summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-02-03netdevsim: remove unused sdev codeTaehee Yoo
sdev.c code is merged into dev.c and is not used anymore. it would be removed. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo
vfnum buffer size and binary_len buffer size is received by user-space. So, this buffer size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the netdevsim module. So, this patch adds __GFP_NOWARN. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device echo 1000000000 > /sys/devices/netdevsim1/sriov_numvfs Splat looks like: [ 357.847266][ T1000] WARNING: CPU: 0 PID: 1000 at mm/page_alloc.c:4738 __alloc_pages_nodemask+0x2f3/0x740 [ 357.850273][ T1000] Modules linked in: netdevsim veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrx [ 357.852989][ T1000] CPU: 0 PID: 1000 Comm: bash Tainted: G B 5.5.0-rc5+ #270 [ 357.854334][ T1000] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 357.855703][ T1000] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 357.856669][ T1000] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 357.860272][ T1000] RSP: 0018:ffff8880b7f47bd8 EFLAGS: 00010246 [ 357.861009][ T1000] RAX: ffffed1016fe8f80 RBX: 1ffff11016fe8fae RCX: 0000000000000000 [ 357.861843][ T1000] RDX: 0000000000000000 RSI: 0000000000000017 RDI: 0000000000000000 [ 357.862661][ T1000] RBP: 0000000000040dc0 R08: 1ffff11016fe8f67 R09: dffffc0000000000 [ 357.863509][ T1000] R10: ffff8880b7f47d68 R11: fffffbfff2798180 R12: 1ffff11016fe8f80 [ 357.864355][ T1000] R13: 0000000000000017 R14: 0000000000000017 R15: ffff8880c2038d68 [ 357.865178][ T1000] FS: 00007fd9a5b8c740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 357.866248][ T1000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 357.867531][ T1000] CR2: 000055ce01ba8100 CR3: 00000000b7dbe005 CR4: 00000000000606f0 [ 357.868972][ T1000] Call Trace: [ 357.869423][ T1000] ? lock_contended+0xcd0/0xcd0 [ 357.870001][ T1000] ? __alloc_pages_slowpath+0x21d0/0x21d0 [ 357.870673][ T1000] ? _kstrtoull+0x76/0x160 [ 357.871148][ T1000] ? alloc_pages_current+0xc1/0x1a0 [ 357.871704][ T1000] kmalloc_order+0x22/0x80 [ 357.872184][ T1000] kmalloc_order_trace+0x1d/0x140 [ 357.872733][ T1000] __kmalloc+0x302/0x3a0 [ 357.873204][ T1000] nsim_bus_dev_numvfs_store+0x1ab/0x260 [netdevsim] [ 357.873919][ T1000] ? kernfs_get_active+0x12c/0x180 [ 357.874459][ T1000] ? new_device_store+0x450/0x450 [netdevsim] [ 357.875111][ T1000] ? kernfs_get_parent+0x70/0x70 [ 357.875632][ T1000] ? sysfs_file_ops+0x160/0x160 [ 357.876152][ T1000] kernfs_fop_write+0x276/0x410 [ 357.876680][ T1000] ? __sb_start_write+0x1ba/0x2e0 [ 357.877225][ T1000] vfs_write+0x197/0x4a0 [ 357.877671][ T1000] ksys_write+0x141/0x1d0 [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 79579220566c ("netdevsim: add SR-IOV functionality") Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfsTaehee Yoo
Debugfs APIs return valid pointer or error pointer. it doesn't return NULL. So, using IS_ERR is enough, not using IS_ERR_OR_NULL. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()Taehee Yoo
When netdevsim dev is being created, a debugfs directory is created. The variable "dev_ddir_name" is 16bytes device name pointer and device name is "netdevsim<dev id>". The maximum dev id length is 10. So, 16bytes for device name isn't enough. Test commands: modprobe netdevsim echo "1000000000 0" > /sys/bus/netdevsim/new_device Splat looks like: [ 249.622710][ T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880 [ 249.623658][ T900] Write of size 1 at addr ffff88804c527988 by task bash/900 [ 249.624521][ T900] [ 249.624830][ T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322 [ 249.625691][ T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 249.626712][ T900] Call Trace: [ 249.627103][ T900] dump_stack+0x96/0xdb [ 249.627639][ T900] ? number+0x824/0x880 [ 249.628173][ T900] print_address_description.constprop.5+0x1be/0x360 [ 249.629022][ T900] ? number+0x824/0x880 [ 249.629569][ T900] ? number+0x824/0x880 [ 