summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-11-29net: pcs: altera-tse: remove unnecessary register definitionsMaxime Chevallier
remove unused register definitions, left from the split with the altera-tse mac driver. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29net: pcs: altera-tse: don't set the speed for 1000BaseXMaxime Chevallier
When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode. In that mode, we don't need to set the speed since it's always 1000Mbps. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29net: pcs: altera-tse: use read_poll_timeout to wait for resetMaxime Chevallier
Software resets on the TSE PCS don't clear registers, but rather reset all internal state machines regarding AN, comma detection and encoding/decoding. Use read_poll_timeout to wait for the reset to clear instead of manually polling the register. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge tag 'net-6.1-rc8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and wifi. Current release - new code bugs: - eth: mlx5e: - use kvfree() in mlx5e_accel_fs_tcp_create() - MACsec, fix RX data path 16 RX security channel limit - MACsec, fix memory leak when MACsec device is deleted - MACsec, fix update Rx secure channel active field - MACsec, fix add Rx security association (SA) rule memory leak Previous releases - regressions: - wifi: cfg80211: don't allow multi-BSSID in S1G - stmmac: set MAC's flow control register to reflect current settings - eth: mlx5: - E-switch, fix duplicate lag creation - fix use-after-free when reverting termination table Previous releases - always broken: - ipv4: fix route deletion when nexthop info is not specified - bpf: fix a local storage BPF map bug where the value's spin lock field can get initialized incorrectly - tipc: re-fetch skb cb after tipc_msg_validate - wifi: wilc1000: fix Information Element parsing - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE - sctp: fix memory leak in sctp_stream_outq_migrate() - can: can327: fix potential skb leak when netdev is down - can: add number of missing netdev freeing on error paths - aquantia: do not purge addresses when setting the number of rings - wwan: iosm: - fix incorrect skb length leading to truncated packet - fix crash in peek throughput test due to skb UAF" * tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed MAINTAINERS: Update maintainer list for chelsio drivers ionic: update MAINTAINERS entry sctp: fix memory leak in sctp_stream_outq_migrate() packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE net/mlx5: Lag, Fix for loop when checking lag Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path" net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions net: tun: Fix use-after-free in tun_detach() net: mdiobus: fix unbalanced node reference count net: hsr: Fix potential use-after-free tipc: re-fetch skb cb after tipc_msg_validate mptcp: fix sleep in atomic at close time mptcp: don't orphan ssk in mptcp_close() dsa: lan9303: Correct stat name ipv4: Fix route deletion when nexthop info is not specified net: wwan: iosm: fix incorrect skb length net: wwan: iosm: fix crash in peek throughput test net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type net: wwan: iosm: fix kernel test robot reported error ...
2022-11-29net: ethernet: renesas: ravb: Fix promiscuous mode after system resumedYoshihiro Shimoda
After system resumed on some environment board, the promiscuous mode is disabled because the SoC turned off. So, call ravb_set_rx_mode() in the ravb_resume() to fix the issue. Reported-by: Tho Vu <tho.vu.wh@renesas.com> Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29net/mlx5: Lag, Fix for loop when checking lagChris Mi
The cited commit adds a for loop to check if each port supports lag or not. But dev is not initialized correctly. Fix it by initializing dev for each iteration. Fixes: e87c6a832f88 ("net/mlx5: E-switch, Fix duplicate lag creation") Signed-off-by: Chris Mi <cmi@nvidia.com> Reported-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"Saeed Mahameed
This reverts commit c0071be0e16c461680d87b763ba1ee5e46548fde. The cited commit removed the validity checks which initialized the window_sz and never removed the use of the now uninitialized variable, so now we are left with wrong value in the window size and the following clang warning: [-Wuninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45: warning: variable 'window_sz' is uninitialized when used here MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz); Revet at this time to address the clang issue due to lack of time to test the proper solution. Fixes: c0071be0e16c ("net/mlx5e: MACsec, remove replay window size limitation in offload path") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reported-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221129093006.378840-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29nfp: ethtool: support reporting link modesYu Xiao
Add support for reporting link modes, including `Supported link modes` and `Advertised link modes`, via ethtool $DEV. A new command `SPCODE_READ_MEDIA` is added to read info from management firmware. Also, the mapping table `nfp_eth_media_table` associates the link modes between NFP and kernel. Both of them help to support this ability. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20221125113030.141642-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: microchip: vcap: Implement w32beHoratiu Vultur
On lan966x the layout of the vcap memory is different than on sparx5. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: Add port keyset config and callback interfaceHoratiu Vultur
