| Age | Commit message (Collapse) | Author |
|---|
|
Add I2C driver for InvenSense ICM-426xxx devices.
Configure bus signal slew rates as indicated in the datasheet.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Core component of a new driver for InvenSense ICM-426xx devices.
It includes registers definition, main probe/setup, and device
utility functions.
ICM-426xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 2K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a common function used for read_raw callback for both PMIC5
and PMIC7 ADCs.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the ability to also support access via (triggered) buffers
next to the existing direct mode.
Device in question is the Odroid Go Advance that connects a joystick
to two of the saradc channels for X and Y axis and the new (and still
pending) adc joystick driver of course wants to use triggered buffers
from the iio subsystem.
Signed-off-by: Simon Xue <xxm@rock-chips.com>
[some simplifications and added commit description]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
As suggested give the current ADC_CHANNEL constant a distinct
and consistent prefix.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Parts of the saradc probe rely on devm functions and later parts do not.
This makes it more difficult to for example enable triggers via their
devm-functions and would need more undo-work in remove.
So to make life easier for the driver, move the rest of probe calls
also to their devm-equivalents.
This includes moving the clk- and regulator-disabling to a devm_action
so that they gets disabled both during remove and in the error case
in probe, after the action is registered.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.
At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.
This patch removes all explicit calls of iio_triggered_buffer_postenable()
& iio_triggered_buffer_predisable() in all drivers, since the core handles
now the pollfunc attach/detach.
The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's
not immediately obvious that removing the hooks doesn't break anything.
Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board.
All seems to be fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.
For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.
For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix typo: "tigger" --> "trigger"
Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If a driver does not assign an of_node to a IIO device to IIO core will
automatically assign the of_node of the parent device. This automatic
assignment is done in the iio_device_register() function.
There is a fair amount of drivers that currently manually assign the
of_node of the IIO device. All but 4 of them can make use of the automatic
assignment though.
The exceptions are:
* mxs-lradc-adc: Which uses the of_node of the parent of the parent.
* stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node
assigned to the IIO device before iio_device_register() is called.
All other drivers are updated to use automatic assignment. This reduces
the amount of boilerplate code involved in setting up the IIO device.
The patch has mostly been auto-generated with the following semantic patch
// <smpl>
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(&parent, ...)
...
-indio_dev->dev.of_node = parent.of_node;
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(parent, ...)
...
-indio_dev->dev.of_node = parent->of_node;
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This assignment is the more peculiar as it assigns the parent of the
platform-device's device (i.e. pdev->dev.parent) as the IIO device's
parent.
Since the devm_iio_device_alloc() [now] assigns the device argument as the
default parent (and since this is the more common case), for cases
where the parent needs to be different, the iio_device_set_parent helper
should be used.
That makes things a bit more obvious about the new behavior of
devm_iio_device_alloc() and makes it clearer that iio_device_set_parent()
should be used.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These were obtained by doing a 'git diff | grep \/\*', in the previous diff
to find comments. These needed a bit more manual review, as the semantic
patch isn't great for catching these.
The result is:
/* Initialize Counter device and driver data */
/* Initialize IIO device */
/* Establish that the iio_dev is a child of the spi device */
/* Estabilish that the iio_dev is a child of the spi device */
/* Initiate the Industrial I/O device */
/* Establish that the iio_dev is a child of the device */
- /* establish that the iio_dev is a child of the i2c device */
- /* establish that the iio_dev is a child of the i2c device */
/* This is only used for removal purposes */
/* setup the industrialio driver allocated elements */
/* variant specific configuration */
/* Setup for userspace synchronous on demand sampling. */
st->readback_delay_us += 5; /* Add tWAIT */
- /* Establish that the iio_dev is a child of the i2c device */
/* Establish that the iio_dev is a child of the i2c device */
Out of which, 4 are really left-over comments about parent assignment.
3 of them are removed by the semantic patch, as the comment removed (by
spatch) would be for an empty line.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The change passes the parent device to the iio_device_alloc() call. This
also updates the devm_iio_device_alloc() call to consider the device object
as the parent device by default.
Having it passed like this, should ensure that any IIO device object
already has a device object as parent, allowing for neater control, like
passing the 'indio_dev' object for other stuff [like buffers/triggers/etc],
and potentially creating iiom_xxx(indio_dev) functions.
With this patch, only the 'drivers/platform/x86/toshiba_acpi.c' needs an
update to pass the parent object as a parameter.
In the next patch all devm_iio_device_alloc() calls will be handled.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
missed check
Since if there is no GPIO, nothing happens, replace devm_gpiod_get()
with devm_gpiod_get_optional().
