summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-11-15net/mlx5e: Update doorbell for port timestamping CQ before the software counterRahul Rameshbabu
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the incremented consumer index after the relevant software counters in the kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to either overrunning the device CQ or exceeding the expected software buffer size in the device CQ if the device CQ size was greater than the software buffer size. Update the relevant software counter only after updating the device CQ consumer index in the port timestamping napi_poll context. Log: mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1 mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04 Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: Track xmit submission to PTP WQ after populating metadata mapRahul Rameshbabu
Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse ---[ end trace 0000000000000000 ]--- Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: Avoid referencing skb after free-ing in drop path of ↵Rahul Rameshbabu
mlx5e_sq_xmit_wqe When SQ is a port timestamping SQ for PTP, do not access tx flags of skb after free-ing the skb. Free the skb only after all references that depend on it have been handled in the dropped WQE path. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offloadJianbo Liu
As IPSec packet offload in switchdev mode is not supported with LAG, it's unnecessary to modify those sent-to-vport rules to the peer eswitch. Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: Fix pedit endiannessVlad Buslov
Referenced commit addressed endianness issue in mlx5 pedit implementation in ad hoc manner instead of systematically treating integer values according to their types which left pedit fields of sizes not equal to 4 and where the bytes being modified are not least significant ones broken on big endian machines since wrong bits will be consumed during parsing which leads to following example error when applying pedit to source and destination MAC addresses: [Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0) [Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............ Treat masks and values of pedit and filter match as network byte order, refactor pointers to them to void pointers instead of confusing u32 pointers and only cast to pointer-to-integer when reading a value from them. Treat pedit mlx5_fields->field_mask as host byte order according to its type u32, change the constants in fields array accordingly. Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: fix double free of encap_header in update funcsGavin Li
Follow up to the previous patch to fix the same issue for mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc() fails. When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Gavin Li <gavinl@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5e: fix double free of encap_headerDust Li
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail. This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries") Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com> Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5: Decouple PHC .adjtime and .adjphase implementationsRahul Rameshbabu
When running a phase adjustment operation, the free running clock should not be modified at all. The phase control keyword is intended to trigger an internal servo on the device that will converge to the provided delta. A free running counter cannot implement phase adjustment. Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5: DR, Allow old devices to use multi destination FTEErez Shitrit
The current check isn't aware of old devices that don't have the relevant FW capability. This patch allows multi destination FTE in old cards, as it was before this check. Fixes: f6f46e7173cb ("net/mlx5: DR, Add check for multi destination FTE") Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15net/mlx5: Free used cpus mask when an IRQ is releasedMaher Sanalla
Each EQ table maintains a cpumask of the already used CPUs that are mapped to IRQs to ensure that each IRQ gets mapped to a unique CPU. However, on IRQ release, the said cpumask is not updated by clearing the CPU from the mask to allow future IRQ request, causing the following error when a SF is reloaded after it has utilized all CPUs for its IRQs: mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ. err = -28 Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs mask, to prevent the case described above. While at it, move the used cpumask update to the EQ layer as it is more fitting and preserves symmetricity of the IRQ request/release API. Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15Revert "net/mlx5: DR, Supporting inline WQE when possible"Itamar Gozlan
This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f. The revert is required due to the suspicion it cause some tests fail and will be moved to further investigation. Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15nouveau: don't fail driver load if no display hw present.Dave Airlie
If we get back ENODEV don't fail load. There are nvidia devices that don't have display blocks and the driver should work on those. Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com
2023-11-15drm: panel-orientation-quirks: Add quirk for Lenovo Legion GoBrenton Simpson
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing the right controller (90° CW from the rest of the device). Signed-off-by: Brenton Simpson <appsforartists@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
2023-11-15accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org (cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2) Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2023-11-15xen/events: remove some info_for_irq() calls in pirq handlingJuergen Gross
