Age | Commit message (Collapse) | Author |
|
There's no keep-alive packet being received by mac80211 stack when WED
is enabled, which leads to tx BA session timeout. This patch calls
ieee80211_refresh_tx_agg_session_timer() to refresh timer according
to tx status reporting.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
According to the documentation, ieee80211_rx_list must not run concurrently
with ieee80211_tx_status (or its variants).
Cc: stable@vger.kernel.org
Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb")
Reported-by: Brian Coverstone <brian@mainsequence.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
vzalloc may fails, dump might be null and will cause
illegal address access later.
Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk
Fixes: d2bf7959d9c0 ("mt76: mt7663: introduce coredump support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The scatter and gather frame may be incorrect because WED and WO may
send frames to host driver interleaved.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If kernel do not enable CONFIG_HWMON, it may cause thermal
initialization to be done with temperature value 0 and then can not
transmit. This commit fixes it by setting trigger/restore temperature
before checking CONFIG_HWMON.
Fixes: 7d12b38ab6f6 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled.
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On MT7986 the WiFi driver currently does not get automatically loaded,
requiring manual modprobing because the device tree compatibles are not
exported into metadata.
Add the missing MODULE_DEVICE_TABLE macro to fix this.
Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allow AP to change channel width for 40Mhz intolerant STA on the
2.4 GHz band.
Signed-off-by: Himanshu Goyal <himanshu.goyal@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The 11be generation's radiotap bitfields were wrongly copy-and-pasted
from 11ax driver, so fix them accordingly.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Drop the lock before returning -EINVAL.
Fixes: ecaccdae7a7e ("wifi: mt76: mt7915: rework mt7915_thermal_temp_store()")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
./drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3136:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4059
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7921 just stop some workers and clean up chip status before reboot.
In stress test, there are working activities still running at the period
of .shutdown callback and that would cause some hosts cannot recover
DMA after reboot. To avoid the floating state in reboot, we use
mt7921_pci_remove() to fully deinit all resources.
Fixes: f23a0cea8bd6 ("wifi: mt76: mt7921e: add pci .shutdown() support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Should not use AND operator to check vif type NL80211_IFTYPE_MONITOR, and
that will cause we go into sniffer command for both STA and MONITOR
mode. However, the sniffer command would set channel properly (with some
extra options), the STA mode still works even if using the wrong
command.
Fix vif type check to make sure we using the right command to update
channel.
Fixes: 914189af23b8 ("wifi: mt76: mt7921: fix channel switch fail in monitor mode")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
clear redundent definitions only
Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add iface_combination declaration to enable concurrent mode. Only two
interfaces under same frequency is supported currently. We limit the
role combination to be STA + P2P or STA + AP only for now until new
feature is requested.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415035016.15788-2-pkshih@realtek.com
|
|
Power saving for more than one station is not supported currently.
