summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-07-26nvme: validate admin queue before unquiesceScott Bauer
With a misbehaving controller it's possible we'll never enter the live state and create an admin queue. When we fail out of reset work it's possible we failed out early enough without setting up the admin queue. We tear down queues after a failed reset, but needed to do some more sanitization. Fixes 443bd90f2cca: "nvme: host: unquiesce queue in nvme_kill_queues()" [ 189.650995] nvme nvme1: pci function 0000:0b:00.0 [ 317.680055] nvme nvme0: Device not ready; aborting reset [ 317.680183] nvme nvme0: Removing after probe failure status: -19 [ 317.681258] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 317.681397] general protection fault: 0000 [#1] SMP KASAN [ 317.682984] CPU: 3 PID: 477 Comm: kworker/3:2 Not tainted 4.13.0-rc1+ #5 [ 317.683112] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016 [ 317.683284] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 317.683398] task: ffff8803b0990000 task.stack: ffff8803c2ef0000 [ 317.683516] RIP: 0010:blk_mq_unquiesce_queue+0x2b/0xa0 [ 317.683614] RSP: 0018:ffff8803c2ef7d40 EFLAGS: 00010282 [ 317.683716] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1006fbdcde3 [ 317.683847] RDX: 0000000000000038 RSI: 1ffff1006f5a9245 RDI: 0000000000000000 [ 317.683978] RBP: ffff8803c2ef7d58 R08: 1ffff1007bcdc974 R09: 0000000000000000 [ 317.684108] R10: 1ffff1007bcdc975 R11: 0000000000000000 R12: 00000000000001c0 [ 317.684239] R13: ffff88037ad49228 R14: ffff88037ad492d0 R15: ffff88037ad492e0 [ 317.684371] FS: 0000000000000000(0000) GS:ffff8803de6c0000(0000) knlGS:0000000000000000 [ 317.684519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 317.684627] CR2: 0000002d1860c000 CR3: 000000045b40d000 CR4: 00000000003406e0 [ 317.684758] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 317.684888] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 317.685018] Call Trace: [ 317.685084] nvme_kill_queues+0x4d/0x170 [nvme_core] [ 317.685185] nvme_remove_dead_ctrl_work+0x3a/0x90 [nvme] [ 317.685289] process_one_work+0x771/0x1170 [ 317.685372] worker_thread+0xde/0x11e0 [ 317.685452] ? pci_mmcfg_check_reserved+0x110/0x110 [ 317.685550] kthread+0x2d3/0x3d0 [ 317.685617] ? process_one_work+0x1170/0x1170 [ 317.685704] ? kthread_create_on_node+0xc0/0xc0 [ 317.685785] ret_from_fork+0x25/0x30 [ 317.685798] Code: 0f 1f 44 00 00 55 48 b8 00 00 00 00 00 fc ff df 48 89 e5 41 54 4c 8d a7 c0 01 00 00 53 48 89 fb 4c 89 e2 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 75 50 48 8b bb c0 01 00 00 e8 33 8a f9 00 0f ba b3 [ 317.685872] RIP: blk_mq_unquiesce_queue+0x2b/0xa0 RSP: ffff8803c2ef7d40 [ 317.685908] ---[ end trace a3f8704150b1e8b4 ]--- Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-26perf: qcom_l2: fix column exclusion checkNeil Leeder
The check for column exclusion did not verify that the event being checked was an L2 event, and not a software event. Software events should not be checked for column exclusion. This resulted in a group with both software and L2 events sometimes incorrectly rejecting the L2 event for column exclusion and not counting it. Add a check for PMU type before applying column exclusion logic. Fixes: 21bdbb7102edeaeb ("perf: add qcom l2 cache perf events driver") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-25Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
2017-07-25Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuidLinus Torvalds
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
2017-07-25Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
2017-07-25MD: fix warnning for UP caseShaohua Li
spin_is_locked always returns 0 for UP case, so ignores it Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-25Merge branch 'stable/for-jens-4.13' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull xen-blkfront fixes from Konrad for 4.13.