Instead of the IRQ number user the struct irq_info pointer as parameter in the internal pirq related functions. This allows to drop some calls of info_for_irq(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-15xen/events: modify internal [un]bind interfacesJuergen Gross
Modify the internal bind- and unbind-interfaces to take a struct irq_info parameter. When allocating a new IRQ pass the pointer from the allocating function further up. This will reduce the number of info_for_irq() calls and make the code more efficient. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-15xen/events: drop xen_allocate_irqs_dynamic()Juergen Gross
Instead of having a common function for allocating a single IRQ or a consecutive number of IRQs, split up the functionality into the callers of xen_allocate_irqs_dynamic(). This allows to handle any allocation error in xen_irq_init() gracefully instead of panicing the system. Let xen_irq_init() return the irq_info pointer or NULL in case of an allocation error. Additionally set the IRQ into irq_info already at allocation time, as otherwise the IRQ would be '0' (which is a valid IRQ number) until being set. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-14gve: Fixes for napi_poll when budget is 0Ziwei Xiao
Netpoll will explicilty pass the polling call with a budget of 0 to indicate it's clearing the Tx path only. For the gve_rx_poll and gve_xdp_poll, they were mistakenly taking the 0 budget as the indication to do all the work. Add check to avoid the rx path and xdp path being called when budget is 0. And also avoid napi_complete_done being called when budget is 0 for netpoll. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-13 (ice) This series contains updates to ice driver only. Arkadiusz ensures the device is initialized with valid lock status value. He also removes range checking of dpll priority to allow firmware to process the request; supported values are firmware dependent. Finally, he removes setting of can change capability for pins that cannot be changed. Dan restores ability to load a package which doesn't contain a signature segment. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix DDP package download for packages without signature segment ice: dpll: fix output pin capabilities ice: dpll: fix check for dpll input priority range ice: dpll: fix initial lock status of dpll ==================== Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14pds_core: fix up some format-truncation complaintsShannon Nelson
Our friendly kernel test robot pointed out a couple of potential string truncation issues. None of which were we worried about, but can be relatively easily fixed to quiet the complaints. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/ Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14pds_core: use correct index to mask irqShannon Nelson
Use the qcq's interrupt index, not the irq number, to mask the interrupt. Since the irq number can be out of range from the number of possible interrupts, we can end up accessing and potentially scribbling on out-of-range and/or unmapped memory, making the kernel angry. [ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84 [ 3116.047059] #PF: supervisor write access in kernel mode [ 3116.052895] #PF: error_code(0x0002) - not-present page [ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0 [ 3116.066221] Oops: 0002 [#1] SMP NOPTI [ 3116.092948] RIP: 0010:iowrite32+0x9/0x76 [ 3116.190452] Call Trace: [ 3116.193185] <IRQ> [ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.210618] ? __die_body.cold+0x8/0xa [ 3116.214806] ? page_fault_oops+0x16d/0x1ac [ 3116.219382] ? exc_page_fault+0xbe/0x13b [ 3116.223764] ? asm_exc_page_fault+0x22/0x27 [ 3116.228440] ? iowrite32+0x9/0x76 [ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.237627] __handle_irq_event_percpu+0x3a/0x184 [ 3116.243088] handle_irq_event+0x57/0xb0 [ 3116.247575] handle_edge_irq+0x87/0x225 [ 3116.252062] __common_interrupt+0x3e/0xbc [ 3116.256740] common_interrupt+0x7b/0x98 [ 3116.261216] </IRQ> [ 3116.263745] <TASK> [ 3116.266268] asm_common_interrupt+0x22/0x27 Reported-by: Joao Martins <joao.m.martins@oracle.com> Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14tg3: Increment tx_dropped in tg3_tso_bug()Alex Pakhunov
tg3_tso_bug() drops a packet if it cannot be segmented for any reason. The number of discarded frames should be incremented accordingly. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14tg3: Move the [rt]x_dropped counters to tg3_napiAlex Pakhunov
This change moves [rt]x_dropped counters to tg3_napi so that they can be updated by a single writer, race-free. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14net: stmmac: avoid rx queue overrunBaruch Siach
dma_rx_size can be set as low as 64. Rx budget might be higher than that. Make sure to not overrun allocated rx buffers when budget is larger. Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs 'cur_rx'. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14net: stmmac: fix rx budget limit checkBaruch Siach
The while loop condition verifies 'count < limit'. Neither value change before the 'count >= limit' check. As is this check is dead code. But code inspection reveals a code path that modifies 'count' and then goto 'drain_data' and back to 'read_again'. So there is a need to verify count value sanity after 'read_again'. Move 'read_again' up to fix the count limit check. Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14nouveau: use an rwlock for the event lock.Dave Airlie
This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com
2023-11-14nouveau/gsp/r535: Fix a NULL vs error pointer bugDan Carpenter
The r535_gsp_cmdq_get() function returns error pointers but this code checks for NULL. Also we need to propagate the error pointer back to the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL pointer dereference. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain
2023-11-14nouveau/gsp/r535: uninitialized variable in r535_gsp_acpi_mux_id()Dan Carpenter
