summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-10ice: Implement driver functionality to dump serdes equalizer valuesAnil Samal
To debug link issues in the field, serdes Tx/Rx equalizer values help to determine the health of serdes lane. Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer. The following list of equalizer param is supported a. rx_equalization_pre2 b. rx_equalization_pre1 c. rx_equalization_post1 d. rx_equalization_bflf e. rx_equalization_bfhf f. rx_equalization_drate g. tx_equalization_pre1 h. tx_equalization_pre3 i. tx_equalization_atten j. tx_equalization_post1 k. tx_equalization_pre2 Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anil Samal <anil.samal@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10ice: Implement driver functionality to dump fec statisticsAnil Samal
To debug link issues in the field, it is paramount to dump fec corrected/uncorrected block counts from firmware. Firmware requires PCS quad number and PCS port number to read FEC statistics. Current driver implementation does not maintain above physical properties of a port. Add new driver API to derive physical properties of an input port.These properties include PCS quad number, PCS port number, serdes lane count, primary serdes lane number. Extend ethtool option '--show-fec' to support fec statistics. The IEEE standard mandates two sets of counters: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks Standard defines above statistics per lane but current implementation supports total FEC statistics per port i.e. sum of all lane per port. Find sample output below FEC parameters for ens21f0np0: Supported/Configured FEC encodings: Auto RS BaseR Active FEC encoding: RS Statistics: corrected_blocks: 0 uncorrectable_blocks: 0 Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anil Samal <anil.samal@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10ice: Extend Sideband Queue command to support flagsAnil Samal
Current driver implementation for Sideband Queue supports a fixed flag (ICE_AQ_FLAG_RD). To retrieve FEC statistics from firmware, Sideband Queue command is used with a different flag. Extend API for Sideband Queue command to use 'flags' as input argument. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anil Samal <anil.samal@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240709202951.2103115-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10net: phy: aquantia: add support for aqr115cBartosz Golaszewski
Add support for a new model to the Aquantia driver. This PHY supports 2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without in-band signalling so reuse the existing mode to avoid changing the uAPI. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-10net: phy: aquantia: wait for the GLOBAL_CFG to start returning real valuesBartosz Golaszewski
When the PHY is first coming up (or resuming from suspend), it's possible that although the FW status shows as running, we still see zeroes in the GLOBAL_CFG set of registers and cannot determine available modes. Since all models support 10M, add a poll and wait the config to become available. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-10net: phy: aquantia: wait for FW reset before checking the vendor IDBartosz Golaszewski
Checking the firmware register before it complete the boot process makes no sense, it will report 0 even if FW is available from internal memory. Always wait for FW to boot before continuing or we'll unnecessarily try to load it from nvmem/filesystem and fail. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-10net: phy: aquantia: rename and export aqr107_wait_reset_complete()Bartosz Golaszewski
This function is quite generic in this driver and not limited to aqr107. We will use it outside its current compilation unit soon so rename it and declare it in the header. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-09netxen_nic: Use {low,upp}er_32_bits() helpersGeert Uytterhoeven
Use the existing {low,upp}er_32_bits() helpers instead of defining custom variants. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/319d4a5313ac75f7bbbb6b230b6802b18075c3e0.1720430602.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5e: CT: Initialize err to 0 to avoid warningCosmin Ratiu
It is theoretically possible to return bogus uninitialized values from mlx5_tc_ct_entry_replace_rules, even though in practice this will never be the case as the flow rule will be part of at least the regular ct table or the ct nat table, if not both. But to reduce noise, initialize err to 0. Fixes: 49d37d05f216 ("net/mlx5: CT: Separate CT and CT-NAT tuple entries") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5e: SHAMPO, Add missing aggregate counterDragos Tatulea
When the rx_hds_nodata_packets/bytes counters were added, the aggregate counters were omitted. This patch adds them. Fixes: e95c5b9e8912 ("net/mlx5e: SHAMPO, Add header-only ethtool counters for header data split") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5: DR, Remove definer functions from SW Steering APIYevgeny Kliteynik
No need to expose definer get/put functions as part of SW Steering API - they are internal functions. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: pci: Lock configuration space of upstream bridge during resetIdo Schimmel