2017-07-25drm/amd/powerplay: fix AVFS voltage offset for Vega10Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25drm/amdgpu/gfx9: simplify and fix GRBM index selectionNicolai Hähnle
Copy the approach taken by gfx8, which simplifies the code, and set the instance index properly. The latter is required for debugging, e.g. for reading wave status by UMR. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25drm/amdgpu: Fix blocking in RCU critical section(v2)Alex Xie
In RCU read-side critical sections, blocking or sleeping is prohibited. v2: Unlock RCU for the code path where result==NULL. (David Zhou) Update subject Tested-by and reported by: Dave Airlie <airlied@redhat.com> [ 141.965723] ============================= [ 141.965724] WARNING: suspicious RCU usage [ 141.965726] 4.12.0-rc7 #221 Not tainted [ 141.965727] ----------------------------- [ 141.965728] /home/airlied/devel/kernel/linux-2.6/include/linux/rcupdate.h:531 Illegal context switch in RCU read-side critical section! [ 141.965730] other info that might help us debug this: [ 141.965731] rcu_scheduler_active = 2, debug_locks = 0 [ 141.965732] 1 lock held by amdgpu_cs:0/1332: [ 141.965733] #0: (rcu_read_lock){......}, at: [<ffffffffa01a0d07>] amdgpu_bo_list_get+0x0/0x109 [amdgpu] [ 141.965774] stack backtrace: [ 141.965776] CPU: 6 PID: 1332 Comm: amdgpu_cs:0 Not tainted 4.12.0-rc7 #221 [ 141.965777] Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2603 06/26/2015 [ 141.965778] Call Trace: [ 141.965782] dump_stack+0x68/0x92 [ 141.965785] lockdep_rcu_suspicious+0xf7/0x100 [ 141.965788] ___might_sleep+0x56/0x1fc [ 141.965790] __might_sleep+0x68/0x6f [ 141.965793] __mutex_lock+0x4e/0x7b5 [ 141.965817] ? amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965820] ? lock_acquire+0x125/0x1b9 [ 141.965844] ? amdgpu_bo_list_set+0x464/0x464 [amdgpu] [ 141.965846] mutex_lock_nested+0x16/0x18 [ 141.965848] ? mutex_lock_nested+0x16/0x18 [ 141.965872] amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965895] amdgpu_cs_ioctl+0x4a0/0x17dd [amdgpu] [ 141.965898] ? radix_tree_node_alloc.constprop.11+0x77/0xab [ 141.965916] drm_ioctl+0x264/0x393 [drm] [ 141.965939] ? amdgpu_cs_find_mapping+0x83/0x83 [amdgpu] [ 141.965942] ? trace_hardirqs_on_caller+0x16a/0x186 Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-25nbd: clear disconnected on reconnectJosef Bacik
If our device loses its connection for longer than the dead timeout we will set NBD_DISCONNECTED in order to quickly fail any pending IO's that flood in after the IO's that were waiting during the dead timer. However if we re-connect at some point in the future we'll still see this DISCONNECTED flag set if we then lose our connection again after that, which means we won't get notifications for our newly lost connections. Fix this by just clearing the DISCONNECTED flag on reconnect in order to make sure everything works as it's supposed to. Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-25dm zoned: remove test for impossible REQ_OP_FLUSH conditionsMikulas Patocka
The value REQ_OP_FLUSH is only used by the block code for request-based devices. Remove the tests for REQ_OP_FLUSH from the bio-based dm-zoned-target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: bump target versionHeinz Mauelshagen
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c ("md: fix deadlock between mddev_suspend() and md_write_start()") is available. This version change allows userspace to detect that MD fix is available. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: avoid mddev->suspended accessHeinz Mauelshagen
Use runtime flag to ensure that an mddev gets suspended/resumed just once. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: fix activation check in validate_raid_redundancy()Heinz Mauelshagen
During growing reshapes (i.e. stripes being added to a raid set), the new stripe images are not in-sync and not part of the raid set until the reshape is started. LVM2 has to request multiple table reloads involving superblock updates in order to reflect proper size of SubLVs in the cluster. Before a stripe adding reshape starts, validate_raid_redundancy() fails as a result of that because it checks the total number of devices against the number of rebuild ones rather than the actual ones in the raid set (as retrieved from the superblock) thus resulting in failed raid4/5/6/10 redundancy checks. E.g. convert 3 stripes -> 7 stripes raid5 (which only allows for maximum 1 device to fail) requesting +4 delta disks causing 4 devices to rebuild during reshaping thus failing activation. To fix this, move validate_raid_redundancy() to get access to the current raid_set members. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm raid: remove WARN_ON() in raid10_md_layout_to_format()Heinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25nvme-pci: fix HMB size calculationChristoph Hellwig
