summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-02-18bnx2x: Remove set but not used variable 'mfw_vn'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c: In function 'bnx2x_get_hwinfo': drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:11940:10: warning: variable 'mfw_vn' set but not used [-Wunused-but-set-variable] It's never used since introduction. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: phy: use mii_10gbt_stat_mod_linkmode_lpa_t in genphy_c45_read_lpaHeiner Kallweit
Use mii_10gbt_stat_mod_linkmode_lpa_t() in genphy_c45_read_lpa() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18liquidio: using NULL instead of plain integerYueHaibing
Fix following warning: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1453:35: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/lio_main.c:2910:23: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18r8169: remove unneeded mmiowb barriersHeiner Kallweit
writex() has implicit barriers, that's what makes it different from writex_relaxed(). Therefore these calls to mmiowb() can be removed. This patch was recently reverted due to a dependency with another problematic patch. But because it didn't contribute to the problem it was rebased and can be resubmitted. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18mdio_bus: Fix PTR_ERR() usage after initialization to constantYueHaibing
Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 ./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 fix this by using IS_ERR before PTR_ERR Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18mlxsw: spectrum: Change IP2ME CPU policer rate and burst size valuesShalom Toledo
The IP2ME packet trap is triggered by packets hitting local routes. After evaluating current defaults used by the driver it was decided to reduce the amount of traffic generated by this trap to 1Kpps and increase the burst size. This is inline with similarly deployed systems. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: hamradio: remove unused hweight*() definesMasahiro Yamada
This file does not use hweight*() at all, and the definition is surrounded by #if 0 ... #endif. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: hns3: make function hclge_set_all_vf_rst() staticWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2431:5: warning: symbol 'hclge_set_all_vf_rst' was not declared. Should it be static? Fixes: aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sgi: use GFP_ATOMIC under spin lockWei Yongjun
The function meth_init_tx_ring() is called from meth_tx_timeout(), in which spin_lock is held, so we should use GFP_ATOMIC instead. Fixes: 8d4c28fbc284 ("meth: pass struct device to DMA API functions") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: Don't explicitly set Pause and Asym_PauseMaxime Chevallier
The PHY core expects PHY drivers not to set Pause and Asym_Pause bits, unless the driver only wants to specify one of them due to HW limitation. In the case of the Marvell10g driver, we don't need to set them. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: dsa: bcm_sf2: Remove set but not used variables 'v6_spec, v6_m_spec'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/bcm_sf2_cfp.c: In function 'bcm_sf2_cfp_ipv6_rule_set': drivers/net/dsa/bcm_sf2_cfp.c:606:40: warning: variable 'v6_m_spec' set but not used [-Wunused-but-set-variable] drivers/net/dsa/bcm_sf2_cfp.c:606:30: warning: variable 'v6_spec' set but not used [-Wunused-but-set-variable] It not used any more after commit e4f7ef54cbd8 ("dsa: bcm_sf2: use flow_rule infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17nfp: flower: fix masks for tcp and ip flags fieldsPieter Jansen van Vuuren
Check mask fields of tcp and ip flags when setting the corresponding mask flag used in hardware. Fixes: 8f2566225ae2 ("flow_offload: add flow_rule and flow_match") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17nfp: devlink: allow flashing the device via devlinkJakub Kicinski
Devlink now allows updating device flash. Implement this callback. Compared to ethtool update we no longer have to release the networking locks - devlink doesn't take them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: use phy_resolve_aneg_linkmode in genphy_read_statusHeiner Kallweit
Now that we have phy_resolve_aneg_linkmode() we can make genphy_read_status() much simpler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: improve phy_resolve_aneg_linkmodeHeiner Kallweit
We have the settings array of modes which is sorted based on aneg priority. Instead of checking each mode manually let's simply iterate over the sorted settings. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17mlxsw: core: Extend thermal module with per QSFP module thermal zonesVadim Pasternak