Implement vcap_operations and enable default port keyset configuration for each port. Now it is possible actually write/read/move entries in the VCAP. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: add tc matchall goto actionHoratiu Vultur
Extend matchall with action goto. This is needed to enable the lookup in the VCAP. It is needed to connect chain 0 to a chain that is recognized by the HW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: add tc flower support for VCAP APIHoratiu Vultur
Currently the only supported action is ACTION_TRAP and the only dissector is ETH_ADDRS. Others will be added in future patches. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: add vcap registersHoratiu Vultur
Add registers used to access vcap controller. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: Add is2 vcap model to vcap API.Horatiu Vultur
This provides the lan966x is2 model and adds it to the vcap control instance that will be provided to the vcap API. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: lan966x: Add initial VCAPHoratiu Vultur
When lan966x driver is initialized, initialize also the VCAP module for lan966x. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: microchip: vcap: Extend vcap with lan966xHoratiu Vultur
Add the keysets, keys, actionsets and actions used by lan966x in IS2. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: microchip: vcap: Merge the vcap_ag_api_kunit.h into vcap_ag_api.hHoratiu Vultur
Currently there are 2 files that contain the keyfields, keys, actionfields and actions. First file is used by the kunit while the second one is used by VCAP api. The header file that is used by kunit is just a super set of the of the header file used by VCAP api. Therefore not to have duplicate information in different files which is also harder to maintain, create a single file that is used both by API and by kunit. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functionsShang XiaoJing
rhashtable_lookup_fast() returns NULL when failed instead of error pointer. Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting") Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221125012751.23249-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: tun: Fix use-after-free in tun_detach()Shigeru Yoshida
syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. Fixes: 83c1f36f9880 ("tun: send netlink notification when the device is modified") Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1] Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: ethernet: mtk_wed: add reset to tx_ring_setup callbackLorenzo Bianconi
Introduce reset parameter to mtk_wed_tx_ring_setup signature. This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: ethernet: mtk_wed: add mtk_wed_rx_reset routineLorenzo Bianconi
Introduce mtk_wed_rx_reset routine in order to reset rx DMA for Wireless Ethernet Dispatcher available on MT7986 SoC. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: ethernet: mtk_wed: update mtk_wed_stopLorenzo Bianconi
Update mtk_wed_stop routine and rename old mtk_wed_stop() to mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: ethernet: mtk_wed: move MTK_WDMA_RESET_IDX_TX configuration in ↵Lorenzo Bianconi
mtk_wdma_tx_reset Remove duplicated code. Increase poll timeout to 10ms in order to be aligned with vendor sdk. This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: ethernet: mtk_wed: return status value in mtk_wdma_rx_resetLorenzo Bianconi
Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine. Increase poll timeout to 10ms in order to be aligned with vendor sdk. This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: mvpp2: Consider NVMEM cells as possible MAC address sourceMiquel Raynal
The ONIE standard describes the organization of tlv (type-length-value) arrays commonly stored within NVMEM devices on common networking hardware. Several drivers already make use of NVMEM cells for purposes like retrieving a default MAC address provided by the manufacturer. What made ONIE tables unusable so far was the fact that the information where "dynamically" located within the table depending on the manufacturer wishes, while Linux NVMEM support only allowed statically defined NVMEM cells. Fortunately, this limitation was eventually tackled with the introduction of discoverable cells through the use of NVMEM layouts, making it possible to extract and consistently use the content of tables like ONIE's tlv arrays. Parsing this table at runtime in order to get various information is now possible. So, because many Marvell networking switches already follow this standard, let's consider using NVMEM cells as a new valid source of information when looking for a base MAC address, which is one of the primary uses of these new fields. Indeed, manufacturers following the ONIE standard are encouraged to provide a default MAC address there, so let's eventually use it if no other MAC address has been found using the existing methods. Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29net: marvell: prestera: Avoid unnecessary DT lookupsMiquel Raynal
This driver fist makes an expensive DT lookup to retrieve its DT node (this is a PCI driver) in order to later search for the base-mac-provider property. This property has no reality upstream and this code should not have been accepted like this in the first place. Instead, there is a proper nvmem interface that should be used. Let's avoid these extra lookups and rely on the nvmem internal logic. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-28net: mdiobus: fix unbalanced node reference countYang Yingliang
