summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-27Merge tag 'linux-can-next-for-5.12-20210127' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-01-27 The first two patches are by me and fix typos on the CAN gw protocol and the flexcan driver. The next patch is by Vincent Mailhol and targets the CAN driver infrastructure, it exports the function that converts the CAN state into a human readable string. A patch by me, which target the CAN driver infrastructure, too, makes the calculation in can_fd_len2dlc() more readable. A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver. The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces several hardcoded assumptions when calling regmap, by using regmap_get_val_bytes(). The remaining patches are by me. First an open coded check is replaced by an existing helper function, then in the TX path the padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR frame handling in the RX and TX path. Then support for len8_dlc is added. The last patch adds BQL support. * tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: add BQL support can: mcp251xfd: add len8_dlc support can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap can: mcba_usb: remove h from printk format specifier can: length: can_fd_len2dlc(): make legnth calculation readable again can: dev: export can_get_state_str() function can: flexcan: fix typos can: gw: fix typo ==================== Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27rocker: Simplify the calculation of variablesJiapeng Zhong
Fix the following coccicheck warnings: ./drivers/net/ethernet/rocker/rocker_ofdpa.c:926:34-36: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1611648783-3916-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27r8169: remove not needed call to rtl_wol_enable_rx from rtl_shutdownHeiner Kallweit
rtl_wol_enable_rx() is called via the following call chain if WoL is enabled: rtl8169_down() -> rtl_prepare_power_down() -> rtl_wol_enable_rx() Therefore we don't have to call this function here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/34ce78e2-596c-e2ac-16aa-c550fa624c22@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27can: mcp251xfd: add BQL supportMarc Kleine-Budde
This patch adds BQL support to the driver. Support for netdev_xmit_more() will be added in a separate patch series. Link: https://lore.kernel.org/r/20210114153448.1506901-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: add len8_dlc supportMarc Kleine-Budde
This patch adds support for the Classical CAN raw DLC functionality to send and receive DLC values from 9 ... 15 to the mcp251xfd driver. Link: https://lore.kernel.org/r/20210114153448.1506901-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN ↵Marc Kleine-Budde
frames in TX-path In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may have a dlc != 0, but contain no data. This patch optimizes the TX-path to not copy any data for RTR frames. Link: https://lore.kernel.org/r/20210114153448.1506901-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN ↵Marc Kleine-Budde
frames in RX-path In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may have a dlc != 0, but contain no data. This patch changes the RX-path to no copy any data for RTR frames, so that the data field in the CAN frame stays 0x0. Link: https://lore.kernel.org/r/20210114153448.1506901-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD framesMarc Kleine-Budde
CAN-FD frames have only specific frame length (0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64). A CAN-FD frame provided by user space might not cover the whole CAN-FD frame. To avoid sending garbage over the CAN bus the driver pads the CAN frame with 0x0 (if MCP251XFD_SANITIZE_CAN is activated). This patch cleans up the pad len calculation. Rounding to full u32 brings no benefit, in case of CRC transfers, the hw_tx_obj->data is not aligned to u32 anyway. Link: https://lore.kernel.org/r/20210114153448.1506901-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check ↵Marc Kleine-Budde
TX is is full This patch replaces an open coded check if the TX ring is full by a check if mcp251xfd_get_tx_free() returns 0. Link: https://lore.kernel.org/r/20210114153448.1506901-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcp251xfd: replace sizeof(u32) with val_bytes in regmapSu Yanjun
The sizeof(u32) is hardcoded. It's better to use the config value from the regmap. It increases the size of target object, but it's flexible when new mcp chip need other val_bytes. Link: https://lore.kernel.org/r/20210122081334.213957-1-suyanjun218@gmail.com Signed-off-by: Su Yanjun <suyanjun218@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcba_usb: remove h from printk format specifierTom Rix
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Link: https://lore.kernel.org/r/20210124150916.1920434-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: length: can_fd_len2dlc(): make legnth calculation readable againMarc Kleine-Budde
