summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-03drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transferKuogee Hsieh
There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516121/ Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-12-27drm/msm/hdmi: Fix the error handling path of msm_hdmi_dev_probe()Christophe JAILLET
If an error occurs after a successful msm_hdmi_get_phy() call, it must be undone by a corresponding msm_hdmi_put_phy(), as already done in the remove function. Fixes: 437365464043 ("drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514847/ Link: https://lore.kernel.org/r/b3f9da097851e2e42a40dc61458aa98c41c88d0d.1670741386.git.christophe.jaillet@wanadoo.fr Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-12-27drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_pathMiaoqian Lin
of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Fixes: b9364eed9232 ("drm/msm/dpu: Move min BW request and full BW disable back to mdss") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514264/ Link: https://lore.kernel.org/r/20221207065922.2086368-1-linmq006@gmail.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-12-27drm/msm/dpu: Fix some kernel-doc commentsYang Li
Make the description of @init to @p in dpu_encoder_phys_wb_init() and remove @wb_roi in dpu_encoder_phys_wb_setup_fb() to clear the below warnings: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:139: warning: Excess function parameter 'wb_roi' description in 'dpu_encoder_phys_wb_setup_fb' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Function parameter or member 'p' not described in 'dpu_encoder_phys_wb_init' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Excess function parameter 'init' description in 'dpu_encoder_phys_wb_init' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3067 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/511605/ Link: https://lore.kernel.org/r/20221115014902.45240-1-yang.lee@linux.alibaba.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-11-26Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag Core: - MSM_INFO_GET_FLAGS support - Cleaned up MSM IOMMU wrapper code DPU: - Added support for XR30 and P010 image formats - Reworked MDSS/DPU schema, added SM8250 MDSS bindings - Added Qualcomm SM6115 support DP: - Dropped unsane sanity checks DSI: - Fix calculation of DSC pps payload DSI PHY: - DSI PHY support for QCM2290 HDMI: - Reworked dev init path And, as usual, small misc fixes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-26drm/msm/disp/dpu1: add support for display on SM6115Adam Skladowski
Add required display hw catalog changes for SM6115. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/512875/ Link: https://lore.kernel.org/r/20221124001708.25720-3-a39.skl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-26drm/msm/mdp5: fix reading hw revision on db410c platformDmitry Baryshkov
Since the commit commit c6122688f265 ("drm/msm/mdp5: stop overriding drvdata") reading the MDP5 hw revision on db410c will crash the board as the MDSS_GDSC is not enabled. Revert a part of the offending commit (moving rpm enablement) and set priv->kms earlier. This make it possible to use pm_runtime_get_sync() during read_mdp_hw_revision(), which will power up both the MDP5 and MDSS devices. Fixes: c6122688f265 ("drm/msm/mdp5: stop overriding drvdata") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512985/ Link: https://lore.kernel.org/r/20221125000213.252115-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-23drm/msm/hdmi: remove unnecessary NULL checkDan Carpenter
This code was recently refactored in commit and now the "hdmi" pointer can't be NULL. Checking for NULL leads to a Smatch warning: drivers/gpu/drm/msm/hdmi/hdmi.c:141 msm_hdmi_init() warn: variable dereferenced before check 'hdmi' (see line 119) Fixes: 69a88d8633ec ("drm/msm/hdmi: move resource allocation to probe function") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512163/ Link: https://lore.kernel.org/r/Y3eCqQ2pm1uQnktV@kadam Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Prevent signed BPG offsets from bleeding into adjacent bitsMarijn Suijten
The bpg_offset array contains negative BPG offsets which fill the full 8 bits of a char thanks to two's complement: this however results in those bits bleeding into the next field when the value is packed into DSC PPS by the drm_dsc_helper function, which only expects range_bpg_offset to contain 6-bit wide values. As a consequence random slices appear corrupted on-screen (tested on a Sony Tama Akatsuki device with sdm845). Use AND operators to limit these two's complement values to 6 bits, similar to the AMD and i915 drivers. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508941/ Link: https://lore.kernel.org/r/20221026182824.876933-11-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bitsMarijn Suijten
According to the comment this DPU register contains the bits per pixel as a 6.4 fractional value, conveniently matching the contents of bits_per_pixel in struct drm_dsc_config which also uses 4 fractional bits. However, the downstream source this implementation was copy-pasted from has its bpp field stored _without_ fractional part. This makes the entire convoluted math obsolete as it is impossible to pull those 4 fractional bits out of thin air, by somehow trying to reuse the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??). The rest of the code merely attempts to keep the integer part a multiple of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel << 12; already filling up those bits anyway (but not on downstream). Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/508946/ Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Disallow 8 BPC DSC configuration for alternative BPC valuesMarijn Suijten