249.630105][ T900] __kasan_report+0x12a/0x170 [ 249.630717][ T900] ? number+0x824/0x880 [ 249.631201][ T900] kasan_report+0xe/0x20 [ 249.631723][ T900] number+0x824/0x880 [ 249.632235][ T900] ? put_dec+0xa0/0xa0 [ 249.632716][ T900] ? rcu_read_lock_sched_held+0x90/0xc0 [ 249.633392][ T900] vsnprintf+0x63c/0x10b0 [ 249.633983][ T900] ? pointer+0x5b0/0x5b0 [ 249.634543][ T900] ? mark_lock+0x11d/0xc40 [ 249.635200][ T900] sprintf+0x9b/0xd0 [ 249.635750][ T900] ? scnprintf+0xe0/0xe0 [ 249.636370][ T900] nsim_dev_probe+0x63c/0xbf0 [netdevsim] [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix panic in nsim_dev_take_snapshot_write()Taehee Yoo
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: disable devlink reload when resources are being usedTaehee Yoo
devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix using uninitialized resourcesTaehee Yoo
When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix TC queue mapping.Michael Chan
The driver currently only calls netdev_set_tc_queue when the number of TCs is greater than 1. Instead, the comparison should be greater than or equal to 1. Even with 1 TC, we need to set the queue mapping. This bug can cause warnings when the number of TCs is changed back to 1. Fixes: 7809592d3e2e ("bnxt_en: Enable MSIX early in bnxt_init_one().") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix logic that disables Bus Master during firmware reset.Vasundhara Volam
The current logic that calls pci_disable_device() in __bnxt_close_nic() during firmware reset is flawed. If firmware is still alive, we're disabling the device too early, causing some firmware commands to not reach the firmware. Fix it by moving the logic to bnxt_reset_close(). If firmware is in fatal condition, we call pci_disable_device() before we free any of the rings to prevent DMA corruption of the freed rings. If firmware is still alive, we call pci_disable_device() after the last firmware message has been sent. Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.Michael Chan
bnxt_ulp_start() needs to be called before SRIOV is re-enabled after firmware reset. Re-enabling SRIOV may consume all the resources and may cause the RDMA driver to fail to get MSIX and other resources. Fix it by calling bnxt_ulp_start() first before calling bnxt_reenable_sriov(). We re-arrange the logic so that we call bnxt_ulp_start() and bnxt_reenable_sriov() in proper sequence in bnxt_fw_reset_task() and bnxt_open(). The former is the normal coordinated firmware reset sequence and the latter is firmware reset while the function is down. This new logic is now more straight forward and will now fix both scenarios. Fixes: f3a6d206c25a ("bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.") Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.Michael Chan
Put the current logic in bnxt_open() to re-enable SRIOV after detecting firmware reset into a new function bnxt_reenable_sriov(). This call needs to be invoked in the firmware reset path also in the next patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03net: stmmac: Delete txtimer in suspend()Nicolin Chen
When running v5.5 with a rootfs on NFS, memory abort may happen in the system resume stage: Unable to handle kernel paging request at virtual address dead00000000012a [dead00000000012a] address between user and kernel address ranges pc : run_timer_softirq+0x334/0x3d8 lr : run_timer_softirq+0x244/0x3d8 x1 : ffff800011cafe80 x0 : dead000000000122 Call trace: run_timer_softirq+0x334/0x3d8 efi_header_end+0x114/0x234 irq_exit+0xd0/0xd8 __handle_domain_irq+0x60/0xb0 gic_handle_irq+0x58/0xa8 el1_irq+0xb8/0x180 arch_cpu_idle+0x10/0x18 do_idle+0x1d8/0x2b0 cpu_startup_entry+0x24/0x40 secondary_start_kernel+0x1b4/0x208 Code: f9000693 a9400660 f9000020 b4000040 (f9000401) ---[ end trace bb83ceeb4c482071 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Kernel Offset: disabled CPU features: 0x00002,2300aa30 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- It's found that stmmac_xmit() and stmmac_resume() sometimes might run concurrently, possibly resulting in a race condition between mod_timer() and setup_timer(), being called by stmmac_xmit() and stmmac_resume() respectively. Since the resume() runs setup_timer() every time, it'd be safer to have del_timer_sync() in the suspend() as the counterpart. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01qed: Fix a error code in qed_hw_init()Dan Carpenter