In commit 652562e5ff06 ("can: length: can_fd_len2dlc(): simplify length calculcation") the readability of the code degraded and became more error prone. To counteract this, partially convert that patch and replace open coded values (of the original code) with proper defines. Fixes: 652562e5ff06 ("can: length: can_fd_len2dlc(): simplify length calculcation") Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210118201346.79422-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: dev: export can_get_state_str() functionVincent Mailhol
The can_get_state_str() function is also relevant to the drivers. Export the symbol and make it visible in the can/dev.h header. Link: https://lore.kernel.org/r/20210119170355.12040-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: flexcan: fix typosMarc Kleine-Budde
This patch fixes two typos found by codespell. Fixes: 812f0116c66a ("can: flexcan: add CAN wakeup function for i.MX8QM") Link: https://lore.kernel.org/r/20210127085529.2768537-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-26net: usbnet: use new tasklet APIEmil Renner Berthing
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: usbnet: initialize tasklet using tasklet_initEmil Renner Berthing
Initialize tasklet using tasklet_init() rather than open-coding it. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: dsa: mv88e6xxx: use mv88e6185_g1_vtu_loadpurge() for the 6250Rasmus Villemoes
Apart from the mask used to get the high bits of the fid, mv88e6185_g1_vtu_loadpurge() and mv88e6250_g1_vtu_loadpurge() are identical. Since the entry->fid passed in should never exceed the number of databases, we can simply use the former as-is as replacement for the latter. Suggested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: dsa: mv88e6xxx: use mv88e6185_g1_vtu_getnext() for the 6250Rasmus Villemoes
mv88e6250_g1_vtu_getnext is almost identical to mv88e6185_g1_vtu_getnext, except for the 6250 only having 64 databases instead of 256. We can reduce code duplication by simply masking off the extra two garbage bits when assembling the fid from VTU op [3:0] and [11:8]. Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bonding: add TLS dependencyArnd Bergmann
When TLS is a module, the built-in bonding driver may cause a link error: x86_64-linux-ld: drivers/net/bonding/bond_main.o: in function `bond_start_xmit': bond_main.c:(.text+0xc451): undefined reference to `tls_validate_xmit_skb' Add a dependency to avoid the problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210125113209.2248522-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Convert to use netif_level() helpers.Michael Chan
Use the various netif_level() helpers to simplify the C code. This was suggested by Joe Perches. Cc: Joe Perches <joe@perches.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1611642024-3166-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26usbnet: fix the indentation of one code snippetDongliang Mu
Every line of code should start with tab (8 characters) Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210123051102.1091541-1-mudongliangabcd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25nfc: fix typowengjianfeng
change 'regster' to 'register' Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Acked-by: Mark Greer <mgreer@animalcreek.com> Link: https://lore.kernel.org/r/20210123082550.3748-1-samirweng1979@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25nfc: fdp: fix typo issuewengjianfeng
change 'paquet' to 'packet' Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Link: https://lore.kernel.org/r/20210123074835.9448-1-samirweng1979@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Do not process completion entries after fatal condition detected.Michael Chan
Once the firmware fatal condition is detected, we should cease comminication with the firmware and hardware quickly even if there are many completion entries in the completion rings. This will speed up the recovery process and prevent further I/Os that may cause further exceptions. Do not proceed in the NAPI poll function if fatal condition is detected. Call napi_complete() and return without arming interrupts. Cleanup of all rings and reset are imminent. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Consolidate firmware reset event logging.Michael Chan
Combine the three netdev_warn() calls into a single call, printed at the NETIF_MSG_HW log level. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Improve firmware fatal error shutdown sequence.Michael Chan
In the event of a fatal firmware error, firmware will notify the host and then it will proceed to do core reset when it sees that all functions have disabled Bus Master. To prevent Master Aborts and other hard errors, we need to quiesce all activities in addition to disabling Bus Master before the chip goes into core reset. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Modify bnxt_disable_int_sync() to be called more than once.Michael Chan
In the event of a fatal firmware error, we want to disable IRQ early in the recovery sequence. This change will allow it to be called safely again as part of the normal shutdown sequence. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Add a new BNXT_STATE_NAPI_DISABLED flag to keep track of NAPI state.Michael Chan