Also add IS_ERR() to fix the missing-check warning.
Fixes: cee211f4e5a0 ("iio: amplifiers: ad8366: Add support for the ADA4961 DGA")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since changes can come from all sort of places, it may make sense to have
this symbol as a dependency to make sure that the 'make allmodconfig' &&
'make allyesconfig' build rules cover this driver as well for a
compile-build/test.
It seemed useful [recently] when trying to apply a change for this.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.
For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This was partially removed when the mlock cleanup was done. Only one more
call is left in the ad5592r_alloc_channels() function.
This one is simple. We just need to pass the iio_dev object and get the
state via iio_priv().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add mount-matrix binding support. As chip could have different orientations
a mount matrix support is needed to correctly translate these differences.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add vdd-supply and vddio-supply support.
While working on an msm8916 device and having explicit declarations for
regulators, without setting these regulators to regulators-always-on it
happened those lines weren't ready because they could have been controlled
by other components, causing failure in module's probe.
This patch aim is to solve this situation by adding regulators control
during bmi160_chip_init() and bmi160_chip_uninit(), assuring power to
this component.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix a typo in MODULE_AUTHOR() argument.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
EC does not currently preserve range across sensor reinit.
If sensor is powered down at suspend, it will default to the EC default
range at resume, not the range set by the host.
Save range if modified, and apply at resume.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The mxc6655 is fully working with the existing mxc4005 driver.
Add support for it.
Signed-off-by: Christian Oder <me@myself5.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
mmc35240_reg_defaults is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
9759 3288 128 13175 3377 drivers/iio/magnetometer/mmc35240.o
After:
text data bss dec hex filename
9823 3224 128 13175 3377 drivers/iio/magnetometer/mmc35240.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
stk3310_regmap_config is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
16027 5424 128 21579 544b drivers/iio/light/stk3310.o
After:
text data bss dec hex filename
16347 5104 128 21579 544b drivers/iio/light/stk3310.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad5592r_ext_info is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
13293 2088 256 15637 3d15 drivers/iio/dac/ad5592r-base.o
After:
text data bss dec hex filename
13421 1960 256 15637 3d15 drivers/iio/dac/ad5592r-base.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad5380_ext_info is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
12060 3280 192 15532 3cac drivers/iio/dac/ad5380.o
After:
text data bss dec hex filename
12252 3088 192 15532 3cac drivers/iio/dac/ad5380.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
max11100_channels is not modified and can therefore be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
3776 1168 0 4944 1350 drivers/iio/adc/max11100.o
After:
text data bss dec hex filename
3968 976 0 4944 1350 drivers/iio/adc/max11100.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
According to AK09911 datasheet, if reset gpio is provided then
deassert reset on ak8975_power_on() and assert reset on ak8975_power_off().
Without reset's deassertion during ak8975_power_on(), driver's probe fails
on ak8975_who_i_am() while checking for device identity for AK09911 chip.
AK09911 has an active low reset gpio to handle register's reset.
AK09911 datasheet says that, if not used, reset pin should be connected
to VID. This patch emulates this situation.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Minor comment style edits.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change pr_err/pr_debug statements to dev_err/dev_dbg for
increased clarity.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Clean up some return value checks to make code more compact.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADC architecture on PMIC7 is changed as compared to PMIC5. The
major change from PMIC5 is that all SW communication to ADC goes through
PMK8350, which communicates with other PMICs through PBS when the ADC
on PMK8350 works in master mode. The SID register is used to identify the
PMICs with which the PBS needs to communicate. Add support for the same.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add info property under adc_data to support adding ADC variants
which may use different iio_info than the one defined for PMIC5.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add basic support for the Bosch Sensortec BMA400 3-axes ultra-low power
accelerometer when configured to use SPI.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move ret variable to the IIO_CHAN_INFO_RAW switch since currently
only used within that scope.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, removing the iio_priv_to_dev() helper means passing the
iio_dev object on hts221_allocate_buffers() & hts221_allocate_trigger().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, removing iio_priv_to_dev() also means keeping a reference
on the state struct.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, removing iio_priv_to_dev() means keeping a reference
on the state struct.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, it implies passing the IIO device on the i2c client
private data. The implementation of iio_priv() will not be affected by the
rework/hiding of iio_priv_to_dev().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
"The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
which relies on compile-time instrumentation, and uses a
watchpoint-based sampling approach to detect races.
The feature was under development for quite some time and has already
found legitimate bugs.