The driver triggers a "Secondary Bus Reset" (SBR) by calling __pci_reset_function_locked() which asserts the SBR bit in the "Bridge Control Register" in the configuration space of the upstream bridge for 2ms. This is done without locking the configuration space of the upstream bridge port, allowing user space to access it concurrently. Linux 6.11 will start warning about such unlocked resets [1][2]: pcieport 0000:00:01.0: unlocked secondary bus reset via: pci_reset_bus_function+0x51c/0x6a0 Avoid the warning and the concurrent access by locking the configuration space of the upstream bridge prior to the reset and unlocking it afterwards. [1] https://lore.kernel.org/all/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com/ [2] https://lore.kernel.org/all/20240531213150.GA610983@bhelgaas/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/9937b0afdb50f2f2825945393c94c093c04a5897.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: core_thermal: Report valid current state during cooling device ↵Ido Schimmel
registration Commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") changed the thermal core to read the current state of the cooling device as part of the cooling device's registration. This is incompatible with the current implementation of the cooling device operations in mlxsw, leading to initialization failure with errors such as: mlxsw_spectrum 0000:01:00.0: Failed to register cooling device mlxsw_spectrum 0000:01:00.0: cannot register bus device The reason for the failure is that when the get current state operation is invoked the driver tries to derive the index of the cooling device by walking a per thermal zone array and looking for the matching cooling device pointer. However, the pointer is returned from the registration function and therefore only set in the array after the registration. The issue was later fixed by commit 1af89dedc8a5 ("thermal: core: Do not fail cdev registration because of invalid initial state") by not failing the registration of the cooling device if it cannot report a valid current state during registration, although drivers are responsible for ensuring that this will not happen. Therefore, make sure the driver is able to report a valid current state for the cooling device during registration by passing to the registration function a per cooling device private data that already has the cooling device index populated. While at it, call thermal_cooling_device_unregister() unconditionally since the function returns immediately if the cooling device pointer is NULL. Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/c823c4678b6b7afb902c35b3551c81a053afd110.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: Warn about invalid accesses to array fieldsPetr Machata
A forgotten or buggy variable initialization can cause out-of-bounds access to a register or other item array field. For an overflow, such access would mangle adjacent parts of the register payload. For an underflow, due to all variables being unsigned, the access would likely trample unrelated memory. Since neither is correct, replace these accesses with accesses at the index of 0, and warn about the issue. Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/b988fb265c2f6c1206fe12d5bfdcfa188b7672d1.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net: ti: icssg-prueth: add missing depsGuillaume La Roque
Add missing dependency on NET_SWITCHDEV. Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240708-net-deps-v2-1-b22fb74da2a3@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net: phy: microchip: lan937x: add support for 100BaseTX PHYOleksij Rempel
Add support of 100BaseTX PHY build in to LAN9371 and LAN9372 switches. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240706154201.1456098-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-09net: tn40xx: add per queue netdev-genl stats supportFUJITA Tomonori
Add support for the netdev-genl per queue stats API. ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump qstats-get --json '{"scope":"queue"}' [{'ifindex': 4, 'queue-id': 0, 'queue-type': 'rx', 'rx-alloc-fail': 0, 'rx-bytes': 266613, 'rx-packets': 3325}, {'ifindex': 4, 'queue-id': 0, 'queue-type': 'tx', 'tx-bytes': 142823367, 'tx-packets': 2387}] Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240706064324.137574-1-fujita.tomonori@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-08net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on ↵Bartosz Golaszewski
sa8775p-ride-r3 On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at the time of the DMA reset. We can however extract the RX clock from the internal SERDES block. Once the link is up, we can revert to the previous state. The AQR115C PHY doesn't support in-band signalling so we can count on getting the link up notification and safely reuse existing callbacks which are already used by another HW quirk workaround which enables the functional clock to avoid a DMA reset due to timeout. Only enable loopback on revision 3 of the board - check the phy_mode to make sure. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-08net: stmmac: qcom-ethqos: add support for 2.5G BASEX modeBartosz Golaszewski