If the qed_fw_overlay_mem_alloc() then we should return -ENOMEM instead of success. Fixes: 30d5f85895fa ("qed: FW 8.42.2.0 Add fw overlay feature") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01octeontx2-pf: Fix an IS_ERR() vs NULL bugDan Carpenter
The otx2_mbox_get_rsp() function never returns NULL, it returns error pointers on error. Fixes: 34bfe0ebedb7 ("octeontx2-pf: MTU, MAC and RX mode config support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31mlxsw: spectrum_qdisc: Fix 64-bit division error in mlxsw_sp_qdisc_tbf_rate_kbpsNathan Chancellor
When building arm32 allmodconfig: ERROR: "__aeabi_uldivmod" [drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko] undefined! rate_bytes_ps has type u64, we need to use a 64-bit division helper to avoid a build error. Fixes: a44f58c41bfb ("mlxsw: spectrum_qdisc: Support offloading of TBF Qdisc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31ionic: fix rxq comp packet type maskShannon Nelson
Be sure to include all the packet type bits in the mask. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: phy: at803x: disable vddio regulatorMichael Walle
The probe() might enable a VDDIO regulator, which needs to be disabled again before calling regulator_put(). Add a remove() function. Fixes: 2f664823a470 ("net: phy: at803x: add device tree binding") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: mii_timestamper: fix static allocation by PHY driverMichael Walle
If phydev->mii_ts is set by the PHY driver, it will always be overwritten in of_mdiobus_register_phy(). Fix it. Also make sure, that the unregister() doesn't do anything if the mii_timestamper was provided by the PHY driver. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: mdio: of: fix potential NULL pointer derefernceMichael Walle
of_find_mii_timestamper() returns NULL if no timestamper is found. Therefore, guard the unregister_mii_timestamper() calls. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-30Merge tag 'for-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core: - Add battery internal resistance temperature table support Drivers: - sc27xx: Optimize the battery resistance with measuring temperature - max17042-battery: Add MAX17055 support - bq25890-charger: Add support of BQ25892 and BQ25896 chips - misc fixes" * tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits) power: supply: ipaq_micro_battery: remove unneeded semicolon power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails power: supply: axp20x_usb_power: Only poll while offline power: supply: axp20x_usb_power: Add wakeup control power: supply: axp20x_usb_power: Allow offlining power: supply: axp20x_usb_power: Use a match structure power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static power: reset: at91-poweroff: use proper master clock register offset power: reset: at91-poweroff: introduce struct shdwc_reg_config power: supply: bq25890_charger: Add DT and I2C ids for all supported chips dt-bindings: Add new chips to bq25890 binding documentation power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips power: supply: core: Update sysfs-class-power ABI document power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity() power: supply: ltc2941-battery-gauge: fix use-after-free power: supply: max17040: Correct IRQ wake handling power: supply: axp20x_usb_power: Remove unused device_node power: supply: axp20x_ac_power: Add wakeup control power: supply: axp20x_ac_power: Allow offlining power: supply: axp20x_ac_power: Fix reporting online status ...
2020-01-30Merge tag 'devicetree-for-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...
