| Age | Commit message (Collapse) | Author |
|---|
|
RMI4 F1A implements capacitive keys. Add support for touch keys found in
some Synaptics touch controller configurations.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-2-838d83c72e7f@apitzsch.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A few drivers that use the legacy GPIOLIB interfaces can be enabled
even when GPIOLIB is disabled entirely. With my previous patch this
now causes build failures like:
drivers/nfc/s3fwrn5/uart.c: In function 's3fwrn82_uart_parse_dt':
drivers/nfc/s3fwrn5/uart.c:100:14: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
These did not show up in my randconfig tests because randconfig almost
always has GPIOLIB selected by some other driver, and I did most
of the testing with follow-up patches that address the failures
properly.
Move the symbol outside of the 'if CONFIG_GPIOLIB' block for the moment
to avoid the build failures. It can be moved back and turned off by
default once all the driver specific changes are merged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507261934.yIHeUuEQ-lkp@intel.com/
Fixes: 678bae2eaa81 ("gpiolib: make legacy interfaces optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250726211053.2226857-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Forcepad devices do not have physical buttons underneath the surface and
use F21 to report "clicks" based on touch pressure.
Signed-off-by: Marge Yang <Marge.Yang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20250716033648.1785509-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.
Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix possible warning:
>> drivers/rtc/rtc-pcf85063.c:566:37: warning: unused variable 'config_rv8063' [-Wunused-const-variable]
566 | static const struct pcf85063_config config_rv8063 = {
| ^~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507241607.dmz2qrO5-lkp@intel.com/
Link: https://lore.kernel.org/r/20250724090420.917705-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last fix for v6.16, removing some hard coding to avoid data
corruption on some NAND devices in the QPIC driver"
* tag 'spi-fix-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: don't hardcode ECC steps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- qup: avoid potential hang when waiting for bus idle
- tegra: improve ACPI reset error handling
- virtio: use interruptible wait to prevent hang during transfer
* tag 'i2c-for-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qup: jump out of the loop in case of timeout
i2c: virtio: Avoid hang by using interruptible completion wait
i2c: tegra: Fix reset error handling with ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few Allwinner clk driver fixes:
- Mark Allwinner A523 MBUS clock as critical to avoid
system stalls
- Fix names of CSI related clocks on Allwinner V3s. This
includes changes to the driver, DT bindings and DT files.
- Fix parents of TCON clock on Allwinner V3s"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
clk: sunxi-ng: a523: Mark MBUS clock as critical
|
|
If CONFIG_ZL3073X is enabled but both CONFIG_ZL3073X_I2C and
CONFIG_ZL3073X_SPI are disabled, the compilation may fail because
CONFIG_REGMAP is not enabled.
Fix the issue by selecting CONFIG_REGMAP when CONFIG_ZL3073X is enabled.
Fixes: 2df8e64e01c10 ("dpll: Add basic Microchip ZL3073x support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250726184145.25769-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ff3fbcdd4724 ("selftests: tc: Add generic erspan_opts matching support
for tc-flower") started triggering the following kmemleak warning:
unreferenced object 0xffff888015fb0e00 (size 512):
comm "softirq", pid 0, jiffies 4294679065
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 40 d2 85 9e ff ff ff ff ........@.......
41 69 59 9d ff ff ff ff 00 00 00 00 00 00 00 00 AiY.............
backtrace (crc 30b71e8b):
__kmalloc_noprof+0x359/0x460
metadata_dst_alloc+0x28/0x490
erspan_rcv+0x4f1/0x1160 [ip_gre]
gre_rcv+0x217/0x240 [ip_gre]
gre_rcv+0x1b8/0x400 [gre]
ip_protocol_deliver_rcu+0x31d/0x3a0
ip_local_deliver_finish+0x37d/0x620
ip_local_deliver+0x174/0x460
ip_rcv+0x52b/0x6b0
__netif_receive_skb_one_core+0x149/0x1a0
process_backlog+0x3c8/0x1390
__napi_poll.constprop.0+0xa1/0x390
net_rx_action+0x59b/0xe00
handle_softirqs+0x22b/0x630
do_softirq+0xb1/0xf0
__local_bh_enable_ip+0x115/0x150
vrf_ip6_input_dst unconditionally sets skb dst entry, add a call to
skb_dst_drop to drop any existing entry.