According to the `/* bpc 8 */` comment below only values for a bits_per_component of 8 are currently hardcoded in place. This is further confirmed by downstream sources [1] containing different constants for other BPC values (and different initial_offset too, with an extra dependency on bits_per_pixel). Prevent future mishaps by explicitly disallowing any other bits_per_component value until the right parameters are put in place and tested. [1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139 Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508942/ Link: https://lore.kernel.org/r/20221026182824.876933-9-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Account for DSC's bits_per_pixel having 4 fractional bitsMarijn Suijten
drm_dsc_config's bits_per_pixel field holds a fractional value with 4 bits, which all panel drivers should adhere to for drm_dsc_pps_payload_pack() to generate a valid payload. All code in the DSI driver here seems to assume that this field doesn't contain any fractional bits, hence resulting in the wrong values being computed. Since none of the calculations leave any room for fractional bits or seem to indicate any possible area of support, disallow such values altogether. calculate_rc_params() in intel_vdsc.c performs an identical bitshift to get at this integer value. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508938/ Link: https://lore.kernel.org/r/20221026182824.876933-8-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Migrate to drm_dsc_compute_rc_parameters()Marijn Suijten
As per the FIXME this code is entirely duplicate with what is already provided inside drm_dsc_compute_rc_parameters(), supposedly because that function was yielding "incorrect" results while in reality the panel driver(s?) used for testing were providing incorrect parameters. For example, this code from downstream assumed dsc->bits_per_pixel to contain an integer value, whereas the upstream drm_dsc_config struct stores it with 4 fractional bits. drm_dsc_compute_rc_parameters() already accounts for this feat while the panel driver used for testing [1] wasn't, hence making drm_dsc_compute_rc_parameters() seem like it was returning an incorrect result. Other users of dsc->bits_per_pixel inside dsi_populate_dsc_params() also treat it in the same erroneous way, and will be addressed in a separate patch. In the end, using drm_dsc_compute_rc_parameters() spares both a lot of duplicate code and erratic behaviour. [1]: https://git.linaro.org/people/vinod.koul/kernel.git/commit/?h=topic/pixel3_5.18-rc1&id=1d7d98ad564f1ec69e7525e07418918d90f247a1 Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/508939/ Link: https://lore.kernel.org/r/20221026182824.876933-7-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Appropriately set dsc->mux_word_size based on bpcMarijn Suijten
This field is currently unread but will come into effect when duplicated code below is migrated to call drm_dsc_compute_rc_parameters(), which uses the bpc-dependent value of the local variable mux_words_size in much the same way. The hardcoded constant seems to be a remnant from the `/* bpc 8 */` comment right above, indicating that this group of field assignments is applicable to bpc = 8 exclusively and should probably bail out on different bpc values, until constants for other bpc values are added (or the current ones are confirmed to be correct across multiple bpc's). Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508943/ Link: https://lore.kernel.org/r/20221026182824.876933-6-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Reuse earlier computed dsc->slice_chunk_sizeMarijn Suijten
dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() and already computes a value for slice_chunk_size, whose value doesn't need to be recomputed and re-set here. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508934/ Link: https://lore.kernel.org/r/20221026182824.876933-5-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Use DIV_ROUND_UP instead of conditional increment on moduloMarijn Suijten
This exact same math is used to compute bytes_in_slice above in dsi_update_dsc_timing(), also used to fill slice_chunk_size. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508935/ Link: https://lore.kernel.org/r/20221026182824.876933-4-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Remove repeated calculation of slice_per_intfMarijn Suijten
slice_per_intf is already computed for intf_width, which holds the same value as hdisplay. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508933/ Link: https://lore.kernel.org/r/20221026182824.876933-3-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Remove useless math in DSC calculationsMarijn Suijten
Multiplying a value by 2 and adding 1 to it always results in a value that is uneven, and that 1 gets truncated immediately when performing integer division by 2 again. There is no "rounding" possible here. After that target_bpp_x16 is used to store a multiplication of bits_per_pixel by 16 which is only ever read to immediately be divided by 16 again, and is elided in much the same way. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508932/ Link: https://lore.kernel.org/r/20221026182824.876933-2-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Add phy configuration for QCM2290Loic Poulain
The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not fully compatible with the standard 14nm PHY, so it requires a separate compatible and config entry. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [DB: rebased and updated commit msg] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/504578/ Link: https://lore.kernel.org/r/20220924121900.222711-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: drop modeset sanity checksJohan Hovold
Drop the overly defensive modeset sanity checks of function parameters which have already been checked or used by the callers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502678/ Link: https://lore.kernel.org/r/20220913085320.8577-11-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bitsMarijn Suijten
