usb_autopm_get_interface() fails usb: core: hub: fix unhandled return by employing a void function usb: storage: Add quirk for Samsung Fit flash usb: quirks: add NO_LPM quirk for Logitech Screen Share usb: usb251xb: fix regulator probe and error handling phy: allwinner: Fix GENMASK misuse usb: cdns3: gadget: toggle cycle bit before reset endpoint usb: cdns3: gadget: link trb should point to next request phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling phy: brcm-sata: Correct MDIO operations for 40nm platforms phy: ti: gmii-sel: do not fail in case of gmii phy: ti: gmii-sel: fix set of copy-paste errors phy: core: Fix phy_get() to not return error on link creation failure phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
2020-03-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Nothing particularly exciting, some small ODP regressions from the mmu notifier rework, another bunch of syzkaller fixes, and a bug fix for a botched syzkaller fix in the first rc pull request. - Fix busted syzkaller fix in 'get_new_pps' - this turned out to crash on certain HW configurations - Bug fixes for various missed things in error unwinds - Add a missing rcu_read_lock annotation in hfi/qib - Fix two ODP related regressions from the recent mmu notifier changes - Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm - Revert an old patch in CMA as it is now shown to not be allocating port numbers properly" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/iwcm: Fix iwcm work deallocation RDMA/siw: Fix failure handling during device creation RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing RDMA/odp: Ensure the mm is still alive before creating an implicit child RDMA/core: Fix protection fault in ib_mr_pool_destroy IB/mlx5: Fix implicit ODP race IB/hfi1, qib: Ensure RCU is locked when accessing list RDMA/core: Fix pkey and port assignment in get_new_pps RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen() RDMA/rw: Fix error flow during RDMA context initialization RDMA/core: Fix use of logical OR in get_new_pps Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
2020-03-07Merge tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Here are a few fixes that should go into this release. This contains: - Revert of a bad bcache patch from this merge window - Removed unused function (Daniel) - Fixup for the blktrace fix from Jan from this release (Cengiz) - Fix of deeper level bfqq overwrite in BFQ (Carlo)" * tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block: block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group() blktrace: fix dereference after null check Revert "bcache: ignore pending signals when creating gc and allocator thread" block: Remove used kblockd_schedule_work_on()
2020-03-07Merge tag 'media/v5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a fix for the media controller links in both hantro driver and in v4l2-mem2mem core - some fixes for the pulse8-cec driver - vicodec: handle alpha channel for RGB32 formats, as it may be used - mc-entity.c: fix handling of pad flags * tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: hantro: Fix broken media controller links media: mc-entity.c: use & to check pad flags, not == media: v4l2-mem2mem.c: fix broken links media: vicodec: process all 4 components for RGB32 formats media: pulse8-cec: close serio in disconnect, not adap_free media: pulse8-cec: INIT_DELAYED_WORK was called too late
2020-03-07Merge tag 'for-linus-5.6b-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Four fixes and a small cleanup patch: - two fixes by Dongli Zhang fixing races in the xenbus driver - two fixes by me fixing issues introduced in 5.6 - a small cleanup by Gustavo Silva replacing a zero-length array with a flexible-array" * tag 'for-linus-5.6b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkfront: fix ring info addressing xen/xenbus: fix locking xenbus: req->err should be updated before req->state xenbus: req->body should be updated before req->state xen: Replace zero-length array with flexible-array member
2020-03-06Merge tag 'devicetree-fixes-for-5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: "Another batch of DT fixes. I think this should be the last of it, but sending pull requests seems to cause people to send more fixes. Summary: - Fixes for warnings introduced by hierarchical PSCI binding changes - Fixes for broken doc references due to DT schema conversions - Several grammar and typo fixes - Fix a bunch of dtc warnings in examples" * tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states dt-bindings: power: Extend nodename pattern for power-domain providers MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry dt-bindings: bus: Drop empty compatible string in example dt-bindings: power: Convert domain-idle-states bindings to json-schema dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI dt-bindings: arm: Correct links to idle states definitions dt-bindings: mfd: Fix typo in file name of twl-familly.txt dt-bindings: mfd: tps65910: Improve grammar dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad") dt-bindings: arm: fsl: fix APF6Dev compatible dt-bindings: Fix dtc warnings in examples docs: dt: fix several broken doc references docs: dt: fix several broken references due to renames MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX
2020-03-06Merge tag 'drm-fixes-2020-03-06-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull vgacon fix from Daniel Vetter: "One vgacon input check for stable" * tag 'drm-fixes-2020-03-06-1' of git://anongit.freedesktop.org/drm/drm: vgacon: Fix a UAF in vgacon_invert_region
2020-03-06Merge tag 'spi-fix-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A selection of small fixes, mostly for drivers, that have arrived since the merge window. None of them are earth shattering in themselves but all useful for affected systems" * tag 'spi-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi_register_controller(): free bus id on error paths spi: bcm63xx-hsspi: Really keep pll clk enabled spi: atmel-quadspi: fix possible MMIO window size overrun spi/zynqmp: remove entry that causes a cs glitch spi: pxa2xx: Add CS control clock quirk spi: spidev: Fix CS polarity if GPIO descriptors are used spi: qup: call spi_qup_pm_resume_runtime before suspending spi: spi-omap2-mcspi: Support probe deferral for DMA channels spi: spi-omap2-mcspi: Handle DMA size restriction on AM65x
2020-03-06Merge tag 'regulator-fix-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small fixes, one for a minor issue in the stm32-vrefbuf driver and a documentation fix in the Qualcomm code" * tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling regulator: qcom_spmi: Fix docs for PM8004
2020-03-06Merge tag 'hwmon-for-v5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix an error return in the adt7462 driver, bad voltage limits reported by the xdpe12284 driver, and a broken documentation reference in the adm1177 driver documentation" * tag 'hwmon-for-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT() hwmon: (pmbus/xdpe12284) Add callback for vout limits conversion docs: adm1177: fix a broken reference
2020-03-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here are another three arm64 fixes for 5.6, all pretty minor. Main thing is fixing a silly bug in the fsl_imx8_ddr PMU driver where we would zero the counters when disabling them. - Fix misreporting of ASID limit when KPTI is enabled - Fix busted NULL pointer checks for GICC structure in ACPI PMU code - Avoid nobbling the "fsl_imx8_ddr" PMU counters when disabling them" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: context: Fix ASID limit in boot messages drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
2020-03-06vgacon: Fix a UAF in vgacon_invert_regionZhang Xiaoxu
When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
2020-03-06tty: serial: fsl_lpuart: free IDs allocated by IDAMichael Walle
Since commit 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") the port line number can also be allocated by IDA, but in case of an error the ID will no be removed again. More importantly, any ID will be freed in remove(), even if it wasn't allocated but instead fetched by of_alias_get_id(). If it was not allocated by IDA there will be a warning: WARN(1, "ida_free called for id=%d which is not allocated.\n", id); Move the ID allocation more to the end of the probe() so that we still can use plain return in the first error cases. Fixes: 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") Signed-off-by: Michael Walle <michael@walle.cc> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200303174306.6015-3-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"Michael Walle
This reverts commit a659652f6169240a5818cb244b280c5a362ef5a4. This broke the earlycon on LS1021A processors because the order of the earlycon_setup() functions were changed. Before the commit the normal lpuart32_early_console_setup() was called. After the commit the lpuart32_imx_early_console_setup() is called instead. Fixes: a659652f6169 ("tty: serial: fsl_lpuart: drop EARLYCON_DECLARE") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200303174306.6015-2-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06serdev: Fix detection of UART devices on Apple machines.Ronald Tschalär
On Apple devices the _CRS method returns an empty resource template, and the resource settings are instead provided by the _DSM method. But commit 33364d63c75d6182fa369cea80315cf1bb0ee38e (serdev: Add ACPI devices by ResourceSource field) changed the search for serdev devices to require valid, non-empty resource template, thereby breaking Apple devices and causing bluetooth devices to not be found. This expands the check so that if we don't find a valid template, and we're on an Apple machine, then just check for the device being an immediate child of the controller and having a "baud" property. Cc: <stable@vger.kernel.org> # 5.5 Fixes: 33364d63c75d ("serdev: Add ACPI devices by ResourceSource field") Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20200211194723.486217-1-ronald@innovation.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06Merge tag 'devprop-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Revert a problematic commit from the 5.3 development cycle (Brendan Higgins)" * tag 'devprop-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "software node: Simplify software_node_release() function"