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250725160043.350725-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Silence deferred probes using dev_err_probe(). This can happen when
the ethernet PHY uses an IRQ line attached to a i2c GPIO expander. If the
i2c bus is not yet ready, a probe deferral can occur.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725055615.259945-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no break time in the while() loop, so every time at the end of
igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders
the return value always false. But theoretically, the result should be
set after calling xsk_tx_peek_release_desc_batch(). We can take
i40e_xmit_zc() as a good example.
Returning false means we're not done with transmission and we need one
more poll, which is exactly what igb_xmit_zc() always did before this
patch. After this patch, the return value depends on the nb_pkts value.
Two cases might happen then:
1. if (nb_pkts < budget), it means we process all the possible data, so
return true and no more necessary poll will be triggered because of
this.
2. if (nb_pkts == budget), it means we might have more data, so return
false to let another poll run again.
Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A negative overflow can happen when the budget number of descs are
consumed. as long as the budget is decreased to zero, it will again go
into while (budget-- > 0) statement and get decreased by one, so the
overflow issue can happen. It will lead to returning true whereas the
expected value should be false.
In this case where all the budget is used up, it means zc function
should return false to let the poll run again because normally we
might have more data to process. Without this patch, zc function would
return true instead.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCIe specification allows three attention indicator states, on, off,
and blink. Enable all three states instead of basic on / off control.
This changes the userspace API (writes to the sysfs "attention" file) to
match the behavior of pciehp. Here's the comparison of previous and new
indicator behavior:
Value Previous New Behavior
----- -------- ------------------------
0 off (reserved, so undefined)
1 on on
2 on blink
3 on off
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: add specifics of behavior change]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1210309411.1359866.1752615582001.JavaMail.zimbra@raptorengineeringinc.com
|
|
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
|
|
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/505981576.1359853.1752615415117.JavaMail.zimbra@raptorengineeringinc.com
|
|
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
|
|
The PTP function of KSZ8463 is on by default. However, its proprietary
way of storing timestamp directly in a reserved field inside the PTP
message header is not suitable for use with the current Linux PTP stack
implementation. It is necessary to disable the PTP function to not
interfere the normal operation of the MAC.
Note the PTP driver for KSZ switches does not work for KSZ8463 and is not
activated for it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-7-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fiber ports in KSZ8463 cannot be detected internally, so it requires
specifying that condition in the device tree. Like the one used in
Micrel PHY the port link can only be read and there is no write to the
PHY. The driver programs registers to operate fiber ports correctly.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-6-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses 16-bit register definitions so it writes differently for
8-bit switch MAC address.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-5-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 does not use same set of registers as KSZ8863 so it is necessary
to change some registers when using KSZ8463.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-4-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Agilex5 compatible value.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250724154052.205706-5-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-25
The patch is by Stephane Grosjean and adds support the recent firmware
of USB CAN FD interfaces to the peak_usb driver.
* tag 'linux-can-fixes-for-6.16-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix USB FD devices potential malfunction
====================
Link: https://patch.msgid.link/20250725101619.4095105-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-07-25
The first patch is by Khaled Elnaggar and converts the janz-ican3
driver's fwinfo_show() to sysfs_emit().
Vincent Mailhol contributes 3 patches that first fix a warning in the
ti_hecc driver and then add missing COMPILE_TEST more compile
coverage to the ti_hecc and tscan1 driver.
Randy Dunlap's patch let's the tscan1 driver depend on PC104.
A patch by Luis Felipe Hernandez fixes a kernel-doc error in the
ctucanfd driver.
Jimmy Assarsson contributes 10 patches for the kvaser_pciefd and 11
for the kvaser_usb driver. Both series simplify the identification of
physical the CAN interfaces and add devlink support to get information
about the running firmware.
