summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20net: amd-xgbe: Disable the CDR workaround path for Yellow Carp DevicesRaju Rangoju
Yellow Carp Ethernet devices do not require Autonegotiation CDR workaround, hence disable the same. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20net: amd-xgbe: Alter the port speed bit rangeRaju Rangoju
Newer generation Hardware uses the slightly different port speed bit widths, so alter the existing port speed bit range to extend support to the newer generation hardware while maintaining the backward compatibility with older generation hardware. The previously reserved bits are now being used which then requires the adjustment to the BIT values, e.g.: Before: PORT_PROPERTY_0[22:21] - Reserved PORT_PROPERTY_0[26:23] - Supported Speeds After: PORT_PROPERTY_0[21] - Reserved PORT_PROPERTY_0[26:22] - Supported Speeds To make this backwards compatible, the existing BIT definitions for the port speeds are incremented by one to maintain the original position. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20net: amd-xgbe: Add Support for Yellow Carp Ethernet deviceRaju Rangoju
Yellow Carp Ethernet devices use the existing PCI ID but the window settings for the indirect PCS access have been altered. Add the check for Yellow Carp Ethernet devices to use the new register values. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20net: lan966x: Extend switchdev with fdb supportHoratiu Vultur
Extend lan966x driver with fdb support by implementing the switchdev calls SWITCHDEV_FDB_ADD_TO_DEVICE and SWITCHDEV_FDB_DEL_TO_DEVICE. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Extend switchdev bridge flagsHoratiu Vultur
Currently allow a port to be part or not of the multicast flooding mask. By implementing the switchdev calls SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add vlan support.Horatiu Vultur
Extend the driver to support vlan filtering by implementing the switchdev calls SWITCHDEV_OBJ_ID_PORT_VLAN, SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add support to offload the forwarding.Horatiu Vultur
This patch adds basic support to offload in the HW the forwarding of the frames. The driver registers to the switchdev callbacks and implements the callbacks for attributes SWITCHDEV_ATTR_ID_PORT_STP_STATE and SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME. It is not allowed to add a lan966x port to a bridge that contains a different interface than lan966x. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Remove .ndo_change_rx_flagsHoratiu Vultur
The function lan966x_port_change_rx_flags() was used only when IFF_PROMISC flag was set. In that case it was setting to copy all the frames to the CPU instead of removing any RX filters. Therefore remove it. Fixes: d28d6d2e37d10d ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: More MAC table functionalityHoratiu Vultur
This patch adds support for adding/removing mac entries in the SW list of entries and in the HW table. This is used by the bridge functionality. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: add support for interrupts from analyzerHoratiu Vultur
This patch adds support for handling the interrupts generated by the analyzer. Currently, only the MAC table generates these interrupts. The MAC table will generate an interrupt whenever it learns or forgets an entry in the table. It is the SW responsibility figure out which entries were added/removed. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add registers that are used for switch and vlan functionalityHoratiu Vultur
This patch adds the registers that will be used to enable switchdev and vlan functionality in the HW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: core: Extend devlink health reporter with new events and parametersDanielle Ratson
Extend the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging of hardware / firmware issues. Beside the test event ('MLXSW_REG_MFDE_EVENT_ID_TEST') that is triggered following the devlink health 'test' sub-command, the new events are used to report the triggering of asserts in firmware code ('MLXSW_REG_MFDE_EVENT_ID_FW_ASSERT') and hardware issues ('MLXSW_REG_MFDE_EVENT_ID_FATAL_CAUSE'). Each event is accompanied with a severity parameter and per-event parameters that are meant to help root cause the detected issue. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: reg: Extend MFDE register with new events and parametersDanielle Ratson
Extend the Monitoring Firmware Debug (MFDE) register with new events and their related parameters. These events will be utilized by devlink-health in the next patch. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: core: Convert a series of if statements to switch caseDanielle Ratson
Convert a series of if statements that handle different events to a switch case statement. Encapsulate the per-event code in different functions to simplify the code. This is a preparation for subsequent patches that will add more events that need to be handled. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: Fix naming convention of MFDE fieldsDanielle Ratson
Currently, the MFDE register field names are using the convention: reg_mfde_<NAME_OF_FIELD>, and do not consider the name of the MFDE event. Fix the field names so they fit the more accurate convention: reg_mfde_<NAME_OF_EVENT>_<NAME_OF_FIELD>. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20bnx2x: Invalidate fastpath HSI version for VFsManish Chopra
Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20bnx2x: Utilize firmware 7.13.21.0Manish Chopra
This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add index to flow_action_entry structureBaowen Zheng
Add index to flow_action_entry structure and delete index from police and gate child structure. We make this change to offload tc action for driver to identify a tc action. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: reject to offload tc actions in offload driversBaowen Zheng
