summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-08net: vxlan: lwt: Fix vxlan local traffic.pravin shelar
vxlan driver has bypass for local vxlan traffic, but that depends on information about all VNIs on local system in vxlan driver. This is not available in case of LWT. Therefore following patch disable encap bypass for LWT vxlan traffic. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Reported-by: Jakub Libosvar <jlibosva@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08net: vxlan: lwt: Use source ip address during route lookup.pravin shelar
LWT user can specify destination as well as source ip address for given tunnel endpoint. But vxlan is ignoring given source ip address. Following patch uses both ip address to route the tunnel packet. This consistent with other LWT implementations, like GENEVE and GRE. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08net/ethernet: tundra: fix dump_eth_one warning in tsi108_ethPaul Gortmaker
The call site for this function appears as: #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif ...leading to the following warning for !DEBUG builds: drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function] static void dump_eth_one(struct net_device *dev) ^ ...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig Put the function definition under the same #ifdef as the call site to avoid the warning. Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Add missing DCB rollback in error pathIdo Schimmel
We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but I missed its rollback in the error path of port creation, so add it. Fixes: f00817df2b42 ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Do not override PAUSE settingsIdo Schimmel
The PFCC register is used to configure both PAUSE and PFC frames. Therefore, when PFC frames are disabled we must make sure we don't mistakenly also disable PAUSE frames (which might be enabled). Fix this by packing the PFCC register with the current PAUSE settings. Note that this register is also accessed via ethtool ops, but there we are guaranteed to have PFC disabled. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Do not assume PAUSE frames are disabledIdo Schimmel
When ieee_setpfc() gets called, PAUSE frames are not necessarily disabled on the port. Check if PAUSE frames are disabled or enabled and configure the port's headroom buffer accordingly. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: macb: Correct CAPS maskHarini Katakam
USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a702197 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Harini Katakam <harinik@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06Merge tag 'mac80211-for-davem-2016-08-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== First set of fixes for the current cycle: * fix 80+80 bandwidth warning * fix powersave with mac80211 TXQ implementation * use correct way to free SKBs from multicast buffering * mesh: fix operation ordering to work with all drivers * mesh: end service period even when peer goes away * mesh: correct HT opmode validity checks * pass hw pointer from mac80211 to driver in TPT method, fixing a bug (in a bit the wrong way, but that's what we have right now) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: dsa: b53: Add missing ULL suffix for 64-bit constantGeert Uytterhoeven
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85c6fbed8f ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: arc_emac: add missing of_node_put() in arc_emac_probe()Wei Yongjun
commit a94efbd7cc45 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-05mac80211: Add ieee80211_hw pointer to get_expected_throughputMaxim Altshul
The variable is added to allow the driver an easy access to it's own hw->priv when the op is invoked. This fixes a crash in wlcore because it was relying on a station pointer that wasn't initialized yet. It's the wrong way to fix the crash, but it solves the problem for now and it does make sense to have the hw pointer here. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> [rewrite commit message, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-03qlcnic: Update version to 5.3.65Manish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix napi budget alterationManish Chopra
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix data structure corruption in async mbx command handlingManish Chopra
This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Report the correct number of RSS queues through tg3_get_rxnfcSiva Reddy Kallam
This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Fix for diasllow rx coalescing time to be 0Satish Baddipadige
When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03net: xgene: fix maybe-uninitialized variableArnd Bergmann
Building with -Wmaybe-uninitialized shows a potential use of an uninitialized variable: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] Although the compiler correctly identified this based on the function, the current code is still safe as long dev->of_node is non-NULL for the case of CONFIG_ACPI=n, which is currently the case. The warning is now disabled by default, but still appears when building with W=1, and other build test tools should be able to detect it as well. Adding an #else clause here makes the code more robust and makes it clear to the compiler that this cannot happen. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8089a96f601b ("drivers: net: xgene: Add backward compatibility") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several cases of missing of_node_put() calls in various networking drivers. From Peter Chen. 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval Mintz. 3) Unbalanced locking in TIPC error handling, from Wei Yongjun. 4) Fix lockups in CPDMA driver, from Grygorii Strashko. 5) More MACSEC refcount et al fixes, from Sabrina Dubroca. 6) Fix MAC address setting in r8169 during runtime suspend, from Chun-Hao Lin. 7) Various printf format specifier fixes, from Heinrich Schuchardt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) qed: Fail driver load in 100g MSI mode. ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle ethernet: altera: add missing of_node_put 8139too: fix system hang when there is a tx timeout event. qed: Fix error return code in qed_resc_alloc() net: qlcnic: avoid superfluous assignement dsa: b53: remove redundant if ...