2020-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various mptcp fixupes from Florian Westphal and Geery Uytterhoeven. 2) Don't clear the node/port GUIDs after we've assigned the correct values to them. From Leon Romanovsky. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net/core: Do not clear VF index for node/port GUIDs query mptcp: Fix undefined mptcp_handle_ipv6_mapped for modular IPV6 net: drop_monitor: Use kstrdup udp: document udp_rcv_segment special case for looped packets mptcp: MPTCP_HMAC_TEST should depend on MPTCP mptcp: Fix incorrect IPV6 dependency check Revert "MAINTAINERS: mptcp@ mailing list is moderated" mptcp: handle tcp fallback when using syn cookies mptcp: avoid a lockdep splat when mcast group was joined mptcp: fix panic on user pointer access mptcp: defer freeing of cached ext until last moment net: mvneta: fix XDP support if sw bm is used as fallback sch_choke: Use kvcalloc mptcp: Fix build with PROC_FS disabled. MAINTAINERS: mptcp@ mailing list is moderated
2020-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE updates from David Miller: 1) Fix mem region name in tx4949ide driver, from Christophe JAILLET. 2) Make drive->dn read only, it should not be changeable by users. From Dan Carpenter. 3) Several cast fixups from Krzysztof Kozlowski. There is also going to be a removal of a now unused IDE driver, but that will come via the MIPS tree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: make drive->dn read only ide: serverworks: potential overflow in svwks_set_pio_mode() cmd64x: potential buffer overflow in cmd64x_program_timings() ide: remove unneeded header include path to drivers/ide ide: qd65xx: Fix cast to pointer from integer of different size ide: ht6560b: Fix cast to pointer from integer of different size ide: remove set but not used variable 'hwif' ide: remove unnecessary touch_softlockup_watchdog ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' call ide: Use dev_get_drvdata where possible
2020-01-30ide: make drive->dn read onlyDan Carpenter
The IDE core always sets ->dn correctly so changing it is never required. Setting it to a different value than assigned by IDE core is very likely to result in data corruption (due to wrong transfer timings being set on the controller etc.) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-30Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-nextDave Airlie
A couple of OOPS fixes, fixes for TU1xx if firmware isn't available, better behaviour in the face of GPU faults, and a patch to make HD audio work again after runpm changes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4xcLF6Ahh7UYEesn-wBEksd2da+ghusBAdODMrH7Sz2A@mail.gmail.com
2020-01-29Merge tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: - Support for various new opcodes (fallocate, openat, close, statx, fadvise, madvise, openat2, non-vectored read/write, send/recv, and epoll_ctl) - Faster ring quiesce for fileset updates - Optimizations for overflow condition checking - Support for max-sized clamping - Support for probing what opcodes are supported - Support for io-wq backend sharing between "sibling" rings - Support for registering personalities - Lots of little fixes and improvements * tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-block: (64 commits) io_uring: add support for epoll_ctl(2) eventpoll: support non-blocking do_epoll_ctl() calls eventpoll: abstract out epoll_ctl() handler io_uring: fix linked command file table usage io_uring: support using a registered personality for commands io_uring: allow registering credentials io_uring: add io-wq workqueue sharing io-wq: allow grabbing existing io-wq io_uring/io-wq: don't use static creds/mm assignments io-wq: make the io_wq ref counted io_uring: fix refcounting with batched allocations at OOM io_uring: add comment for drain_next io_uring: don't attempt to copy iovec for READ/WRITE io_uring: honor IOSQE_ASYNC for linked reqs io_uring: prep req when do IOSQE_ASYNC io_uring: use labeled array init in io_op_defs io_uring: optimise sqe-to-req flags translation io_uring: remove REQ_F_IO_DRAINED io_uring: file switch work needs to get flushed on exit io_uring: hide uring_fd in ctx ...