2020-03-06Merge tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes round, looks like a few people woke up, got a bunch of fixes across the drivers. Bit bigger than I'd like but they all seem fine and hopefully it quiets down now. sun4i, kirin, mediatek and exynos on the ARM side. virtio-gpu and core have some mmap fixes, and there is a dma-buf leak. one ttm fence leak is also fixed. Otherwise it's mostly amdgpu and i915. One of the i915 fixes is for a very long latency I was seeing (using latencytop) running gnome-shell locally when using firefox and eating nearly all my RAM, it really helps with desktop responsiveness esp when firefox is chewing a lot. dma-buf: - fix memory leak core: - shmem object mmap fix. ttm: - Fix fence leak in ttm_buffer_object_transfer(). amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix i915: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer virtio: - Fix resource id creation race in virtio. - mmap fixes sun4i: - Fixes for sun4i VI layer format support. kirin: - kirin: Revert "Fix for hikey620 display offset problem" exynos: - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. mediatek: - overlay, cursor and gce fixes" ` * tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drm: (38 commits) drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS case drm/amd/powerplay: fix pre-check condition for setting clock range drm/amd/display: fix dcc swath size calculations on dcn1 drm/amd/display: Clear link settings on MST disable connector drm/amdgpu: disable 3D pipe 1 on Navi1x drm/amdgpu: clean wptr on wb when gpu recovery drm: kirin: Revert "Fix for hikey620 display offset problem" drm/i915/gt: Drop the timeline->mutex as we wait for retirement drm/i915/perf: Reintroduce wait on OA configuration completion drm/sun4i: Fix DE2 VI layer format support drm/sun4i: Add separate DE3 VI layer formats drm/sun4i: de2/de3: Remove unsupported VI layer formats drm/i915/selftests: Fix return in assert_mmap_offset() drm/i915: Protect i915_request_await_start from early waits drm/i915/tgl: Add Wa_1608008084 drm/i915/tgl: Add Wa_22010178259:tgl drm/i915: Program MBUS with rmw during initialization drm/i915/psr: Force PSR probe only after full initialization drm/i915/gem: Break up long lists of object reclaim ...
2020-03-06Merge tag 'amd-drm-fixes-5.6-2020-03-05' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-05: amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305185957.4268-1-alexander.deucher@amd.com
2020-03-06Merge tag 'drm-intel-fixes-2020-03-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc5: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87eeu7nl6z.fsf@intel.com
2020-03-06Merge tag 'drm-misc-fixes-2020-03-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6.rc5: - dma-buf fix memory leak - Fix resource id creation race in virtio. - Various mmap fixes. - Fix fence leak in ttm_buffer_object_transfer(). - Fixes for sun4i VI layer format support. - kirin: Revert "Fix for hikey620 display offset problem" Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/56de63c7-0cdf-5805-e268-44944af7fef2@linux.intel.com
2020-03-05serial: 8250_exar: add support for ACCES cardsJay Dolan
Add ACCES VIDs and PIDs that use the Exar chips Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200305140504.22237-1-jay.dolan@accesio.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05tty:serial:mvebu-uart:fix a wrong returntangbin
in this place, the function should return a negative value and the PTR_ERR already returns a negative,so return -PTR_ERR() is wrong. Signed-off-by: tangbin <tangbin@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200305013823.20976-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V update from Wei Liu: - Update MAINTAINERS file for Hyper-V - One cleanup patch for Hyper-V HID driver * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: HID: hyperv: NULL check before some freeing functions is not needed. Hyper-V: add myself as a maintainer Hyper-V: Drop Sasha Levin from the Hyper-V maintainers
2020-03-05Merge tag 'dmaengine-fix-5.6-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - Doc updates to clean warnings for dmaengine - Fixes for newly added Intel idxd driver - More fixes for newly added TI k3-udma driver - Fixes for IMX and Tegra drivers" * tag 'dmaengine-fix-5.6-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-sdma: Fix the event id check to include RX event for UART6 dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list dmaengine: tegra-apb: Fix use-after-free dmaengine: imx-sdma: fix context cache dmaengine: idxd: wq size configuration needs to check global max size dmaengine: idxd: sysfs input of wq incorrect wq type should return error dmaengine: coh901318: Fix a double lock bug in dma_tc_handle() dmaengine: idxd: correct reserved token calculation dmaengine: ti: k3-udma: Fix terminated transfer handling dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic dmaengine: ti: k3-udma: Move the TR counter calculation to helper function dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup() dmaengine: doc: fix warnings/issues of client.rst dmaengine: idxd: fix runaway module ref count on device driver bind
2020-03-05xen/blkfront: fix ring info addressingJuergen Gross
Commit 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") made struct blkfront_ring_info size dynamic. This is fine when running with only one queue, but with multiple queues the addressing of the single queues has to be adapted as the structs are allocated in an array. Fixes: 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200305155129.28326-1-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xen/xenbus: fix lockingJuergen Gross