I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28dsa: lan9303: Correct stat nameJerry Ray
This patch changes the reported ethtool statistics for the lan9303 family of parts covered by this driver. The TxUnderRun statistic label is renamed to RxShort to accurately reflect what stat the device is reporting. I did not reorder the statistics as that might cause problems with existing user code that are expecting the stats at a certain offset. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28Merge tag 'wireless-2022-11-28' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.1 Third, and hopefully final, set of fixes for v6.1. We are marking the rsi driver as orphan, have some Information Element parsing fixes to wilc1000 driver and three small fixes to the stack. * tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration wifi: cfg80211: don't allow multi-BSSID in S1G wifi: cfg80211: fix buffer overflow in elem comparison wifi: wilc1000: validate number of channels wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute wifi: wilc1000: validate pairwise and authentication suite offsets MAINTAINERS: mark rsi wifi driver as orphan ==================== Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28Revert "net: stmmac: use sysfs_streq() instead of strncmp()"Vladimir Oltean
This reverts commit f72cd76b05ea1ce9258484e8127932d0ea928f22. This patch is so broken, it hurts. Apparently no one reviewed it and it passed the build testing (because the code was compiled out), but it was obviously never compile-tested, since it produces the following build error, due to an incomplete conversion where an extra argument was left, although the function being called was left: stmmac_main.c: In function ‘stmmac_cmdline_opt’: stmmac_main.c:7586:28: error: too many arguments to function ‘sysfs_streq’ 7586 | } else if (sysfs_streq(opt, "pause:", 6)) { | ^~~~~~~~~~~ In file included from ../include/linux/bitmap.h:11, from ../include/linux/cpumask.h:12, from ../include/linux/smp.h:13, from ../include/linux/lockdep.h:14, from ../include/linux/mutex.h:17, from ../include/linux/notifier.h:14, from ../include/linux/clk.h:14, from ../drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:17: ../include/linux/string.h:185:13: note: declared here 185 | extern bool sysfs_streq(const char *s1, const char *s2); | ^~~~~~~~~~~ What's even worse is that the patch is flat out wrong. The stmmac_cmdline_opt() function does not parse sysfs input, but cmdline input such as "stmmaceth=tc:1,pause:1". The pattern of using strsep() followed by strncmp() for such strings is not unique to stmmac, it can also be found mainly in drivers under drivers/video/fbdev/. With strncmp("tc:", 3), the code matches on the "tc:1" token properly. With sysfs_streq("tc:"), it doesn't. Fixes: f72cd76b05ea ("net: stmmac: use sysfs_streq() instead of strncmp()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20221125105304.3012153-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28net: usb: cdc_ether: add u-blox 0x1343 compositionDavide Tronchin
Add CDC-ECM support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20221124112811.3548-1-davide.tronchin.94@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28Merge tag 'devicetree-fixes-for-6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fix from Rob Herring: - Fix DT node reference counting for of_fwnode_get_reference_args() exit path * tag 'devicetree-fixes-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: property: decrement node refcount in of_fwnode_get_reference_args()
2022-11-28net: wwan: iosm: fix incorrect skb lengthM Chetan Kumar
skb passed to network layer contains incorrect length. In mux aggregation protocol, the datagram block received from device contains block signature, packet & datagram header. The right skb len to be calculated by subracting datagram pad len from datagram length. Whereas in mux lite protocol, the skb contains single datagram so skb len is calculated by subtracting the packet offset from datagram header. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix crash in peek throughput testM Chetan Kumar
Peek throughput UL test is resulting in crash. If the UL transfer block free list is exhaust, the peeked skb is freed. In the next transfer freed skb is referred from UL list which results in crash. Don't free the skb if UL transfer blocks are unavailable. The pending skb will be picked for transfer on UL transfer block available. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix dma_alloc_coherent incompatible pointer typeM Chetan Kumar
Fix build error reported on armhf while preparing 6.1-rc5 for Debian. iosm_ipc_protocol.c:244:36: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type. Change phy_ap_shm type from phys_addr_t to dma_addr_t. Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol") Reported-by: Bonaccorso Salvatore <carnil@debian.org> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix kernel test robot reported errorM Chetan Kumar
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain integer as NULL pointer. Use skb_trim() to reset skb tail & len. Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: phylink: fix PHY validation with rate adaptionRussell King (Oracle)
Tim Harvey reports that link modes which he does not expect to be supported are being advertised, and this is because of the workaround we have for PHYs that switch interface modes. Fix this up by checking whether rate matching will be used for the requested interface mode, and if rate matching will be used, perform validation only with the requested interface mode, rather than invoking this workaround. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: nixge: fix NULL dereferenceYuri Karpov
