summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-22Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay
2019-12-22Merge tag 'riscv/for-v5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-21Merge tag 'for-linus-5.5b-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two cleanup patches and a small series for supporting reloading the Xen block backend driver" * tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/grant-table: remove multiple BUG_ON on gnttab_interface xen-blkback: support dynamic unbind/bind xen/interface: re-define FRONT/BACK_RING_ATTACH() xenbus: limit when state is forced to closed xenbus: move xenbus_dev_shutdown() into frontend code... xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk
2019-12-21Merge tag 'powerpc-5.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two weeks worth of accumulated fixes: - A fix for a performance regression seen on PowerVM LPARs using dedicated CPUs, caused by our vcpu_is_preempted() returning true even for idle CPUs. - One of the ultravisor support patches broke KVM on big endian hosts in v5.4. - Our KUAP (Kernel User Access Prevention) code missed allowing access in __clear_user(), which could lead to an oops or erroneous SEGV when triggered via PTRACE_GETREGSET. - Two fixes for the ocxl driver, an open/remove race, and a memory leak in an error path. - A handful of other small fixes. Thanks to: Andrew Donnellan, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Hildenbrand, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Ihor Pasichnyk, Juri Lelli, Marcus Comstedt, Mike Rapoport, Parth Shah, Srikar Dronamraju, Vaidyanathan Srinivasan" * tag 'powerpc-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix regression on big endian hosts powerpc: Fix __clear_user() with KUAP enabled powerpc/pseries/cmm: fix managed page counts when migrating pages between zones powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk() ocxl: Fix potential memory leak on context creation powerpc/irq: fix stack overflow verification powerpc: Ensure that swiotlb buffer is allocated from low memory powerpc/shared: Use static key to detect shared processor powerpc/vcpu: Assume dedicated processors as non-preempt ocxl: Fix concurrent AFU open and device removal
2019-12-21Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One core framework fix to walk the orphan list and match up clks to parents when clk providers register the DT provider after registering all their clks (as they should). Then a handful of driver fixes for the qcom, imx, and at91 drivers. The driver fixes are relatively small fixes for incorrect register settings or missing locks causing race conditions" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: Avoid SMMU/cx gdsc corner cases clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs clk: Move clk_core_reparent_orphans() under CONFIG_OF clk: at91: fix possible deadlock clk: walk orphan list on clock provider registration clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux
2019-12-20sfc: Include XDP packet headroom in buffer step size.Charles McLachlan
Correct a mismatch between rx_page_buf_step and the actual step size used when filling buffer pages. This patch fixes the page overrun that occured when the MTU was set to anything bigger than 1692. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sfc: fix channel allocation with brute forceEdward Cree
It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20hv_netvsc: Fix unwanted rx_table resetHaiyang Zhang
In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: phy: ensure that phy IDs are correctly typedRussell King
PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20qede: Disable hardware gro when xdp prog is installedManish Chopra
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix issues in setting interrupt moderation params in ethtoolArthur Kiyanovski
Issue 1: -------- Reproduction steps: 1. sudo ethtool -C eth0 rx-usecs 128 2. sudo ethtool -C eth0 adaptive-rx on 3. sudo ethtool -C eth0 adaptive-rx off 4. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 3, ethtool userspace calls first the ena_get_coalesce() handler to get the current value of all properties, and then the ena_set_coalesce() handler. When ena_get_coalesce() is called the adaptive interrupt moderation is still on. There is an if in the code that returns the rx_coalesce_usecs only if the adaptive interrupt moderation is off. And since it is still on, rx_coalesce_usecs is not set, meaning it stays 0. Solution to issue: Remove this if static interrupt moderation intervals have nothing to do with dynamic ones. Issue 2: -------- Reproduction steps: 1. sudo ethtool -C eth0 adaptive-rx on 2. sudo ethtool -C eth0 rx-usecs 128 3. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 2, when ena_set_coalesce() is called, the handler tests if rx adaptive interrupt moderation is on, and if it is, it returns before getting to the part in the function that sets the rx non-adaptive interrupt moderation interval. Solution to issue: Remove the return from the function when rx adaptive interrupt moderation is on. Also cleaned up the fixed code in ena_set_coalesce by grouping together adaptive interrupt moderation toggling, and using && instead of nested ifs. Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()") Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals") Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix default tx interrupt moderation intervalArthur Kiyanovski
