| Age | Commit message (Collapse) | Author |
|---|
|
|
|
After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs
attributes"), on x86_64, if only below kernel configs related to kdump are
set, compiling error are triggered.
----
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
------
------------------------------------------------------
drivers/base/cpu.c: In function `crash_hotplug_show':
drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration]
309 | return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support());
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| crash_hotplug_show
cc1: some warnings being treated as errors
------------------------------------------------------
CONFIG_KEXEC is used to enable kexec_load interface, the
crash_notes/crash_notes_size/crash_hotplug showing depends on
CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead.
Fix it now.
Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com
Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
device registration for fw_unit. We rarely encounter the issue, but it
should be applied to stable releases, since it fixes inappropriate API
usage"
* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix possible memory leak in create_units()
|
|
Pull vfio fixes from Alex Williamson:
- Fix the lifecycle of a mutex in the pds variant driver such that a
reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex. Also
switch a different lock from spinlock to mutex as the code path has
the potential to sleep and doesn't need the spinlock context
otherwise (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get an
undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which resolves
some of this symbol ugliness, but also fixes Kconfig dependencies
(Sean Christopherson)
* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
vfio/pds: Fix possible sleep while in atomic context
vfio/pds: Fix mutex lock->magic != lock warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the Xen event driver setting the correct return value when
experiencing an allocation failure
- A fix for allocating space for a struct in the percpu area to not
cross page boundaries (this one is for x86, a similar one for Arm was
already in the pull request for rc3)
* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: fix error code in xen_bind_pirq_msi_to_irq()
x86/xen: fix percpu vcpu_info allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
in the power-capping DTPM framework.
Specifics:
- Fix the AMD P-state driver's EPP sysfs interface in the cases when
the performance governor is in use (Ayush Jain)
- Make the ->fast_switch() callback in the AMD P-state driver return
the target frequency as expected (Gautham R. Shenoy)
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny)
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent
performance states votes from runtime-suspended devices from being
lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
(Stephan Gerhold)
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph
Niedermaier)
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba)"
* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Only print supported EPP values for performance governor
cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
powercap: DTPM: Fix unneeded conversions to micro-Watts
cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
pointer dereference in the ACPI backlight driver due to a design issue
exposed by a recent change in the ACPI bus type code.
Specifics:
- Fix a recently introduced build issue on ARM32 platforms caused by
an inadvertent header file breakage (Dave Jiang)
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer
dereferences after recent ACPI core changes (Hans de Goede)"
* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Use acpi_video_device for cooling-dev driver data
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix printk arg in of_iommu_get_resv_regions()
iommu/vt-d: Set variable intel_dirty_ops to static
iommu/vt-d: Fix incorrect cache invalidation for mm notification
iommu/vt-d: Add MTL to quirk list to skip TE disabling
iommu/vt-d: Make context clearing consistent with context mapping
iommu/vt-d: Disable PCI ATS in legacy passthrough mode
iommu/vt-d: Omit devTLB invalidation requests when TES=0
iommu/vt-d: Support enforce_cache_coherency only for empty domains
iommu: Avoid more races around device probe
MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
iommu: Flow ERR_PTR out from __iommu_domain_alloc()
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly amdgpu fixes with a scattering of nouveau, i915,
and a couple of reverts. Hopefully it will quieten down in coming
weeks.
drm:
- Revert unexport of prime helpers for fd/handle conversion
dma_resv:
- Do not double add fences in dma_resv_add_fence.
gpuvm:
- Fix GPUVM license identifier.
i915:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
panel:
- Revert panel fixes as they require exporting device_is_dependent.
nouveau:
- fix oversized allocations in new vm path
- fix zero-length array
- remove a stray lock
nt36523:
- Fix error check for nt36523.
