| Age | Commit message (Collapse) | Author |
|---|
|
Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()
Wolfram Sang has asked to have this included in 5.7 so the deprecated
API can be removed next release. There should be no functional
difference.
I think that entire this section of code can be removed; it is
leftover from other things that have since changed, but this is the
safer thing to do for now. The full removal can happen next release"
* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
char: ipmi: convert to use i2c_new_client_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:
- A handful of TI driver fixes for bad of_node_put() and incorrect
parent names
- Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
work so we use a composite clk now
- Resuming from suspend on Tegra Jetson TK1 was broken because an
audio PLL calculated an incorrect rate
- A fix for devicetree probing on IM-PD1 by actually specifying a clk
name which is required to pass clk registration
- Avoid list corruption if registration fails for a critical clk"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: convert subclocks to use proper names also
clk: ti: am33xx: fix RTC clock parent
clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
clk: tegra: Fix initial rate for pll_a on Tegra124
clk: impd1: Look up clock-output-names
clk: Unlink clock if failed to prepare or enable
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 5.7-rc6
The "largest" in here is a bunch of raw-gadget fixes and api changes
as the driver just showed up in -rc1 and work has been done to fix up
some uapi issues found with the original submission, before it shows
up in a -final release.
Other than that, a bunch of other small USB gadget fixes, xhci fixes,
some quirks, andother tiny fixes for reported issues.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: gadget: fix illegal array access in binding with UDC
usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
USB: usbfs: fix mmap dma mismatch
usb: host: xhci-plat: keep runtime active when removing host
usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
usb: cdns3: gadget: make a bunch of functions static
usb: mtu3: constify struct debugfs_reg32
usb: gadget: udc: atmel: Make some symbols static
usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
usb: raw-gadget: documentation updates
usb: raw-gadget: support stalling/halting/wedging endpoints
usb: raw-gadget: fix gadget endpoint selection
usb: raw-gadget: improve uapi headers comments
usb: typec: mux: intel: Fix DP_HPD_LVL bit field
usb: raw-gadget: fix return value of ep read ioctls
usb: dwc3: select USB_ROLE_SWITCH
usb: gadget: legacy: fix error return code in gncm_bind()
usb: gadget: legacy: fix error return code in cdc_bind()
usb: gadget: legacy: fix redundant initialization warnings
usb: gadget: tegra-xudc: Fix idle suspend/resume
...
|
|
Pull block fix from Jens Axboe:
"Just a single NVMe pull in here, with a single fix for a missing DMA
read memory barrier for completions"
* tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block:
nvme-pci: dma read memory barrier for completions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes, some a bit overly ripe, sorry about
that. We have important systems like Intel laptops and Qualcomm mobile
chips covered.
- Pad lock register on Intel Sunrisepoint had the wrong offset
- Fix pin config setting for the Baytrail GPIO chip
- Fix a compilation warning in the Mediatek driver
- Fix a function group name in the Actions driver
- Fix a behaviour bug in the edge polarity code in the Qualcomm
driver
- Add a missing spinlock in the Intel Cherryview driver
- Add affinity callbacks to the Qualcomm MSMGPIO chip"
* tag 'pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip
pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler
pinctrl: qcom: fix wrong write in update_dual_edge
pinctrl: actions: fix function group name for i2c0_group
pinctrl: mediatek: remove shadow variable declaration
pinctrl: baytrail: Enable pin configuration setting for GPIO chip
pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H
|
|
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"A few minor bug fixes for user visible defects, and one regression:
- Various bugs from static checkers and syzkaller
- Add missing error checking in mlx4
- Prevent RTNL lock recursion in i40iw
- Fix segfault in cxgb4 in peer abort cases
- Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could
be lost, and wasn't delivered to all the FDs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobj
RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL event
RDMA/iw_cxgb4: Fix incorrect function parameters
RDMA/core: Fix double put of resource
IB/core: Fix potential NULL pointer dereference in pkey cache
IB/hfi1: Fix another case where pq is left on waitlist
IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()
IB/mlx4: Test return value of calls to ib_get_cached_pkey
RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
i40iw: Fix error handling in i40iw_manage_arp_cache()
|
|
Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.
Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix ADC access synchronization problem with da9052 driver
- Fix temperature limit and status reporting in nct7904 driver
- Fix drivetemp temperature reporting if SCT is supported but SCT data
tables are not.
* tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (da9052) Synchronize access with mfd
hwmon: (nct7904) Fix incorrect range of temperature limit registers
hwmon: (nct7904) Read all SMI status registers in probe function
hwmon: (drivetemp) Fix SCT support if SCT data tables are not supported
|
|
Pull drm fixes from Dave Airlie:
"As mentioned last week an i915 PR came in late, but I left it, so the
i915 bits of this cover 2 weeks, which is why it's likely a bit larger
than usual.
Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix.
i915:
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate error from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
tegra:
- tegra120/4 smmu fixes
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
meson:
- error code propogation fix"
* tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/i915: Handle idling during i915_gem_evict_something busy loops
drm/meson: pm resume add return errno branch
drm/amd/amdgpu: Update update_config() logic
drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
drm/i915: Mark concurrent submissions with a weak-dependency
drm/i915: Propagate error from completed fences
drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
drm/amd/display: add basic atomic check for cursor plane
drm/amd/display: Fix vblank and pageflip event handling for FreeSync
drm/amdgpu: implement soft_recovery for gfx10
drm/amdgpu: enable hibernate support on Navi1X
drm/amdgpu: Use GEM obj reference for KFD BOs
drm/amdgpu: force fbdev into vram
drm/amd/powerplay: perform PG ungate prior to CG ungate
drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
drm/i915/execlists: Track inflight CCID
drm/i915/execlists: Avoid reusing the same logical CCID
drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
...
|
|
FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.
Reference: https://www.spinics.net/lists/linux-usb/msg194331.html
This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.
The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.
BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208
CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
flush_write_buffer fs/configfs/file.c:251 [inline]
configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
__vfs_write+0x85/0x110 fs/read_write.c:494
vfs_write+0x1cd/0x510 fs/read_write.c:558
ksys_write+0x18a/0x220 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:620
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.
The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].
Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.
To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.
Tested on H3ULCB + Kingfisher rev. M05.
[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any
Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.7-rc6
The main part here are the important fixes for the raw-gadget before it
becomes an ABI. We're adding support for stall/halt/wedge which is
actually pretty important in many situations. There's also a NULL
pointer deref fix.
Apart from raw-gadget, I've included some recent sparse fixes to a few
drivers.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: cdns3: gadget: make a bunch of functions static
usb: mtu3: constify struct debugfs_reg32
usb: gadget: udc: atmel: Make some symbols static
usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
usb: raw-gadget: documentation updates
usb: raw-gadget: support stalling/halting/wedging endpoints
usb: raw-gadget: fix gadget endpoint selection
usb: raw-gadget: improve uapi headers comments
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Just one meson patch this time to propagate an error code
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514073538.wvdtv5s2mt4wdrdj@gilmour.lan
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate errror from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression
+(Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake
+(Sultan)
- Avoid dereferencing a dead context (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514040235.GA2164266@intel.com
|
|
This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!
Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().
Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the
BCM54810 PHY.
Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move away from the deprecated API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20200326210958.13051-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix a couple of quite severe issues for the CQE request path
MMC host:
- alcor: Fix a resource leak in the error path for ->probe()
- sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
- sdhci-pci-gli: Fix system resume support for GL975x
- sdhci-pci-gli: Fix reboot error for GL9750"
* tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
mmc: block: Fix request completion in the CQE timeout path
mmc: core: Fix recursive locking issue in CQE recovery path
mmc: core: Check request type before completing the request
mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
mmc: alcor: Fix a resource leak in the error path for ->probe()
mmc: sdhci-pci-gli: Fix no irq handler from suspend
|
|
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I
recommend it's easier for understanding to make the "ready-interrupt"
a bundle for it is a parallel description as "shutdown" which is appended
after the slash.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.
Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.
Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Prevent the suspend-to-idle internal loop from busy spinning after a
spurious ACPI SCI wakeup in some cases"
* tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
|
|
In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers. Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.
Thanks to Christoph for the quick idea of how to fix this.
Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While removing the host (e.g. for USB role switch from host to device),
if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3
platforms.
Keeping the xhci-plat device active during host removal, and disabling
runtime pm before calling pm_runtime_set_suspended() fixes them.
oops1:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000240
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty
Hardware name: FSL i.MX8MP EVK (DT)
Workqueue: pm pm_runtime_work
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : xhci_suspend+0x34/0x698
lr : xhci_plat_runtime_suspend+0x2c/0x38
sp : ffff800011ddbbc0
Call trace:
xhci_suspend+0x34/0x698
xhci_plat_runtime_suspend+0x2c/0x38
pm_generic_runtime_suspend+0x28/0x40
__rpm_callback+0xd8/0x138
rpm_callback+0x24/0x98
rpm_suspend+0xe0/0x448
rpm_idle+0x124/0x140
pm_runtime_work+0xa0/0xf8
process_one_work+0x1dc/0x370
worker_thread+0x48/0x468
kthread+0xf0/0x120
ret_from_fork+0x10/0x1c
oops2:
usb 2-1: USB disconnect, device number 2
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb2: USB disconnect, device number 1
xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb1: USB disconnect, device number 1
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000138
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578
Hardware name: Freescale i.MX8QXP MEK (DT)
Workqueue: 1-0050 tcpm_state_machine_work
pstate: 20000005 (nzCv daif -PAN -UAO)
pc : xhci_free_dev+0x214/0x270
lr : xhci_plat_runtime_resume+0x78/0x88
sp : ffff80001006b5b0
Call trace:
xhci_free_dev+0x214/0x270
xhci_plat_runtime_resume+0x78/0x88
pm_generic_runtime_resume+0x30/0x48
__rpm_callback+0x90/0x148
rpm_callback+0x28/0x88
rpm_resume+0x568/0x758
rpm_resume+0x260/0x758
rpm_resume+0x260/0x758
__pm_runtime_resume+0x40/0x88
device_release_driver_internal+0xa0/0x1c8
device_release_driver+0x1c/0x28
bus_remove_device+0xd4/0x158
device_del+0x15c/0x3a0
usb_disable_device+0xb0/0x268
usb_disconnect+0xcc/0x300
usb_remove_hcd+0xf4/0x1dc
xhci_plat_remove+0x78/0xe0
platform_drv_remove+0x30/0x50
device_release_driver_internal+0xfc/0x1c8
device_release_driver+0x1c/0x28
bus_remove_device+0xd4/0x158
device_del+0x15c/0x3a0
platform_device_del.part.0+0x20/0x90
platform_device_unregister+0x28/0x40
cdns3_host_exit+0x20/0x40
cdns3_role_stop+0x60/0x90
cdns3_role_set+0x64/0xd8
usb_role_switch_set_role.part.0+0x3c/0x68
usb_role_switch_set_role+0x20/0x30
tcpm_mux_set+0x60/0xf8
tcpm_reset_port+0xa4/0xf0
tcpm_detach.part.0+0x28/0x50
tcpm_state_machine_work+0x12ac/0x2360
process_one_work+0x1c8/0x470
worker_thread+0x50/0x428
kthread+0xfc/0x128
ret_from_fork+0x10/0x18
Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01)
---[ end trace 45b1a173d2679e44 ]---
[minor commit message cleanup -Mathias]
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: <stable@vger.kernel.org>
Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.
<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3
<2> sp : ca337c80 ip : 00000000 fp : ffffffff
<2> r10: 00000000 r9 : 50037000 r8 : 00004000
<2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000
<2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000
<2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
<2> Control: 10c0383d Table: b412c06a DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)
The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.
Fix this by check for the sg before any attributes of the sg are
accessed.