It's possible the preferred HMB size may not be a multiple of the chunk_size. This patch moves len to function scope and uses that in the for loop increment so the last iteration doesn't cause the total size to exceed the allocated HMB size. Based on an earlier patch from Keith Busch. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
2017-07-25nvme-fc: revise TRADDR parsingJames Smart
The FC-NVME spec hasn't locked down on the format string for TRADDR. Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>" where the wwn's are hex values but not prefixed by 0x. Most implementations so far expect a string format of "nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport uses the match_u64 parser which requires a leading 0x prefix to set the base properly. If it's not there, a match will either fail or return a base 10 value. The resolution in T11 is pushing out. Therefore, to fix things now and to cover any eventuality and any implementations already in the field, this patch adds support for both formats. The change consists of replacing the token matching routine with a routine that validates the fixed string format, and then builds a local copy of the hex name with a 0x prefix before calling the system parser. Note: the same parser routine exists in both the initiator and target transports. Given this is about the only "shared" item, we chose to replicate rather than create an interdendency on some shared code. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25nvme-fc: address target disconnect race conditions in fcp io submitJames Smart
There are cases where threads are in the process of submitting new io when the LLDD calls in to remove the remote port. In some cases, the next io actually goes to the LLDD, who knows the remoteport isn't present and rejects it. To properly recovery/restart these i/o's we don't want to hard fail them, we want to treat them as temporary resource errors in which a delayed retry will work. Add a couple more checks on remoteport connectivity and commonize the busy response handling when it's seen. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25nvme: also provide a UUID in the WWID sysfs attributeJohannes Thumshirn
The WWID sysfs attribute can provide multiple means of a World Wide ID for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation of VID, Serial Number, Model and the Namespace ID in this order of preference. If the target also sends us a UUID use the UUID for identification and give it the highest priority. This eases generation of /dev/disk/by-* symlinks. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fix (missing IRQs) for devices that require 'always poll' quirk, from Dmitry Torokhov - new device ID addition to Ortek driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: ortek: add one more buggy device HID: usbhid: fix "always poll" quirk
2017-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: set change and reference bit on lazy key enablement s390: chp: handle CRW_ERC_INIT for channel-path status change s390/perf: fix problem state detection
2017-07-25xen/blkfront: always allocate grants first from per-queue persistent grantsDongli Zhang
This patch partially reverts 3df0e50 ("xen/blkfront: pseudo support for multi hardware queues/rings"). The xen-blkfront queue/ring might hang due to grants allocation failure in the situation when gnttab_free_head is almost empty while many persistent grants are reserved for this queue/ring. As persistent grants management was per-queue since 73716df ("xen/blkfront: make persistent grants pool per-queue"), we should always allocate from persistent grants first. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-07-25xen-blkfront: fix mq start/stop raceJunxiao Bi
When ring buf full, hw queue will be stopped. While blkif interrupt consume request and make free space in ring buf, hw queue will be started again. But since start queue is protected by spin lock while stop not, that will cause a race. interrupt: process: blkif_interrupt() blkif_queue_rq() kick_pending_request_queues_locked() blk_mq_start_stopped_hw_queues() clear_bit(BLK_MQ_S_STOPPED, &hctx->state) blk_mq_stop_hw_queue(hctx) blk_mq_run_hw_queue(hctx, async) If ring buf is made empty in this case, interrupt will never come, then the hw queue will be stopped forever, all processes waiting for the pending io in the queue will hung. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-07-25dm bufio: fix error code in dm_bufio_write_dirty_buffers()Dan Carpenter