According to the comment this DPU register contains the bits per pixel as a 6.4 fractional value, conveniently matching the contents of bits_per_pixel in struct drm_dsc_config which also uses 4 fractional bits. However, the downstream source this implementation was copy-pasted from has its bpp field stored _without_ fractional part. This makes the entire convoluted math obsolete as it is impossible to pull those 4 fractional bits out of thin air, by somehow trying to reuse the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??). The rest of the code merely attempts to keep the integer part a multiple of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel << 12; already filling up those bits anyway (but not on downstream). Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/508946/ Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dp: drop modeset sanity checksJohan Hovold
Drop the overly defensive modeset sanity checks of function parameters which have already been checked or used by the callers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502674/ Link: https://lore.kernel.org/r/20220913085320.8577-10-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()Dmitry Baryshkov
To continue the idea of failing the probe() rather than failing the bind(), move the call to msm_hdmi_get_phy() function to msm_hdmi_dev_probe(), so that the driver fails the probe if PHY is not yet available rather than succeeding the probe and then failing the bind() with -EPROBE_DEFER. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499652/ Link: https://lore.kernel.org/r/20220826093927.851597-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: don't take extra reference on PHY deviceDmitry Baryshkov
The of_find_device_by_node() already increments the device's usage count, so there is no need to increment it again using get_device(). Drop this extra get_device(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499648/ Link: https://lore.kernel.org/r/20220826093927.851597-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: move resource allocation to probe functionDmitry Baryshkov
Rather than having all resource allocation happen in the _bind function (resulting in possible EPROBE_DEFER returns and component bind/unbind cycles) allocate and check all resources in _probe function. While we are at it, use platform_get_irq() to get the IRQ rather than going through the irq_of_parse_and_map(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499649/ Link: https://lore.kernel.org/r/20220826093927.851597-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm: remove duplicated code from a6xx_create_address_spaceDmitry Baryshkov
The function a6xx_create_address_space() is mostly a copy of adreno_iommu_create_address_space() with added quirk setting. Rework these two functions to be a thin wrappers around a common helper. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/509614/ Link: https://lore.kernel.org/r/20221102175449.452283-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm: move domain allocation into msm_iommu_new()Dmitry Baryshkov
After the msm_iommu instance is created, the IOMMU domain is completely handled inside the msm_iommu code. Move the iommu_domain_alloc() call into the msm_iommu_new() to simplify callers code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/509615/ Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm/hdmi: drop constant resource names from platform configDmitry Baryshkov
All MSM HDMI devices use "core_physical" and "qfprom_physical" names for register areas. Drop them from the platform config. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499646/ Link: https://lore.kernel.org/r/20220826093927.851597-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm/hdmi: use devres helper for runtime PM managementDmitry Baryshkov
Use devm_pm_runtime_enable() to enable runtime PM. This way its effect will be reverted on device unbind/destruction. Fixes: 6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499647/ Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Refactor sc7280_pp locationRobert Foss
The sc7280_pp declaration is not located by the other _pp declarations, but rather hidden around the _merge_3d declarations. Let's fix this to avoid confusion. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/509153/ Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm: Add MSM_INFO_GET_FLAGSRob Clark
In some cases crosvm needs a way to query the cache flags to communicate them to the guest kernel for guest userspace mapping. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/504453/ Link: https://lore.kernel.org/r/20220923173307.2429872-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: use DEFINE_SHOW_ATTRIBUTE to simplify dpu_regset32Liu Shixin
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/504252/ Link: https://lore.kernel.org/r/20220922142147.3246649-1-liushixin2@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/mdp5: stop overriding drvdataDmitry Baryshkov
The rest of the code expects that master's device drvdata is the struct msm_drm_private instance. Do not override the mdp5's drvdata. Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/508334/ Link: https://lore.kernel.org/r/20221024152642.3213488-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: retry 3 times if set sink to D0 poweer state failedKuogee Hsieh
Bring sink out of D3 (power down) mode into D0 (normal operation) mode by setting DP_SET_POWER_D0 bit to DP_SET_POWER dpcd register. This patch will retry 3 times if written to DP_SET_POWER register failed. Changes in v5: -- split into two patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502536/ Link: https://lore.kernel.org/r/1662999830-13916-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Add support for P010 formatJessica Zhang
Add support for P010 color format. This adds support for both linear and compressed formats. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/500822/ Link: https://lore.kernel.org/r/20220901203422.217-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: replace variable err with len at dp_aux_link_power_up()Kuogee Hsieh
drm_dp_dpcd_readb() will return 1 to indicate one byte had been read successfully. This patch replace variable "err" with "len" have more correct meaning. changes in v5: -- split into 3 patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502533/ Link: https://lore.kernel.org/r/1662999830-13916-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Add support for XR30 formatJessica Zhang