Unfortunately it comes with a limitation, which was only understood
late in the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially
the annotations of functions to exclude them from KCSAN
instrumentation correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be
found here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler
limitations and bugs again would end up in a major trainwreck, so
requiring a working compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is
manageable and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at
their bugs. Some issues with CSAN in GCC are 7 years old and one has
been 'fixed' 3 years ago with a half baken solution which 'solved' the
reported issue but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become
independent, but that's not something which will show up in a few
days.
Blocking KCSAN until wide spread compiler support is available is not
a really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support"
* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
compiler.h: Move function attributes to compiler_types.h
compiler.h: Avoid nested statement expression in data_race()
compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
kcsan: Update Documentation to change supported compilers
kcsan: Remove 'noinline' from __no_kcsan_or_inline
kcsan: Pass option tsan-instrument-read-before-write to Clang
kcsan: Support distinguishing volatile accesses
kcsan: Restrict supported compilers
kcsan: Avoid inserting __tsan_func_entry/exit if possible
ubsan, kcsan: Don't combine sanitizer with kcov on clang
objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
kcsan: Add __kcsan_{enable,disable}_current() variants
checkpatch: Warn about data_race() without comment
kcsan: Use GFP_ATOMIC under spin lock
Improve KCSAN documentation a bit
kcsan: Make reporting aware of KCSAN tests
kcsan: Fix function matching in report
kcsan: Change data_race() to no longer require marking racing accesses
kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
...
|
|
Pull updates from Andrew Morton:
"A few fixes and stragglers.
Subsystems affected by this patch series: mm/memory-failure, ocfs2,
lib/lzo, misc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
amdgpu: a NULL ->mm does not mean a thread is a kthread
lib/lzo: fix ambiguous encoding bug in lzo-rle
ocfs2: fix build failure when TCP/IP is disabled
mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread
mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill
|
|
Use the proper API instead.
Fixes: 70539bd795002 ("drm/amd: Update MEC HQD loading code for KFD")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200404094101.672954-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"Some followup fixes for this merge window. In particular:
- Seqcount write missing preemption disable for stats (Ahmed)
- blktrace fixes (Chaitanya)
- Redundant initializations (Colin)
- Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max,
Niklas, Rikard)
- loop flag bug regression fix (Martijn)
- blk-mq tagging fixes (Christoph, Ming)"
* tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block:
umem: remove redundant initialization of variable ret
pktcdvd: remove redundant initialization of variable ret
nvmet: fail outstanding host posted AEN req
nvme-pci: use simple suspend when a HMB is enabled
nvme-fc: don't call nvme_cleanup_cmd() for AENs
nvmet-tcp: constify nvmet_tcp_ops
nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops
nvme: do not call del_gendisk() on a disk that was never added
blk-mq: fix blk_mq_all_tag_iter
blk-mq: split out a __blk_mq_get_driver_tag helper
blktrace: fix endianness for blk_log_remap()
blktrace: fix endianness in get_pdu_int()
blktrace: use errno instead of bi_status
block: nr_sects_write(): Disable preemption on seqcount write
block: remove the error argument to the block_bio_complete tracepoint
loop: Fix wrong masking of status flags
block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
|
|
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Kconfig select statements are now sorted alphanumerically
- first-level interrupts are now handled via a full irqchip driver
- CPU hotplug is fixed
- vDSO calls now use the common vDSO infrastructure
* tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: set the permission of vdso_data to read-only
riscv: use vDSO common flow to reduce the latency of the time-related functions
riscv: fix build warning of missing prototypes
RISC-V: Don't mark init section as non-executable
RISC-V: Force select RISCV_INTC for CONFIG_RISCV
RISC-V: Remove do_IRQ() function
clocksource/drivers/timer-riscv: Use per-CPU timer interrupt
irqchip: RISC-V per-HART local interrupt controller driver
RISC-V: Rename and move plic_find_hart_id() to arch directory
RISC-V: self-contained IPI handling routine
RISC-V: Sort select statements alphanumerically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"arm64 fixes that came in during the merge window.
There will probably be more to come, but it doesn't seem like it's
worth me sitting on these in the meantime.
- Fix SCS debug check to report max stack usage in bytes as advertised
- Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS
- Fix incorrect mask in HiSilicon L3C perf PMU driver
- Fix compat vDSO compilation under some toolchain configurations
- Fix false UBSAN warning from ACPI IORT parsing code
- Fix booting under bootloaders that ignore TEXT_OFFSET
- Annotate debug initcall function with '__init'"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: warn on incorrect placement of the kernel by the bootloader
arm64: acpi: fix UBSAN warning
arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO
drivers/perf: hisi: Fix wrong value for all counters enable
arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
arm64: debug: mark a function as __init to save some memory
scs: Report SCS usage in bytes rather than number of entries
|