Disallow entering PS mode when we have more than one associated
stations.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415035016.15788-1-pkshih@realtek.com
|
|
Since firmware can't have proper statistics, driver update the
statistics periodically to firmware to assist in tuning performance.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415034900.15679-5-pkshih@realtek.com
|
|
Remove macros that set H2C data. Instead, use struct and
le32_encode_bits() with mask definition to make it clean.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415034900.15679-4-pkshih@realtek.com
|
|
Since we can get the current channel definition each interface maps to,
remove store_op function that is no longer required to make things simple.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415034900.15679-3-pkshih@realtek.com
|
|
Mac80211 core may ask driver to change to idle mode during HW scan,
then H2C command for HW scan will send failed since chip is in idle
mode. Therefore, We check the SCANNING flag before entering IPS to
prevent this behavior.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230415034900.15679-2-pkshih@realtek.com
|
|
8851B has various hardware module types, so BT coexistence in firmware
needs these information to make decision. Add them to make 8851B work
well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230412012831.10519-5-pkshih@realtek.com
|
|
Correct Bluetooth RSSI count method. The 6dB is the gap between hardware
packet sampled value and real RSSI value.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230412012831.10519-4-pkshih@realtek.com
|
|
Chips use similar hardware for path control, but could different
path/antenna configuration. Add these register to monitor, if there are
wrong settings, these register can help to debug.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230412012831.10519-3-pkshih@realtek.com
|
|
When Wi-Fi & Bluetooth are both busy at the same time, Wi-Fi need to
enable RX gain to protect Wi-Fi RX RF ability. Without this configure
the interference from Bluetooth will bring a big impact to Wi-Fi RX.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230412012831.10519-2-pkshih@realtek.com
|
|
In WoWLAN Mode, it's expected that WiFi chip could enter power save mode
only after all setting is finished, but current wow_enter_lps function
break the rule and may lead to WoWLAN function fail in low probability,
so fix it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230410053438.10682-2-pkshih@realtek.com
|
|
To support WoWLAN mode for 8852be, we add one PLE quota setting and
WoWLAN stub, which shows that supported WLAN events include receiving
magic packet, rekey packet and deauth packet, and disconnecting from AP.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230410053438.10682-1-pkshih@realtek.com
|
|
This is noising the kernel log and customers asked to hush it down.
We can live with this message in "info" verbosity.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.0a7f557aa2a0.If9db474b63242b1bfaed659aa174b678ae8dc196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
From the second iteration and on, we just tested the bit once and
continued to the next iteration.
Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Newer firmware images have a TLV advertising how many
beacons they support, use that to permit adding more
links in AP mode (FW needs to support at least as many
links as beacons).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Implement switching keys from one set of firmware station IDs
to another set, during link switch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.c6a777dd5e47.I693f7fd7c52fe8b51a58af69d45488511367f49e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we switch station links, also add the code to switch
BAIDs from one station mask to the new one.
To do so, refactor the switching code a bit to have common
code for all the needed switches; will add keys next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.40654afce24f.I0e35151f69e7513be53ddb8f008e9ab48278c352@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we have MLO connections, a BAID applies to multiple
firmware stations. Track the station mask instead of the
station ID, getting rid of a few more deflink cases and
preparing for handling link switching for BAIDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start supporting API version 77 for AX devices.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.e522ccefe354.If7628363fafeb7687163103e734206915c445197@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we remove a queue we need to use the currently active
firmware stations in the mask, not the deflink one. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.01cdd2153418.I176d54f2d869f51b3707d056adb96455cf885f93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The initiator smooth list is initialized only in iwl_mvm_up(), but is
cleared in iwl_mvm_mac_stop. This may result in iterating over the
list before it was initialized in case iwl_mvm_up() failed early.
Fix it by moving the list initialization to an earlier stage.
Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.b50b1fe9a576.Ie348ffae110612d2e252ac120a3ba0aea063b1b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We are going to need this in more places than just the
key code, so factor out the functionality of getting
the FW station ID mask (filtered to a specific link if
needed) to a separate function that can now be called
both under RCU and mvm->mutex protection.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.eff92b93025d.I2c50290a0537d5db3d3460f4d57c78a4712ffb75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware split the HE support field into HE and "pseudo HE",
the latter is really for AP and doesn't implement trigger frame
handling for example.
Use the new field for AP mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The usage of the 'dtim_period' value was wrong, as it is only
a multiplier of the beacon interval, and thus, beacon interval should
also be considered. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.e08293d6cace.I25f8cea3189472bd714676ca38b121d7c60fb9d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In iwl_mvm_mac_ctxt_get_lowest_rate() we were still accessing
vif->bss_conf without any multi-link provisions, and also the
info->band, both of which isn't valid in MLO.