Current default non-adaptive tx interrupt moderation interval is 196 us. This value is too high and might cause the tx queue to fill up. In this commit we set the default non-adaptive tx interrupt moderation interval to 64 us in order to: 1. Reduce the probability of the queue filling-up (when compared to the current default value of 196 us). 2. Reduce unnecessary tx interrupt overhead (which happens if we set the default tx interval to 0). We determined experimentally that 64 us is an optimal value that reduces interrupt rate by more than 20% without affecting performance. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: stmmac: platform: Fix MDIO init for platforms without PHYPadmanabhan Rajanbabu
The current implementation of "stmmac_dt_phy" function initializes the MDIO platform bus data, even in the absence of PHY. This fix will skip MDIO initialization if there is no PHY present. Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic") Acked-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: hisilicon: Fix a BUG trigered by wrong bytes_complJiangfeng Xiao
When doing stress test, we get the following trace: kernel BUG at lib/dynamic_queue_limits.c:26! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: hip04_eth CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1 Hardware name: Hisilicon A15 task: c3637668 task.stack: de3bc000 PC is at dql_completed+0x18/0x154 LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth] pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313 sp : de3bdc2c ip : 00000000 fp : c020fb10 r10: 00000000 r9 : c39b4224 r8 : 00000001 r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392 r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 1e189b80 DAC: 55555555 Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190) Stack: (0xde3bdc2c to 0xde3be000) [<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth]) [<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth]) [<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374) [<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318) [<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) [<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) [<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148) [<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58) Exception stack(0xde3bdde0 to 0xde3bde28) dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380 de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c de20: 600f0213 ffffffff [<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54) Kernel panic - not syncing: Fatal exception in interrupt Pre-modification code: int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { [...] [1] priv->tx_head = TX_NEXT(tx_head); [2] count++; [3] netdev_sent_queue(ndev, skb->len); [...] } An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2, tx_head has been updated, but corresponding 'skb->len' has not been added to dql_queue. And then hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim In hip04_tx_reclaim, because tx_head has been updated, bytes_compl will plus an additional "skb-> len" which has not been added to dql_queue. And then trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). To solve the problem described above, we put "netdev_sent_queue(ndev, skb->len);" before "priv->tx_head = TX_NEXT(tx_head);" Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver") Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: don't return -ENOTSUPP to userspaceJulian Wiedmann
ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: fix promiscuous mode after resetJulian Wiedmann
When managing the promiscuous mode during an RX modeset, qeth caches the current HW state to avoid repeated programming of the same state on each modeset. But while tearing down a device, we forget to clear the cached state. So when the device is later set online again, the initial RX modeset doesn't program the promiscuous mode since we believe it is already enabled. Fix this by clearing the cached state in the tear-down path. Note that for the SBP variant of promiscuous mode, this accidentally works right now because we unconditionally restore the SBP role while re-initializing. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: handle error due to unsupported transport modeJulian Wiedmann
Along with z/VM NICs, there's additional device types that only support a specific transport mode (eg. external-bridged IQD). Identify the corresponding error code, and raise a fitting error message so that the user knows to adjust their device configuration. On top of that also fix the subsequent error path, so that the rejected cmd doesn't need to wait for a timeout but gets cancelled straight away. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20cxgb4: fix refcount init for TC-MQPRIO offloadRahul Lakkireddy