2020-01-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf2dbd Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
2020-01-29Merge tag 'for-5.6/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix DM core's potential for q->make_request_fn NULL pointer in the unlikely case that a DM device is created without a DM table and then accessed due to upper-layer userspace code or user error. - Fix DM thin-provisioning's metadata_pre_commit_callback to not use memory after it is free'd. Also refactor code to disallow changing the thin-pool's data device once in use -- doing so guarantees smae lifetime of pool's data device relative to the pool metadata. - Fix DM space maps used by DM thinp and DM cache to avoid reuse of a already used block. This race was identified with extremely heavy snapshot use in the context of DM thin provisioning. - Fix DM raid's table status relative to an active rebuild. - Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to skcipher_request_alloc(). Also fix benbi IV constructor crash if used in authenticated mode. - Add DM crypt support for Elephant diffuser to allow for Bitlocker compatibility. - Fix DM verity target to not prefetch hash blocks for data that has already been verified. - Fix DM writecache's incorrect flush sequence during commit when in SSD mode. - Improve DM writecache's sequential write performance on SSDs. - Add DM zoned target support for zone sizes smaller than 128MiB. - Add DM multipath 'queue_if_no_path_timeout_secs' module param to allow timeout if path isn't reinstated. This allows users a kernel safety-net against IO hanging indefinitely, due to no active paths, that has historically only been provided by multipathd userspace. - Various DM code cleanups to use true/false rather than 1/0, a variable rename in dm-dust, and fix for a math error in comment for DM thin metadata's ondisk format. * tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (21 commits) dm: fix potential for q->make_request_fn NULL pointer dm writecache: improve performance of large linear writes on SSDs dm mpath: Add timeout mechanism for queue_if_no_path dm thin: change data device's flush_bio to be member of struct pool dm thin: don't allow changing data device during thin-pool reload dm thin: fix use-after-free in metadata_pre_commit_callback dm thin metadata: use pool locking at end of dm_pool_metadata_close dm writecache: fix incorrect flush sequence when doing SSD mode commit dm crypt: fix benbi IV constructor crash if used in authenticated mode dm crypt: Implement Elephant diffuser for Bitlocker compatibility dm space map common: fix to ensure new block isn't already in use dm verity: don't prefetch hash blocks for already-verified data dm crypt: fix GFP flags passed to skcipher_request_alloc() dm thin metadata: Fix trivial math error in on-disk format documentation dm thin metadata: use true/false for bool variable dm snapshot: use true/false for bool variable dm bio prison v2: use true/false for bool variable dm mpath: use true/false for bool variable dm zoned: support zone sizes smaller than 128MiB dm raid: table line rebuild status fixes ...
2020-01-29Merge tag 'linux-kselftest-5.6-rc1-kunit' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest kunit updates from Shuah Khan: "This kunit update consists of: - Support for building kunit as a module from Alan Maguire - AppArmor KUnit tests for policy unpack from Mike Salvatore" * tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: building kunit as a module breaks allmodconfig kunit: update documentation to describe module-based build kunit: allow kunit to be loaded as a module kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds kunit: allow kunit tests to be loaded as a module kunit: hide unexported try-catch interface in try-catch-impl.h kunit: move string-stream.h to lib/kunit apparmor: add AppArmor KUnit tests for policy unpack
2020-01-29Merge tag 'y2038-drivers-for-v5.6-signed' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "Core, driver and file system changes These are updates to device drivers and file systems that for some reason or another were not included in the kernel in the previous y2038 series. I've gone through all users of time_t again to make sure the kernel is in a long-term maintainable state, replacing all remaining references to time_t with safe alternatives. Some related parts of the series were picked up into the nfsd, xfs, alsa and v4l2 trees. A final set of patches in linux-mm removes the now unused time_t/timeval/timespec types and helper functions after all five branches are merged for linux-5.6, ensuring that no new users get merged. As a result, linux-5.6, or my backport of the patches to 5.4 [1], should be the first release that can serve as a base for a 32-bit system designed to run beyond year 2038, with a few remaining caveats: - All user space must be compiled with a 64-bit time_t, which will be supported in the coming musl-1.2 and glibc-2.32 releases, along with installed kernel headers from linux-5.6 or higher. - Applications that use the system call interfaces directly need to be ported to use the time64 syscalls added in linux-5.1 in place of the existing system calls. This impacts most users of futex() and seccomp() as well as programming languages that have their own runtime environment not based on libc. - Applications that use a private copy of kernel uapi header files or their contents may need to update to the linux-5.6 version, in particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h, linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h. - A few remaining interfaces cannot be changed to pass a 64-bit time_t in a compatible way, so they must be configured to use CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit timestamps. Most importantly this impacts all users of 'struct input_event'. - All y2038 problems that are present on 64-bit machines also apply to 32-bit machines. In particular this affects file systems with on-disk timestamps using signed 32-bit seconds: ext4 with ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs" [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame * tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits) Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC" y2038: sh: remove timeval/timespec usage from headers y2038: sparc: remove use of struct timex y2038: rename itimerval to __kernel_old_itimerval y2038: remove obsolete jiffies conversion functions nfs: fscache: use timespec64 in inode auxdata nfs: fix timstamp debug prints nfs: use time64_t internally sunrpc: convert to time64_t for expiry drm/etnaviv: avoid deprecated timespec drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC drm/msm: avoid using 'timespec' hfs/hfsplus: use 64-bit inode timestamps hostfs: pass 64-bit timestamps to/from user space packet: clarify timestamp overflow tsacct: add 64-bit btime field acct: stop using get_seconds() um: ubd: use 64-bit time_t where possible xtensa: ISS: avoid struct timeval dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD ...
