| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
|
|
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
|
|
Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out. This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:
RTNL: assertion failed at net/wireless/reg.c (4025)
WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
Call Trace:
iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
iwl_opmode_register+0xd0/0x130 [iwlwifi]
init_module+0x23/0x1000 [iwlmvm]
Fix this by adding the missing rtnl_lock() back to the code.
Fixes: eb09ae93dabf ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor arch kdump DT related code to a common implementation
- Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
'resets', and 'pwm' properties
- Various clean-ups to DT FDT code
- Fix a runtime error for !CONFIG_SYSFS
- Convert Synopsys DW PCI and derivative binding docs to schemas. Add
Toshiba Visconti PCIe binding.
- Convert a bunch of memory controller bindings to schemas
- Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.
- Extend nvmem bindings to handle bit offsets in unit-addresses
- Add DT schemas for HiKey 970 PCIe PHY
- Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings
- Enable dtc pci_device_reg warning by default
- Fixes for handling 'unevaluatedProperties' in preparation to enable
pending support in the tooling for jsonschema 2020-12 draft
* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
dt-bindings: display: remove zte,vou.txt binding doc
dt-bindings: hwmon: merge max1619 into trivial devices
dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
dt-bindings: Add vendor prefix for Topic Embedded Systems
of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
arm64: kdump: Remove custom linux,usable-memory-range handling
arm64: kdump: Remove custom linux,elfcorehdr handling
riscv: Remove non-standard linux,elfcorehdr handling
of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
of: fdt: Add generic support for handling usable memory range property
of: fdt: Add generic support for handling elf core headers property
crash_dump: Make elfcorehdr address/size symbols always visible
dt-bindings: memory: convert Samsung Exynos DMC to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
kbuild: Enable dtc 'pci_device_reg' warning by default
dt-bindings: soc: remove obsolete zte zx header
dt-bindings: clock: remove obsolete zte zx header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- make Hyper-V code arch-agnostic (Michael Kelley)
- fix sched_clock behaviour on Hyper-V (Ani Sinha)
- fix a fault when Linux runs as the root partition on MSHV (Praveen
Kumar)
- fix VSS driver (Vitaly Kuznetsov)
- cleanup (Sonia Sharma)
* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
Drivers: hv: Enable Hyper-V code to be built on ARM64
arm64: efi: Export screen_info
arm64: hyperv: Initialize hypervisor on boot
arm64: hyperv: Add panic handler
arm64: hyperv: Add Hyper-V hypercall and register access utilities
x86/hyperv: fix root partition faults when writing to VP assist page MSR
hv: hyperv.h: Remove unused inline functions
drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
Drivers: hv: Add arch independent default functions for some Hyper-V handlers
Drivers: hv: Make portions of Hyper-V init code be arch neutral
x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
asm-generic/hyperv: Add missing #include of nmi.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
|
|
Single spaces has been removed and replaced with tabs.
This is done to maintain code uniformity.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are a few intensive changes in ALSA core side at this time that
helped with significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for
controlling the explicit sync of the stream control; it'll be used
for ASoC SOF and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support"
* tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits)
ASoC: Revert PCM trigger changes
ALSA: usb-audio: Add lowlatency module option
ALSA: hda/cs8409: Initialize Codec only in init fixup.
ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary
ALSA: usb-audio: Work around for XRUN with low latency playback
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ASoC: soc-pcm: test refcount before triggering
ASoC: soc-pcm: protect BE dailink state changes in trigger
ASoC: wcd9335: Disable irq on slave ports in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Fix a double irq free in the remove function
ALSA: hda: Disable runtime resume at shutdown
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Improve dma data transfer efficiency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e890605 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae00a ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull ibft updates from Konrad Rzeszutek Wilk:
"A fix for iBFT parsing code badly interfacing when KASLR is enabled"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: fix warning in reserve_ibft_region()
iscsi_ibft: fix crash due to KASLR physical memory remapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM infrastructure for IMA-based remote attestion. These changes
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured via
IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
* tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: use in_hardirq() instead of deprecated in_irq()
dm ima: update dm documentation for ima measurement support
dm ima: update dm target attributes for ima measurements
dm ima: add a warning in dm_init if duplicate ima events are not measured
dm ima: prefix ima event name related to device mapper with dm_
dm ima: add version info to dm related events in ima log
dm ima: prefix dm table hashes in ima log with hash algorithm
dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
dm: add documentation for IMA measurement support
dm: update target status functions to support IMA measurement
dm ima: measure data on device rename
dm ima: measure data on table clear
dm ima: measure data on device remove
dm ima: measure data on device resume
dm ima: measure data on table load
dm writecache: add event counters
dm writecache: report invalid return from writecache_map helpers
dm writecache: further writecache_map() cleanup
dm writecache: factor out writecache_map_remap_origin()
dm writecache: split up writecache_map() to improve code readability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Usual driver changes, some documentation that should hopefully get LED
names standartized, and many fixes"
* tag 'leds-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (32 commits)
leds: pca955x: Switch to i2c probe_new
leds: pca955x: Let the core process the fwnode
leds: pca955x: Implement the default-state property
leds: pca955x: Add brightness_get function
leds: pca955x: Clean up code formatting
leds: leds-core: Implement the retain-state-shutdown property
dt-bindings: leds: Add retain-state-shutdown boolean
Documentation: leds: standartizing LED names
leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA
leds: lp50xx: Fix chip name in KConfig
leds: pwm: add support for default-state device property
leds: move default_state read from fwnode to core
leds: flash: Remove redundant initialization of variable ret
leds: lgm-sso: Propagate error codes from callee to caller
leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
leds: rt8515: Put fwnode in any case during ->probe()
leds: lt3593: Put fwnode in any case during ->probe()
leds: lm3697: Make error handling more robust
leds: lm3697: Update header block to reflect reality
leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for:
- Aquacomputer D5 Next
- SB-RMI power module
Added chip support to existing drivers:
- Support for various Zen2 and Zen3 APUs and for Yellow Carp (SMU
v13) added to k10temp driver
- Support for Silicom n5010 PAC added to intel-m10-bmc driver
- Support for BPD-RS600 added to pmbus/bpa-rs600 driver
Other notable changes:
- In k10temp, do not display Tdie on Zen CPUs if there is no
difference between Tdie and Tctl
- Converted adt7470 and dell-smm drivers to use
devm_hwmon_device_register_with_info API
- Support for temperature/pwm tables added to axi-fan-control driver
- Enabled fan control for Dell Precision 7510 in dell-smm driver
Various other minor improvements and fixes in several drivers"
* tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
hwmon: add driver for Aquacomputer D5 Next
hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
hwmon: (adt7470) Convert to use regmap
hwmon: (adt7470) Fix some style issues
hwmon: (k10temp) Add support for yellow carp
hwmon: (k10temp) Rework the temperature offset calculation
hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs
hwmon: remove amd_energy driver in Makefile
hwmon: (dell-smm) Rework SMM function debugging
hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
hwmon: (dell-smm) Mark tables as __initconst
hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
hwmon: (axi-fan-control) Support temperature vs pwm points
hwmon: (axi-fan-control) Handle irqs in natural order
hwmon: (axi-fan-control) Make sure the clock is enabled
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
hwmon: (w83781d) Match on device tree compatibles
dt-bindings: hwmon: Add bindings for Winbond W83781D
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has a smaller pull reuest this time:
- new driver for I2C virtio
- removal of PMC SMP driver because platform is already gone
- IRQ probing and DMAENGINE API cleanups
- add SI metric prefix definitions to units.h
- beginning of i801 refactorization
- a few driver improvements"
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
i2c: cadence: Implement save restore
i2c: xlp9xx: fix main IRQ check
i2c: mt65xx: fix IRQ check
i2c: virtio: add a virtio i2c frontend driver
i2c: hix5hd2: fix IRQ check
i2c: s3c2410: fix IRQ check
i2c: iop3xx: fix deferred probing
i2c: synquacer: fix deferred probing
i2c: sun6i-pw2i: Prefer strscpy over strlcpy
i2c: remove dead PMC MSP TWI/SMBus/I2C driver
i2c: dev: Use sysfs_emit() in "show" functions
i2c: dev: Define pr_fmt() and drop duplication substrings
i2c: designware: Fix indentation in the header
i2c: designware: Use DIV_ROUND_CLOSEST() macro
units: Add SI metric prefix definitions
i2c: at91: mark PM ops as __maybe unused
i2c: sh_mobile: : use proper DMAENGINE API for termination
i2c: qup: : use proper DMAENGINE API for termination
i2c: mxs: : use proper DMAENGINE API for termination
i2c: imx: : use proper DMAENGINE API for termination
...
