| Age | Commit message (Collapse) | Author |
|---|
|
Populate the supported interfaces bitmap and MAC capabilities mask for
the macb driver and remove the old validate implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add support for PHY_INTERFACE_MODE_5GBASER.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110
common PHY driver.
This is currently only supported via SMC calls to TF-A. Legacy support
may be added later, if needed.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are three boolean variable which were not initialized and later
being used in the code.
Signed-off-by: Yacov Simhony <ysimhony@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4904b6ea1f9db ("net: phy: phylink: Use PHY device interface if
N/A") introduced handling for the phy interface mode where this is not
known at phylink creation time. This was never added to the OF/fwnode
paths, but is necessary when the phy is present in DT, but the phy-mode
is not specified.
Add this handling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Some devices expose memory-mapped c22-compliant PHYs. Because these
devices do not have an MDIO bus, we cannot use the existing helpers.
Refactor the existing helpers to allow supplying the values for c22
registers directly, instead of using MDIO to access them. Only get_state
and set_adversisement are converted, since they contain the most complex
logic.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
1000base-KX was missed in phylink_caps_to_linkmodes(), add it. This
will be necessary to convert stmmac with xpcs to ensure we don't drop
any supported linkmodes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
There were several cases where validate() would return bogus supported
modes with unusual combinations of interfaces and capabilities. For
example, if state->interface was 10GBASER and the macb had HIGH_SPEED
and PCS but not GIGABIT MODE, then 10/100 modes would be set anyway. In
another case, SGMII could be enabled even if the mac was not a GEM
(despite this being checked for later on in mac_config()). These
inconsistencies make it difficult to refactor this function cleanly.
There is still the open question of what exactly the requirements for
SGMII and 10GBASER are, and what SGMII actually supports. If someone
from Cadence (or anyone else with access to the GEM/MACB datasheet)
could comment on this, it would be greatly appreciated. In particular,
what is supported by Cadence vs. vendor extension/limitation?
To address this, the current logic is split into three parts. First, we
determine what we support, then we eliminate unsupported interfaces, and
finally we set the appropriate link modes. There is still some cruft
related to NA, but this can be removed in a future patch.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
DPAA2 has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy interface mode bitmap for the Freescale DPAA2 driver
with interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
ag71xx apparently only supports MII port type, which makes it different
from other implementations. However, Oleksij says there is no special
reason for this.
Convert the driver to use phylink_generic_validate(), which will allow
all ethtool port linkmodes instead of only MII, giving the driver
consistent behaviour with other drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy_interface_t bitmap for the Atheros ag71xx driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
ocelot_net has no special behaviour in its validation implementation, so
can be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode in the
validation function. Remove this to simplify it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy interface mode bitmap for the MSCC Ocelot driver with
the interface modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
mtk_eth_soc has no special behaviour in its validation implementation,
so can be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function, and we can also get rid of our hack to indicate
both 1000base-X and 2500base-X if the comphy is present to make that
work. Remove this hack and use of phylink_helper_basex_speed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy interface mode bitmap for the Mediatek driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Sparx5 has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
sparx5_phylink_validate() no longer needs to check for
PHY_INTERFACE_MODE_NA as phylink will walk the supported interface
types to discover the link mode capabilities. Neither is it necessary
to check the device capabilities as we will not be called for
unsupported interface modes. Remove these checks.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy_interface_t bitmap for the Microchip Sparx5 driver
with interfaces modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
enetc has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode in the
validation function. Remove this to simplify it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy_interface_t bitmap for the Freescale enetc driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
axienet has no special behaviour in its validation implementation, so
can be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode in the
validation function. Remove this to simplify it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Populate the phy_interface_t bitmap for the Xilinx axienet driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Convert mvpp2 to use phylink_generic_validate() for the bulk of its
validate() implementation. This network adapter has a restriction
that for 802.3z links, autonegotiation must be enabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Convert mvneta to use phylink_generic_validate() for the bulk of its
validate() implementation. This network adapter has a restriction
that for 802.3z links, autonegotiation must be enabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a generic validate() implementation using the supported_interfaces
and a bitmask of MAC pause/speed/duplex capabilities. This allows us
to entirely eliminate many driver private validate() implementations.
We expose the underlying phylink_get_linkmodes() function so that
drivers which have special needs can still benefit from conversion.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"A small fixup to the Zinitix touchscreen driver to avoid enabling the
IRQ line before we successfully requested it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - make sure the IRQ is allocated before it gets enabled
|
|
This reverts commit f7d6779df642720e22bffd449e683bb8690bd3bf.
This bisected regression has impacted suspend-resume stability
since 5.15-rc1. It regressed -stable via 5.14.10.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315
Fixes: f7d6779df64 ("drm/amdgpu: stop scheduler when calling hw_fini (v2)")
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.
Fix that by moving the irq request before the input device registration.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 26822652c85e ("Input: add zinitix touchscreen driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes have come in, nothing overly severe but would be good
to get in by final release:
- More specific compatible fields on the qspi controller for socfpga,
to enable quirks in the driver
- A runtime PM fix for Renesas to fix mismatched reference counts on
errors"
* tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
reset: renesas: Fix Runtime PM usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix the regression with AMD GPU suspend by reverting the
handling of bus regulators in the I2C core.