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-29Merge tag 'driver-core-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of changes for 5.6-rc1 for the driver core and some firmware subsystem changes. Included in here are: - device.h splitup like you asked for months ago - devtmpfs minor cleanups - firmware core minor changes - debugfs fix for lockdown mode - kernfs cleanup fix - cpu topology minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits) firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS devtmpfs: factor out common tail of devtmpfs_{create,delete}_node devtmpfs: initify a bit devtmpfs: simplify initialization of mount_dev devtmpfs: factor out setup part of devtmpfsd() devtmpfs: fix theoretical stale pointer deref in devtmpfsd() driver core: platform: fix u32 greater or equal to zero comparison cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree debugfs: Return -EPERM when locked down driver core: Print device when resources present in really_probe() driver core: Fix test_async_driver_probe if NUMA is disabled driver core: platform: Prevent resouce overflow from causing infinite loops fs/kernfs/dir.c: Clean code by removing always true condition component: do not dereference opaque pointer in debugfs drivers/component: remove modular code debugfs: Fix warnings when building documentation device.h: move 'struct driver' stuff out to device/driver.h device.h: move 'struct class' stuff out to device/class.h device.h: move 'struct bus' stuff out to device/bus.h device.h: move dev_printk()-like functions to dev_printk.h ...
2020-01-29Merge tag 'staging-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the big staging/iio driver patches for 5.6-rc1 Included in here are: - lots of new IIO drivers and updates for that subsystem - the usual huge quantity of minor cleanups for staging drivers - removal of the following staging drivers: - isdn/avm - isdn/gigaset - isdn/hysdn - octeon-usb - octeon ethernet Overall we deleted far more lines than we added, removing over 40k of old and obsolete driver code. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits) staging: most: usb: check for NULL device staging: next: configfs: fix release link staging: most: core: fix logging messages staging: most: core: remove container struct staging: most: remove struct device core driver staging: most: core: drop device reference staging: most: remove device from interface structure staging: comedi: drivers: fix spelling mistake "to" -> "too" staging: exfat: remove fs_func struct. staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq() staging: wilc1000: return zero on success and non-zero on function failure staging: axis-fifo: replace spinlock with mutex staging: wilc1000: remove unused code prior to throughput enhancement in SPI staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name staging: wilc1000: move firmware API struct's to separate header file staging: wilc1000: remove use of infinite loop conditions staging: kpc2000: rename variables with kpc namespace staging: vt6656: Remove memory buffer from vnt_download_firmware. staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED. staging: vt6656: Use vnt_rx_tail struct for tail variables. ...