Add support for 2.5G speed in 2500BASEX mode to the QCom ethqos driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240703181500.28491-2-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-08net: dsa: microchip: lan9371/2: update MAC capabilities for port 4Oleksij Rempel
Set proper MAC capabilities for port 4 on LAN9371 and LAN9372 switches with integrated 100BaseTX PHY. And introduce the is_lan937x_tx_phy() function to reuse it where applicable. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacksKory Maincent (Dent Project)
This patch expands PSE callbacks with newly introduced pi_get/set_current_limit() and pi_get_voltage() callback. It also add the power limit ranges description in the status returned. The only way to set ps692x0 port power limit is by configure the power class plus a small power supplement which maximum depends on each class. Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-7-320003204264@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: pse-pd: Add new power limit get and set c33 featuresKory Maincent (Dent Project)
This patch add a way to get and set the power limit of a PSE PI. For that it uses regulator API callbacks wrapper like get_voltage() and get/set_current_limit() as power is simply V * I. We used mW unit as defined by the IEEE 802.3-2022 standards. set_current_limit() uses the voltage return by get_voltage() and the desired power limit to calculate the current limit. get_voltage() callback is then mandatory to set the power limit. get_current_limit() callback is by default looking at a driver callback and fallback to extracting the current limit from _pse_ethtool_get_status() if the driver does not set its callback. We prefer let the user the choice because ethtool_get_status return much more information than the current limit. expand pse status with c33_pw_limit_ranges to return the ranges available to configure the power limit. Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-4-320003204264@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: pse-pd: pd692x0: Expand ethtool status messageKory Maincent (Dent Project)
This update expands pd692x0_ethtool_get_status() callback with newly introduced details such as the detected class, current power delivered, and extended state information. Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-3-320003204264@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: ethernet: mtk_eth_soc: implement .{get,set}_pauseparam ethtool opsDaniel Golle
Implement operations to get and set flow-control link parameters. Both is done by simply calling phylink_ethtool_{get,set}_pauseparam(). Fix whitespace in mtk_ethtool_ops while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Link: https://patch.msgid.link/e3ece47323444631d6cb479f32af0dfd6d145be0.1720088047.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: ethernet: mtk_ppe: Change PPE entries number to 16KShengyu Qu
MT7981,7986 and 7988 all supports 32768 PPE entries, and MT7621/MT7620 supports 16384 PPE entries, but only set to 8192 entries in driver. So incrase max entries to 16384 instead. Signed-off-by: Elad Yifee <eladwf@gmail.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/TY3P286MB261103F937DE4EEB0F88437D98DE2@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: dsa: ar9331: constify struct regmap_busJavier Carrasco
`ar9331_sw_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240703-net-const-regmap-v1-4-ff4aeceda02c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: encx24j600: constify struct regmap_bus/regmap_configJavier Carrasco
`regmap_encx24j600`, `phycfg` and `phymap_encx24j600` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-net-const-regmap-v1-3-ff4aeceda02c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: ti: icss-iep: constify struct regmap_configJavier Carrasco
`am654_icss_iep_regmap_config` is only assigned to a pointer that passes the data as read-only. Add the const modifier to the struct and pointer to move the data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240703-net-const-regmap-v1-2-ff4aeceda02c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: dsa: qca8k: constify struct regmap_configJavier Carrasco
`qca8k_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240703-net-const-regmap-v1-1-ff4aeceda02c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05tun: Assign missing bpf_net_context.Sebastian Andrzej Siewior
During the introduction of struct bpf_net_context handling for XDP-redirect, the tun driver has been missed. Jakub also pointed out that there is another call chain to do_xdp_generic() originating from netif_receive_skb() and drivers may use it outside from the NAPI context. Set the bpf_net_context before invoking BPF XDP program within the TUN driver. Set the bpf_net_context also in do_xdp_generic() if a xdp program is available. Reported-by: syzbot+0b5c75599f1d872bea6f@syzkaller.appspotmail.com Reported-by: syzbot+5ae46b237278e2369cac@syzkaller.appspotmail.com Reported-by: syzbot+c1e04a422bbc0f0f2921@syzkaller.appspotmail.com Fixes: 401cb7dae8130 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20240704144815.j8xQda5r@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: ethernet: mediatek: Allow gaps in MAC allocationDaniel Golle