We should be returning normal negative error codes here. The "a" variables comes from &c->async_write_error which is a blk_status_t converted to a regular error code. In the current code, the blk_status_t gets propogated back to pool_create() and eventually results in an Oops. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm integrity: test for corrupted disk format during table loadMikulas Patocka
If the dm-integrity superblock was corrupted in such a way that the journal_sections field was zero, the integrity target would deadlock because it would wait forever for free space in the journal. Detect this situation and refuse to activate the device. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 7eada909bfd7 ("dm: add integrity target") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25dm integrity: WARN_ON if variables representing journal usage get out of syncMikulas Patocka
If this WARN_ON triggers it speaks to programmer error, and likely implies corruption, but no released kernel should trigger it. This WARN_ON serves to assist DM integrity developers as changes are made/tested in the future. BUG_ON is excessive for catching programmer error, if a user or developer would like warnings to trigger a panic, they can enable that via /proc/sys/kernel/panic_on_warn Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25virtio-net: fix module unloadingAndrew Jones
Unregister the driver before removing multi-instance hotplug callbacks. This order avoids the warning issued from __cpuhp_remove_state_cpuslocked when the number of remaining instances isn't yet zero. Fixes: 8017c279196a ("net/virtio-net: Convert to hotplug state machine") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: coding format cleanupWei Wang
Clean up the comment format. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: deflate via a page listLiang Li
This patch saves the deflated pages to a list, instead of the PFN array. Accordingly, the balloon_pfn_to_page() function is removed. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio_blk: Use sysfs_match_string() helperAndy Shevchenko
Use sysfs_match_string() helper instead of open coded variant. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-07-25Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
two more fixes for issues nouveau found in fedora 26. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/bar/gf100: fix access to upper half of BAR2 drm/nouveau/disp/nv50-: bump max chans to 21
2017-07-25drm/nouveau/bar/gf100: fix access to upper half of BAR2Ben Skeggs
Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
2017-07-25drm/nouveau/disp/nv50-: bump max chans to 21Ilia Mirkin
GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-25drm/i915/gvt: Extend KBL platform support in GVT-gJian Jun Chen
Extend KBL platform support in GVT-g. Validation tests are done on KBL server and KBL NUC. Both show the same quality. Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-07-24ACPI: NUMA: Fix typo in the full name of SRATRoss Zwisler
To save someone the time of searching the ACPI spec for "Static Resource Affinity Table". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24thunderbolt: use uuid_t instead of uuid_beChristoph Hellwig
Switch thunderbolt to the new uuid type. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2017-07-24HID: ortek: add one more buggy deviceBenjamin Tissoires
The iHome keypad also requires the same tweak we are doing for other Ortek devices. Reported-by: Mairin Duffy <duffy@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-24md/raid5: add thread_group worker async_tx_issue_pending_allOfer Heifetz
Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by: Ofer Heifetz <oferh@marvell.com> Cc: stable@vger.kernel.org Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-24xen-blkfront: Fix handling of non-supported operationsBart Van Assche