Add a dedicated thermal zone for each QSFP/SFP module. The current temperature is obtained from the module's temperature sensor and the trip points are set based on the warning and critical thresholds read from the module. A cooling device (fan) is bound to all the thermal zones. The thermal zone governor is set to user space in order to avoid collisions between thermal zones. For example, one thermal zone might want to increase the speed of the fan, whereas another one would like to decrease it. Deferring this decision to user space allows the user to the take the most suitable decision. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: check for newly set anegHeiner Kallweit
Even if the advertisement registers content didn't change, we may have just switched to aneg, and therefore have to trigger an aneg restart. This matches the behavior of genphy_config_aneg(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: use genphy_c45_an_config_anegAndrew Lunn
Use new function genphy_c45_config_aneg() in mv3310_config_aneg(). v2: - add a comment regarding 1000BaseT vendor registers v3: - rebased Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: patch splitted] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: add genphy_c45_an_config_anegAndrew Lunn
C45 configuration of 10/100 and multi-giga bit auto negotiation advertisement is standardized. Configuration of 1000Base-T however appears to be vendor specific. Move the generic code out of the Marvell driver into the common phy-c45.c file. v2: - change function name to genphy_c45_an_config_aneg Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: use new helper linkmode_adv_to_mii_10gbt_adv_t and split patch] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong. 2) test all bpf progs in alu32 mode, from Jiong. 3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin. 4) support for IP encap in lwt bpf progs, from Peter. 5) remove XDP_QUERY_XSK_UMEM dead code, from Jan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16net: stmmac: use correct define to get rx timestamp on GMAC4Alexandre Torgue
In dwmac4_wrback_get_rx_timestamp_status we looking for a RX timestamp. For that receive descriptors are handled and so we should use defines related to receive descriptors. It'll no change the functional behavior as RDES3_RDES1_VALID=TDES3_RS1V=BIT(26) but it makes code easier to read. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16Merge tag 'mlx5-updates-2019-02-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Support Mellanox BlueField SmartNIC (mlx5-updates-2019-02-15) Bodong Wang says, BlueField device is a multi-core ARM processor in a highly integrated system on chip coupled with the ConnectX interconnect controller. BlueField device can be presented in one out of two modes: - SEPARATED_HOST: ARM processors as a separated and orthogonal host like any other external host in the multi-host virtualization model. - EMBEDDED_CPU: ARM processors as Embedded CPU (EC) and part of the external hosts virtualization model. While existing driver already supports the device on separated_host mode, this patch series focus on the functionalities of embedded_cpu mode. On embedded_cpu mode, BlueField device exposes regular network controller PCI function in the BlueField host(e.g, x86). However, a separate PCI function called Embedded CPU Physical Function(ECPF) is also added to the ARM host side, where standard Linux distributions is able to run on the ARM cores. Depends on the NV configuration from firmware, ECPF can be the e-switch manager and firmware pages supplier. If ECPF is configured as e-switch manager and page supplier, it will take over the responsibilities from the PF on BlueField host includes: - Owns, controls and manages all e-switch parts, and takes e-switch traffic by default. It also should perform ENABLE_HCA for the host PF just like a PF does for its VFs. - Provides and manages the ICM host memory required for the HCA to store various contexts for itself, the PF and VFs belong the e-switch it manages. The PF on BlueField host side is still responsible for: - Control its own permanent MAC. - PCI and SRIOV configurations and perform ENABLE_HCA for its VFs. The ECPF can also retrieve information about the external host it controls, like host identifier, PCI BDF and number of virtual functions. As these parameters may be changed dynamically, an event will be triggered to the driver on ECPF side. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: split out OSN netdev opsJulian Wiedmann
Rather than special-casing OSN in a number of places, just give this device type its own netdev_ops structure. When setting up the OSN net_device, also skip the handling of the various HW offloads (eg TSO). The device shouldn't be advertising any of them, and the OSN code paths in qeth don't have support for them. In particular RX VLAN filtering is not supported, so don't hook up those callbacks in the netdev_ops. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: add support for ETHTOOL_GRINGPARAMJulian Wiedmann
Implement a trivial callback that exposes the queue sizes. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: overhaul ethtool statisticsJulian Wiedmann
