summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-03-20wifi: ath12k: use correct flag field for 320 MHz channelsAloka Dixit
Due to an error during rebasing the patchset 320 MHz channel support got broken. ath12k was setting the QoS bit instead of the correct flag. WMI_PEER_EXT_320MHZ (0x2) is defined as an extended flag, replace peer_flags by peer_flags_ext while sending peer data. This affected both QCN9274 and WCN7850 which use the same flag. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 6734cf9b4cc7 ("wifi: ath12k: peer assoc for 320 MHz") Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314204651.11075-1-quic_alokad@quicinc.com
2024-03-20wifi: ath12k: remove duplicate definitions in wmi.hKang Yang
There are some duplicate definitions in wmi.h, remove them. No functional changes, compile tested only. Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314021830.305021-1-quic_kangyang@quicinc.com
2024-03-20wifi: ath12k: fix desc address calculation in wbm tx completionThiraviyam Mariyappan
In tx completion, status desc is obtained from offsetting the address from wbm ring. Having HTT_TX_WBM_COMP_STATUS_OFFSET(8) and reserved 8 bytes in status desc offsets the address twice and read the values from the incorrect address. Hence, remove the HTT_TX_WBM_COMP_STATUS_OFFSET from wbm completion address calculation. Also this patch is applicable for WCN7850. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240311180708.9334-1-quic_tmariyap@quicinc.com
2024-03-14wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066Kang Yang
Now that all the necessary pieces are implemented we can enable P2P support for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-7-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066Kang Yang
Current ROC scan will filter probe request. So P2P device cannot receive probe request. But it is necessary for P2P mode. A P2P device cannot be discovered if it doesn't respond to others' probe request. In addition, station won't filter probe request with common scan. But for station, there is no needed to receive probe request. Based on the above two points, change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-6-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512Kang Yang
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not enough, resize it to 512. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-5-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: implement handling of P2P NoA eventKang Yang
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to signal its absence due to power save timing, concurrent operation, or off-channel scanning. It is also used in the P2P Presence Request-Response mechanism. The NoA attribute shall be present in the P2P IE in the beacon frames transmitted by a P2P Group Owner when a NoA schedule is being advertised, or when the CTWindow is non-zero. So add support to update P2P information after P2P GO is up through event WMI_P2P_NOA_EVENTID, and always put it in probe resp. Create p2p.c and p2p.h for P2P related functions and definitions. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-4-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: add P2P IE in beacon templateKang Yang
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-3-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change interface combination for P2P modeKang Yang
Current interface combination doesn't support P2P mode. So change it for P2P mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-2-quic_kangyang@quicinc.com
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
2024-03-11wifi: ath11k: adjust a comment to reflect realityKevin Lo
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set after SOC_GLOBAL_RESET. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ZeWEqGVibkMg2APi@ns.kevlo.org
2024-03-08wifi: ath10k: poll service ready message before failingBaochen Qiang
Currently host relies on CE interrupts to get notified that the service ready message is ready. This results in timeout issue if the interrupt is not fired, due to some unknown reasons. See below logs: [76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received ... [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110 And finally it causes WLAN interface bring up failure. Change to give it one more chance here by polling CE rings, before failing directly. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Reported-by: James Prestwood <prestwoj@gmail.com> Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2 Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
2024-03-08wifi: ath11k: fix soc_dp_stats debugfs file permissionJeff Johnson
Currently the soc_dp_stats debugfs file has the following permissions: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats However this file does not actually support write operations -- no .write() method is registered. Therefore use the correct permissions when creating the file. After the change: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
2024-03-08wifi: ath11k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in ath11k, this struct is unused -- struct scan_req_params is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
2024-03-08wifi: ath12k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath12k inherited struct wmi_start_scan_arg from ath11k. However, in ath12k, this struct is unused -- struct ath12k_wmi_scan_req_arg is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath12k-obsolete-wmi_start_scan_arg-v1-1-07b0b563cb27@quicinc.com
2024-03-05Merge tag 'ath-next-20240305' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 Only some minor cleanup in ath11k and ath12k. Adding Jeff as the maintainer for ath10k, ath11k and ath12k DT bindings.