The if we hit the "continue" statement on the first iteration through the loop then "handle_mux" needs to be set to NULL so we continue looping. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain
2023-11-14Merge branch '6.7/scsi-staging' into 6.7/scsi-fixesMartin K. Petersen
Pull in queued fixes for 6.7 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-14xen/events: remove some simple helpers from events_base.cJuergen Gross
The helper functions type_from_irq() and cpu_from_irq() are just one line functions used only internally. Open code them where needed. At the same time modify and rename get_evtchn_to_irq() to return a struct irq_info instead of the IRQ number. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-14xen/events: reduce externally visible helper functionsJuergen Gross
get_evtchn_to_irq() has only one external user while irq_from_evtchn() provides the same functionality and is exported for a wider user base. Modify the only external user of get_evtchn_to_irq() to use irq_from_evtchn() instead and make get_evtchn_to_irq() static. evtchn_from_irq() and irq_from_virq() have a single external user and can easily be combined to a new helper irq_evtchn_from_virq() allowing to drop irq_from_virq() and to make evtchn_from_irq() static. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-13r8169: fix network lost after resume on DASH systemsChunHao Lin
Device that support DASH may be reseted or powered off during suspend. So driver needs to handle DASH during system suspend and resume. Or DASH firmware will influence device behavior and causes network lost. Fixes: b646d90053f8 ("r8169: magic.") Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: ChunHao Lin <hau@realtek.com> Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13r8169: add handling DASH when DASH is disabledChunHao Lin
For devices that support DASH, even DASH is disabled, there may still exist a default firmware that will influence device behavior. So driver needs to handle DASH for devices that support DASH, no matter the DASH status is. This patch also prepares for "fix network lost after resume on DASH systems". Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled") Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13net: ethernet: cortina: Fix MTU max settingLinus Walleij
The RX max frame size is over 10000 for the Gemini ethernet, but the TX max frame size is actually just 2047 (0x7ff after checking the datasheet). Reflect this in what we offer to Linux, cap the MTU at the TX max frame minus ethernet headers. We delete the code disabling the hardware checksum for large MTUs as netdev->mtu can no longer be larger than netdev->max_mtu meaning the if()-clause in gmac_fix_features() is never true. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13net: ethernet: cortina: Handle large framesLinus Walleij
The Gemini ethernet controller provides hardware checksumming for frames up to 1514 bytes including ethernet headers but not FCS. If we start sending bigger frames (after first bumping up the MTU on both interfaces sending and receiving the frames), truncated packets start to appear on the target such as in this tcpdump resulting from ping -s 1474: 23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown), ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing! (tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502) OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482 If we bypass the hardware checksumming and provide a software fallback, everything starts working fine up to the max TX MTU of 2047 bytes, for example ping -s2000 192.168.1.2: 00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown), ethertype IPv4 (0x0800), length 2042: (tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028) Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008 The bit enabling to bypass hardware checksum (or any of the "TSS" bits) are undocumented in the hardware reference manual. The entire hardware checksum unit appears undocumented. The conclusion that we need to use the "bypass" bit was found by trial-and-error. Since no hardware checksum will happen, we slot in a software checksum fallback. Check for the condition where we need to compute checksum on the skb with either hardware or software using == CHECKSUM_PARTIAL instead of != CHECKSUM_NONE which is an incomplete check according to <linux/skbuff.h>. On the D-Link DIR-685 router this fixes a bug on the conduit interface to the RTL8366RB DSA switch: as the switch needs to add space for its tag it increases the MTU on the conduit interface to 1504 and that means that when the router sends packages of 1500 bytes these get an extra 4 bytes of DSA tag and the transfer fails because of the erroneous hardware checksumming, affecting such basic functionality as the LuCI web interface. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13net: ethernet: cortina: Fix max RX frame defineLinus Walleij
Enumerator 3 is 1548 bytes according to the datasheet. Not 1542. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13bonding: stop the device in bond_setup_by_slave()Eric Dumazet
Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13ptp: annotate data-race around q->head and q->tailEric Dumazet
As I was working on a syzbot report, I found that KCSAN would probably complain that reading q->head or q->tail without barriers could lead to invalid results. Add corresponding READ_ONCE() and WRITE_ONCE() to avoid load-store tearing. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13Revert "ptp: Fixes a null pointer dereference in ptp_ioctl"Jakub Kicinski
This reverts commit 8a4f030dbced6fc255cbe67b2d0a129947e18493. Richard says: The test itself is harmless, but keeping it will make people think, "oh this pointer can be invalid." In fact the core stack ensures that ioctl() can't be invoked after release(), otherwise Bad Stuff happens. Fixes: 8a4f030dbced ("ptp: Fixes a null pointer dereference in ptp_ioctl") Link: https://lore.kernel.org/all/ZVAf_qdRfDAQYUt-@hoboy.vegasvil.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13ice: fix DDP package download for packages without signature segmentDan Nowlin