* tag 'linux-can-next-for-6.17-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
Documentation: devlink: add devlink documentation for the kvaser_usb driver
can: kvaser_usb: Add devlink port support
can: kvaser_usb: Expose device information via devlink info_get()
can: kvaser_usb: Add devlink support
can: kvaser_usb: Store additional device information
can: kvaser_usb: Store the different firmware version components in a struct
can: kvaser_usb: Move comment regarding max_tx_urbs
can: kvaser_usb: Add intermediate variables
can: kvaser_usb: Assign netdev.dev_port based on device channel index
can: kvaser_usb: Add support for ethtool set_phys_id()
can: kvaser_usb: Add support to control CAN LEDs on device
Documentation: devlink: add devlink documentation for the kvaser_pciefd driver
can: kvaser_pciefd: Add devlink port support
can: kvaser_pciefd: Expose device firmware version via devlink info_get()
can: kvaser_pciefd: Add devlink support
can: kvaser_pciefd: Split driver into C-file and header-file.
can: kvaser_pciefd: Store device channel index
can: kvaser_pciefd: Store the different firmware version components in a struct
can: kvaser_pciefd: Add intermediate variable for device struct in probe()
can: kvaser_pciefd: Add support for ethtool set_phys_id()
...
====================
Link: https://patch.msgid.link/20250725161327.4165174-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As part of the removal of the variably-sized sockaddr for kernel
internals, replace struct sockaddr with sockaddr_inet in the endpoint
union.
No binary changes; the union size remains unchanged due to sockaddr_inet
matching the size of sockaddr_in6.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250722171836.1078436-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Underneath "TIS Config" tag expose TIS diagnostic information.
Expose the tisn of each TC under each lag port.
$ sudo devlink health diagnose auxiliary/mlx5_core.eth.2/131072 reporter tx
......
TIS Config:
lag port: 0 tc: 0 tisn: 0
lag port: 1 tc: 0 tisn: 8
......
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1753194228-333722-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remote IPsec tunnel endpoint may refer to a network segment that is
not directly connected to the host. In such a case, IPsec tunnel
endpoints are connected to a router and reachable via a routing path.
In IPsec packet offload mode, HW is initialized with the MAC address
of both IPsec tunnel endpoints.
Extend the current IPsec init MACs procedure to resolve nexthop for
routed networks. Direct neighbour lookup and probe is still used
for directly connected networks and as a fallback mechanism if fib
lookup fails.
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1753194228-333722-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
into soc/drivers
HiSilicon driver updates for v6.17
- Print the hardware ID instead of the index in the HCCS driver
* tag 'hisi-drivers-for-6.17' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
Link: https://lore.kernel.org/r/6879FFED.1050002@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.17
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
* tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
Link: https://lore.kernel.org/r/20250720030743.285440-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rework the read and write code paths in the driver to support operation
in atomic contexts. To achieve this, the driver must not rely on IRQs
or perform any scheduling, e.g., via a sleep or schedule routine.
Implement atomic, sleep-free, and IRQ-less operation. This increases
complexity but is necessary for atomic I2C transfers required by some
hardware configurations, e.g., to trigger reboots on an external PMIC chip.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250718133429.67219-3-francesco@dolcini.it
|
|
Replaces polling loops with the readl_poll_timeout() helper macro.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250718133429.67219-2-francesco@dolcini.it
|
|
Since secs_to_jiffies() has been introduced in commit b35108a51cf7
("jiffies: Define secs_to_jiffies()"), we can use it to avoid scaling
the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250613110649.3283336-1-liyuesong@vivo.com
|
|
Use min() to reduce the code and improve its readability.
The type of the max parameter in the st_i2c_rd_fill_tx_fifo()
was changed from int to u32, because the max parameter passed
in is always greater than 0.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250709042347.550993-1-rongqianfeng@vivo.com
|
|
Implement the phy enable/disable calls for b53 mmap, and
set the power down registers in the ephy control register
appropriately.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-8-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6368.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-7-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6318, which also applies to
bcm6328 and bcm6362.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-6-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On bcm63xx SoCs there are registers that control the PHYs in
the GPIO controller. Allow the b53 driver to access them
by passing in the syscon through the device tree.