Accumulate per-TX queue statistics, and increase their size to 64 bit. Don't bother with enabling/disabling the statistics, the overhead is negligible. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: move ethtool code into its own fileJulian Wiedmann
Most of this is self-contained code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: reduce ethtool statisticsJulian Wiedmann
Counting the number of function calls and the time spent in functions is best left to proper tracing facilities. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: use a static Output Queue arrayJulian Wiedmann
qeth dynamically allocates an array for storing pointers to its Output Queue structures. Switch this to a static array - we are currently limited to 4 Output Queues, so shrinking the qeth_qdio_info struct by just a few bytes doesn't justify the additional complexity. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: allow manual recovery when device is SOFTSETUPJulian Wiedmann
Once a qeth ccwgroup device is set online, it's also armed for internal recovery. So allow for testing that code path via sysfs, regardless of whether the interface is up or down. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15mlxsw: core: fix spelling mistake "temprature" -> "temperature"Colin Ian King
There is a spelling mistake in several dev_err messages, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15net/mlx5: E-Switch, Allow transition to offloads mode for ECPFBodong Wang
Currently, the e-switch driver requires going to legacy mode before changing to the offloads mode. This makes sense for regular case as the legacy mode is done by creating VFs. However, it's problematic when ECPF is the eswitch manager. In such case, ECPF will control the vports on peer host including the peer PF and VFs. But ECPF doesn't need and shall not create VFs as the VFs are created in the peer PF host. Grant ECPF the ability to change from none to the offloads mode. Note that currently the only way to go back to none mode is by unloading the ECPF driver. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Load/unload VF reps according to event from host PFBodong Wang
When host PF changes the number of VFs, the ECPF esw driver will get a FW event. It should query the number of VFs enabled by host PF and update the VF reps accordingly. Note that host PF can't change the number of VFs dynamically, it has to reset the number of VFs to 0 before changing to a new positive number. The host event is registered when driver is moving to switchdev mode, and it's the last step to do in esw_offloads_init. It's unregistered and the work queue is flushed when driver quits from switchdev mode. In this way, the host event and devlink command are serialized. When driver is enabling switchdev mode, pay attention to the following two facts: 1. Host PF must not have VF initialized as the flow table in ECPF has ENCAP enabled as default. Such flow table can't be created with existing initialized VFs. 2. ECPF doesn't know how many VFs the host PF will enable, ECPF offloads flow steering shall create the flow table/groups based on the max number of VFs possibly supported by host PF. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Consider ECPF vport depends on eswitch ownershipBodong Wang
ECPF connects to the eswitch through vport 0xfffe. ECPF may or may not be the eswitch manager depending on firmware configuration. 1. If ECPF is eswitch manager: ECPF will take over the eswitch manager responsibility. A rep of the host PF shall be created at the ECPF side for the eswitch manager to control. 2. If ECPF is not eswitch manager: host PF will be the eswitch manager, ECPF acts similar as a VF to the host PF. Host PF will be aware of the ECPF vport presence and control it's rep. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Assign a different position for uplink rep and vportBodong Wang
In offloads mode, the current implementation puts the uplink representor at index zero of the vport reps array. It is not "natural" to place it at index 0 since we want to put the representor for vport 0 at index 0 with the introduction of SmartNIC. A separate patch will handle the case whether a rep is needed for vport 0 (PF vport). So, we want to have a different placeholder for uplink vport and representor. It was placed at the end of vport and rep array. Since vport number can no longer act as an index into the vport or representors arrays, use functions to map vport numbers to indices when accessing the vports or representors arrays, and vice versa. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Centralize repersentor reg/unreg to eswitch driverBodong Wang