|
|
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Return a proper response in case of an ioctl error
- Issue HPI to interrupt BKOPS for eMMC if it timed out
- Avoid hogging the CPU while polling for busy
- Extend sd8787 pwrseq to support the wilc1000 SDIO
- Remove a couple of confusing warning messages
- Clarify comment for ->card_busy() host ops
MMC host:
- dw_mmc: Add data CRC error injection
- mmci: De-assert reset during ->probe()
- rtsx_pci: Fix long reads when clock is pre-scaled
- sdhci: Correct the tuning command handle for PIO mode
- sdhci-esdhc-imx: Improve support for auto tuning
- sdhci-msm: Add support for the sc7280
- sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
- sdhci-of-arasan: Enable support for auto cmd12
- sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
- usdhi6rol0: Implement the ->card_busy() host ops
MEMSTICK:
- A couple of minor cleanups"
* tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: queue: Remove unused parameters(request_queue)
mmc: pwrseq: sd8787: fix compilation warning
mmc: core: Return correct emmc response in case of ioctl error
mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning
mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning
mmc: core: Issue HPI in case the BKOPS timed out
mmc: queue: Match the data type of max_segments
mmc: switch from 'pci_' to 'dma_' API
memstick: switch from 'pci_' to 'dma_' API
memstick: r592: Change the name of the 'pci_driver' structure to be consistent
mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
mmc: pwrseq: sd8787: add support for wilc1000
dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000
dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule
dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
mmc: core: Update ->card_busy() callback comment
mmc: usdhi6rol0: Implement card_busy function
mmc: sdhci: Correct the tuning command handle for PIO mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These improve the handling of secondary firmware nodes in
fwnode_graph_get_next_endpoint() (Daniel Scally)"
* tag 'devprop-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "media: device property: Call fwnode_graph_get_endpoint_by_id() for fwnode->secondary"
device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20210730,
clean up the ACPI companion binding code, optimize the I2C handling in
the XPower PMIC driver, add 16550-compatible Serial Port Subtype
support to the SPCR parsing code, add a few LoongArch support bits,
add a ne quirk to the button driver, add new PCH FIVR methods to the
DPTF code, replace deprecated CPU-hotplug functions in the processor
driver, improve the acpi_os_map_memory() handling on non-x86 and do
some assorted cleanups.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20210730
including the following changes:
- Add support for the AEST table (data compiler) to iASL (Bob
Moore)
- Fix an if statement (add parens) (Bob Moore)
- Drop trailing semicolon from some macros (Bob Moore)
- Fix compilation of WPBT table with no command-line arguments in
iASL (Bob Moore)
- Add method name "_DIS" for use with aslmethod.c (Bob Moore)
- Add new DBG2 Serial Port Subtypes (Marcin Wojtas)
- Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)
- Add support for the new 16550-compatible Serial Port Subtype to the
SPCR table parsing code (Marcin Wojtas)
- Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
(Ulrich Huber)
- Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)
- Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)
- Replace deprecated CPU-hotplug functions in the ACPI processor
driver (Sebastian Andrzej Siewior)
- Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)
- Make platform-profile catch profile changes initiated by user space
and notify user processes of them (Hans de Goede)
- Clean up the ACPI companion binding and unbinding code and update
debug messaging in the ACPI power resources code (Rafael Wysocki)
- Clean up a couple of code pieces related to configfs (Andy
Shevchenko)
- Rearrange the FPDT table parsing code to avoid printing warning
messages for reserved record types (Adrian Huang)"
* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
ACPI: power: Drop name from struct acpi_power_resource
ACPI: power: Use acpi_handle_debug() to print debug messages
ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
ACPI: Add memory semantics to acpi_os_map_memory()
ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
ACPICA: Update version to 20210730
ACPICA: Add method name "_DIS" For use with aslmethod.c
ACPICA: iASL: Fix for WPBT table with no command-line arguments
ACPICA: Headers: Add new DBG2 Serial Port Subtypes
ACPICA: Macros should not use a trailing semicolon
ACPICA: Fix an if statement (add parens)
ACPICA: iASL: Add support for the AEST table (data compiler)
ACPI: processor: Replace deprecated CPU-hotplug functions
ACPI: DPTF: Add new PCH FIVR methods
ACPI: configfs: Make get_header() to return error pointer
ACPI: configfs: Use sysfs_emit() in "show" functions
driver core: Split device_platform_notify()
software nodes: Split software_node_notify()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These address some PCI device power management issues, add new
hardware support to the RAPL power capping driver, add HWP guaranteed
performance change notification support to the intel_pstate driver,
replace deprecated CPU-hotplug functions in a few places, update CPU
PM notifiers to use raw spinlocks, update the PM domains framework
(new DT property support, Kconfig fix), do a couple of cleanups in
code related to system sleep, and improve the energy model and the
schedutil cpufreq governor.
Specifics:
- Address 3 PCI device power management issues (Rafael Wysocki).
- Add Power Limit4 support for Alder Lake to the Intel RAPL power
capping driver (Sumeet Pawnikar).
- Add HWP guaranteed performance change notification support to the
intel_pstate driver (Srinivas Pandruvada).
- Replace deprecated CPU-hotplug functions in code related to power
management (Sebastian Andrzej Siewior).
- Update CPU PM notifiers to use raw spinlocks (Valentin Schneider).
- Add support for 'required-opps' DT property to the generic power
domains (genpd) framework and use this property for I2C on ARM64
sc7180 (Rajendra Nayak).
- Fix Kconfig issue related to genpd (Geert Uytterhoeven).