Add a structure to describe the ephy control register
and add register info for bcm63268.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-5-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add defines for bcm6318, bcm6328, bcm6362, bcm6368 chip IDs,
update tables and switch init.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-4-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add phy enable/disable to b53 ops to be called when
enabling/disabling ports.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
Fixes: 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Larysch <fl@n621.de>
Link: https://patch.msgid.link/20250723222250.13960-1-fl@n621.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes (part 2) from Dave Airlie:
"Just the follow up fixes for i915 and xe, all pretty minor.
i915:
- Fix DP 2.7 Gbps DP_LINK_BW value on g4x
- Fix return value on intel_atomic_commit_fence_wait
xe:
- Fix build without debugfs"
* tag 'drm-fixes-2025-07-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Fix build without debugfs
drm/i915/display: Fix dma_fence_wait_timeout() return value handling
drm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4x
|
|
When KSZ8863 support was first added to KSZ driver the RX drop MIB
counter was somehow defined as 0x105. The TX drop MIB counter
starts at 0x100 for port 1, 0x101 for port 2, and 0x102 for port 3, so
the RX drop MIB counter should start at 0x103 for port 1, 0x104 for
port 2, and 0x105 for port 3.
There are 5 ports for KSZ8895, so its RX drop MIB counter starts at
0x105.
Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250723030403.56878-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local variable i is used to iterate over unsigned
values. The lower bound of the loop is set to 0. While
the upper bound is cgx->lmac_count, where they lmac_count is
an u8. So the theoretical upper bound is 255.
As is, GCC can't see this range of values and warns that
a formatted string, which includes the %d representation of i,
may overflow the buffer provided.
GCC 15.1.0 says:
.../cgx.c: In function 'cgx_lmac_init':
.../cgx.c:1737:49: warning: '%d' directive writing between 1 and 11 bytes into a region of size between 4 and 6 [-Wformat-overflow=]
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~
.../cgx.c:1737:37: note: directive argument in the range [-2147483641, 254]
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~~~~~~~~~~~~~~
.../cgx.c:1737:17: note: 'sprintf' output between 12 and 24 bytes into a destination of size 16
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Empirically, changing the type of i from (signed) int to unsigned int
addresses this problem. I assume by allowing GCC to see the range of
values described above.
Also update the format specifiers for the integer values in the string
in question from %d to %u. This seems appropriate as they are now both
unsigned.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250724-octeontx2-af-unsigned-v1-1-c745c106e06f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, USB CDC devices that do not use MDIO to get link status have
their duplex mode set to half-duplex by default. However, since the CDC
specification does not define a duplex status, this can be misleading.
This patch changes the default to DUPLEX_UNKNOWN in the absence of MII,
which more accurately reflects the state of the link and avoids implying
an incorrect or error state.
Link: https://lore.kernel.org/all/20250723152151.70a8034b@kernel.org/
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250724013133.1645142-1-yicongsrfy@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cosmin reports the following locking issue:
# BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:275
# dump_stack_lvl+0x4f/0x60
# __might_resched+0xeb/0x140
# mutex_lock+0x1a/0x40
# dev_set_promiscuity+0x26/0x90
# __dev_set_promiscuity+0x85/0x170
# __dev_set_rx_mode+0x69/0xa0
# dev_uc_add+0x6d/0x80
# vlan_dev_open+0x5f/0x120 [8021q]
# __dev_open+0x10c/0x2a0
# __dev_change_flags+0x1a4/0x210
# netif_change_flags+0x22/0x60
# do_setlink.isra.0+0xdb0/0x10f0
# rtnl_newlink+0x797/0xb00
# rtnetlink_rcv_msg+0x1cb/0x3f0
# netlink_rcv_skb+0x53/0x100
# netlink_unicast+0x273/0x3b0
# netlink_sendmsg+0x1f2/0x430
Which is similar to recent syzkaller reports in [0] and [1] and triggers
because macsec does not advertise IFF_UNICAST_FLT although it has proper
ndo_set_rx_mode callback that takes care of pushing uc/mc addresses
down to the real device.
In general, dev_uc_add call path is problematic for stacking
non-IFF_UNICAST_FLT because we might grab netdev instance lock under
addr_list_lock spinlock, so this is not a systemic fix.
0: https://lore.kernel.org/netdev/686d55b4.050a0220.1ffab7.0014.GAE@google.com
1: https://lore.kernel.org/netdev/68712acf.a00a0220.26a83e.0051.GAE@google.com/
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: Cosmin Ratiu <cratiu@nvidia.com>
Tested-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723224715.1341121-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