This patch fixes the following sparse warnings: drivers/block/xen-blkfront.c:916:45: warning: incorrect type in argument 2 (different base types) drivers/block/xen-blkfront.c:916:45: expected restricted blk_status_t [usertype] error drivers/block/xen-blkfront.c:916:45: got int [signed] error drivers/block/xen-blkfront.c:1599:47: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1599:47: expected int [signed] error drivers/block/xen-blkfront.c:1599:47: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1607:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1607:55: expected int [signed] error drivers/block/xen-blkfront.c:1607:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1625:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1625:55: expected int [signed] error drivers/block/xen-blkfront.c:1625:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1628:62: warning: restricted blk_status_t degrades to integer Compile-tested only. Fixes: commit 2a842acab109 ("block: introduce new block status code type") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: <xen-devel@lists.xenproject.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-24Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes misc vmwgfx fixes. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: constify pci_device_id. drm/vmwgfx: Fix gcc-7.1.1 warning drm/vmwgfx: Fix cursor hotspot issue with Wayland on Fedora drm/vmwgfx: Limit max desktop dimensions to 8Kx8K drm/vmwgfx: dma-buf: Constify ttm_place structures. drm/vmwgfx: fix comment mistake for vmw_cmd_dx_set_index_buffer() drm/vmwgfx: Use dma_pool_zalloc drm/vmwgfx: Fix handling of errors returned by 'vmw_cotable_alloc()' drm/vmwgfx: Fix NULL pointer comparison
2017-07-24Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau regression fixes. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend drm/nouveau/kms/nv50: update vblank state in response to modeset actions drm/nouveau/disp: add tv encoders to output resource mapping drm/nouveau/i2c/gf119-: add support for address-only transactions
2017-07-24drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspendBen Skeggs
These on()/off() calls should be done as a result of modesetting actions, and as we shut down all heads already on unload/suspend, it's pointless to call off() again. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/kms/nv50: update vblank state in response to modeset actionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/disp: add tv encoders to output resource mappingBen Skeggs
We don't support them on G80, but we need to add them to the mapping to avoid triggering a WARN_ON() on GPUs where the ports are present. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/i2c/gf119-: add support for address-only transactionsBen Skeggs
Since switching the I2C-over-AUX helpers, there have been regressions on some display combinations due to us not having support for "address only" transactions. This commits enables support for them for GF119 and newer. Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/rockchip: fix Kconfig dependenciesArnd Bergmann
A bug that I had fixed earlier just came back, with CONFIG_EXTCON=m, the rockchip drm driver will fail to link: drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_get_port_lanes': cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x30): undefined reference to `extcon_get_state' cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x6c): undefined reference to `extcon_get_property' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_check_sink_connection': cdn-dp-core.c:(.text.cdn_dp_check_sink_connection+0x80): undefined reference to `extcon_get_state' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_enable': cdn-dp-core.c:(.text.cdn_dp_enable+0x748): undefined reference to `extcon_get_property' The problem is that that the sub-drivers are now all linked into the main rockchip drm module, which breaks all the Kconfig dependencies that are specified in the options for those sub-drivers. This clarifies the dependency to ensure that we can only turn on the DP driver when EXTCON is reachable. As the 'select' statements can now cause additional options to become built-in when they should be loadable modules, I'm moving those into the main driver config option. The dependency on DRM_ROCKCHIP can be reduced into a single 'if' statement here for brevity, but this has no functional effect. Fixes: b6705157b2db ("drm/rockchip: add extcon dependency for DP") Fixes: 8820b68bd378 ("drm/rockchip: Refactor the component match logic.") Link: https://patchwork.kernel.org/patch/9648761/ Acked-by: Guenter Roeck <groeck@chromium.org> Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721211214.3386387-1-arnd@arndb.de
2017-07-23parisc: pdc_stable: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23xen/balloon: don't online new memory initiallyJuergen Gross
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-23xen/grant-table: log the lack of grantsWengang Wang
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
generated by cgit (git 2.34.1) at 2024-06-28 16:43:30 +0000