- Increase energy calculation precision in the Energy Model (Lukasz
Luba).
- Fix kobject deletion in the exit code of the schedutil cpufreq
governor (Kevin Hao).
- Unmark some functions as kernel-doc in the PM core to avoid
false-positive documentation build warnings (Randy Dunlap).
- Check RTC features instead of ops in suspend_test Alexandre
Belloni)"
* tag 'pm-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix domain attach for CONFIG_PM_OPP=n
powercap: Add Power Limit4 support for Alder Lake SoC
cpufreq: intel_pstate: Process HWP Guaranteed change notification
thermal: intel: Allow processing of HWP interrupt
notifier: Remove atomic_notifier_call_chain_robust()
PM: cpu: Make notifier chain use a raw_spinlock_t
PM: sleep: unmark 'state' functions as kernel-doc
arm64: dts: sc7180: Add required-opps for i2c
PM: domains: Add support for 'required-opps' to set default perf state
opp: Don't print an error if required-opps is missing
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
PM: EM: Increase energy calculation precision
PM: sleep: check RTC features instead of ops in suspend_test
PM: sleep: s2idle: Replace deprecated CPU-hotplug functions
cpufreq: Replace deprecated CPU-hotplug functions
powercap: intel_rapl: Replace deprecated CPU-hotplug functions
PCI: PM: Enable PME if it can be signaled from D3cold
PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
PCI: Use pci_update_current_state() in pci_enable_device_flags()
|
|
include/linux/netdevice.h
net/socket.c
d0efb16294d1 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls")
876f0bf9d0d5 ("net: socket: simplify dev_ifconf handling")
29c4964822aa ("net: socket: rework compat_ifreq_ioctl()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current settings may produce a build error when
CONFIG_OF_NET is disabled. The CONFIG_OF_NET controls
a headfile <linux/of.h> and some functions
in <linux/of_net.h>.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch removes some unnecessary spaces for cleanup.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some required spaces to improve readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
abs() returns signed long, which could not convert the type
as unsigned, and it may cause a mismatch type warning from
static tools. To fix it, this patch uses an variable to save
the abs()'s result and does a explicit conversion.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the driver sets default feature for netdev->features,
netdev->hw_features, netdev->vlan_features and
netdev->hw_enc_features separately. It's fussy, because most
of the feature bits are same. So refine it by copy value from
netdev->features.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With current config, for packets with IPv4 checksum errors,
errorcode is being set to UNKNOWN. Hence added a separate
errorcodes for outer and inner IPv4 checksum and changed
NPC configuration accordingly.
Also turn on L2 multicast address check in NPC protocol check block.
Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the static code analyzer reported issues
in rvu_npc.c. The reported errors are different sizes of
operands in bitops and returning uninitialized values.
Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In npc_update_vf_flow_entry function the loop cursor
'index' is being changed inside the loop causing
the loop to spin forever. This in turn hogs the kworker
thread forever and no other mbox message is processed
by AF driver after that. Fix this by using
another variable in the loop.
Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the given counter does not belong to the entry
then code ends up in infinite loop because the loop
cursor, entry is not getting updated further. This
patch fixes that by updating entry for every iteration.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The strlcpy should not be used because it doesn't limit the source
length. As linus says, it's a completely useless function if you
can't implicitly trust the source string - but that is almost always
why people think they should use it! All in all the BSD function
will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, We prefer using strscpy instead of strlcpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For better performance set hardware to use NDC TX for reading packet
data specified NIX_SEND_SG_S.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on tests the QCA7000 doesn't support checksum offloading. So assume
ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum
handling. This fixes data transfer issues in noisy environments.
Reported-by: Michael Heimpold <michael.heimpold@in-tech.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
An 'unlikely()' has been removed when calling 'dma_mapping_error()' because
this function, which is inlined, already has such an annotation.
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bc6cd281eae024b26fd9c7ef6678d2d1dc9d74fd.1630150008.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull libata updates from Jens Axboe:
"libata changes for the 5.15 release:
- NCQ priority improvements (Damien, Niklas)
- coccinelle warning fix (Jing)
- dwc_460ex phy fix (Andy)"
* tag 'for-5.15/libata-2021-08-30' of git://git.kernel.dk/linux-block:
include:libata: fix boolreturn.cocci warnings
docs: sysfs-block-device: document ncq_prio_supported
docs: sysfs-block-device: improve ncq_prio_enable documentation
libata: Introduce ncq_prio_supported sysfs sttribute
libata: print feature list on device scan
libata: fix ata_read_log_page() warning
libata: cleanup NCQ priority handling
libata: cleanup ata_dev_configure()
libata: cleanup device sleep capability detection
libata: simplify ata_scsi_rbuf_fill()
libata: fix ata_host_start()
ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
|
|
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