In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Yuri Karpov <YKarpov@ispras.ru> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: net_netdev: Fix error handling in ntb_netdev_init_module()Yuan Can
The ntb_netdev_init_module() returns the ntb_transport_register_client() directly without checking its return value, if ntb_transport_register_client() failed, the NTB client device is not unregistered. Fix by unregister NTB client device when ntb_transport_register_client() failed. Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28octeontx2-pf: Add support to filter packet based on IP fragmentSuman Ghosh
1. Added support to filter packets based on IP fragment. For IPv4 packets check for ip_flag == 0x20 (more fragment bit set). For IPv6 packets check for next_header == 0x2c (next_header set to 'fragment header for IPv6') 2. Added configuration support from both "ethtool ntuple" and "tc flower". Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: mtk_wed: add wcid overwritten support for wed v1Sujuan Chen
All wed versions should enable the wcid overwritten feature, since the wcid size is controlled by the wlan driver. Tested-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: ti: am65-cpsw: fix error handling in am65_cpsw_nuss_probe()Zhang Changzhong
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev() even if register_netdev() fails, which triggers WARN_ON(1) in unregister_netdevice_many(). To fix it, make sure that unregister_netdev() is called only on registered netdev. Compile tested only. Fixes: 84b4aa493249 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28Merge tag 'mlx5-fixes-2022-11-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2022-11-24 This series provides bug fixes to mlx5 driver. Focusing on error handling and proper memory management in mlx5, in general and in the newly added macsec module. I still have few fixes left in my queue and I hope those will be the last ones for mlx5 for this cycle. Please pull and let me know if there is any problem. Happy thanksgiving. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100) This series contains updates to various Intel drivers. Shang XiaoJing fixes init module error path stop to resource leaks for ixgbevf and i40e. Yuan Can also does the same for fm10k and iavf. Wang Hai stops freeing of skb as it was causing use after free error for e100. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-27Merge tag 'usb-6.1-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.1-rc7 that resolve some reported problems: - cdnsp driver fixes for reported problems - dwc3 fixes for some small reported problems - uvc gadget driver fix for reported regression All of these have been in linux-next with no reported problems" * tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1 usb: dwc3: gadget: Clear ep descriptor last usb: dwc3: exynos: Fix remove() function usb: cdnsp: Fix issue with Clear Feature Halt Endpoint usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer usb: gadget: uvc: also use try_format in set_format
2022-11-27Merge tag 'char-misc-6.1-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes for 6.1-rc7, they include: - build warning fix for the vdso when using new versions of grep - iio driver fixes for reported issues - small nvmem driver fixes - fpga Kconfig fix - interconnect dt binding fix All of these have been in linux-next with no reported issues" * tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lib/vdso: use "grep -E" instead of "egrep" nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear() nvmem: rmem: Fix return value check in rmem_read() fpga: m10bmc-sec: Fix kconfig dependencies dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid" iio: adc: aspeed: Remove the trim valid dts property. iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails iio: accel: bma400: Fix memory leak in bma400_get_steps_reg() iio: light: rpr0521: add missing Kconfig dependencies iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: health: afe4403: Fix oob read in afe4403_read_raw iio: light: apds9960: fix wrong register for gesture gain dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
2022-11-27Merge tag 'timers_urgent_for_v6.1_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Return the proper timer register width (31 bits) for a 32-bit signed register in order to avoid a timer interrupt storm on ARM XGene-1 hardware running in NO_HZ mode * tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
2022-11-27Merge tag 'x86_urgent_for_v6.1_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - ioremap: mask out the bits which are not part of the physical address *after* the size computation is done to prevent any hypothetical ioremap failures - Change the MSR save/restore functionality during suspend to rely on flags denoting that the related MSRs are actually supported vs reading them and assuming they are (an Atom one allows reading but not writing, thus breaking this scheme at resume time) - prevent IV reuse in the AES-GCM communication scheme between SNP guests and the AMD secure processor * tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioremap: Fix page aligned size calculation in __ioremap_caller() x86/pm: Add enumeration check before spec MSRs save/restore setup x86/tsx: Add a feature bit for TSX control MSR support virt/sev-guest: Prevent IV reuse in the SNP guest driver
2022-11-27net: phy: fix null-ptr-deref while probe() failedYang Yingliang
I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-30 07:14:43 +0000