| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"This is a single serial driver fix for a build issue that showed up
due to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems"
* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.18-rc2 that resolves an
endian issue for the r8188eu driver. It has been in linux-next all
this week with no reported problems"
* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Fix PPPoE tag insertion on little endian systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"A single driver fix. It resolves the build warning issue on 32bit
systems in the habannalabs driver that came in during the 5.18-rc1
merge cycle.
It has been in linux-next for all this week with no reported problems"
* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Fix test build failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- A fix for a long standing bug in the ARM GICv3 redistributor
polling which uses the wrong bit number to test.
- Prevent translation of bogus ACPI table entries which map device
interrupts into the IPI space on ARM GICs.
- Don't write into the pending register of ARM GICV4 before the scan
in hardware has completed.
- A set of build and correctness fixes for the Qualcomm MPM driver"
* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic, gic-v3: Prevent GSI to SGI translations
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
irq/qcom-mpm: Fix build error without MAILBOX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a race condition with consumers accessing the fields of GPIO IRQ
chips before they're fully initialized
* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Restrict usage of GPIO chip irq members before initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- add support for new devices (ufs, mvsas)
- a major set of fixes in lpfc
- get rid of a driver specific ioctl in pcmraid
- a major rework of aha152x to get rid of the scsi_pointer.
- minor fixes and obvious changes including several spelling updates.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
scsi: ufs: ufshpb: Fix a NULL check on list iterator
scsi: sd: Clean up gendisk if device_add_disk() failed
scsi: message: fusion: Remove redundant variable dmp
scsi: mvsas: Add PCI ID of RocketRaid 2640
scsi: sd: sd_read_cpr() requires VPD pages
scsi: mpt3sas: Fail reset operation if config request timed out
scsi: sym53c500_cs: Stop using struct scsi_pointer
scsi: ufs: ufs-pci: Add support for Intel MTL
scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment
scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"
scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"
scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
scsi: aic7xxx: Use standard PCI subsystem, subdevice defines
scsi: ufs: qcom: Drop custom Android boot parameters
scsi: core: sysfs: Remove comments that conflict with the actual logic
scsi: hisi_sas: Remove stray fallthrough annotation
scsi: virtio-scsi: Eliminate anonymous module_init & module_exit
scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"
...
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here, just a few small fixes:
- Small series of neglected drbd patches (Christoph, Lv, Xiaomeng)
- Remove dead variable in cdrom (Enze)"
* tag 'block-5.18-2022-04-08' of git://git.kernel.dk/linux-block:
drbd: set QUEUE_FLAG_STABLE_WRITES
drbd: fix an invalid memory access caused by incorrect use of list iterator
drbd: Fix five use after free bugs in get_initial_state
cdrom: remove unused variable
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several bug fixes for old bugs:
- Welcome Leon as co-maintainer for RDMA so we are back to having two
people
- Some corner cases are fixed in mlx5's MR code
- Long standing CM bug where a DREQ at the wrong time can result in a
long timeout
- Missing locking and refcounting in hf1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hfi1: Fix use-after-free bug for mm struct
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD
RDMA/mlx5: Add a missing update of cache->last_add
RDMA/mlx5: Don't remove cache MRs when a delay is needed
MAINTAINERS: Update qib and hfi1 related drivers
MAINTAINERS: Add Leon Romanovsky to RDMA maintainers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These revert a problematic commit from the 5.17 development cycle and
finalize the elimination of acpi_bus_get_device() that mostly took
place during the recent merge window.
Specifics:
- Revert an ACPI processor driver change related to cache
invalidation in acpi_idle_play_dead() that clearly was a mistake
and introduced user-visible regressions (Akihiko Odaki).
- Replace the last instance of acpi_bus_get_device() added during the
recent merge window and drop the function to prevent more users of
it from being added (Rafael Wysocki)"
* tag 'acpi-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Eliminate acpi_bus_get_device()
Revert "ACPI: processor: idle: Only flush cache on entering C3"
|
|
0day reports that wait_for_media_ready() declares an @rc variable twice.
