summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-20Merge tag 'pinctrl-v5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "There is an ACPI stubs fix which is ACKed by the ACPI maintainer for merging through my tree. One item stand out and that is that I delete the <linux/sdb.h> header that is used by nothing. I deleted this subsystem (through the GPIO tree) a while back so I feel responsible for tidying up the floor. Other than that it is the usual mistakes, a bit noisy around build issue and Kconfig then driver fixes. Specifics: - Fix some stubs causing compile issues for ACPI. - Fix some wakeups on AMD IRQs shared between GPIO and SCI. - Fix a build warning in the Tegra driver. - Fix a Kconfig issue in the Qualcomm driver. - Add a missing include the RALink driver. - Return a valid type for the Apple pinctrl IRQs. - Implement some Qualcomm SDM845 dual-edge errata. - Remove the unused <linux/sdb.h> header. (The subsystem was once deleted by the pinctrl maintainer...) - Fix a duplicate initialized in the Tegra driver. - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver" * tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sm8350: Correct UFS and SDC offsets pinctrl: tegra194: remove duplicate initializer again Remove unused header <linux/sdb.h> pinctrl: qcom: sdm845: Enable dual edge errata pinctrl: apple: Always return valid type in apple_gpio_irq_type pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c' pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group() pinctrl: amd: Fix wakeups when IRQ is shared with SCI ACPI: Add stubs for wakeup handler functions
2021-11-20Merge tag 's390-5.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add missing Kconfig option for ftrace direct multi sample, so it can be compiled again, and also add s390 support for this sample. - Update Christian Borntraeger's email address. - Various fixes for memory layout setup. Besides other this makes it possible to load shared DCSS segments again. - Fix copy to user space of swapped kdump oldmem. - Remove -mstack-guard and -mstack-size compile options when building vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and results in broken vdso code which causes more or less random exceptions. Also remove the not needed -nostdlib option. - Fix memory leak on cpu hotplug and return code handling in kexec code. - Wire up futex_waitv system call. - Replace snprintf with sysfs_emit where appropriate. * tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: ftrace/samples: add s390 support for ftrace direct multi sample ftrace/samples: add missing Kconfig option for ftrace direct multi sample MAINTAINERS: update email address of Christian Borntraeger s390/kexec: fix memory leak of ipl report buffer s390/kexec: fix return code handling s390/dump: fix copying to user-space of swapped kdump oldmem s390: wire up sys_futex_waitv system call s390/vdso: filter out -mstack-guard and -mstack-size s390/vdso: remove -nostdlib compiler flag s390: replace snprintf in show functions with sysfs_emit s390/boot: simplify and fix kernel memory layout setup s390/setup: re-arrange memblock setup s390/setup: avoid using memblock_enforce_memory_limit s390/setup: avoid reserving memory above identity mapping
2021-11-19Merge tag 'libata-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: - Prevent accesses to unsupported log pages as that causes device scan failures with LLDDs using libsas (from me). - A couple of fixes for AMD AHCI adapters handling of low power modes and resume (from Mario). - Fix a compilation warning (from me). * tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Declare ata_ncq_sdev_attrs static ata: libahci: Adjust behavior when StorageD3Enable _DSD is set ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile ata: libata: add missing ata_identify_page_supported() calls ata: libata: improve ata_read_log_page() error message
2021-11-19Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change to fix a regression in user space device state setting, which is used by the iscsi daemons to effect device recovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() scsi: ufs: core: Fix another task management completion race scsi: ufs: core: Fix task management completion timeout race scsi: core: sysfs: Fix hang when device state is set via sysfs scsi: iscsi: Unblock session then wake up error handler scsi: ufs: core: Improve SCSI abort handling
2021-11-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "There are a few big regression items from the merge window suggesting that people are testing rc1's but not testing the for-next branches: - Warnings fixes - Crash in hf1 when creating QPs and setting counters - Some old mlx4 cards fail to probe due to missing counters - Syzkaller crash in the new counters code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update for VMware PVRDMA driver RDMA/nldev: Check stat attribute before accessing it RDMA/mlx4: Do not fail the registration on port stats IB/hfi1: Properly allocate rdma counter desc memory RDMA/core: Set send and receive CQ before forwarding to the driver RDMA/netlink: Add __maybe_unused to static inline in C file