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix output pin capabilitiesArkadiusz Kubalewski
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix check for dpll input priority rangeArkadiusz Kubalewski
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix initial lock status of dpllArkadiusz Kubalewski
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13i2c: ocores: Move system PM hooks to the NOIRQ phaseSamuel Holland
When an I2C device contains a wake IRQ subordinate to a regmap-irq chip, the regmap-irq code must be able to perform I2C transactions during suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must be suspended/resumed during the NOIRQ phase. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-11-13drm/ci: make github dependabot happy againLinus Torvalds
The drm CI scripts for gitlab have a requirements file that makes the github 'dependabot' worry about a few of the required tooling versions. It wants to update the pip requirements from 23.2.1 to 23.3: "When installing a package from a Mercurial VCS URL, e.g. pip install hg+..., with pip prior to v23.3, the specified Mercurial revision could be used to inject arbitrary configuration options to the hg clone call (e.g. --config). Controlling the Mercurial configuration can modify how and which repository is installed. This vulnerability does not affect users who aren't installing from Mercurial" and upgrade the urllib3 requirements from 2.0.4 to 2.0.7 due to two issues: "urllib3's request body not stripped after redirect from 303 status changes request method to GET" "`Cookie` HTTP header isn't stripped on cross-origin redirects" The file also ends up not having a newline at the end, that my editor ends up wanting to fix automatically. Link: https://github.com/dependabot Tested-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-13xen/events: remove unused functionsJuergen Gross
There are no users of xen_irq_from_pirq() and xen_set_irq_pending(). Remove those functions. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-13xen/events: fix delayed eoi list handlingJuergen Gross
When delaying eoi handling of events, the related elements are queued into the percpu lateeoi list. In case the list isn't empty, the elements should be sorted by the time when eoi handling is to happen. Unfortunately a new element will never be queued at the start of the list, even if it has a handling time lower than all other list elements. Fix that by handling that case the same way as for an empty list. Fixes: e99502f76271 ("xen/events: defer eoi in case of excessive number of events") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-13ppp: limit MRU to 64KWillem de Bruijn
ppp_sync_ioctl allows setting device MRU, but does not sanity check this input. Limit to a sane upper bound of 64KB. No implementation I could find generates larger than 64KB frames. RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the 16-bit length field. Other protocols will be smaller, such as PPPoE (9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364). PPTP and L2TP encapsulate in IP. Syzbot managed to trigger alloc warning in __alloc_pages: if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp)) WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544 __alloc_skb+0x12b/0x330 net/core/skbuff.c:651 __netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334 tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494 process_one_work+0x884/0x15c0 kernel/workqueue.c:2630 With call ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8) Similar code exists in other drivers that implement ppp_channel_ops ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from this are pppol2tp_ioctl and pppoe_ioctl. This code goes back to the start of git history. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: mvneta: fix calls to page_pool_get_statsSven Auhagen
Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208 ethtool_get_stats from dev_ethtool+0xf48/0x2480 dev_ethtool from dev_ioctl+0x538/0x63c dev_ioctl from sock_ioctl+0x49c/0x53c sock_ioctl from sys_ioctl+0x134/0xbd8 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1439fa8 to 0xf1439ff0) 9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070) This commit adds the proper checks before calling page_pool_get_stats. Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13i2c: designware: Fix corrupted memory seen in the ISRJan Bottorff
When running on a many core ARM64 server, errors were happening in the ISR that looked like corrupted memory. These corruptions would fix themselves if small delays were inserted in the ISR. Errors reported by the driver included "i2c_designware APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and "i2c_designware APMC0D0F:00:controller timed out" during in-band IPMI SSIF stress tests. The problem was determined to be memory writes in the driver were not becoming visible to all cores when execution rapidly shifted between cores, like when a register write immediately triggers an ISR. Processors with weak memory ordering, like ARM64, make no guarantees about the order normal memory writes become globally visible, unless barrier instructions are used to control ordering. To solve this, regmap accessor functions configured by this driver were changed to use non-relaxed forms of the low-level register access functions, which include a barrier on platforms that require it. This assures memory writes before a controller register access are visible to all cores. The community concluded defaulting to correct operation outweighed defaulting to the small performance gains from using relaxed access functions. Being a low speed device added weight to this choice of default register access behavior. Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit (git 2.34.1) at 2025-05-08 01:37:53 +0000