>> drivers/cxl/pci.c:439:7: warning: Local variable 'rc' shadows outer variable [shadowVariable]
int rc;
^
drivers/cxl/pci.c:431:6: note: Shadowed declaration
int rc, i;
^
drivers/cxl/pci.c:439:7: note: Shadow variable
int rc;
^
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 523e594d9cc0 ("cxl/pci: Implement wait for media active")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164944636936.455177.14136200464724208233.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages(). A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write(). Another is corruption of an mm struct that is
in use by another task.
Fixes: 3d2a9d642512 ("IB/hfi1: Ensure correct mm is used at all times")
Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
* acpi-bus:
ACPI: bus: Eliminate acpi_bus_get_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The two main things to note are:
(1) The bulk of the diffstat is us reverting a horrible bodge we had
in place to ease the merging of maple tree during the merge
window (which turned out not to be needed, but anyway)
(2) The TLB invalidation fix is done in core code, as suggested by
(and Acked-by) Peter.
Summary:
- Revert temporary bodge in MTE coredumping to ease maple tree integration
- Fix stack frame size warning reported with 64k pages
- Fix stop_machine() race with instruction text patching
- Ensure alternatives patching routines are not instrumented
- Enable Spectre-BHB mitigation for Cortex-A78AE
- Fix hugetlb TLB invalidation when contiguous hint is used
- Minor perf driver fixes
- Fix some typos"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
arm64: Add part number for Arm Cortex-A78AE
arm64: patch_text: Fixup last cpu should be master
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
arm64: alternatives: mark patch_alternative() as `noinstr`
perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER
perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
arm64: Fix comments in macro __init_el2_gicv3
arm64: fix typos in comments
arch/arm64: Fix topology initialization for core scheduling
arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()
Revert "arm64: Change elfcore for_each_mte_vma() to use VMA iterator"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that have arrived since the merge window,
the most noticable one is a fix for unmapping messages when the
mapping was done with the struct device supplied to do the mapping
overridden"
* tag 'spi-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
spi: core: add dma_map_dev for __spi_unmap_msg()
spi: mxic: Fix an error handling path in mxic_spi_probe()
spi: rpc-if: Fix RPM imbalance in probe error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few small driver specific fixes for v5.18, plus an update to the
MAINTAINERS file"
* tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
MAINTAINERS: Fix reviewer info for a few ROHM ICs
regulator: atc260x: Fix missing active_discharge_on setting
regulator: rtq2134: Fix missing active_discharge_on setting
regulator: wm8994: Add an off-on delay for WM8994 variant
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"
* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: improve API to make clear mmc_hw_reset is for cards
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
mmc: renesas_sdhi: special 4tap settings only apply to HS400
mmc: core: Fixup support for writeback-cache for eMMC and SD
mmc: block: Check for errors after write on SPI
mmc: mmci: stm32: correctly check all elements of sg list
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix boot regression due to a NULL-ptr dereference on OMAP machines
* tag 'iommu-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/omap: Fix regression in probe for NULL pointer dereference
|
|
Fix:
In file included from <command-line>:0:0:
In function ‘ddr_perf_counter_enable’,
inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
...
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:
__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24
This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.
Looks like the regression already happened with an earlier commit
6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.
Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Suman Anna <s-anna@ti.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To make it unambiguous that mmc_hw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
Also, all users are converted.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pull drm fixes from Dave Airlie:
"Main set of fixes for rc2, mostly amdgpu, but some dma-fence fixups as
well, along with some other misc ones.
dma-fence:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
bridge:
- Try all possible cases for bridge/panel detection.
bindings:
- Don't require input port for MIPI-DSI, and make width/height mandatory.
fbdev:
- Fix unregistering of framebuffers without device.
nouveau:
- Fix a crash when booting with nouveau on tegra.
amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes
- VCN 3.0 fixes
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix
amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
- Event fix
panel:
- ili9341: Fix optional regulator handling
imx:
- Catch an EDID allocation failure in imx-ldb
- fix a leaked drm display mode on DT parsing error in parallel-display
- properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
- fix the IPU clock frequency debug printout in ipu-di"
* tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm: (61 commits)
dt-bindings: display: panel: mipi-dbi-spi: Make width-mm/height-mm mandatory
fbdev: Fix unregistering of framebuffers without device
drm/amdgpu/smu10: fix SoC/fclk units in auto mode
drm/amd/display: update dcn315 clock table read
drm/amdgpu/display: change pipe policy for DCN 2.1
drm/amd/display: Add configuration options for AUX wake work around.