Some devices with MediaTek SoCs don't use the first but only the second MAC in the chip. Especially with MT7981 which got a built-in 1GE PHY connected to the second MAC this is quite common. Make sure to reset and enable PSE also in those cases by skipping gaps using 'continue' instead of aborting the loop using 'break'. Fixes: dee4dd10c79a ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs") Suggested-by: Elad Yifee <eladwf@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/379ae584cea112db60f4ada79c7e5ba4f3364a64.1719862038.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05net: stmmac: Add DW XPCS specified via "pcs-handle" supportSerge Semin
Recently the DW XPCS DT-bindings have been introduced and the DW XPCS driver has been altered to support the DW XPCS registered as a platform device. In order to have the DW XPCS DT-device accessed from the STMMAC driver let's alter the STMMAC PCS-setup procedure to support the "pcs-handle" property containing the phandle reference to the DW XPCS device DT-node. The respective fwnode will be then passed to the xpcs_create_fwnode() function which in its turn will create the DW XPCS descriptor utilized in the main driver for the PCS-related setups. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: stmmac: Create DW XPCS device with particular addressSerge Semin
Currently the only STMMAC platform driver using the DW XPCS code is the Intel mGBE device driver. (It can be determined by finding all the drivers having the stmmac_mdio_bus_data::has_xpcs flag set.) At the same time the low-level platform driver masks out the DW XPCS MDIO-address from being auto-detected as PHY by the MDIO subsystem core. Seeing the PCS MDIO ID is known the procedure of the DW XPCS device creation can be simplified by dropping the loop over all the MDIO IDs. From now the DW XPCS device descriptor will be created for the MDIO-bus address pre-defined by the platform drivers via the stmmac_mdio_bus_data::pcs_mask field. Note besides this shall speed up a bit the Intel mGBE probing. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Add fwnode-based descriptor creation methodSerge Semin
It's now possible to have the DW XPCS device defined as a standard platform device for instance in the platform DT-file. Although that functionality is useless unless there is a way to have the device found by the client drivers (STMMAC/DW *MAC, NXP SJA1105 Eth Switch, etc). Provide such ability by means of the xpcs_create_fwnode() method. It needs to be called with the device DW XPCS fwnode instance passed. That node will be then used to find the MDIO-device instance in order to create the DW XPCS descriptor. Note the method semantics and name is similar to what has been recently introduced in the Lynx PCS driver. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Add Synopsys DW xPCS platform device driverSerge Semin
Synopsys DesignWare XPCS IP-core can be synthesized with the device CSRs being accessible over the MCI or APB3 interface instead of the MDIO bus (see the CSR_INTERFACE HDL parameter). Thus all the PCS registers can be just memory mapped and be a subject of the standard MMIO operations of course taking into account the peculiarities of the Clause C45 CSRs mapping. From that perspective the DW XPCS devices would look as just normal platform devices for the kernel. On the other hand in order to have the DW XPCS devices handled by the pcs-xpcs.c driver they need to be registered in the framework of the MDIO-subsystem. So the suggested change is about providing a DW XPCS platform device driver registering a virtual MDIO-bus with a single MDIO-device representing the DW XPCS device. DW XPCS platform device is supposed to be described by the respective compatible string "snps,dw-xpcs" (or with the PMA-specific compatible string), CSRs memory space and optional peripheral bus and reference clock sources. Depending on the INDIRECT_ACCESS IP-core synthesize parameter the memory-mapped reg-space can be represented as either directly or indirectly mapped Clause 45 space. In the former case the particular address is determined based on the MMD device and the registers offset (5 + 16 bits all together) within the device reg-space. In the later case there is only 8 lower address bits are utilized for the registers mapping (255 CSRs). The upper bits are supposed to be written into the respective viewport CSR in order to select the respective MMD sub-page. Note, only the peripheral bus clock source is requested in the platform device probe procedure. The core and pad clocks handling has been implemented in the framework of the xpcs_create() method intentionally since the clocks-related setups are supposed to be performed later, during the DW XPCS main configuration procedures. (For instance they will be required for the DW Gen5 10G PMA configuration.) Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Introduce DW XPCS info structureSerge Semin