2016-08-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-02Merge tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull Ceph updates from Ilya Dryomov: "The highlights are: - RADOS namespace support in libceph and CephFS (Zheng Yan and myself). The stopgaps added in 4.5 to deny access to inodes in namespaces are removed and CEPH_FEATURE_FS_FILE_LAYOUT_V2 feature bit is now fully supported - A large rework of the MDS cap flushing code (Zheng Yan) - Handle some of ->d_revalidate() in RCU mode (Jeff Layton). We were overly pessimistic before, bailing at the first sight of LOOKUP_RCU On top of that we've got a few CephFS bug fixes, a couple of cleanups and Arnd's workaround for a weird genksyms issue" * tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-client: (34 commits) ceph: fix symbol versioning for ceph_monc_do_statfs ceph: Correctly return NXIO errors from ceph_llseek ceph: Mark the file cache as unreclaimable ceph: optimize cap flush waiting ceph: cleanup ceph_flush_snaps() ceph: kick cap flushes before sending other cap message ceph: introduce an inode flag to indicates if snapflush is needed ceph: avoid sending duplicated cap flush message ceph: unify cap flush and snapcap flush ceph: use list instead of rbtree to track cap flushes ceph: update types of some local varibles ceph: include 'follows' of pending snapflush in cap reconnect message ceph: update cap reconnect message to version 3 ceph: mount non-default filesystem by name libceph: fsmap.user subscription support ceph: handle LOOKUP_RCU in ceph_d_revalidate ceph: allow dentry_lease_is_valid to work under RCU walk ceph: clear d_fsinfo pointer under d_lock ceph: remove ceph_mdsc_lease_release ceph: don't use ->d_time ...
2016-08-02w1:omap_hdq: fix regressionH. Nikolaus Schaller
Commit e93762bbf681 ("w1: masters: omap_hdq: add support for 1-wire mode") added a statement to clear the hdq_irqstatus flags in hdq_read_byte(). If the hdq reading process is scheduled slowly or interrupts are disabled for a while the hardware read activity might already be finished on entry of hdq_read_byte(). And hdq_isr() already has set the hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel. This means there is no need to wait and the hdq_read_byte() can just read the byte from the hdq controller. By resetting hdq_irqstatus to 0 the read process is forced to be always waiting again (because the if statement always succeeds) but the hardware will not issue another RXCOMPLETE interrupt. This results in a false timeout. After such a situation the hdq bus hangs. Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.com Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02w1: add helper macro module_w1_familyAndrew F. Davis
The helper macro module_w1_family can be used in module drivers that only register a w1 driver in their module init functions. Add this macro and use it in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-2-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02w1: remove need for ida and use PLATFORM_DEVID_AUTOAndrew F. Davis
PLATFORM_DEVID_AUTO can be used to have the platform core assign a unique ID instead of manually creating one with IDA. Do this in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-1-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/switches: add driver for IDT gen3 switchesAlexandre Bounine
Add RapidIO switch driver for IDT Gen3 switch devices: RXS1632 and RXS2448. [alexandre.bounine@idt.com: fixup for original driver patch] Link: http://lkml.kernel.org/r/1469137596-18241-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-14-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: modify for rev.3 specification changesAlexandre Bounine
Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [alexandre.bounine@idt.com: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: change inbound window size type to u64Alexandre Bounine
Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/idt_gen2: fix locking warningAlexandre Bounine
Fix lockdep warning during device probing: move sysfs initialization out of code protected by a spin lock. Link: http://lkml.kernel.org/r/1469125134-16523-10-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix error handling in mbox request/release functionsAlexandre Bounine
Add checking for error code returned by HW-specific mbox open routines. Ensure that resources are properly release if failed. This patch is applicable to kernel versions starting from v2.6.15. Link: http://lkml.kernel.org/r/1469125134-16523-9-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: advance queue processing from transfer submit callAlexandre Bounine