Properly initialize refcount to 1 when hardware queue arrays for TC-MQPRIO offload have been freshly allocated. Otherwise, following warning is observed. Also fix up error path to only free hardware queue arrays when refcount reaches 0. [ 130.075342] ------------[ cut here ]------------ [ 130.075343] refcount_t: addition on 0; use-after-free. [ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25 refcount_warn_saturate+0xe1/0x100 [ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb ib_uverbs x86_pkg_temp_thermal cxgb4 igb [ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted 5.5.0-rc1+ #11 [ 130.075362] Hardware name: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2 01/16/2015 [ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100 [ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85 63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1 ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40 [ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286 [ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffff8a2e9fa187d0 [ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09: 000000000000003c [ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12: ffffa48d00c0b848 [ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15: 0000000000000031 [ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000) knlGS:0000000000000000 [ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4: 00000000001606f0 [ 130.075370] Call Trace: [ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4] [ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4] [ 130.075384] ? pfifo_fast_init+0x7e/0xf0 [ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio] [ 130.075389] qdisc_create+0x1bf/0x4a0 [ 130.075390] tc_modify_qdisc+0x1ff/0x770 [ 130.075392] rtnetlink_rcv_msg+0x28b/0x350 [ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110 [ 130.075395] netlink_rcv_skb+0xc6/0x100 [ 130.075396] netlink_unicast+0x1db/0x330 [ 130.075397] netlink_sendmsg+0x2f5/0x460 [ 130.075399] ? _copy_from_user+0x2e/0x60 [ 130.075400] sock_sendmsg+0x59/0x70 [ 130.075401] ____sys_sendmsg+0x1f0/0x230 [ 130.075402] ? copy_msghdr_from_user+0xd7/0x140 [ 130.075403] ___sys_sendmsg+0x77/0xb0 [ 130.075404] ? ___sys_recvmsg+0x84/0xb0 [ 130.075406] ? __handle_mm_fault+0x377/0xaf0 [ 130.075407] __sys_sendmsg+0x53/0xa0 [ 130.075409] do_syscall_64+0x44/0x130 [ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 130.075413] RIP: 0033:0x7f688f13af10 [ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 [ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX: 00007f688f13af10 [ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI: 0000000000000003 [ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09: 0000000000008000 [ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12: 0000000000000000 [ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15: 000000000067c600 [ 130.075418] ---[ end trace 8fbb3bf36a8671db ]--- v2: - Move the refcount_set() closer to where the hardware queue arrays are being allocated. - Fix up error path to only free hardware queue arrays when refcount reaches 0. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Leftover put_cpu() in the perf/smmuv3 error path. - Add Hisilicon TSV110 to spectre-v2 safe list * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list perf/smmuv3: Remove the leftover put_cpu() in error path
2019-12-20Merge tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Probably the last one before Christmas, I'll see if there is much demand over next few weeks for more fixes, I expect it'll be quiet enough. This has one exynos fix, and a bunch of i915 core and i915 GVT fixes. Summary: exynos: - component delete fix i915: - Fix to drop an unused and harmful display W/A - Fix to define EHL power wells independent of ICL - Fix for priority inversion on bonded requests - Fix in mmio offset calculation of DSB instance - Fix memory leak from get_task_pid when banning clients - Fixes to avoid dereference of uninitialized ops in dma_fence tracing and keep reference to execbuf object until submitted. - vGPU state setting locking fix (Zhenyu) - Fix vGPU display dmabuf as read-only (Zhenyu) - Properly handle vGPU display dmabuf page pin when rendering (Tina) - Fix one guest boot warning to handle guc reset state (Fred)" * tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drm: drm/exynos: gsc: add missed component_del drm/i915: Fix pid leak with banned clients drm/i915/gem: Keep request alive while attaching fences drm/i915: Fix WARN_ON condition for cursor plane ddb allocation drm/i915/gvt: Fix guest boot warning drm/i915/tgl: Drop Wa#1178 drm/i915/ehl: Define EHL powerwells independently of ICL drm/i915: Set fence_work.ops before dma_fence_init drm/i915: Copy across scheduler behaviour flags across submit fences drm/i915/dsb: Fix in mmio offset calculation of DSB instance drm/i915/gvt: Pin vgpu dma address before using drm/i915/gvt: set guest display buffer as readonly drm/i915/gvt: use vgpu lock for active state setting
2019-12-21Merge tag 'drm-intel-fixes-2019-12-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix to drop an unused and harmful display W/A - Fix to define EHL power wells independent of ICL - Fix for priority inversion on bonded requests - Fix in mmio offset calculation of DSB instance - Fix memory leak from get_task_pid when banning clients - Fixes to avoid dereference of uninitialized ops in dma_fence tracing and keep reference to execbuf object until submitted. - Includes gvt-fixes-2019-12-18 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191219124635.GA16068@jlahtine-desk.ger.corp.intel.com
2019-12-20s390/dasd: fix typo in copyright statementStefan Haberland
coypright -> copyright Reported-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20s390/dasd: fix memleak in path handling error caseStefan Haberland