drm/amd/display: remove assert for odm transition case
drm/amdgpu: don't use BACO for reset in S3
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
drm/amdkfd: Create file descriptor after client is added to smi_clients list
drm/amdgpu: Sync up header and implementation to use the same parameter names
drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
amd/display: set backlight only if required
drm/amd/display: Fix allocate_mst_payload assert on resume
drm/amd/display: Revert FEC check in validation
drm/amd/display: Add work around for AUX failure on wake.
drm/amd/display: Clear optc false state when disable otg
drm/amd/display: Enable power gating before init_pipes
drm/amd/display: Remove redundant dsc power gating from init_hw
drm/amd/display: Correct Slice reset calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- mctp: correct mctp_i2c_header_create result
- eth: fungible: fix reference to __udivdi3 on 32b builds
- eth: micrel: remove latencies support lan8814
Previous releases - regressions:
- bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
- vrf: fix packet sniffing for traffic originating from ip tunnels
- rxrpc: fix a race in rxrpc_exit_net()
- dsa: revert "net: dsa: stop updating master MTU from master.c"
- eth: ice: fix MAC address setting
Previous releases - always broken:
- tls: fix slab-out-of-bounds bug in decrypt_internal
- bpf: support dual-stack sockets in bpf_tcp_check_syncookie
- xdp: fix coalescing for page_pool fragment recycling
- ovs: fix leak of nested actions
- eth: sfc:
- add missing xdp queue reinitialization
- fix using uninitialized xdp tx_queue
- eth: ice:
- clear default forwarding VSI during VSI release
- fix broken IFF_ALLMULTI handling
- synchronize_rcu() when terminating rings
- eth: qede: confirm skb is allocated before using
- eth: aqc111: fix out-of-bounds accesses in RX fixup
- eth: slip: fix NPD bug in sl_tx_timeout()"
* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
drivers: net: slip: fix NPD bug in sl_tx_timeout()
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
qede: confirm skb is allocated before using
net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
net: phy: mscc-miim: reject clause 45 register accesses
net: axiemac: use a phandle to reference pcs_phy
dt-bindings: net: add pcs-handle attribute
net: axienet: factor out phy_node in struct axienet_local
net: axienet: setup mdio unconditionally
net: sfc: fix using uninitialized xdp tx_queue
rxrpc: fix a race in rxrpc_exit_net()
net: openvswitch: fix leak of nested actions
net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
net: openvswitch: don't send internal clone attribute to the userspace.
net: micrel: Fix KS8851 Kconfig
ice: clear cmd_type_offset_bsz for TX rings
ice: xsk: fix VSI state check in ice_xsk_wakeup()
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.18-rc2:
- Fix a crash when booting with nouveau on tegra.
- Don't require input port for MIPI-DSI, and make width/height mandatory.
- Fix unregistering of framebuffers without device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/58fa2262-3eb6-876d-7157-ab7a135696b7@linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-next-fixes for v5.18-rc2:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
- Try all possible cases for bridge/panel detection.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b8e6439-612e-f640-e380-51e834393e94@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Correctly propagate coherence information for VMbus devices (Michael
Kelley)
- Disable balloon and memory hot-add on ARM64 temporarily (Boqun Feng)
- Use barrier to prevent reording when reading ring buffer (Michael
Kelley)
- Use virt_store_mb in favour of smp_store_mb (Andrea Parri)
- Fix VMbus device object initialization (Andrea Parri)
- Deactivate sysctl_record_panic_msg on isolated guest (Andrea Parri)
- Fix a crash when unloading VMbus module (Guilherme G. Piccoli)
* tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()
Drivers: hv: balloon: Disable balloon and hot-add accordingly
Drivers: hv: balloon: Support status report for larger page sizes
Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
PCI: hv: Propagate coherence from VMbus device to PCI device
Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device
Drivers: hv: vmbus: Fix potential crash on module unload
Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register()
Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- Another fixup to the fast_init/crng_init split, this time in how much
entropy is being credited, from Jan Varho.
- As discussed, we now opportunistically call try_to_generate_entropy()
in /dev/urandom reads, as a replacement for the reverted commit. I
opted to not do the more invasive wait_for_random_bytes() change at
least for now, preferring to do something smaller and more obvious
for the time being, but maybe that can be revisited as things evolve
later.