2021-11-19Merge tag 'gpio-fixes-for-v5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a coccicheck warning in gpio-virtio - fix gpio selftests build issues - fix a Kconfig issue in gpio-rockchip * tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors selftests: gpio: restore CFLAGS options selftests: gpio: fix uninitialised variable warning selftests: gpio: fix gpio compiling error gpio: virtio: remove unneeded semicolon
2021-11-19Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This week's fixes, pretty quiet, about right for rc2. amdgpu is the bulk of them but the scheduler ones have been reported in a few places I think. Otherwise just some minor i915 fixes and a few other scattered around: scheduler: - two refcounting fixes cma-helper: - use correct free path for noncoherent efifb: - probing fix amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix i915: - return error handling fix - ADL-P display fix - TGL DSI display clocks fix nouveau: - infoframe corruption fix sun4i: - Kconfig fix" * tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/amdgpu: fix potential memleak drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors drm/amd/display: Fix OLED brightness control on eDP drm/amd/pm: Remove artificial freq level on Navi1x drm/amd/pm: avoid duplicate powergate/ungate setting drm/amdgpu: add error print when failing to add IP block(v2) drm/amd/pm: Enhanced reporting also for a stuck command drm/i915/guc: fix NULL vs IS_ERR() checking drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping" fbdev: Prevent probing generic drivers if a FB is already registered drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder drm/scheduler: fix drm_sched_job_add_implicit_dependencies drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY drm/cma-helper: Release non-coherent memory with dma_free_noncoherent() drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
2021-11-19Merge tag 'amd-drm-fixes-5.16-2021-11-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-11-17: amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
2021-11-19Merge tag 'drm-intel-fixes-2021-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
2021-11-18Merge tag 'thermal-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix the handling of thermal zones during system resume and disable building of the int340x thermal driver on 32-bit. Specifics: - Prevent the previous high and low thermal zone trip values from being retained over a system suspend-resume cycle (Manaf Meethalavalappu Pallikunhi) - Prevent the int340x thermal driver from being built in 32-bit kernel configurations, because running it on 32-bit is questionable (Arnd Bergmann)" * tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Reset previous low and high trip during thermal zone init thermal: int340x: Limit Kconfig to 64-bit
2021-11-18Merge tag 'pm-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a system-wide suspend issue in the DTPM framework and improve the Energy Model documentation. Specifics: - Fix system suspend handling in DTPM when it is enabled, but not actually used (Daniel Lezcano) - Describe the new cpufreq callback for Energy Model registration and explain the "advanced" and "simple" EM variants in the EM documentation (Lukasz Luba)" * tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: power: Describe 'advanced' and 'simple' EM models Documentation: power: Add description about new callback for EM registration powercap: DTPM: Fix suspend failure and kernel warning
2021-11-18Merge tag 'acpi-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert the change attempting to release PM resources blocked by unused ACPI objects after device enumeration, because it caused boot issues to appear on multiple systems" * tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Release PM resources blocked by unused objects"
2021-11-18Merge tag 'platform-drivers-x86-v5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Various build- and bug-fixes as well as one hardware-id addition" * tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: think-lmi: Abort probe on analyze failure platform/x86: dell-wmi-descriptor: disable by default platform/x86: samsung-laptop: Fix typo in a comment platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
2021-11-18Merge tag 'spi-fix-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
2021-11-18Merge tag 'for-5.16/parisc-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "parisc bug and warning fixes and wire up futex_waitv. Fix some warnings which showed up with allmodconfig builds, a revert of a change to the sigreturn trampoline which broke signal handling, wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig" * tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig Revert "parisc: Reduce sigreturn trampoline to 3 instructions" parisc: Wrap assembler related defines inside __ASSEMBLY__ parisc: Wire up futex_waitv parisc: Include stringify.h to avoid build error in crypto/api.c parisc/sticon: fix reverse colors