Up until now, we don't need to keep track of this state because NAPI is always enabled once and disabled once during bring up and shutdown. For better error recovery in subsequent patches, we want to quiesce the device earlier during fatal error conditions. The normal shutdown sequence will disable NAPI again and the flag will prevent disabling NAPI twice. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Add bnxt_fw_reset_timeout() helper.Michael Chan
This code to check if we have reached the maximum wait time after firmware reset is used multiple times. Add a helper function to do this. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Retry open if firmware is in reset.Vasundhara Volam
Firmware may be in the middle of reset when the driver tries to do ifup. In that case, firmware will return a special error code and the driver will retry 10 times with 50 msecs delay after each retry. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: attempt to reinitialize after aborted resetEdwin Peer
Drawing a hard line on aborted resets prevents a NIC open in some scenarios that may otherwise be recoverable. For example, if a firmware recovery happened while a PF was down and an attempt was made to bring up an associated VF in this state, then it was impossible to ever bring up this VF without a rebind or reload of its driver. Attempt to reinitialize the firmware when an aborted reset (or failed init after a reset) is discovered during open - it may succeed. Also take care to allow the user to retry opening the NIC even after an aborted reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: log firmware debug notificationsEdwin Peer
Firmware is capable of generating asynchronous debug notifications. The event data is opaque to the driver and is simply logged. Debug notifications can be enabled by turning on hardware status messages using the ethtool msglvl interface. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Add an upper bound for all firmware command timeouts.Vasundhara Volam
The timeout period for firmware messages is passed to the driver from the firmware in the response of the first command. This timeout period is multiplied by a factor for certain long running commands such as NVRAM commands. In some cases, the timeout period can become really long and it can cause hung task warnings if firmware has crashed or is not responding. To avoid such long delays, cap all firmware commands to a max timeout value of 40 seconds. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Move reading VPD info after successful handshake with fw.Vasundhara Volam
If firmware is in reset or in bad state, it won't be able to return VPD data. Move bnxt_vpd_read_info() until after bnxt_fw_init_one_p1() successfully returns. By then we would have established proper communications with the firmware. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Retry sending the first message to firmware if it is under reset.Michael Chan
The first HWRM_VER_GET message to firmware during probe may timeout if firmware is under reset. This can happen during hot-plug for example. On P5 and newer chips, we can check if firmware is in the boot stage by reading a status register. Retry 5 times if the status register shows that firmware is not ready and not in error state. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: handle CRASH_NO_MASTER during bnxt_open()Edwin Peer
Add missing support for handling NO_MASTER crashes while ports are administratively down (ifdown). On some SoC platforms, the driver needs to assist the firmware to recover from a crash via OP-TEE. This is performed in a similar fashion to what is done during driver probe. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Define macros for the various health register states.Michael Chan
Define macros to check for the various states in the lower 16 bits of the health register. Replace the C code that checks for these values with the newly defined macros. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25bnxt_en: Update firmware interface to 1.10.2.11.Michael Chan
Updates to backing store APIs, QoS profiles, and push buffer initial index support. Since the new HWRM_FUNC_BACKING_STORE_CFG message size has increased, we need to add some compat. logic to fall back to the smaller legacy size if firmware cannot accept the larger message size. The new fields added to the structure are not used yet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25net: dsa: mt7530: MT7530 optional GPIO supportDENG Qingfang
MT7530's LED controller can drive up to 15 LED/GPIOs. Add support for GPIO control and allow users to use its GPIOs by setting gpio-controller property in device tree. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25net: ethernet: mediatek: support setting MTUDENG Qingfang