Also, there is a fix for the MPC driver to prevent an
out-of-bound-access"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: core: support bus regulator controlling in adapter"
i2c: mpc: Avoid out of bounds memory access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Three fixes for the 5.16 cycle:
- Avoid going beyond last capacity in the power-supply core
- Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
in LLVM resulting in a build failure
- Fix ADC measurements in bq25890 charger driver"
* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: ltc2952: Fix use of floating point literals
power: bq25890: Enable continuous conversion for ADC at charging
power: supply: core: Break capacity loop
|
|
Pull block fix from Jens Axboe:
"Just the md bitmap regression this time"
* tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block:
md/raid1: fix missing bitmap update w/o WriteMostly devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Tony Luck:
"Fix 10nm EDAC driver to release and unmap resources on systems without
HBM"
* tag 'edac_urgent_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: Release mdev/mbase when failing to detect HBM
|
|
This largely reverts commit 5a7b95fb993ec399c8a685552aa6a8fc995c40bd. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.
Fixes: 5a7b95fb993e ("i2c: core: support bus regulator controlling in adapter")
Reported-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.com
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850
Tested-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # 5.14+
|
|
Pull drm fixes from Dave Airlie:
"There is only the amdgpu runtime pm regression fix in here:
amdgpu:
- suspend/resume fix
- fix runtime PM regression"
* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable runpm if we are the primary adapter
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
drm/amd/pm: keep the BACO feature enabled for suspend
|
|
Pull rdma fixes from Jason Gunthorpe:
"Last pull for 5.16, the reversion has been known for a while now but
didn't get a proper fix in time. Looks like we will have several
info-leak bugs to take care of going foward.
- Revert the patch fixing the DM related crash causing a widespread
regression for kernel ULPs. A proper fix just didn't appear this
cycle due to the holidays
- Missing NULL check on alloc in uverbs
- Double free in rxe error paths
- Fix a new kernel-infoleak report when forming ah_attr's without
GRH's in ucma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Don't infoleak GRH fields
RDMA/uverbs: Check for null return of kmalloc_array
Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
RDMA/rxe: Prevent double freeing rxe_map_set()
|
|
ssh://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-31:
amdgpu:
- Suspend/resume fix
- Restore runtime pm behavior with efifb
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231143825.11479-1-alexander.deucher@amd.com
|
|
When performing an I2C transfer where the last message was a write KASAN
would complain:
BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
Read of size 2 at addr c814e310 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1
Call Trace:
[e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
[e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0
[e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204
[e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630
[e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240
[e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
[e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110
[e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0
[e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370
[e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80
[e5ee9fc0] [c0006b54] __do_irq+0x64/0x200
[e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0
[c812dd50] [e3eaab20] 0xe3eaab20
[c812dd90] [c0007a4c] do_IRQ+0x1c/0x30
[c812dda0] [c0000c04] ExternalInput+0x144/0x160
--- interrupt: 500 at arch_cpu_idle+0x34/0x60
NIP: c000b684 LR: c000b684 CTR: c0019688
REGS: c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8)
MSR: 00029002 <CE,EE,ME> CR: 22000488 XER: 20000000
GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
NIP [c000b684] arch_cpu_idle+0x34/0x60
LR [c000b684] arch_cpu_idle+0x34/0x60
--- interrupt: 500
[c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
[c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230
[c812dee0] [c00af0e8] do_idle+0x1c8/0x200
[c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30
[c812df20] [c001e010] start_secondary+0x5d0/0xba0
[c812dff0] [c00028a0] __secondary_start+0x90/0xdc
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts updates for v5.16, part 3
- Change the SoCFPGA compatible to "intel,socfpga-qspi"
- Update dt-bindings document to include "intel,socfpga-qspi"
* tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (361 commits)
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
Linux 5.16-rc7
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
platform/x86: intel_pmc_core: fix memleak on registration failure
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
...
Link: https://lore.kernel.org/r/20211227103644.566694-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
into arm/fixes
Reset controller fixes for v5.16, part 2
Fix pm_runtime_resume_and_get() error handling in the
reset-rzg2l-usbphy-ctrl driver.
* tag 'reset-fixes-for-v5.16-2' of git://git.pengutronix.de/pza/linux:
reset: renesas: Fix Runtime PM usage
reset: tegra-bpmp: Revert Handle errors in BPMP response
Link: https://lore.kernel.org/r/20220105172515.273947-1-p.zabel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
|
|
If dst->is_global field is not set, the GRH fields are not cleared
and the following infoleak is reported.
=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
_copy_to_user+0x1c9/0x270 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
vfs_write+0x8ce/0x2030 fs/read_write.c:588
ksys_write+0x28b/0x510 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
__do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Local variable resp created at:
ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
Bytes 40-59 of 144 are uninitialized
Memory access of size 144 starts at ffff888167523b00
Data copied to user address 0000000020000100
CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
Fixes: 4ba66093bdc6 ("IB/core: Check for global flag when using ah_attr")
Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com
Reported-by: syzbot+6d532fa8f9463da290bc@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