2021-11-18Merge branch 'thermal-int340x'Rafael J. Wysocki
Merge int340x thermal driver Kconfig fix for 5.16-rc2. * thermal-int340x: thermal: int340x: Limit Kconfig to 64-bit
2021-11-18ptp: ocp: Fix a couple NULL vs IS_ERR() checksDan Carpenter
The ptp_ocp_get_mem() function does not return NULL, it returns error pointers. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi
type3_infoblock() The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue
bound In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller
queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-11-17 This series contains updates to i40e driver only. Eryk adds accounting for VLAN header in packet size when VF port VLAN is configured. He also fixes TC queue distribution when the user has changed queue counts as well as for configuration of VF ADQ which caused dropped packets. Michal adds tracking for when a VSI is being released to prevent null pointer dereference when managing filters. Karen ensures PF successfully initiates VF requested reset which could cause a call trace otherwise. Jedrzej moves validation of channel queue value earlier to prevent partial configuration when the value is invalid. Grzegorz corrects the reported error when adding filter fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18e100: fix device suspend/resumeJesse Brandeburg
As reported in [1], e100 was no longer working for suspend/resume cycles. The previous commit mentioned in the fixes appears to have broken things and this attempts to practice best known methods for device power management and keep wake-up working while allowing suspend/resume to work. To do this, I reorder a little bit of code and fix the resume path to make sure the device is enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214933 Fixes: 69a74aef8a18 ("e100: use generic power management") Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reported-by: Alexey Kuznetsov <axet@me.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Alexey Kuznetsov <axet@me.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in ↵Teng Qi
hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18ata: libata-sata: Declare ata_ncq_sdev_attrs staticDamien Le Moal
Since ata_ncq_sdev_attrs is a local struct, declare it static. This avoids a sparse warning at compile time. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: libahci: Adjust behavior when StorageD3Enable _DSD is setMario Limonciello
The StorageD3Enable _DSD is used for the vendor to indicate that the disk should be opted into or out of a different behavior based upon the platform design. For AMD's Renoir and Green Sardine platforms it's important that any attached SATA storage has transitioned into DevSlp when s2idle is used. If the disk is left in active/partial/slumber, then the system is not able to resume properly. When the StorageD3Enable _DSD is detected, check the system is using s2idle and DevSlp is enabled and if so explicitly wait long enough for the disk to enter DevSlp. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: ahci: Add Green Sardine vendor ID as board_ahci_mobileMario Limonciello
AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly. commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: libata: add missing ata_identify_page_supported() callsDamien Le Moal
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(), make sure to check for the existence of the IDENTIFY DEVICE data log and of the log page accessed using ata_identify_page_supported(). This avoids useless error messages from ata_read_log_page() and failures with some LLDD scsi drivers using libsas. Reported-by: Nikolay <knv418@gmail.com> Cc: stable@kernel.org # 5.15 Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Matthew Perkowski <mgperkow@gmail.com>
2021-11-17octeontx2-af: debugfs: don't corrupt user memoryDan Carpenter
The user supplies the "count" value to say how big its read buffer is. The rvu_dbg_lmtst_map_table_display() function does not take the "count" into account but instead just copies the whole table, potentially corrupting the user's data. Introduce the "ret" variable to store how many bytes we can copy. Also I changed the type of "off" to size_t to make using min() simpler. Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117073454.GD5237@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17drm/amd/amdgpu: fix potential memleakBernard Zhao
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered againshaoyunl
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUsPerry Yuan
add support that allow the userspace tool like RGP to get the GFX clock value at runtime, the fix follow the old way to show the min/current/max clocks level for compatible consideration. === Test === $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz * 1: 1100Mhz 2: 1600Mhz then run stress test on one APU system. $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz 1: 1040Mhz * 2: 1600Mhz The current GFXCLK value is updated at runtime. BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260 Reviewed-by: Huang Ray <Ray.Huang@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga ↵hongao