2024-03-05wifi: rtw89: wow: move release offload packet earlier for WoWLAN modeChin-Yen Lee
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake function, and it will lead to release offload packet fail because driver can't receive completion notification from firmware. We move release offload packet earlier to avoid this error. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: set security engine options for 802.11ax chips onlyChin-Yen Lee
The security engine is set for management frames by default for 802.11be chips, so no need to set it in WoWLAN flow. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-7-pkshih@realtek.com
2024-03-05wifi: rtw89: update suspend/resume for different generationChin-Yen Lee
The setting during suspend or resume is different between different generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-6-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update config mac function with different generationChin-Yen Lee
The registers to configure mac function for WoWLAN mode that are different from different generation, so update them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-5-pkshih@realtek.com
2024-03-05wifi: rtw89: update DMA function with different generationChin-Yen Lee
The register of control and polling function for TX/RX DMA is different from different generation, so update them. Also rename polling_dma function to polling_dma_idle to avoid misunderstanding. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-4-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN status register for different generationChin-Yen Lee
The statue register is for driver to check if WoWLAN mode works or stops successfully. It is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-3-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN reason register for different chipsChin-Yen Lee
The WoWLAN reason register is used for driver to get the wakeup reason for reporting to cfg80211, and it is different from chips. So put it into chip information. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-2-pkshih@realtek.com
2024-03-05wifi: brcm80211: handle pmk_op allocation failureDuoming Zhou
The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
2024-03-05wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERRChing-Te Ku
The 2 Bluetooth profiles (Hands free profile & Human interface device) have high duty transmission, it will affect the traffic of WiFi packet frequently. And once the WiFi traffic down to B/G mode, it will need a better success rate to recover the transmission rate. Add new policy option to solve the above situation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-9-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: When Bluetooth not available don't set power/gainChing-Te Ku
If Bluetooth is working, it will update their info regularly. And the code will increase the counters while the info updating. Use this counter to judge is Bluetooth working or not. Don't need to set Bluetooth power or gain when it is not working. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-8-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add return value to ensure H2C command is success or notChing-Te Ku
Add return value to H2C function, and only record down the value while H2C command success, this can help us to check the real time status. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-7-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: Reorder H2C command index to align with firmwareChing-Te Ku
Wi-Fi firmware need some driver information to do decision or do some real-time control. Driver will update these information by H2C command. The chip 8922a H2C command index is different from before chips/branch, so need to assign the correct index to let firmware parsing. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-6-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add BTC ctrl_info version 7 and related logicChing-Te Ku
Change structure member from bit field to normal variable to reduce unnecessary translation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-5-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add init_info H2C command format version 7Ching-Te Ku
To avoid using bit fields for H2C command, rearrange the structure. And also patch the corresponding code for the using of this structure. No logic changes for existing chips. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-4-pkshih@realtek.com
2024-03-05wifi: rtw89: 8922a: add coexistence helpers of SW grantPing-Ke Shih
Under some circumstances, coexistence mechanism want to keep grant BT or WiFi, such as inquiry and WiFi is connecting, to ensure BT or WiFi can transmit or receive data in that period. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-3-pkshih@realtek.com
2024-03-05wifi: rtw89: mac: add coexistence helpers {cfg/get}_pltPing-Ke Shih