- Userspace can use FUSE or userfaultfd or simply move a process to
idle priority in order to make a read from the random device never
complete, which breaks forward secrecy, fixed by overwriting
sensitive bytes early on in the function.
- Jann Horn noticed that /dev/urandom reads were only checking for
pending signals if need_resched() was true, a bug going back to the
genesis commit, now fixed by always checking for signal_pending() and
calling cond_resched(). This explains various noticeable signal
delivery delays I've seen in programs over the years that do long
reads from /dev/urandom.
- In order to be more like other devices (e.g. /dev/zero) and to
mitigate the impact of fixing the above bug, which has been around
forever (users have never really needed to check the return value of
read() for medium-sized reads and so perhaps many didn't), we now
move signal checking to the bottom part of the loop, and do so every
PAGE_SIZE-bytes.
* tag 'random-5.18-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: check for signals every PAGE_SIZE chunk of /dev/[u]random
random: check for signal_pending() outside of need_resched() check
random: do not allow user to keep crng key around on stack
random: opportunistically initialize on /dev/urandom reads
random: do not split fast init input in add_hwgenerator_randomness()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix a compilation warning due to an uninitialized variable in
ata_sff_lost_interrupt(), from me.
- Fix invalid internal command tag handling in the sata_dwc_460ex
driver, from Christian.
- Disable READ LOG DMA EXT with Samsung 840 EVO SSDs as this command
causes the drives to hang, from Christian.
- Change the config option CONFIG_SATA_LPM_POLICY back to its original
name CONFIG_SATA_LPM_MOBILE_POLICY to avoid potential problems with
users losing their configuration (as discussed during the merge
window), from Mario.
* tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
ata: sata_dwc_460ex: Fix crash due to OOB write
ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()
|
|
When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.
Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.
(Thread 1) | (Thread 2)
| slip_close()
| spin_lock_bh(&sl->lock)
| ...
... | sl->tty = NULL //(1)
sl_tx_timeout() | spin_unlock_bh(&sl->lock)
spin_lock(&sl->lock); |
... | ...
tty_chars_in_buffer(sl->tty)|
if (tty->ops->..) //(2) |
... | synchronize_rcu()
We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).
This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The megaraid_sas driver supports single LUN for RAID devices. That is LUN
0. All other LUNs are unsupported. When a device scan on a logical target
with invalid LUN number is invoked through sysfs, that target ends up
getting removed.
Add LUN ID validation in the slave destroy function to avoid the target
deletion.
Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.
Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We forgot to call blk_cleanup_disk() when device_add_disk() failed. This
would cause a memory leak of gendisk and sched_tags allocated in
elevator_init_mq()
Reference:https://syzkaller.appspot.com/x/log.txt?x=13b41dcb700000
Reported-and-tested-by: syzbot+f08c77040fa163a75a46@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220401011018.1026553-1-haowenchao@huawei.com
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Variable dmp is being assigned a value that is never read, the variable is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/message/fusion/mptbase.c:6667:39: warning: Although
the value stored to 'dmp' is used in the enclosing expression,
the value is never actually read from 'dmp' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220318003927.81471-1-colin.i.king@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As such it should be called inside the scsi_device_supports_vpd()
conditional.
Link: https://lore.kernel.org/r/20220302053559.32147-13-martin.petersen@oracle.com
Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support")
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are needed so move those to private command data.
Link: https://lore.kernel.org/r/accf71e293ba3aed6d18c8baeb405de8dfe7c935.1649235939.git.fthain@linux-m68k.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID and callbacks to support Intel Meteor Lake (MTL).
Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The start_addres argument of mpt3sas_check_same_4gb_region() was misnamed
in the function kdoc comment, resulting in the following warning when
compiling with W=1.
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Function parameter or
member 'start_address' not described in 'mpt3sas_check_same_4gb_region'
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Excess function
parameter 'reply_pool_start_address' description in
'mpt3sas_check_same_4gb_region'
Fix the argument name in the function kdoc comment to avoid it. While at
it, remove a useless blank line between the kdoc and function code.