and dvi connectors amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by: hongao <hongao@uniontech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amd/display: Fix OLED brightness control on eDPRoman Li
[Why] After commit ("drm/amdgpu/display: add support for multiple backlights") number of eDPs is defined while registering backlight device. However the panel's extended caps get updated once before register call. That leads to regression with extended caps like oled brightness control. [How] Update connector ext caps after register_backlight_device Fixes: 7fd13baeb7a3a4 ("drm/amdgpu/display: add support for multiple backlights") Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/ Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Samuel Čavoj <samuel@cavoj.net> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17i40e: Fix display error code in dmesgGrzegorz Szczurek
Fix misleading display error in dmesg if tc filter return fail. Only i40e status error code should be converted to string, not linux error code. Otherwise, we return false information about the error. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix creation of first queue by omitting it if is not power of twoJedrzej Jagielski
Reject TCs creation with proper message if the first queue assignment is not equal to the power of two. The first queue number was checked too late in the second queue iteration, if second queue was configured at all. Now if first queue value is not a power of two, then trying to create qdisc will be rejected. Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix warning message and call stack during rmmod i40e driverKaren Sornek
Restore part of reset functionality used when reset is called from the VF to reset itself. Without this fix warning message is displayed when VF is being removed via sysfs. Fix the crash of the VF during reset by ensuring that the PF receives the reset message successfully. Refactor code to use one function instead of two. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17drm/amd/pm: Remove artificial freq level on Navi1xLijo Lazar
Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/pm: avoid duplicate powergate/ungate settingEvan Quan
Just bail out if the target IP block is already in the desired powergate/ungate state. This can avoid some duplicate settings which sometimes may cause unexpected issues. Link: https://lore.kernel.org/all/YV81vidWQLWvATMM@zn.tnic/ Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789 Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Borislav Petkov <bp@suse.de> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amdgpu: add error print when failing to add IP block(v2)Guchun Chen
Driver initialization is driven by IP version from IP discovery table. So add error print when failing to add ip block during driver initialization, this will be more friendly to user to know which IP version is not correct. [ 40.467361] [drm] host supports REQ_INIT_DATA handshake [ 40.474076] [drm] add ip block number 0 <nv_common> [ 40.474090] [drm] add ip block number 1 <gmc_v10_0> [ 40.474101] [drm] add ip block number 2 <psp> [ 40.474103] [drm] add ip block number 3 <navi10_ih> [ 40.474114] [drm] add ip block number 4 <smu> [ 40.474119] [drm] add ip block number 5 <amdgpu_vkms> [ 40.474134] [drm] add ip block number 6 <gfx_v10_0> [ 40.474143] [drm] add ip block number 7 <sdma_v5_2> [ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init [ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device. v2: use dev_err to multi-GPU system Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/pm: Enhanced reporting also for a stuck commandLuben Tuikov
Also print the message index and parameter of the stuck command. Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17RDMA/nldev: Check stat attribute before accessing itLeon Romanovsky
The access to non-existent netlink attribute causes to the following kernel panic. Fix it by checking existence before trying to read it. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6744 Comm: syz-executor.0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u32 include/net/netlink.h:1554 [inline] RIP: 0010:nldev_stat_set_mode_doit drivers/infiniband/core/nldev.c:1909 [inline] RIP: 0010:nldev_stat_set_doit+0x578/0x10d0 drivers/infiniband/core/nldev.c:2040 Code: fa 4c 8b a4 24 f8 02 00 00 48 b8 00 00 00 00 00 fc ff df c7 84 24 80 00 00 00 00 00 00 00 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 02 RSP: 0018:ffffc90004acf2e8 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90002b94000 RDX: 0000000000000000 RSI: ffffffff8684c5ff RDI: 0000000000000004 RBP: ffff88807cda4000 R08: 0000000000000000 R09: ffff888023fb8027 R10: ffffffff8684c5d7 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: ffff888041024280 R15: ffff888031ade780 FS: 00007eff9dddd700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ef24000 CR3: 0000000036902000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x86d/0xda0 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 822cf785ac6d ("RDMA/nldev: Split nldev_stat_set_mode_doit out of nldev_stat_set_doit") Link: https://lore.kernel.org/r/b21967c366f076ff1988862f9c8a1aa0244c599f.1637151999.git.leonro@nvidia.com Reported-by: syzbot+9111d2255a9710e87562@syzkaller.appspotmail.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-17RDMA/mlx4: Do not fail the registration on port statsJack Wang