When hardware grant BT initially but transition to grant WiFi, the PLT (polluted) bit is set to assist coexistence mechanism to debug if grant signal is expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-2-pkshih@realtek.com
2024-03-05wifi: cw1200: restore endian swappingJohannes Berg
The code here looks well thought-out, so it seems likely that the byte-swaps are actually needed, due to SPI bus and device behaviour. Restore the byte-swapping, in a way that doesn't result in sparse warnings. Fixes: 7ceade653429 ("wifi: cw1200: fix __le16 sparse warnings") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228121156.62f820aa6dfb.Ia63314e4d0ed1ee76f100846d68f0722abf6b793@changeid
2024-03-05wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warnsJavier Martinez Canillas
When these failures happen, the warning and call trace is printed which is excessive. Instead, just print the error but rate limited to prevent warns to unnecessarily pollute the kernel log buffer and make the serial console practically unusable. For example, on an AM625 BeaglePlay board where accessing a SDIO WiFi chip fails with an -110 (ETIMEDOUT) error: $ dmesg | grep "sdio write\|read failed (-110)" | wc -l 39 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228101042.728881-1-javierm@redhat.com
2024-03-05wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byteBitterblue Smith
PCI drivers and USB drivers can both use the same function, read_efuse_byte(), and they can call it directly. rtl8192de was the only user. Tested only with the upcoming rtl8192du driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e2c968d-f25c-4a40-be97-4fdcbdde69cf@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix false alarm countBitterblue Smith
total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just ofdm_fa_cnt. Fixes: 960361238b86 ("rtw88: 8821c: add false alarm statistics") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix beacon loss and disconnectBitterblue Smith
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because of frequent disconnections: Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 This is caused by a mistake in the chip initialisation. This version of the chip requires loading an extra AGC table right after the main one, but the extra table is being loaded at the wrong time, in rtw_chip_board_info_setup(). Move the extra AGC table loading to the right place, in rtw_phy_load_tables(). The rtw_chip_board_info_setup() can only do "software" things, and rtw_phy_load_tables() can really do IO. Fixes: 5d6651fe8583 ("rtw88: 8821c: support RFE type2 wifi NIC") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix connection failureBitterblue Smith
Clear bit 8 of REG_SYS_STATUS1 after MAC power on. Without this, some RTL8821CU and RTL8811CU cannot connect to any network: Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 1/3) Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 2/3) Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 3/3) Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with 90:55:de:__:__:__ timed out The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do it for all three types of chips. Tested with RTL8811CU (Tenda U9 V2.0). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/aeeefad9-27c8-4506-a510-ef9a9a8731a4@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix firmware upload failBitterblue Smith
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after reading and writing certain addresses. Without this, the firmware upload fails approximately more than 50% of the time. Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU but without Bluetooth. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
2024-03-05wifi: rtw88: Add missing VID/PIDs for 8811CU and 8821CUNick Morrow
Add VID/PIDs that are known to be missing for this driver. Removed /* 8811CU */ and /* 8821CU */ as they are redundant since the file is specific to those chips. Removed /* TOTOLINK A650UA v3 */ as the manufacturer. It has a REALTEK VID so it may not be specific to this adapter. Verified and tested. Cc: stable@vger.kernel.org Signed-off-by: Nick Morrow <morrownr@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4ume7mjw63u7.XlMUvUuacW2ErhOCdqlLkw2@1EHFQ.trk.elasticemail.com
2024-03-04wifi: mac80211: pass link conf to abort_channel_switchJohannes Berg
Pass the link conf to the abort_channel_switch driver method so the driver can handle things correctly. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: add link id to ieee80211_gtk_rekey_add()Shaul Triebitz
In MLO, we need the link id in the GTK key to be given by the driver after rekeying in wowlan, so add that. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvmTakashi Iwai
A few models require *.pnvm files while we don't declare them via MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the system that relies on the information from modinfo (e.g. openSUSE installer image). This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm files. type=feature ticket=none Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553 Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de [move to appropriate files] Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-28wifi: ath12k: fix license in p2p.c and p2p.hKalle Valo