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-29Merge tag 'pinctrl-v5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
2020-01-29Merge tag 'gpio-v5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.6 kernel cycle. This is a pretty calm cycle so far, nothing special going on really. Some more changes will come in from the irqchip and pin control trees. I also deleted an orphan include file for FMC that was dangling since subsystem was removed. Core changes: - Document the usecases for the kernelspace vs userspace handling of GPIOs. - Handle MSI (message signalled interrupts) properly in the core hierarchical irqdomain code. - Fix a rare race condition while initializing the descriptor array. New drivers: - Xylon LogiCVC GPIO driver. - WDC934x GPIO controller driver. Driver improvements: - Implemented suspend/resume in the Tegra driver. - MPC8xx edge detection fixup. - Properly convert ThunderX to use hierarchical irqdomain with GPIOLIB_IRQCHIP on top of the revert of the previous buggy switchover. This time it works (hopefully). Misc: - Drop a FMC remnant file <linux/ipmi-fru.h> - A slew of fixes" * tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits) MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer gpiolib: hold gpio devices lock until ->descs array is initialised gpio: aspeed-sgpio: fixed typos gpio: mvebu: clear irq in edge cause register before unmask edge irq gpiolib: Lower verbosity when allocating hierarchy irq gpiolib: Remove duplicated function gpio_do_set_config() gpio: Fix the no return statement warning gpio: wcd934x: Add support to wcd934x gpio controller gpiolib: remove set but not used variable 'config' gpio: vx855: fixed a typo gpio: mockup: sort headers alphabetically gpio: mockup: update the license tag gpio: Remove the unused flags gpiolib: Set lockdep class for hierarchical irq domains gpio: thunderx: Switch to GPIOLIB_IRQCHIP gpiolib: Add the support for the msi parent domain gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg gpio: Add use guidance documentation dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: altera: change to platform_get_irq_optional to avoid false-positive error ...
2020-01-29net: mvneta: fix XDP support if sw bm is used as fallbackLorenzo Bianconi
In order to fix XDP support if sw buffer management is used as fallback for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header to 4-byte boundary. Fix rx_offset_correction initialization if mvneta_bm_port_init fails in mvneta_resume routine Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missingBen Skeggs
Without relaxing this requirement, TU10x boards will fail to load without an updated linux-firmware, and TU11x will completely fail to load because FW isn't available yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau/acr: return error when registering LSF if ACR not supportedBen Skeggs
This fixes an oops on TU11x GPUs where SEC2 attempts to register its falcon, and triggers a NULL-pointer deref because ACR isn't yet supported. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau/disp/gv100-: not all channel types support reporting error codesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau/disp/nv50-: prevent oops when no channel method map providedBen Skeggs
The implementations for most channel types contains a map of methods to priv registers in order to provide debugging info when a disp exception has been raised. This info is missing from the implementation of PIO channels as they're rather simplistic already, however, if an exception is raised by one of them, we'd end up triggering a NULL-pointer deref. Not ideal... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299 Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau: support synchronous pushbuf submissionBen Skeggs
This is useful for debugging GPU hangs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau: signal pending fences when channel has been killedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau: reject attempts to submit to dead channelsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau: zero vma pointer even if we only unreference it rather than freeBen Skeggs
I'm not sure this affects anything, but best be safe. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-29drm/nouveau: Add HD-audio component notifier supportTakashi Iwai
This patch adds the support for the notification of HD-audio hotplug via the already existing drm_audio_component framework. This allows us more reliable hotplug notification and ELD transfer without accessing HD-audio bus; it's more efficient, and more importantly, it works without waking up the runtime PM. The implementation is rather simplistic: nouveau driver provides the get_eld ops for HD-audio, and it notifies the audio hotplug via pin_eld_notify callback upon each nv50_audio_enable() and _disable() call. As the HD-audio pin assignment seems corresponding to the CRTC, the crtc->index number is passed directly as the zero-based port number. The bind and unbind callbacks handle the device-link so that it assures the PM call order. Link: https://lore.kernel.org/r/20190722143815.7339-3-tiwai@suse.de Reviewed-by: Lyude Paul <lyude@redhat.com> Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-28Merge tag 