Fix the code to look at the correct link. In case of EAPOL
transmissions for the initial 4-way-HS, look up the correct
link here as well, and warn if multiple are active.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.d892f68d3bcd.I7d6927abeea5c3899db225391dbc6a5c77805e80@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When rx/tx queues are being freed, on a different CPU there could be
still rx flow running. Call napi_synchronize() to prevent such a race.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For some devices, in client mode, we support full bandwidth
uplink multi-user MIMO. Add the necessary capability.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.88b6aac6c876.Ibf2a7a38d7a172c371c347c9d4441e8c656cefe3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
bcma/main.c uses of_dma_configure() which is declared in of_device.h.
of_device.h gets implicitly included by of_platform.h, but that is going
to be removed soon.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org
|
|
Handle them the same way as the devices with 3-4 USB out endpoints.
This is needed for the RTL8192FU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ef4bc66d-84f5-4021-efd7-1787d097519c@gmail.com
|
|
Add some new members to rtl8xxxu_fileops and use them instead of
checking priv->rtl_chip.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com
|
|
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439).
The odd thing about this is that the previous 1YN populated
on M.2 card for evaluation purposes had BRCM SDIO vendor ID,
while the chip populated on real hardware has a Cypress one.
The device ID also differs between the two devices. But they
are both 43439 otherwise, so add the IDs for both.
On-device 1YN (43439), the new one, chip label reads "1YN":
```
/sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device
0x04b4
0xbd3d
```
EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4":
```
/sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device
0x02d0
0xa9a6
```
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de
|
|
In AP mode, 'sta' could be NULL if sending broadcast/multicast packets,
so we should check before accessing, or it causes crash:
BUG: kernel NULL pointer dereference, address: 0000000000000004
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 92 Comm: kworker/u33:0 Tainted: G OE
Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core]
RIP: 0010:rtw89_core_tx_update_desc_info+0x2cc/0x7d0 [rtw89_core]
Code: e2 01 41 be 04 00 00 00 41 8b 84 c4 0c 01 00 00 75 0d 45 31 f6 ...
RSP: 0018:ffffb4cf807afce0 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffffb4cf807afd48 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: ffffb4cf807afd30 R08: ffff9b28c1e59808 R09: ffff9b28c0297100
R10: 00000000052cf7c4 R11: 00000000052cf7c4 R12: ffff9b28c1602040
R13: ffff9b28c07b3000 R14: 0000000000000004 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9b2a73280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000004 CR3: 00000001ca410003 CR4: 00000000000606e0
Call Trace:
<TASK>
rtw89_core_tx_write+0x7c/0x100 [rtw89_core]
rtw89_core_txq_work+0x1b4/0x530 [rtw89_core]
process_one_work+0x222/0x3f0
worker_thread+0x50/0x3f0
kthread+0x16b/0x190
? rescuer_thread+0x3a0/0x3a0
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Fixes: e5307c9cd7ee ("wifi: rtw89: set data lowest rate according to AP supported rate")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230406093009.5869-1-pkshih@realtek.com
|
|
Use primary channel index to determine which 5 MHz mask should be enable.
This mask is used to prevent noise from channel edge to effect CCA
threshold in wide bandwidth (>= 40 MHZ).
Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part")
Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com
|
|
These tables are used by RF calibrations to assist to configure PHY and
RF registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230401142548.55466-4-pkshih@realtek.com
|
|
These tables contain BB and RF parameters that driver will load them into
registers. It also contains TX power according to country, band, rate and
so on. Increasing thermal can cause TX power degraded, so power tracking
tables are defined to compensate TX power.
Internal version of these tables:
- HALBB_029_106_15 (V17)
- HALRF_029_00_089
* Radio A 0x22
* NCTL 0x5
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230401142548.55466-3-pkshih@realtek.com
|
|
These tables contain BB and RF parameters that driver will load them into
registers. It also contains TX power according to country, band, rate and
so on. Increasing thermal can cause TX power degraded, so power tracking
tables are defined to compensate TX power.
Internal version of these tables:
- HALBB_029_106_15 (V17)
- HALRF_029_00_089
* Radio A 0x22
* NCTL 0x5
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230401142548.55466-2-pkshih@realtek.com
|