The being introduced structure will preserve the PCS and PMA IDs retrieved from the respective DW XPCS MMDs or potentially pre-defined by the client drivers. (The later change will be introduced later in the framework of the commit adding the memory-mapped DW XPCS devices support.) The structure fields are filled in in the xpcs_get_id() function, which used to be responsible for the PCS Device ID getting only. Besides of the PCS ID the method now fetches the PMA/PMD IDs too from MMD 1, which used to be done in xpcs_dev_flag(). The retrieved PMA ID will be from now utilized for the PMA-specific tweaks like it was introduced for the Wangxun TxGBE PCS in the commit f629acc6f210 ("net: pcs: xpcs: support to switch mode for Wangxun NICs"). Note 1. The xpcs_get_id() error-handling semantics has been changed. From now the error number will be returned from the function. There is no point in the next IOs or saving 0xffs and then looping over the actual device IDs if device couldn't be reached. -ENODEV will be returned if the very first IO operation failed thus indicating that no device could be found. Note 2. The PCS and PMA IDs macros have been converted to enum'es. The enum'es will be populated later in another commit with the virtual IDs identifying the DW XPCS devices which have some platform-specifics, but have been synthesized with the default PCS/PMA ID. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Convert xpcs_compat to dw_xpcs_compatSerge Semin
The xpcs_compat structure has been left as the only dw-prefix-less structure since the previous commit. Let's unify at least the structures naming in the driver by adding the dw_-prefix to it. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Convert xpcs_id to dw_xpcs_descSerge Semin
A structure with the PCS/PMA MMD IDs data is being introduced in one of the next commits. In order to prevent the names ambiguity let's convert the xpcs_id structure name to dw_xpcs_desc. The later version is more suitable since the structure content is indeed the device descriptor containing the data and callbacks required for the driver to correctly set the device up. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Split up xpcs_create() body to sub-functionsSerge Semin
As an initial preparation before adding the fwnode-based DW XPCS device support let's split the xpcs_create() function code up to a set of the small sub-functions. Thus the xpcs_create() implementation will get to look simpler and turn to be more coherent. Further updates will just touch the new sub-functions a bit: add platform-specific device info, add the reference clock getting and enabling. The xpcs_create() method will now contain the next static methods calls: xpcs_create_data() - create the DW XPCS device descriptor, pre-initialize it' fields and increase the mdio device refcount-er; xpcs_init_id() - find XPCS ID instance and save it in the device descriptor; xpcs_init_iface() - find MAC/PCS interface descriptor and perform basic initialization specific to it: soft-reset, disable polling. The update doesn't imply any semantic change but merely makes the code looking simpler and more ready for adding new features support. Note the xpcs_destroy() has been moved to being defined below the xpcs_create_mdiodev() function as the driver now implies having the protagonist-then-antagonist functions definition order. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05net: pcs: xpcs: Move native device ID macro to linux/pcs/pcs-xpcs.hSerge Semin
One of the next commits will alter the DW XPCS driver to support setting a custom device ID for the particular MDIO-device detected on the platform. The generic DW XPCS ID can be used as a custom ID as well in case if the DW XPCS-device was erroneously synthesized with no or some undefined ID. In addition to that having all supported DW XPCS device IDs defined in a single place will improve the code maintainability and readability. Note while at it rename the macros to being shorter and looking alike to the already defined NXP XPCS ID macro. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h 219343755eae ("net: phy: aquantia: add missing include guards") 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") drivers/net/ethernet/wangxun/libwx/wx_hw.c bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx") b501d261a5b3 ("net: txgbe: add FDIR ATR support") https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/ include/linux/mlx5/mlx5_ifc.h 048a403648fc ("net/mlx5: IFC updates for changing max EQs") 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/ Adjacent changes: drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c 4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference") 3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard") include/net/mac80211.h 816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP") 5a009b42e041 ("wifi: mac80211: track changes in AP's TPE") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04crypto: caam: Unembed net_dev structure in dpaa2Breno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct dpaa2_caam_priv_per_cpu by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at dpaa2_dpseci_setup(). The free of the device occurs at dpaa2_dpseci_disable(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240702185557.3699991-5-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04crypto: caam: Unembed net_dev structure from qiBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct caam_qi_pcpu_priv by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at caam_qi_init(). The free of the device occurs at caam_qi_shutdown(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240702185557.3699991-4-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04crypto: caam: Make CRYPTO_DEV_FSL_CAAM dependent of COMPILE_TESTBreno Leitao