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200305100323.16736-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xenbus: req->err should be updated before req->stateDongli Zhang
This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.com Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xenbus: req->body should be updated before req->stateDongli Zhang
The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Link: https://lore.kernel.org/r/20200303221423.21962-1-dongli.zhang@oracle.com Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume ↵Hersen Wu
from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/display: Clear link settings on MST disable connectorBhawanpreet Lakha
[Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amdgpu: disable 3D pipe 1 on Navi1xTianci.Yin
[why] CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there is no use case. [how] Disable 3D pipe 1 on Navi1x. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05HID: hyperv: NULL check before some freeing functions is not needed.Lucas Tanure
Fix below warnings reported by coccicheck: drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-03-05drm/amdgpu: clean wptr on wb when gpu recoveryYintian Tao
The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05Merge tag 'mediatek-drm-fixes-5.6' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Mediatek DRM Fixes for Linux 5.6 Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1583373069.364.4.camel@mtksdaap41
2020-03-05Merge tag 'exynos-drm-fixes-for-v5.6-rc5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three fixups - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1583126752-30477-1-git-send-email-inki.dae@samsung.com
2020-03-04Revert "software node: Simplify software_node_release() function"Brendan Higgins
This reverts commit 3df85a1ae51f6b256982fe9d17c2dc5bfb4cc402. The reverted commit says "It's possible to release the node ID immediately when fwnode_remove_software_node() is called, no need to wait for software_node_release() with that." However, releasing the node ID before waiting for software_node_release() to be called causes the node ID to be released before the kobject and the underlying sysfs entry; this means there is a period of time where a sysfs entry exists that is associated with an unallocated node ID. Once consequence of this is that there is a race condition where it is possible to call fwnode_create_software_node() with no parent node specified (NULL) and have it fail with -EEXIST because the node ID that was assigned is still associated with a stale sysfs entry that hasn't been cleaned up yet. Although it is difficult to reproduce this race condition under normal conditions, it can be deterministically reproduced with the following minconfig on UML: CONFIG_KUNIT_DRIVER_PE_TEST=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_KOBJECT_RELEASE=y CONFIG_KUNIT=y Running the tests with this configuration causes the following failure: <snip> kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400) ok 1 - pe_test_uints sysfs: cannot create duplicate filename '/kernel/software_nodes/node0' CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14 <snip> kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory. kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100) # pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123 Expected node is not error, but is: -17 not ok 2 - pe_test_uint_arrays <snip> Reported-by: Heidi Fahim <heidifahim@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04Merge tag 'for-5.6/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix request-based DM's congestion_fn and actually wire it up to the bdi. - Extend dm-bio-record to track additional struct bio members needed by DM integrity target. - Fix DM core to properly advertise that a device is suspended during unload (between the presuspend and postsuspend hooks). This change is a prereq for related DM integrity and DM writecache fixes. It elevates DM integrity's 'suspending' state tracking to DM core. - Four stable fixes for DM integrity target. - Fix crash in DM cache target due to incorrect work item cancelling. - Fix DM thin metadata lockdep warning that was introduced during 5.6 merge window. - Fix DM zoned target's chunk work refcounting that regressed during recent conversion to refcount_t. - Bump the minor version for DM core and all target versions that have seen interface changes or important fixes during the 5.6 cycle. * tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: bump version of core and various targets dm: fix congested_fn for request-based device dm integrity: use dm_bio_record and dm_bio_restore dm bio record: save/restore bi_end_io and bi_integrity dm zoned: Fix reference counter initial value of chunk works dm writecache: verify watermark during resume dm: report suspended device during destroy dm thin metadata: fix lockdep complaint dm cache: fix a crash due to incorrect work item cancelling dm integrity: fix invalid table returned due to argument count mismatch dm integrity: fix a deadlock due to offloading to an incorrect workqueue dm integrity: fix recalculation when moving from journal mode to bitmap mode
generated by cgit (git 2.34.1) at 2024-06-20 05:49:58 +0000