Add advancing transfer queue immediately from transfer submit call. DMA performance improvement: This will start transfer without waiting for 'issue_pending' command if there is no DMA transfer in progress. Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add messaging mbox selector parameterAlexandre Bounine
Add module parameter to allow load time configuration of available RapidIO messaging mailboxes (MBOX1 - MBOX4). Having a messaging MBOX selector mask allows to define which MBOXes are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add PCIe MRRS override parameterAlexandre Bounine
Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow users to override configuration register value set during PCIe bus initialization. Performance of Tsi721 device as PCIe bus master can be improved if MRRS is set to its maximum value (4096 bytes). Some platforms have limitations for supported MRRS and therefore the default value should be preserved, unless it is known that given platform supports full set of MRRS values defined by PCI Express specification. Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: add channel mask and queue size parametersAlexandre Bounine
Add module parameters to allow load time configuration of DMA channels. Depending on application, performance of DMA data transfers can benefit from adjusted sizes of buffer descriptor ring and/or transaction requests queue. Having HW DMA channel selector mask allows to define which channels (from seven available) are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix return value description for dma_prep functionsAlexandre Bounine
Update return value description for rio_dma_prep_... functions to include error-valued pointer that can be returned by HW mport device drivers. Return values from these functions must be checked using IS_ERR_OR_NULL macro. This patch is applicable to kernel versions starting from v4.6-rc1. Link: http://lkml.kernel.org/r/1469125134-16523-4-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: remove unnecessary 0x prefixes before %pa extension usesJoe Perches
Patch series "RapidIO subsystem updates". This set of patches contains RapidIO subsystem fixes and updates that have been made since kernel v4.6. The most significant update brings changes related to the latest revision of RapidIO specification (rev.3.x) and introduction of next generation of RapidIO switches by IDT (RXS1632 and RXS2448). This patch (of 13): This is RapidIO part of the original patch submitted by Joe Perches. (see: https://lkml.org/lkml/2016/3/5/19) Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pa uses have been output with a 0x prefix. These 0x prefixes in the formats are unnecessary. Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: add RapidIO channelized messaging driverAlexandre Bounine
Add channelized messaging driver to support native RapidIO messaging exchange between multiple senders/recipients on devices that use kernel RapidIO subsystem services. This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes messaging capabilities of RapidIO endpoint devices (mports) directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. This char mode device driver allows user-space applications to setup messaging communication channels using single shared RapidIO messaging mailbox. By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by RIONET Ethernet emulation driver). [weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()] Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02firmware: support loading into a pre-allocated bufferStephen Boyd
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02firmware: provide infrastructure to make fw caching optionalVikram Mulukutla
Some low memory systems with complex peripherals cannot afford to have the relatively large firmware images taking up valuable memory during suspend and resume. Change the internal implementation of firmware_class to disallow caching based on a configurable option. In the near future, variants of request_firmware will take advantage of this feature. Link: http://lkml.kernel.org/r/20160607164741.31849-3-stephen.boyd@linaro.org [stephen.boyd@linaro.org: Drop firmware_desc design and use flags] Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02firmware: consolidate kmap/read/write logicStephen Boyd