[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142d04 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following sparse warning:
drivers/usb/cdns3/gadget.c:85:6: warning: symbol
'cdns3_clear_register_bit' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:140:26: warning: symbol
'cdns3_next_align_buf' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:151:22: warning: symbol
'cdns3_next_priv_request' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:193:5: warning: symbol 'cdns3_ring_size' was
not declared. Should it be static?
drivers/usb/cdns3/gadget.c:348:6: warning: symbol
'cdns3_move_deq_to_next_trb' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:514:20: warning: symbol
'cdns3_wa2_gadget_giveback' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:554:5: warning: symbol
'cdns3_wa2_gadget_ep_queue' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:839:6: warning: symbol
'cdns3_wa1_restore_cycle_bit' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:1907:6: warning: symbol
'cdns3_stream_ep_reconfig' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:1928:6: warning: symbol
'cdns3_configure_dmult' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
mtu3_prb_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
19966 7120 0 27086 69ce drivers/usb/mtu3/mtu3_debugfs.o
After:
text data bss dec hex filename
20142 6992 0 27134 69fe drivers/usb/mtu3/mtu3_debugfs.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Fix the following sparse warnings:
drivers/usb/gadget/udc/atmel_usba_udc.c:188:30: warning: symbol 'queue_dbg_fops' was not declared.
drivers/usb/gadget/udc/atmel_usba_udc.c:196:30: warning: symbol 'regs_dbg_fops' was not declared.
queue_dbg_fops and regs_dbg_fops have only call within atmel_usba_udc.c
They should be static
Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Currently we preassign gadget endpoints to raw-gadget endpoints during
initialization. Fix resetting this assignment in raw_ioctl_ep_disable(),
otherwise we will get null-ptr-derefs when an endpoint is reenabled.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Raw Gadget is currently unable to stall/halt/wedge gadget endpoints,
which is required for proper emulation of certain USB classes.
This patch adds a few more ioctls:
- USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when
there's a pending setup request for it.
- USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status
on non-control non-isochronous endpoints.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Currently automatic gadget endpoint selection based on required features
doesn't work. Raw Gadget tries iterating over the list of available
endpoints and finding one that has the right direction and transfer type.
Unfortunately selecting arbitrary gadget endpoints (even if they satisfy
feature requirements) doesn't work, as (depending on the UDC driver) they
might have fixed addresses, and one also needs to provide matching
endpoint addresses in the descriptors sent to the host.
The composite framework deals with this by assigning endpoint addresses
in usb_ep_autoconfig() before enumeration starts. This approach won't work
with Raw Gadget as the endpoints are supposed to be enabled after a
set_configuration/set_interface request from the host, so it's too late to
patch the endpoint descriptors that had already been sent to the host.
For Raw Gadget we take another approach. Similarly to GadgetFS, we allow
the user to make the decision as to which gadget endpoints to use.
This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that
exposes information about all non-control endpoints that a currently
connected UDC has. This information includes endpoints addresses, as well
as their capabilities and limits to allow the user to choose the most
fitting gadget endpoint.
The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint
validation routine usb_gadget_ep_match_desc().
These changes affect the portability of the gadgets that use Raw Gadget
when running on different UDCs. Nevertheless, as long as the user relies
on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically
choose endpoint addresses, UDC-agnostic gadgets can still be written with
Raw Gadget.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.7-2020-05-13:
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514034046.3988-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.7
This contains a pair of patches which fix SMMU support on Tegra124 and
Tegra210 for host1x and the Tegra DRM driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508101355.3031268-1-thierry.reding@gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508052437.GA3212215@intel.com
|
|
phy_restart_aneg() enables aneg in the PHY. That's not what we want
if phydev->autoneg is disabled. In this case still update EEE
advertisement register, but don't enable aneg and don't trigger an
aneg restart.
Fixes: f75abeb8338e ("net: phy: restart phy autonegotiation after EEE advertisment change")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
i915_gem_evict_something() is charged with finding a slot within the GTT
that we may reuse. Since our goal is not to stall, we first look for a
slot that only overlaps idle vma. To this end, on the first pass we move
any active vma to the end of the search list. However, we only stopped
moving active vma after we see the first active vma twice. If during the
search, that first active vma completed, we would not notice and keep on
extending the search list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk
(cherry picked from commit 73e28cc40bf00b5d168cb8f5cff1ae63e9097446)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we the dedicated Broadcom PHY driver
(CONFIG_BROADCOM_PHY) is enabled for this to happen.
Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix to return negative error code -ENOMEM from the smcd_alloc_dev()
error handling case instead of 0, as done elsewhere in this function.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tsi-as-adc is configured it is possible for in7[0123]_input read to
return an incorrect value if a concurrent read to in[456]_input is
performed. This is caused by a concurrent manipulation of the mux
channel without proper locking as hwmon and mfd use different locks for
synchronization.
Switch hwmon to use the same lock as mfd when accessing the TSI channel.
Fixes: 4f16cab19a3d5 ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi>
[rebase to current master, reword commit message slightly]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The format of temperature limitation registers are 8-bit 2's complement
and the range is -128~127.
Converts the reading value to signed char to fix the incorrect range
of temperature limitation registers.
Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When nct7904 power up, it compares current sensor readings against the
default threshold immediately. This results in false alarms on startup.
Read all SMI status registers in probe function to clear the alarms.
Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
[groeck: Reworded description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, the PMC HPD request LVL bit field is bit 4.
Fix the definition here to match the programming guide.
Since this bit field is changing, explicitly define a field for the
HPD_HIGH mode data bit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200511091837.102508-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.7-rc5
Fixing raw-gadget's IOCTL return value. Enabling EXTCON for Intel
Merrifield. Couple leaks have been plugged in net2272 and
twl6030-usb. Returning an error code when things fail in cdc and ncm
legacy gadgets. An old bug on dwc3 regarding HWO bit handling has been
fixed.
Apart from these, some minor fixes.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: raw-gadget: fix return value of ep read ioctls
usb: dwc3: select USB_ROLE_SWITCH
usb: gadget: legacy: fix error return code in gncm_bind()
usb: gadget: legacy: fix error return code in cdc_bind()
usb: gadget: legacy: fix redundant initialization warnings
usb: gadget: tegra-xudc: Fix idle suspend/resume
usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()'
usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'
usb: cdns3: gadget: prev_req->trb is NULL for ep0
usb: gadget: audio: Fix a missing error return value in audio_bind()
usb: dwc3: pci: Enable extcon driver for Intel Merrifield
dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
|
|
pm_resump api did not handle drm_mode_config_helper_resume error.
This change add handle to return drm_mode_config_helper_resume`s
error number. This code logic is aligned with api pm_suspend.
After this change, the code maybe a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428131747.2099-1-bernard@vivo.com
|
|
Addition of the new internal API to get the clkctrl names missed adding
the same conversion in place for the subclocks. This leads into missed
parent/child relationships (i.e. orphaned clocks) with mixed node name
handling, for example with omap4/omap5 where the l4_per clocks are using
new naming, but rest are using old. Fix by converting the subclock
registration to pick correct names for the clocks also.
Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200430083451.8562-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Right now, trying to use RTC purely with the ti-sysc / clkctrl framework
fails to enable the RTC module properly. Based on experimentation, this
appears to be because RTC is sourced from the clkdiv32k optional clock.
TRM is not very clear on this topic, but fix the RTC to use the proper
source clock nevertheless.
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200424152301.4018-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
clkctrl_get_name incorrectly calls of_node_put when it is not really
doing of_node_get. This causes a boot time warning later on:
[ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segmen
t@0/target-module@5000/cm_core_aon@0/ipu-cm@500/ipu1-clkctrl@20
Fix by dropping the of_node_put from the function.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200424124725.9895-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
Pull one Rockchip clk fix from Heiko Stuebner:
- Fix for wrongly defines rk3228 aclk_gpu*
* tag 'v5.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
|
|
pll_a_out0 and the I2S clocks are already configured to default to rates
corresponding to a 44.1 kHz sampling rate, but the pll_a configuration
was set to a default that is not listed in the frequency table, which
caused the PLL code to compute an invalid configuration. As a result of
this invalid configuration, Jetson TK1 fails to resume from suspend.
This used to get papered over because the ASoC driver would force audio
clocks to a 44.1 kHz configuration on boot. However, that's not really
necessary and was hence removed in commit ff5d18cb04f4 ("ASoC: tegra:
Enable audio mclk during tegra_asoc_utils_init()").
Fix the initial rate for pll_a so that it matches the 44.1 kHz entry in
the pll_a frequency table.
Fixes: ff5d18cb04f4 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lkml.kernel.org/r/20200505071655.644773-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