Link: https://lore.kernel.org/r/20220404050041.594774-1-damien.lemoal@opensource.wdc.com
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The in_use_bm bitmap of struct sdebug_queue should be accessed under
protection of the qc_lock spinlock. Make sure that this lock is taken
before calling find_first_bit() at the beginning of the function
sdebug_blk_mq_poll().
Link: https://lore.kernel.org/r/20220404045547.579887-1-damien.lemoal@opensource.wdc.com
Fixes: 3fd07aecb750 ("scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull the remaining commits from 5.18/scsi-queue into fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-04-06:
amdgpu:
- VCN 3.0 fixes
- DCN 3.1.5 fix
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix
amdkfd:
- Event fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406170441.5779-1-alexander.deucher@amd.com
|
|
into drm-fixes
drm/imx: error handling and debug output fixes
Catch an EDID allocation failure in imx-ldb, fix a leaked drm display
mode on DT parsing error in parallel-display, properly remove the
dw_hdmi bridge in case the component_add fails in dw_hdmi-imx, and
fix the IPU clock frequency debug printout in ipu-di.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406155101.1271845-1-p.zabel@pengutronix.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/panel/ili9341: Fix optional regulator handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjwkvPp6UnePy4Q8@linux-uq9g.fritz.box
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-next-5.18-2022-03-25:
amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes
amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325183602.5718-1-alexander.deucher@amd.com
|
|
In 1448769c9cdb ("random: check for signal_pending() outside of
need_resched() check"), Jann pointed out that we previously were only
checking the TIF_NOTIFY_SIGNAL and TIF_SIGPENDING flags if the process
had TIF_NEED_RESCHED set, which meant in practice, super long reads to
/dev/[u]random would delay signal handling by a long time. I tried this
using the below program, and indeed I wasn't able to interrupt a
/dev/urandom read until after several megabytes had been read. The bug
he fixed has always been there, and so code that reads from /dev/urandom
without checking the return value of read() has mostly worked for a long
time, for most sizes, not just for <= 256.
Maybe it makes sense to keep that code working. The reason it was so
small prior, ignoring the fact that it didn't work anyway, was likely
because /dev/random used to block, and that could happen for pretty
large lengths of time while entropy was gathered. But now, it's just a
chacha20 call, which is extremely fast and is just operating on pure
data, without having to wait for some external event. In that sense,
/dev/[u]random is a lot more like /dev/zero.
Taking a page out of /dev/zero's read_zero() function, it always returns
at least one chunk, and then checks for signals after each chunk. Chunk
sizes there are of length PAGE_SIZE. Let's just copy the same thing for
/dev/[u]random, and check for signals and cond_resched() for every
PAGE_SIZE amount of data. This makes the behavior more consistent with
expectations, and should mitigate the impact of Jann's fix for the
age-old signal check bug.
---- test program ----
#include <unistd.h>
#include <signal.h>
#include <stdio.h>
#include <sys/random.h>
static unsigned char x[~0U];
static void handle(int) { }
int main(int argc, char *argv[])
{
pid_t pid = getpid(), child;
signal(SIGUSR1, handle);
if (!(child = fork())) {
for (;;)
kill(pid, SIGUSR1);
}
pause();
printf("interrupted after reading %zd bytes\n", getrandom(x, sizeof(x), 0));
kill(child, SIGTERM);
return 0;
}
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.
BUG: Kernel NULL pointer dereference on read at 0x00000060
Faulting instruction address: 0xc00000000080dfa4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[...]
CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1
NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000
CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
[c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
[c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
[c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
[c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
[c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
[...]
[c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
[c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250
The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.
Tested with 5.17 on qemu ppc64le emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org # v5.11+
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de
|
|
We want our pages not to change while they are being written.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bug is here:
idr_remove(&connection->peer_devices, vnr);
If the previous for_each_connection() don't exit early (no goto hit
inside the loop), the iterator 'connection' after the loop will be a
bogus pointer to an invalid structure object containing the HEAD
(&resource->connections). As a result, the use of 'connection' above
will lead to a invalid memory access (including a possible invalid free
as idr_remove could call free_layer).
The original intention should have been to remove all peer_devices,
but the following lines have already done the work. So just remove
this line and the unneeded label, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: c06ece6ba6f1b ("drbd: Turn connection->volumes into connection->peer_devices")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