Eswitch has two users: IB and ETH. They both register repersentors when mlx5 interface is added, and unregister the repersentors when mlx5 interface is removed. Ideally, each driver should only deal with the entities which are unique to itself. However, current IB and ETH drivers have to perform the following eswitch operations: 1. When registering, specify how many vports to register. This number is the same for both drivers which is the total available vport numbers. 2. When unregistering, specify the number of registered vports to do unregister. Also, unload the repersentors which are already loaded. It's unnecessary for eswitch driver to hands out the control of above operations to individual driver users, as they're not unique to each driver. Instead, such operations should be centralized to eswitch driver. This consolidates eswitch control flow, and simplified IB and ETH driver. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Support load/unload reps of specific vport typesBodong Wang
Currently the driver loads and unloads all reps in an unbreakable group. However, with ECPF, the reps of special vports such as uplink and host PF should always be loaded in switchdev mode where the reps for VFs will be loaded on-demand and unloaded on no-demand. This is a pre-step for that change. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Add state to eswitch vport representorsBodong Wang
Currently the eswitch vport reps have a valid indicator, which is set on register and unset on unregister. However, a rep can be loaded or not loaded when doing unregister, current driver checks if the vport of that rep is enabled as a flag to imply the rep is loaded. However, for ECPF, this is not valid as the host PF will enable the vports for its VFs instead. Add three states: {unregistered, registered, loaded}, with the following state changes across different operations: create: (none) -> unregistered reg: unregistered -> registered load: registered -> loaded unload: loaded -> registered unreg: registered -> unregistered Note that the state shall only be updated inside eswitch driver rather than individual drivers such as ETH or IB. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Suggested-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Use getter and iterator to access vport/repBodong Wang
With only PF and VF, it is sufficient to have the vport/rep array index as the vport number. This is because PF and VF vports numbers are consecutive serial numbers. In downstream patches with introducing of ECPF and UPLINK vports, it's not consecutive any more. Use getter to get specific vport/rep, and use iterator to traversal a list of vport/rep. This hides the translation between array index and vport number, and provides flexibility of using different translation mechanism in the future. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Suggested-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Split VF and special vports for offloads modeBodong Wang
When driver is entering offloads mode, there are two major tasks to do: initialize flow steering and create representors. Flow steering should make sure enough flow table/group spaces are reserved for all reps. Representors will be created in a group, all or none. With the introduction of ECPF, flow steering should still reserve the same spaces. But, the representors are not always loaded/unloaded in a single piece. Once ECPF is in offloads mode, it will get the number of VF changing event from host PF. In such scenario, only the VF reps should be loaded/unloaded, not the reps for special vports (such as the uplink vport). Thus, when entering offloads mode, driver should specify the total number of reps, and the number of VF reps separately. When leaving offloads mode, the cleanup should use the information self-contained in eswitch such as number of VFs. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Refactor offloads flow steering init/cleanupBodong Wang
E-switch offloads mode initialize/cleanup multiple steering related entities (flow table/group). Refactor these operations to internal helper functions for better block design. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Properly refer to host PF vport as other vportBodong Wang
Commands referring to vports use the following scheme: 1. When referring to my own vport, put 0 in vport and 0 in other_vport. 2. When referring to another vport, put the vport number of the referred vport and put 1 in other_vport. It was assumed that driver is accessing other vport when vport number is greater than 0. With the above scheme, the case that ECPF eswitch manager is trying to access host PF vport will fall over with scheme 1 as the vport number is 0. This is apparently wrong as driver is trying to refer other vport. As such usage can only happen in the eswitch context, change relevant functions to provide other vport input properly. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: E-Switch, Properly refer to the esw manager vportBodong Wang
In SmartNIC mode, the eswitch manager is not necessarily the PF (vport 0). Use a helper function to get the correct eswitch manager vport number and cache on the eswitch instance for fast reference. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15net/mlx5: Correctly set LAG mode for ECPFBodong Wang