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()"
* tag 'drm-fixes-2023-12-01' of git://anongit.freedesktop.org/drm/drm: (53 commits)
Revert "drm/prime: Unexport helpers for fd/handle conversion"
drm/amdgpu: Use another offset for GC 9.4.3 remap
drm/amd/display: Fix some HostVM parameters in DML
drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit
drm/amdgpu: Update EEPROM I2C address for smu v13_0_0
drm/amd/display: Allow DTBCLK disable for DCN35
drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer
drm/amd: Enable PCIe PME from D3
drm/amd/pm: fix a memleak in aldebaran_tables_init
drm/amdgpu: fix AGP addressing when GART is not at 0
drm/amd/display: update dcn315 lpddr pstate latency
drm/amd/display: fix ABM disablement
drm/amd/display: Fix black screen on video playback with embedded panel
drm/amd/display: Fix conversions between bytes and KB
drm/amdkfd: Use common function for IP version check
drm/amd/display: Remove config update
drm/amd/display: Update DCN35 clock table policy
drm/amd/display: force toggle rate wa for first link training for a retimer
drm/amdgpu: correct the amdgpu runtime dereference usage count
drm/amd/display: Update min Z8 residency time to 2100 for DCN314
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Invalid namespace identification error handling (Marizio Ewan,
Keith)
- Fabrics keep-alive tuning (Mark)
- Fix for a bad error check regression in bcache (Markus)
- Fix for a performance regression with O_DIRECT (Ming)
- Fix for a flush related deadlock (Ming)
- Make the read-only warn on per-partition (Yu)
* tag 'block-6.7-2023-12-01' of git://git.kernel.dk/linux:
nvme-core: check for too small lba shift
blk-mq: don't count completed flush data request as inflight in case of quiesce
block: Document the role of the two attribute groups
block: warn once for each partition in bio_check_ro()
block: move .bd_inode into 1st cacheline of block_device
nvme: check for valid nvme_identify_ns() before using it
nvme-core: fix a memory leak in nvme_ns_info_from_identify()
nvme: fine-tune sending of first keep-alive
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's FEC support to always initialize IO before it
frees it. Also fix alignment of struct dm_verity_fec_io within the
per-bio-data
- Fix DM verity target to not FEC failed readahead IO
- Update DM flakey target to use MAX_ORDER rather than MAX_ORDER - 1
* tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-flakey: start allocating with MAX_ORDER
dm-verity: align struct dm_verity_fec_io properly
dm verity: don't perform FEC for failed readahead IO
dm verity: initialize fec io before freeing it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, one in drivers.
The core changes are to the internal representation of flags in
scsi_devices which removes space wasting bools in favour of single bit
flags and to add a flag to force a runtime resume which is used by ATA
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix system start for ATA devices
scsi: Change SCSI device boolean fields to single bit flags
scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode
|
|
Pull more bcachefs bugfixes from Kent Overstreet:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times)
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
bcachefs: Extra kthread_should_stop() calls for copygc
bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
bcachefs: Fix race between btree writes and metadata drop
bcachefs: move journal seq assertion
bcachefs: -EROFS doesn't count as move_extent_start_fail
bcachefs: trace_move_extent_start_fail() now includes errcode
bcachefs: Fix split_race livelock
bcachefs: Fix bucket data type for stripe buckets
bcachefs: Add missing validation for jset_entry_data_usage
bcachefs: Fix zstd compress workspace size
bcachefs: bpos is misaligned on big endian
bcachefs: Fix ec + durability calculation
bcachefs: Data update path won't accidentaly grow replicas
bcachefs: deallocate_extra_replicas()
bcachefs: Proper refcounting for journal_keys
bcachefs: preserve device path as device name
bcachefs: Fix an endianness conversion
bcachefs: Start gc, copygc, rebalance threads after initing writes ref
bcachefs: Don't stop copygc thread on device resize
bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
...
|
|
Merge a power capping fix for 6.7-rc4 which eliminates unnecessary
and harmful conversions to uW from the DTPM (dynamic thermal and power
management) framework (Lukasz Luba).
* powercap:
powercap: DTPM: Fix unneeded conversions to micro-Watts
|
|
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The variable phys is defined as (struct resource *) which aligns with
the printk format specifier %pr. Taking the address of it results in a
value of type (struct resource **) which is incompatible with the format
specifier %pr. Therefore, remove the address of operator (&).
Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.7-2023-11-30:
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()
drm:
- Revert unexport of prime helpers for fd/handle conversion
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130213135.5083-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Avoid polling for the scmi_perf_domain on arm
* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: arm: Avoid polling for scmi_perf_domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix CQE error recovery path
MMC host:
- cqhci: Fix CQE error recovery path
- sdhci-pci-gli: Fix initialization of LPM
- sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"
* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
mmc: sdhci-pci-gli: Disable LPM during initialization
mmc: cqhci: Fix task clearing in CQE error recovery
mmc: cqhci: Warn of halt or task clear failure
mmc: block: Retry commands in CQE error recovery
mmc: block: Be sure to wait while busy in CQE error recovery
mmc: cqhci: Increase recovery halt timeout
mmc: block: Do not lose cache flush during CQE error recovery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Remove duplicate sysfs entry 'color' from LEDs class
* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: class: Don't expose color sysfs entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Fix for EFI unaccepted memory handling
* tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix off-by-one when checking for overlapping ranges
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v6.7-rc4:
- Revert panel fixes as they require exporting device_is_dependent.
- Do not double add fences in dma_resv_add_fence.
- Fix GPUVM license identifier.
- Assorted nouveau fixes.
- Fix error check for nt36523.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/561f807e-f9d3-43c1-80d3-8b41ba83c9ec@linux.intel.com
|
|
This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3.
These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.
CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:
$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
echo 11c30000.ethernet > bind; done
It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:
1/ as a result of bind success the user space open/configures the
interfaces tough an IOCTL; the following stack trace has been
identified on RZ/G3S:
Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198
2/ this call may execute concurrently with ravb_remove() as the
unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
while the above ravb_open() is in progress it may lead to MAC
(or PHY, or MAC-PHY connection, the right point hasn't been identified
at the moment) to be broken, thus the Ethernet connectivity fails to
restore.
The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.
To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:
int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
// ...
rtnl_lock();
ret = -ENODEV;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!dev)
goto done;
// ...
done:
rtnl_unlock();
out:
return ret;
}
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().
Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
registers
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.
Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.
Fixes: 0d13a1a464a0 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.
Cc: stable@vger.kernel.org
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs
The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources. Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.
To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure. Then after the process
is complete, move the resources back to the currently active interface.
There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-30
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).
The main changes are:
1) Fix AF_UNIX splat from use after free in BPF sockmap,
from John Fastabend.
2) Fix a syzkaller splat in netdevsim by properly handling offloaded
programs (and not device-bound ones), from Stanislav Fomichev.
3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
from Hou Tao.
4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
netdevsim: Don't accept device bound programs
====================
Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If device_register() fails, the refcount of device is not 0, the name
allocated in dev_set_name() is leaked. To fix this by calling put_device(),
so that it will be freed in callback function kobject_cleanup().
unreferenced object 0xffff9d99035c7a90 (size 8):
comm "systemd-udevd", pid 168, jiffies 4294672386 (age 152.089s)
hex dump (first 8 bytes):
66 77 30 2e 30 00 ff ff fw0.0...
backtrace:
[<00000000e1d62bac>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000bbeaff31>] __kmalloc_node_track_caller+0x44/0x1a0
[<00000000491f2fb4>] kvasprintf+0x67/0xd0
[<000000005b960ddc>] kobject_set_name_vargs+0x1e/0x90
[<00000000427ac591>] dev_set_name+0x4e/0x70
[<000000003b4e447d>] create_units+0xc5/0x110
fw_unit_release() will be called in the error path, move fw_device_get()
before calling device_register() to keep balanced with fw_device_put() in
fw_unit_release().
Cc: stable@vger.kernel.org
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Fixes: a1f64819fe9f ("firewire: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs.
Use 0x1A000 offset instead as MMIO register remap region.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A number of DML parameters related to HostVM were either missing or
being set incorrectly, which may cause inaccuracies in calculating
margins and determining BW limitations.
[How]
Correct these values where needed and populate the missing values.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Memory leaks of gang_ctx_bo and wptr_bo.
[How]
Free gang_ctx_bo and wptr_bo in pqm_uninit.
v2: add a common function pqm_clean_queue_resource to
free queue's resources.
v3: reset pdd->pqd.num_gws when destorying GWS queue.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check smu v13_0_0 SKU type to select EEPROM I2C address.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
[Why]
DTBCLK is enabled on idle and it will burn power.
[How]
There's a few issues here:
- Always enabling DTBCLK on clock manager init
- Setting refclk when DTBCLK is supposed to be disabled
- Not applying the correct calculated version refclk, but instead the
base value which might be zero
On dtbclk_en change we'll message PMFW to enable or disable the clock
accordingly.
The DTBDTO will be then based on refclk, but it will be set to the
default fixed value if there was nothing calculated in DML despite the
clock being considered enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.
So, add null pointer judgment before calling.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When kzalloc() for smu_table->ecc_table fails, we should free
the previously allocated resources to prevent memleak.
Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This worked by luck if the GART aperture ended up at 0. When
we ended up moving GART on some chips, the GART aperture ended
up offsetting the AGP address since the resource->start is
a GART offset, not an MC address. Fix this by moving the AGP
address setup into amdgpu_bo_gpu_offset_no_check().
v2: check mem_type before checking agp
v3: check if the ttm bo has a ttm_tt allocated yet
Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11")
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reported-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: christian.koenig@amd.com
Cc: mario.limonciello@amd.com
|
|
[WHY/HOW]
Increase the pstate latency to improve ac/dc transition
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On recent versions of DMUB firmware, if we want to completely disable
ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM
level to DMUB. Otherwise, LCD eDP displays are unable to reach their
maximum brightness levels. So, to fix this whenever the user requests an
ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also,
to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE
to 0 when a user tries to read the requested ABM level.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
We have dynamic power control in driver but
should be ignored when power is forced on.
[how]
Bypass any power control when it's forced on.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There are a number of instances where we convert HostVMMinPageSize or
GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and
vice versa.
Additionally, in some cases, a parameter is passed through DML in KB but
later checked as if it were in bytes.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KFD_GC_VERSION was recently updated to use a new function
for IP version checks. As a result, use KFD_GC_VERSION as
the common function for all IP version checks in KFD.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