If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver will fail the ib_setup_port_attrs, which is called from ib_register_device()/enable_device_and_get(), in the end leads to device not detected[1][2] To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT. [1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094 [2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com Fixes: 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants") Link: https://lore.kernel.org/r/20211115101519.27210-1-jinpu.wang@ionos.com Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-17Revert "ACPI: scan: Release PM resources blocked by unused objects"Rafael J. Wysocki
Revert commit c10383e8ddf4 ("ACPI: scan: Release PM resources blocked by unused objects"), because it causes boot issues to appear on some platforms. Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com> Reported-by: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-17i40e: Fix ping is lost after configuring ADq on VFEryk Rybak
Properly reconfigure VF VSIs after VF request ADQ. Created new function to update queue mapping and queue pairs per TC with AQ update VSI. This sets proper RSS size on NIC. VFs num_queue_pairs should not be changed during setup of queue maps. Previously, VF main VSI in ADQ had configured too many queues and had wrong RSS size, which lead to packets not being consumed and drops in connectivity. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix changing previously set num_queue_pairs for PFsEryk Rybak
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in TCs on a VSI's alloc_queue_pairs member which is not changed throughout any user's action (for example via ethtool's set_channels callback). This implies that vsi->tc_config.tc_info[n].qcount value that is given to the kernel via netdev_set_tc_queue() that notifies about the count of queues per particular traffic class is constant even if user has changed the total count of queues. This in turn caused the kernel warning after setting the queue count to the lower value than the initial one: $ ethtool -l ens801f0 Channel parameters for ens801f0: Pre-set maximums: RX: 0 TX: 0 Other: 1 Combined: 64 Current hardware settings: RX: 0 TX: 0 Other: 1 Combined: 64 $ ethtool -L ens801f0 combined 40 [dmesg] Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled! Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used to set the qcount on TC0 (by default only TC0 exists so all of the existing queues are assigned to TC0). we update the offset/qcount via netdev_set_tc_queue() back to the old value but then the netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a value which got set to 40. Fix it by using vsi->req_queue_pairs as a queue count that will be distributed across TCs. Do it only for non-zero values, which implies that user actually requested the new count of queues. For VSIs other than main, stay with the vsi->alloc_queue_pairs as we only allow manipulating the queue count on main VSI. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix NULL ptr dereference on VSI filter syncMichal Maloszewski
Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com> Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix correct max_pkt_size on VF RX queueEryk Rybak
Setting VLAN port increasing RX queue max_pkt_size by 4 bytes to take VLAN tag into account. Trigger the VF reset when setting port VLAN for VF to renegotiate its capabilities and reinitialize. Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17net: ax88796c: use bit numbers insetad of bit masksŁukasz Stelmach
Change the values of EVENT_* constants from bit masks to bit numbers as accepted by {clear,set,test}_bit() functions. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: dpaa2-eth: fix use-after-free in dpaa2_eth_removePavel Skripkin
Access to netdev after free_netdev() will cause use-after-free bug. Move debug log before free_netdev() call to avoid it. Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: usb: r8152: Add MAC passthrough support for more Lenovo DocksAaron Ma
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original Realtek USB ethernet chip ID 0bda:8153. Lenovo Docks always use their own IDs for usb hub, even for older Docks. If parent hub is from Lenovo, then r8152 should try MAC passthrough. Verified on Lenovo TBT3 dock too. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-07 21:20:17 +0000