'thermal-v5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Depromote debug print on the db8500 platform (Linus Walleij) - Fix compilation warning when compiling with make W=1 (Amit Kucheria) - Code cleanup and refactoring, regmap conversion and add hwmon support on Qoriq (Andrey Smirnov) - Add an idle injection cpu cooling device and its documentation, rename the cpu_cooling device to cpufreq_cooling device (Daniel Lezcano) - Convert unexported functions to static, add the __init annotation in the thermal-of code and remove the pointless wrapper functions (Daniel Lezcano) - Fix register offset for Armada XP and register reset bit initialization (Zak Hays) - Enable hwmon on the rockchip (Stefan Schaeckeler) - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform and their device tree bindings, followed by a fix for the ths number and the sparse warnings (Yangtao Li) - Code cleansup for the sun8i and hwmon support (Yangtao Li) - Silent some messages which are misleading given the changes made in the previous version on generic-adc (Martin Blumenstingl) - Rename exynos to Exynos (Krzysztof Kozlowski) - Add the bcm2711 thermal driver with the device tree bindings (Stefan Wahren) - Use usleep_range() instead of udelay() as the call is always done in a sleep-able context (Geert Uytterhoeven) - Do code cleanup and re-organization to set the scene for a new process for the brcmstb (Florian Fainelli) - Fix bindings check issues on brcm (Stefan Wahren) - Add Jasper Lake support on int340x (Nivedita Swaminathan) - Add Comet Lake support on intel pch (Gayatri Kammela) - Fix unmatched pci_release_region() on x86 (Chuhong Yuan) - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund) - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is called with the of-node is missing (Peter Mamonov) - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal Paillet) * tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits) thermal: stm32: Fix low threshold interrupt flood thermal: stm32: Improve temperature computing thermal: stm32: Handle multiple trip points thermal: stm32: Disable interrupts at probe thermal: stm32: Rework sensor mode management thermal: stm32: Fix icifr register name thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing thermal: rcar_gen3_thermal: Remove temperature bound thermal: rcar_thermal: Remove temperature bound thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support thermal: intel: Fix unmatched pci_release_region thermal: int340x: processor_thermal: Add Jasper Lake support dt-bindings: brcm,avs-ro-thermal: Fix binding check issues thermal: brcmstb_thermal: Register different ops per process thermal: brcmstb_thermal: Restructure interrupt registration thermal: brcmstb_thermal: Add 16nm process thermal parameters dt-bindings: thermal: Define BCM7216 thermal sensor compatible thermal: brcmstb_thermal: Prepare to support a different process thermal: brcmstb_thermal: Do not use DT coefficients thermal: rcar_thermal: Use usleep_range() instead of udelay() ...
2020-01-28Merge tag 'sound-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As the diffstat shows we've had again a lot of works done for this cycle: the majority of changes are the continued componentization and code refactoring in ASoC, the tree-wide PCM API updates and cleanups and SOF updates while a few ASoC driver updates are seen, too. Here we go, some highlights: Core: - Finally y2038 support landed to ALSA ABI; some ioctls have been extended and lots of tricks were applied - Applying the new managed PCM buffer API to all drivers; the API itself was already merged in 5.5 - The already deprecated dimension support in ALSA control API is dropped completely now - Verification of ALSA control elements to catch API misuses ASoC: - Further code refactorings and moving things to the component level - Lots of updates and improvements on SOF / Intel drivers; now including common HDMI driver and SoundWire support - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015 and RT1308 HD-audio: - Improved ring-buffer communications using waitqueue - Drop the superfluous buffer preallocation on x86 Others: - Many code cleanups, mostly constifications over the whole tree - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix - FireWire: code refactoring for oxfw and dice drivers" * tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits) ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82 ALSA: hda: Add Clevo W65_67SB the power_save blacklist ASoC: soc-core: remove null_snd_soc_ops ASoC: soc-pcm: add soc_rtd_trigger() ASoC: soc-pcm: add soc_rtd_hw_free() ASoC: soc-pcm: add soc_rtd_hw_params() ASoC: soc-pcm: add soc_rtd_prepare() ASoC: soc-pcm: add soc_rtd_shutdown() ASoC: soc-pcm: add soc_rtd_startup() ASoC: rt1015: add rt1015 amplifier driver ASoC: madera: Correct some kernel doc ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug ASoC: madera: Correct DMIC only input hook ups ALSA: cs46xx: fix spelling mistake "to" -> "too" ALSA: hda - Add docking station support for Lenovo Thinkpad T420s ASoC: Add MediaTek MT6660 Speaker Amp Driver ASoC: dt-bindings: rt5645: add suppliers ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double() ASoC: dapm: add snd_soc_dapm_put_enum_double_locked ...
generated by cgit (git 2.34.1) at 2024-06-10 06:48:46 +0000