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This design creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. This patch sets adds support to the request firmware API to load the firmware directly into a pre-allocated buffer, skipping the intermediate copying step and alleviating memory pressure during firmware loading. The drawback is that we can't use the firmware caching feature because the memory for the firmware cache is not managed by the firmware layer. This patch (of 3): We use similar structured code to read and write the kmapped firmware pages. The only difference is read copies from the kmap region and write copies to it. Consolidate this into one function to reduce duplication. Link: http://lkml.kernel.org/r/20160607164741.31849-2-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02fbdev/bfin_adv7393fb: move DRIVER_NAME before its first useBorislav Petkov
Move the DRIVER_NAME macro definition before the first usage site and fix build error. Link: http://lkml.kernel.org/r/20160801163937.GA28119@nazgul.tnic Signed-off-by: Borislav Petkov <bp@suse.de> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02dynamic_debug: only add header when usedLuis de Bethencourt
kernel.h header doesn't directly use dynamic debug, instead we can include it in module.c (which used it via kernel.h). printk.h only uses it if CONFIG_DYNAMIC_DEBUG is on, changing the inclusion to only happen in that case. Link: http://lkml.kernel.org/r/1468429793-16917-1-git-send-email-luisbg@osg.samsung.com [luisbg@osg.samsung.com: include dynamic_debug.h in drb_int.h] Link: http://lkml.kernel.org/r/1468447828-18558-2-git-send-email-luisbg@osg.samsung.com Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'drm-psr-fixes-for-v4.8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull i915 drm fixes from Dave Airlie: "These are the two fixes from Ville for the bug you are seeing on your HSW laptop. They pretty much disable PSR in some cases where the panel reports a setup time that would cause issues, like you seem to have" * tag 'drm-psr-fixes-for-v4.8' of git://people.freedesktop.org/~airlied/linux: drm/i915: Check PSR setup time vs. vblank length drm/dp: Add drm_dp_psr_setup_time()
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02memstick: don't allocate unused major for ms_blockNeilBrown
When alloc_disk(0) is used the ->major number is completely ignored. All devices are allocated with a major of BLOCK_EXT_MAJOR. So remove registration and deregistration of 'major'. Link: http://lkml.kernel.org/r/20160602064318.4403.49955.stgit@noble Signed-off-by: NeilBrown <neilb@suse.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-03drm/i915: Check PSR setup time vs. vblank lengthVille Syrjälä
Bspec says: "Restriction : SRD must not be enabled when the PSR Setup time from DPCD 00071h is greater than the time for vertical blank minus one line." Let's check for that and disallow PSR if we exceed the limit. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-03drm/dp: Add drm_dp_psr_setup_time()Ville Syrjälä
Add a small helper to parse the PSR setup time from the DPCD PSR capabilities and return the value in microseconds. v2: Don't waste so many bytes on the psr_setup_time_us[] table Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-02Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-08-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: - some cleanup for the hugetlbfs pte/pmd conversion functions - the code to check for the minimum CPU type is converted from assembler to C and an informational message is added in case the CPU is not new enough to run the kernel - bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace/jprobes: Fix conflict between jprobes and function graph tracing s390: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO s390/zcrypt: fix possible memory leak in ap_module_init() s390/numa: only set possible nodes within node_possible_map s390/als: fix compile with gcov enabled s390/facilities: do not generate DWORDS define anymore s390/als: print missing facilities on facility mismatch s390/als: print machine type on facility mismatch s390/als: convert architecture level set code to C s390/sclp: move uninitialized data to data section s390/zcrypt: Fix zcrypt suspend/resume behavior s390/cio: fix premature wakeup during chp configure s390/cio: convert cfg_lock mutex to spinlock s390/mm: clean up pte/pmd encoding
2016-08-01qed: Fail driver load in 100g MSI mode.Sudarsana Reddy Kalluru
100g support is not available in MSI mode. Failing the driver load in this scenario. Please consider applying this to `net'. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-06 15:58:05 +0000