MT762x HW, except for MT7628, supports frame length up to 2048 (maximum length on GDM), so allow setting MTU up to 2030. Also set the default frame length to the hardware default 1518. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210125042046.5599-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25octeontx2-af: Support ESP/AH RSS hashingSubbaraya Sundeep
Support SPI and sequence number fields of ESP/AH header to be hashed for RSS. By default ESP/AH fields are not considered for RSS and needs to be set explicitly as below: ethtool -U eth0 rx-flow-hash esp4 sdfn or ethtool -U eth0 rx-flow-hash ah4 sdfn or ethtool -U eth0 rx-flow-hash esp6 sdfn or ethtool -U eth0 rx-flow-hash ah6 sdfn To disable hashing of ESP fields: ethtool -U eth0 rx-flow-hash esp4 sd or ethtool -U eth0 rx-flow-hash ah4 sd or ethtool -U eth0 rx-flow-hash esp6 sd or ethtool -U eth0 rx-flow-hash ah6 sd Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/1611378552-13288-1-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25tg3: improve PCI VPD accessHeiner Kallweit
When working on the PCI VPD code I also tested with a Broadcom BCM95719 card. tg3 uses internal NVRAM access with this card, so I forced it to PCI VPD mode for testing. PCI VPD access fails (i + PCI_VPD_LRDT_TAG_SIZE + j > len) because only TG3_NVM_VPD_LEN (256) bytes are read, but PCI VPD has 400 bytes on this card. So add a constant TG3_NVM_PCI_VPD_MAX_LEN that defines the maximum PCI VPD size. The actual VPD size is returned by pci_read_vpd(). In addition it's not worth looping over pci_read_vpd(). If we miss the 125ms timeout per VPD dword read then definitely something is wrong, and if the tg3 module loading is killed then there's also not much benefit in retrying the VPD read. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/cb9e9113-0861-3904-87e0-d4c4ab3c8860@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: hellcreek: Add TAPRIO offloading supportKurt Kanzenbach
The switch has support for the 802.1Qbv Time Aware Shaper (TAS). Traffic schedules may be configured individually on each front port. Each port has eight egress queues. The traffic is mapped to a traffic class respectively via the PCP field of a VLAN tagged frame. The TAPRIO Qdisc already implements that. Therefore, this interface can simply be reused. Add .port_setup_tc() accordingly. The activation of a schedule on a port is split into two parts: * Programming the necessary gate control list (GCL) * Setup delayed work for starting the schedule The hardware supports starting a schedule up to eight seconds in the future. The TAPRIO interface provides an absolute base time. Therefore, periodic delayed work is leveraged to check whether a schedule may be started or not. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mhi: Set wwan device typeLoic Poulain
The 'wwan' devtype is meant for devices that require additional configuration to be used, like WWAN specific APN setup over AT/QMI commands, rmnet link creation, etc. This is the case for MHI (Modem host Interface) netdev which targets modem/WWAN endpoints. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1611328554-1414-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mvpp2: Remove unneeded Kconfig dependency.Richard Cochran
The mvpp2 is an Ethernet driver, and it implements MAC style time stamping of PTP frames. It has no need of the expensive option to enable PHY time stamping. Remove the incorrect dependency. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: mv88e6xxx: Remove bogus Kconfig dependency.Richard Cochran
The mv88e6xxx is a DSA driver, and it implements DSA style time stamping of PTP frames. It has no need of the expensive option to enable PHY time stamping. Remove the bogus dependency. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: disable IEOB interrupts before clearingAlex Elder
Currently in gsi_isr_ieob(), event ring IEOB interrupts are disabled one at a time. The loop disables the IEOB interrupt for all event rings represented in the event mask. Instead, just disable them all at once. Disable them all *before* clearing the interrupt condition. This guarantees we'll schedule NAPI for each event once, before another IEOB interrupt could be signaled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: repurpose gsi_irq_ieob_disable()Alex Elder
Rename gsi_irq_ieob_disable() to be gsi_irq_ieob_disable_one(). Introduce a new function gsi_irq_ieob_disable() that takes a mask of events to disable rather than a single event id. This will be used in the next patch. Rename gsi_irq_ieob_enable() to be gsi_irq_ieob_enable_one() to be consistent. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: have gsi_channel_update() return a valueAlex Elder
Have gsi_channel_update() return the first transaction in the updated completed transaction list, or NULL if no new transactions have been added. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: heed napi_complete() return valueAlex Elder
Pay attention to the return value of napi_complete(), completing polling only if it returns true. Just use napi rather than &channel->napi as the argument passed to napi_complete(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-05-24 05:00:49 +0000