If for whatever reason the dasd_eckd_check_characteristics() function exits after at least some paths have their configuration data allocated those data is never freed again. In the error case the device->private pointer is set to NULL and dasd_eckd_uncheck_device() will exit without freeing the path data because of this NULL pointer. Fix by calling dasd_eckd_clear_conf_data() for error cases. Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device() to avoid code duplication. Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20s390/dasd/cio: Interpret ccw_device_get_mdc return value correctlyJan Höppner
The max data count (mdc) is an unsigned 16-bit integer value as per AR documentation and is received via ccw_device_get_mdc() for a specific path mask from the CIO layer. The function itself also always returns a positive mdc value or 0 in case mdc isn't supported or couldn't be determined. Though, the comment for this function describes a negative return value to indicate failures. As a result, the DASD device driver interprets the return value of ccw_device_get_mdc() incorrectly. The error case is essentially a dead code path. To fix this behaviour, check explicitly for a return value of 0 and change the comment for ccw_device_get_mdc() accordingly. This fix merely enables the error code path in the DASD functions get_fcx_max_data() and verify_fcx_max_data(). The actual functionality stays the same and is still correct. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20Merge tag 'iommu-fixes-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Fix kmemleak warning in IOVA code - Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask type mismatches - Make ISA reserved regions relaxable, so that VFIO can assign devices which have such regions defined - Fix mapping errors resulting in IO page-faults in the VT-d driver - Make sure direct mappings for a domain are created after the default domain is updated - Map ISA reserved regions in the VT-d driver with correct permissions - Remove unneeded check for PSI capability in the IOTLB flush code of the VT-d driver - Lockdep fix iommu_dma_prepare_msi() * tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Relax locking in iommu_dma_prepare_msi() iommu/vt-d: Remove incorrect PSI capability check iommu/vt-d: Allocate reserved region for ISA with correct permission iommu: set group default domain before creating direct mappings iommu/vt-d: Fix dmar pte read access not set error iommu/vt-d: Set ISA bridge reserved region as relaxable iommu/dma: Rationalise types for DMA masks iommu/iova: Init the struct iova to fix the possible memleak
2019-12-20Merge tag 'platform-drivers-x86-v5.5-2' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "Bucket of fixes for PDx86. Note, that there is no ABI breakage in Mellanox driver because it has been introduced in v5.5-rc1, so we can change it. Summary: - Add support of APUv4 and fix an assignment of simswap GPIO - Add Siemens CONNECT X300 to DMI table to avoid stuck during boot - Correct arguments of WMI call on HP Envy x360 15-cp0xxx model - Fix the mlx-bootctl sysfs attributes to be device related" * tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: pcengines-apuv2: Spelling fixes in the driver platform/x86: pcengines-apuv2: detect apuv4 board platform/x86: pcengines-apuv2: fix simswap GPIO assignment platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes platform/mellanox: fix the mlx-bootctl sysfs
2019-12-20Merge tag 'mmc-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix tuning for MT8173 HS200/HS400 mode - sdhci: Revert a fix for incorrect switch to HS mode - sdhci-msm: Fixup accesses to the DDR_CONFIG register - sdhci-of-esdhc: Revert a bad fix for erratum A-009204 - sdhci-of-esdhc: Re-implement fix for erratum A-009204 - sdhci-of-esdhc: Fixup P2020 errata handling - sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems * tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround mmc: sdhci: Add a quirk for broken command queuing mmc: sdhci: Workaround broken command queuing on Intel GLK mmc: sdhci-of-esdhc: fix P2020 errata handling mmc: sdhci: Update the tuning failed messages to pr_debug level mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register Revert "mmc: sdhci: Fix incorrect switch to HS mode"
2019-12-20Merge tag 'char-misc-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and other driver fixes for 5.5-rc3. The most noticable one is a much-reported fix for a random driver issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are a chunk of habanalab driver fixes and intel_th driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: random: don't forget compat_ioctl on urandom intel_th: msu: Fix window switching without windows intel_th: Fix freeing IRQs intel_th: pci: Add Elkhart Lake SOC support intel_th: pci: Add Comet Lake PCH-V support habanalabs: remove variable 'val' set but not used habanalabs: rate limit error msg on waiting for CS
2019-12-20Merge tag 'staging-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for a number of reported issues. The majority here are some fixes for the wfx driver, but also in here is a comedi driver fix found during some code review, and an axis-fifo build dependancy issue to resolve some reported testing problems. All of these have been in linux-next with no reported issues" * tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wfx: fix wrong error message staging: wfx: fix hif_set_mfp() with big endian hosts staging: wfx: detect race condition in WEP authentication staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps staging: wfx: fix rate control handling staging: wfx: firmware does not support more than 32 total retries staging: wfx: use boolean appropriately staging: wfx: fix counter overflow staging: wfx: fix case of lack of tx_retry_policies staging: wfx: fix the cache of rate policies on interface reset staging: axis-fifo: add unspecified HAS_IOMEM dependency staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value