ath12k uses BSD-3-Clause-Clear, not ISC. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226180745.3195805-1-kvalo@kernel.org
2024-02-28wifi: ath11k: constify MHI channel and controller configsJeff Johnson
Unlike the event configuration which can be modified by MHI, the channel and controller configurations are expected to be const. And since they are not modified locally, constify them to prevent runtime modification. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240223-mhi-const-wifi-ath11k-v1-1-51b9d42d2639@quicinc.com
2024-02-28wifi: ath12k: add rcu lock for ath12k_wmi_p2p_noa_event()Kang Yang
Warning will appear when running P2P GO: WARNING: suspicious RCU usage drivers/net/wireless/ath/ath12k/mac.c:583 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.8.0-rc4-wt-ath+ #4 Call Trace: <IRQ> dump_stack_lvl+0x82/0xa0 dump_stack+0x14/0x20 lockdep_rcu_suspicious+0x214/0x3b0 ath12k_mac_get_ar_by_vdev_id+0x192/0x220 [ath12k] ath12k_wmi_op_rx+0x2d7/0x1b40 [ath12k] ath12k_mac_get_ar_by_vdev_id() requires its callers to have called rcu_read_lock(), but in ath12k_wmi_p2p_noa_event() it is called without doing so, and hence the warning was triggered. Add rcu_read_lock() and rcu_read_unlock() to avoid warning. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 9411eecb60cb ("wifi: ath12k: implement handling of P2P NoA event") Reported-by: Kalle Valo <quic_kvalo@quicinc.com> Closes: https://lore.kernel.org/linux-wireless/87o7cusyvw.fsf@kernel.org/ Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240223054505.438839-1-quic_kangyang@quicinc.com
2024-02-28wifi: ath11k: decrease MHI channel buffer length to 8KBBaochen Qiang
Currently buf_len field of ath11k_mhi_config_qca6390 is assigned with 0, making MHI use a default size, 64KB, to allocate channel buffers. This is likely to fail in some scenarios where system memory is highly fragmented and memory compaction or reclaim is not allowed. There is a fail report which is caused by it: kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x47/0x60 warn_alloc+0x13a/0x1b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __alloc_pages_direct_compact+0xab/0x210 __alloc_pages_slowpath.constprop.0+0xd3e/0xda0 __alloc_pages+0x32d/0x350 ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __kmalloc_large_node+0x72/0x110 __kmalloc+0x37c/0x480 ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] device_for_each_child+0x5c/0xa0 ? __pfx_pci_pm_resume+0x10/0x10 ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e] ? srso_alias_return_thunk+0x5/0xfbef5 ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec] ? srso_alias_return_thunk+0x5/0xfbef5 dpm_run_callback+0x8c/0x1e0 device_resume+0x104/0x340 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x32/0x120 process_one_work+0x168/0x330 worker_thread+0x2f5/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe8/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Actually those buffers are used only by QMI target -> host communication. And for WCN6855 and QCA6390, the largest packet size for that is less than 6KB. So change buf_len field to 8KB, which results in order 1 allocation if page size is 4KB. In this way, we can at least save some memory, and as well as decrease the possibility of allocation failure in those scenarios. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Reported-by: Vlastimil Babka <vbabka@suse.cz> Closes: https://lore.kernel.org/ath11k/96481a45-3547-4d23-ad34-3a8f1d90c1cd@suse.cz/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240223053111.29170-1-quic_bqiang@quicinc.com
2024-02-28wifi: rtl8xxxu: fix mixed declarations in rtl8xxxu_set_aifs()Shiji Yang
Moving struct ieee80211_sta *sta variable definition to the front of the code to fix the ISO C90 forbids mixed declarations and code warning. Fixes: 43532c050f8e ("wifi: rtl8xxxu: support multiple interfaces in set_aifs()") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/TYAP286MB03157A408E0D69F2F6FBD88ABC552@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2024-02-28wifi: zd1211rw: silence sparse warningsJohannes Berg
This code wants to compare the obtained value, but as it also has a special type for register addresses to find places doing such compares and calculations wrong, we need explicit casts here to silence sparse. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240223114023.976fcd59e97a.I0bba4ef7dc2847ce8ab5ec229149e1a09413b8b9@changeid
2024-02-28wifi: rt2x00: silence sparse warningsJohannes Berg
Clearly writing __le32 was intended here, so just put the right casts into the code to silence sparse about it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240223114023.ce0c714124e9.I2b5710b761f63522574fbe7654d37151c31e0b77@changeid
generated by cgit (git 2.34.1) at 2025-04-30 15:32:48 +0000