When bonding is added, driver assumes that it's RoCE LAG if no VF is enabled. This is not enough for ECPF as the VF is enabled in host PF side. LAG should only choose RoCE mode when both slave devices meet conditions below: 1. E-Switch offloads mode is NONE. 2. No VF is enabled. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Merge mlx5-next shared branched into net-next, From Bodong Wang: 1) Introduction of ECPF (Embedded CPU Physical Function), and low level bits for mlx5 SmartNic capabilities support. 2) Vport enumeration refactoring that affect mlx5_ib and mlx5_core From Aya Levin, 3) Add support for 50Gbps per lane link modes in the Port Type and Speed register (PTYS) 4) Refactor low level query functions for PTYS register 5) Add support for 50Gbps per lane link modes to mlx5_ib Note: due to a change in API in mlx5/core and a later patch from net-next, a fixup was squashed with this merge commit that replaces FDB_UPLINK_VPORT with MLX5_VPORT_UPLINK which exists only in upstream net-next. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge tag 'for-linus-20190215' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Ensure we insert into the hctx dispatch list, if a request is marked as DONTPREP (Jianchao) - NVMe pull request, single missing unlock on error fix (Keith) - MD pull request, single fix for a potentially data corrupting issue (Nate) - Floppy check_events regression fix (Yufen) * tag 'for-linus-20190215' of git://git.kernel.dk/linux-block: md/raid1: don't clear bitmap bits on interrupted recovery. floppy: check_events callback should not return a negative number nvme-pci: add missing unlock for reset error blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue
2019-02-15Merge tag 'for-5.0/dm-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix bug in DM crypt's sizing of its block integrity tag space, resulting in less memory use when DM crypt layers on DM integrity. - Fix a long-standing DM thinp crash consistency bug that was due to improper handling of FUA. This issue is specific to writes that fill an entire thinp block which needs to be allocated. * tag 'for-5.0/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix bug where bio that overwrites thin block ignores FUA dm crypt: don't overallocate the integrity tag space
2019-02-15Merge tag 'mmc-v5.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes intended for v5.0-rc7. MMC core: - Fix deadlock bug for block I/O requests MMC host: - sunxi: Disable broken HS-DDR mode for H5 by default - sunxi: Avoid unsupported speed modes declared via DT - meson-gx: Restore interrupt name" * tag 'mmc-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: meson-gx: fix interrupt name mmc: block: handle complete_work on separate workqueue mmc: sunxi: Filter out unsupported modes declared in the device tree mmc: sunxi: Disable HS-DDR mode for H5 eMMC controller by default
2019-02-15Merge tag 'drm-fixes-2019-02-15-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Usual pull request, little larger than I'd like but nothing too strange in it. Willy found an bug in the lease ioctl calculations, but it's a drm master only ioctl which makes it harder to mess with. i915: - combo phy programming fix - opregion version check fix for VBT RVDA lookup - gem mmap ioctl race fix - fbdev hpd during suspend fix - array size bounds check fix in pmu amdgpu: - Vega20 psp fix - Add vrr range to debugfs for freesync debugging sched: - Scheduler race fix vkms: - license header fixups imx: - Fix CSI register offsets for i.MX51 and i.MX53. - Fix delayed page flip completion events on i.MX6QP due to unexpected behaviour of the PRE when issuing NOP buffer updates to the same buffer address. - Stop throwing errors for plane updates on disabled CRTCs when a userspace process is killed while a plane update is pending. - Add missing of_node_put cleanup in imx_ldb_bind" * tag 'drm-fixes-2019-02-15-1' of git://anongit.freedesktop.org/drm/drm: drm: Use array_size() when creating lease drm/amdgpu/psp11: TA firmware is optional (v3) drm/i915/opregion: rvda is relative from opregion base in opregion 2.1+ drm/i915/opregion: fix version check drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set drm/i915: Block fbdev HPD processing during suspend drm/i915/pmu: Fix enable count array size and bounds checking drm/i915/cnl: Fix CNL macros for Voltage Swing programming drm/i915/icl: combo port vswing programming changes per BSPEC drm/vkms: Fix license inconsistent drm/amd/display: Expose connector VRR range via debugfs drm/sched: Always trace the dependencies we wait on, to fix a race. gpu: ipu-v3: pre: don't trigger update if buffer address doesn't change gpu: ipu-v3: Fix CSI offsets for imx53 drm/imx: imx-ldb: add missing of_node_puts gpu: ipu-v3: Fix i.MX51 CSI control registers offset drm/imx: ignore plane updates on disabled crtcs
2019-02-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a crash on resume in the ccree driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccree - fix resume race condition on init
generated by cgit (git 2.34.1) at 2024-05-22 13:11:56 +0000