2019-12-20Merge tag 'tty-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.5-rc3. Only four small patches here: - atmel serial driver fix - msm_serial driver fix - sprd serial driver fix - tty core port fix The last tty core fix should resolve a long-standing bug with a race at port creation time that some people would see, and Sudip finally tracked down. All of these have been in linux-next with no reported issues" * tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty/serial: atmel: fix out of range clock divider handling tty: link tty and port before configuring it as console serial: sprd: Add clearing break interrupt operation tty: serial: msm_serial: Fix lockup for sysrq and oops
2019-12-20Merge tag 'usb-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported issues. Included in here are: - xhci build warning fix - ehci disconnect warning fix - usbip lockup fix and error cleanup fix - typec build fix All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: Fix build warning seen with CONFIG_PM=n usbip: Fix error path of vhci_recv_ret_submit() usbip: Fix receive error in vhci-hcd when using scatter-gather USB: EHCI: Do not return -EPIPE when hub is disconnected usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'
2019-12-20Merge tag 'pinctrl-v5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Sorry that this fixes pull request took a while. Too much christmas business going on. This contains a few really important Intel fixes and some odd fixes: - A host of fixes for the Intel baytrail and cherryview: properly serialize all register accesses and add the irqchip with the gpiochip as we need to, fix some pin lists and initialize the hardware in the right order. - Fix the Aspeed G6 LPC configuration. - Handle a possible NULL pointer exception in the core. - Fix the Kconfig dependencies for the Equilibrium driver" * tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config pinctrl: Modify Kconfig to fix linker error pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration pinctrl: cherryview: Pass irqchip when adding gpiochip pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback pinctrl: cherryview: Split out irq hw-init into a separate helper function pinctrl: baytrail: Pass irqchip when adding gpiochip pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Update North Community pin list pinctrl: baytrail: Really serialize all register accesses
2019-12-20platform/x86: pcengines-apuv2: Spelling fixes in the driverAndy Shevchenko
Mainly does: - capitalize gpio and bios to GPIO and BIOS - capitalize beginning of comments - add periods in multi-line comments Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: pcengines-apuv2: detect apuv4 boardEnrico Weigelt, metux IT consult
GPIO stuff on APUv4 seems to be the same as on APUv2, so we just need to match on DMI data. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: pcengines-apuv2: fix simswap GPIO assignmentEnrico Weigelt, metux IT consult
The mapping entry has to hold the GPIO line index instead of controller's register number. Fixes: 5037d4ddda31 ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led") Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI tableMichael Haener
The CONNECT X300 uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Tested on CONNECT X300. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Michael Haener <michael.haener@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytesHans de Goede
At least on the HP Envy x360 15-cp0xxx model the WMI interface for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes, otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS): Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5 We do not care about the contents of the buffer, we just want to know if the HPWMI_FEATURE2_QUERY command is supported. This commits bumps the buffer size, fixing the error. Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable") Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20platform/mellanox: fix the mlx-bootctl sysfsLiming Sun
This is a follow-up commit for the sysfs attributes to change from DRIVER_ATTR to DEVICE_ATTR according to some initial comments. In such case, it's better to point the sysfs path to the device itself instead of the driver. The ABI document is also updated. Fixes: 79e29cb8fbc5 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-20xen/grant-table: remove multiple BUG_ON on gnttab_interfaceAditya Pakki
gnttab_request_version() always sets the gnttab_interface variable and the assertions to check for empty gnttab_interface is unnecessary. The patch eliminates multiple such assertions. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xen-blkback: support dynamic unbind/bindPaul Durrant