As most of the drivers that depend on ARCH_LAYERSCAPE, make CRYPTO_DEV_FSL_CAAM depend on COMPILE_TEST for compilation and testing. # grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l 29 Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240702185557.3699991-3-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04crypto: caam: Avoid unused imx8m_machine_match variableBreno Leitao
If caam module is built without OF support, the compiler returns the following warning: drivers/crypto/caam/ctrl.c:83:34: warning: 'imx8m_machine_match' defined but not used [-Wunused-const-variable=] imx8m_machine_match is only referenced by of_match_node(), which is set to NULL if CONFIG_OF is not set, as of commit 5762c20593b6b ("dt: Add empty of_match_node() macro"): #define of_match_node(_matches, _node) NULL Do not create imx8m_machine_match if CONFIG_OF is not set. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407011309.cpTuOGdg-lkp@intel.com/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240702185557.3699991-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04Merge tag 'net-6.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, wireless and netfilter. There's one fix for power management with Intel's e1000e here, Thorsten tells us there's another problem that started in v6.9. We're trying to wrap that up but I don't think it's blocking. Current release - new code bugs: - wifi: mac80211: disable softirqs for queued frame handling - af_unix: fix uninit-value in __unix_walk_scc(), with the new garbage collection algo Previous releases - regressions: - Bluetooth: - qca: fix BT enable failure for QCA6390 after warm reboot - add quirk to ignore reserved PHY bits in LE Extended Adv Report, abused by some Broadcom controllers found on Apple machines - wifi: wilc1000: fix ies_len type in connect path Previous releases - always broken: - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(), avoid premature timeouts - net: make sure skb_datagram_iter maps fragments page by page, in case we somehow get compound highmem mixed in - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more queues are used Misc: - MAINTAINERS: Remembering Larry Finger" * tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) bnxt_en: Fix the resource check condition for RSS contexts mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file inet_diag: Initialize pad field in struct inet_diag_req_v2 tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO. selftests: make order checking verbose in msg_zerocopy selftest selftests: fix OOM in msg_zerocopy selftest ice: use proper macro for testing bit ice: Reject pin requests with unsupported flags ice: Don't process extts if PTP is disabled ice: Fix improper extts handling selftest: af_unix: Add test case for backtrack after finalising SCC. af_unix: Fix uninit-value in __unix_walk_scc() bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() net: rswitch: Avoid use-after-free in rswitch_poll() netfilter: nf_tables: unconditionally flush pending work before notifier wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference wifi: iwlwifi: mvm: avoid link lookup in statistics wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK wifi: wilc1000: fix ies_len type in connect path ...
2024-07-04Merge tag 's390-6.10-8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates * tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer s390/vfio_ccw: Fix target addresses of TIC CCWs s390: Update defconfigs
2024-07-04Merge tag 'platform-drivers-x86-v6.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: - Fix regression in toshiba_acpi introduced in 6.10-rc1 * tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: toshiba_acpi: Fix quickstart quirk handling
2024-07-04bnxt_en: Fix the resource check condition for RSS contextsPavan Chebbi
While creating a new RSS context, bnxt_rfs_capable() currently makes a strict check to see if the required VNICs are already available. If the current VNICs are not what is required, either too many or not enough, it will call the firmware to reserve the exact number required. There is a bug in the firmware when the driver tries to relinquish some reserved VNICs and RSS contexts. It will cause the default VNIC to lose its RSS configuration and cause receive packets to be placed incorrectly. Workaround this problem by skipping the resource reduction. The driver will not reduce the VNIC and RSS context reservations when a context is deleted. The resources will be available for use when new contexts are created later. Potentially, this workaround can cause us to run out of VNIC and RSS contexts if there are a lot of VF functions creating and deleting RSS contexts. In the future, we will conditionally disable this workaround when the firmware fix is available. Fixes: 438ba39b25fe ("bnxt_en: Improve RSS context reservation infrastructure") Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI ↵Aleksandr Mishin
file In case of invalid INI file mlxsw_linecard_types_init() deallocates memory but doesn't reset pointer to NULL and returns 0. In case of any error occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init() calls mlxsw_linecard_types_fini() which performs memory deallocation again. Add pointer reset to NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-05-15 20:43:08 +0000