Add support for XR30 color format. This supports both linear and compressed formats. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/500820/ Link: https://lore.kernel.org/r/20220901203422.217-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm: less magic numbers in msm_mdss_enableDmitry Baryshkov
Replace magic register writes in msm_mdss_enable() with version that contains less magic and more variable names that can be traced back to the dpu_hw_catalog or the downstream dtsi files. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489578/ Link: https://lore.kernel.org/r/20220615135935.87381-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02Merge remote-tracking branch 'msm/msm-fixes' into HEADDmitry Baryshkov
2022-10-27Merge tag 'drm-next-20221025' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
Xilinx ZynqMP DisplayPort bridge support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y1cdU4HJoy0Pr2sQ@pendragon.ideasonboard.com
2022-10-26drm/nouveau: Remove unused variableZack Rusin
Trivial removal of an unused variable. Not sure how it snuck by me and build bots in the 7c99616e3fe7. Fixes: 7c99616e3fe7 ("drm: Remove drm_mode_config::fb_base") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thomas Zimmermann <tzimemrmann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221021010703.536318-1-zack@kde.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-10-25Merge tag 'drm-misc-next-2022-10-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: - Documentation for page-flip flags Cross-subsystem Changes: - dma-buf: Add unlocked variant of vmapping and attachment-mapping functions Core Changes: - atomic-helpers: CRTC primary plane test fixes - connector: TV API consistency improvements, cmdline parsing improvements - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper - edid: Fixes for HFVSDB parsing, - fourcc: Addition of the Vivante tiled modifier - makefile: Sort and reorganize the objects files - mode_config: Remove fb_base from drm_mode_config_funcs - sched: Add a module parameter to change the scheduling policy, refcounting fix for fences - tests: Sort the Kunit tests in the Makefile, improvements to the DP-MST tests - ttm: Remove unnecessary drm_mm_clean() call Driver Changes: - New driver: ofdrm - Move all drivers to a common dma-buf locking convention - bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C - ast: Atomic Gamma LUT Support, Convert to SHMEM, various improvements - lcdif: Support for YUV planes - mgag200: Fix PLL Setup on some revisions - udl: Modesetting improvements, hot-unplug support - vc4: Fix support for PAL-M Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
2022-10-23Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"Jason A. Donenfeld
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-23Merge tag 'x86_urgent_for_v6.0_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "As usually the case, right after a major release, the tip urgent branches accumulate a couple more fixes than normal. And here is the x86, a bit bigger, urgent pile. - Use the correct CPU capability clearing function on the error path in Intel perf LBR - A CFI fix to ftrace along with a simplification - Adjust handling of zero capacity bit mask for resctrl cache allocation on AMD - A fix to the AMD microcode loader to attempt patch application on every logical thread - A couple of topology fixes to handle CPUID leaf 0x1f enumeration info properly - Drop a -mabi=ms compiler option check as both compilers support it now anyway - A couple of fixes to how the initial, statically allocated FPU buffer state is setup and its interaction with dynamic states at runtime" * tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap() ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph() x86/ftrace: Remove ftrace_epilogue() x86/resctrl: Fix min_cbm_bits for AMD x86/microcode/AMD: Apply the patch early on every logical thread x86/topology: Fix duplicated core ID within a package x86/topology: Fix multiple packages shown on a single-package system hwmon/coretemp: Handle large core ID value x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB x86/fpu: Exclude dynamic states from init_fpstate x86/fpu: Fix the init_fpstate size check with the actual size x86/fpu: Configure init_fpstate attributes orderly
2022-10-22Merge tag 'hwmon-for-v6.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - corsair-psu: Fix typo in USB id description, and add USB ID for new PSU - pwm-fan: Fix fan power handling when disabling fan control * tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Add USB id of the new HX1500i psu hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 hwmon: (corsair-psu) fix typo in USB id description
2022-10-22Merge tag 'i2c-for-6.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "RPM fix for qcom-cci, platform module alias for xiic, build warning fix for mlxbf, typo fixes in comments" * tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxbf: depend on ACPI; clean away ifdeffage i2c: fix spelling typos in comments i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter i2c: xiic: Add platform module alias
2022-10-22Merge tag 'pci-v6.1-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Revert a simplification that broke pci-tegra due to a masking error - Update MAINTAINERS for Kishon's email address change and TI DRA7XX/J721E maintainer change * tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
2022-10-22Merge tag 'media/v6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-22hwmon: (corsair-psu) Add USB id of the new HX1500i psuWilken Gottwalt
Also update the documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-21Merge tag 'thermal-6.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "This fixes the control CPU selection in the intel_powerclamp thermal driver" * tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel_powerclamp: Use first online CPU as control_cpu
generated by cgit (git 2.34.1) at 2025-05-22 00:01:11 +0000