By simply re-attaching to shared rings during connect_ring() rather than assuming they are freshly allocated (i.e assuming the counters are zero) it is possible for vbd instances to be unbound and re-bound from and to (respectively) a running guest. This has been tested by running: while true; do fio --name=randwrite --ioengine=libaio --iodepth=16 \ --rw=randwrite --bs=4k --direct=1 --size=1G --verify=crc32; done in a PV guest whilst running: while true; do echo vbd-$DOMID-$VBD >unbind; echo unbound; sleep 5; echo vbd-$DOMID-$VBD >bind; echo bound; sleep 3; done in dom0 from /sys/bus/xen-backend/drivers/vbd to continuously unbind and re-bind its system disk image. This is a highly useful feature for a backend module as it allows it to be unloaded and re-loaded (i.e. updated) without requiring domUs to be halted. This was also tested by running: while true; do echo vbd-$DOMID-$VBD >unbind; echo unbound; sleep 5; rmmod xen-blkback; echo unloaded; sleep 1; modprobe xen-blkback; echo bound; cd $(pwd); sleep 3; done in dom0 whilst running the same loop as above in the (single) PV guest. Some (less stressful) testing has also been done using a Windows HVM guest with the latest 9.0 PV drivers installed. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xenbus: limit when state is forced to closedPaul Durrant
If a driver probe() fails then leave the xenstore state alone. There is no reason to modify it as the failure may be due to transient resource allocation issues and hence a subsequent probe() may succeed. If the driver supports re-binding then only force state to closed during remove() only in the case when the toolstack may need to clean up. This can be detected by checking whether the state in xenstore has been set to closing prior to device removal. NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver, which defaults to false. Subsequent patches will add support to some backend drivers. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xenbus: move xenbus_dev_shutdown() into frontend code...Paul Durrant
...and make it static xenbus_dev_shutdown() is seemingly intended to cause clean shutdown of PV frontends when a guest is rebooted. Indeed the function waits for a conpletion which is only set by a call to xenbus_frontend_closed(). This patch removes the shutdown() method from backends and moves xenbus_dev_shutdown() from xenbus_probe.c into xenbus_probe_frontend.c, renaming it appropriately and making it static. NOTE: In the case where the backend is running in a driver domain, the toolstack should have already terminated any frontends that may be using it (since Xen does not support re-startable PV driver domains) so xenbus_dev_shutdown() should never be called. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xen/blkfront: Adjust indentation in xlvbd_alloc_gendiskNathan Chancellor
Clang warns: ../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] nr_parts = PARTS_PER_DISK; ^ ../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here if (err) ^ This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns. While we are here, the previous line has some trailing whitespace; clean that up as well. Fixes: c80a420995e7 ("xen-blkfront: handle Xen major numbers other than XENVBD") Link: https://github.com/ClangBuiltLinux/linux/issues/791 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20riscv: move sifive_l2_cache.c to drivers/socChristoph Hellwig
The sifive_l2_cache.c is in no way related to RISC-V architecture memory management. It is a little stub driver working around the fact that the EDAC maintainers prefer their drivers to be structured in a certain way that doesn't fit the SiFive SOCs. Move the file to drivers/soc and add a Kconfig option for it, as well as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE. Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Borislav Petkov <bp@suse.de> [paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-19nfc: s3fwrn5: replace the assertion with a WARN_ONAditya Pakki
In s3fwrn5_fw_recv_frame, if fw_info->rsp is not empty, the current code causes a crash via BUG_ON. However, s3fwrn5_fw_send_msg does not crash in such a scenario. The patch replaces the BUG_ON by returning the error to the callers and frees up skb. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: macb: fix probing of PHY not described in the dtAntoine Tenart
This patch fixes the case where the PHY isn't described in the device tree. This is due to the way the MDIO bus is registered in the driver: whether the PHY is described in the device tree or not, the bus is registered through of_mdiobus_register. The function masks all the PHYs and only allow probing the ones described in the device tree. Prior to the Phylink conversion this was also done but later on in the driver the MDIO bus was manually scanned to circumvent the fact that the PHY wasn't described. This patch fixes it in a proper way, by registering the MDIO bus based on if the PHY attached to a given interface is described in the device tree or not. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19of: mdio: export of_mdiobus_child_is_phyAntoine Tenart
This patch exports of_mdiobus_child_is_phy, allowing to check if a child node is a network PHY. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 269 insertions(+), 108 deletions(-). The main changes are: 1) Fix lack of synchronization between xsk wakeup and destroying resources used by xsk wakeup, from Maxim Mikityanskiy. 2) Fix pruning with tail call patching, untrack programs in case of verifier error and fix a cgroup local storage tracking bug, from Daniel Borkmann. 3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer. 4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when only cBPF is present, from Alexander Lobakin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
generated by cgit (git 2.34.1) at 2024-05-28 00:52:10 +0000