A follow-up patch will allow users to offload tc actions independent of classifier in the software datapath. In preparation for this, teach all drivers that support offload of the flow tables to reject such configuration as currently none of them support it. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-12-17 Brett Creeley says: This patch series adds support in the iavf driver for communicating and using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN is very limited and covers all 802.1Q VLAN offloads and filtering with no granularity. The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility, and support for 802.1ad offloads and filtering. This includes the VF negotiating which VLAN offloads/filtering it's allowed, where VLAN tags should be inserted and/or stripped into and from descriptors, and the supported VLAN protocols. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-17net: ethernet: mtk_eth_soc: delete some dead codeDan Carpenter
The debugfs_create_dir() function never returns NULL. It does return error pointers but in normal situations like this there is no need to check for errors. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217071037.GE26548@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net: mtk_eth_soc: delete an unneeded variableDan Carpenter
There is already an "int err" declared at the start of the function so re-use that instead of declaring a shadow err variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217070735.GC26548@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17tsnep: Fix s390 devm_ioremap_resource warningGerhard Engleder
The following warning is fixed with additional config dependencies: s390-linux-ld: drivers/net/ethernet/engleder/tsnep_main.o: in function `tsnep_probe': tsnep_main.c:(.text+0x1de6): undefined reference to `devm_ioremap_resource' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20211216200154.1520-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17iavf: Restrict maximum VLAN filters for VIRTCHNL_VF_OFFLOAD_VLAN_V2Brett Creeley
For VIRTCHNL_VF_OFFLOAD_VLAN, PF's would limit the number of VLAN filters a VF was allowed to add. However, by the time the opcode failed, the VLAN netdev had already been added. VIRTCHNL_VF_OFFLOAD_VLAN_V2 added the ability for a PF to tell the VF how many VLAN filters it's allowed to add. Make changes to support that functionality. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 offload enable/disableBrett Creeley
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows the VF to support 802.1Q and 802.1ad VLAN insertion and stripping if successfully negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS. Multiple changes were needed to support this new functionality. 1. Added new aq_required flags to support any kind of VLAN stripping and insertion offload requests via virtchnl. 2. Added the new method iavf_set_vlan_offload_features() that's used during VF initialization, VF reset, and iavf_set_features() to set the aq_required bits based on the current VLAN offload configuration of the VF's netdev. 3. Added virtchnl handling for VIRTCHNL_OP_ENABLE_STRIPPING_V2, VIRTCHNL_OP_DISABLE_STRIPPING_V2, VIRTCHNL_OP_ENABLE_INSERTION_V2, and VIRTCHNL_OP_ENABLE_INSERTION_V2. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 hotpathBrett Creeley
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows the PF to set the location of the Tx and Rx VLAN tag for insertion and stripping offloads. In order to support this functionality a few changes are needed. 1. Add a new method to cache the VLAN tag location based on negotiated capabilities for the Tx and Rx ring flags. This needs to be called in the initialization and reset paths. 2. Refactor the transmit hotpath to account for the new Tx ring flags. When IAVF_TXR_FLAGS_VLAN_LOC_L2TAG2 is set, then the driver needs to insert the VLAN tag in the L2TAG2 field of the transmit descriptor. When the IAVF_TXRX_FLAGS_VLAN_LOC_L2TAG1 is set, then the driver needs to use the l2tag1 field of the data descriptor (same behavior as before). 3. Refactor the iavf_tx_prepare_vlan_flags() function to simplify transmit hardware VLAN offload functionality by only depending on the skb_vlan_tag_present() function. This can be done because the OS won't request transmit offload for a VLAN unless the driver told the OS it's supported and enabled. 4. Refactor the receive hotpath to account for the new Rx ring flags and VLAN ethertypes. This requires checking the Rx ring flags and descriptor status bits to determine the location of the VLAN tag. Also, since only a single ethertype can be supported at a time, check the enabled netdev features before specifying a VLAN ethertype in __vlan_hwaccel_put_tag(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev configBrett Creeley
Based on VIRTCHNL_VF_OFFLOAD_VLAN_V2, the VF can now support more VLAN capabilities (i.e. 802.1AD offloads and filtering). In order to communicate these capabilities to the netdev layer, the VF needs to parse its VLAN capabilities based on whether it was able to negotiation VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or neither of these. In order to support this, add the following functionality: iavf_get_netdev_vlan_hw_features() - This is used to determine the VLAN features that the underlying hardware supports and that can be toggled off/on based on the negotiated capabiltiies. For example, if VIRTCHNL_VF_OFFLOAD_VLAN_V2 was negotiated, then any capability marked with VIRTCHNL_VLAN_TOGGLE can be toggled on/off by the VF. If VIRTCHNL_VF_OFFLOAD_VLAN was negotiated, then only VLAN insertion and/or stripping can be toggled on/off. iavf_get_netdev_vlan_features() - This is used to determine the VLAN features that the underlying hardware supports and that should be enabled by default. For example, if VIRTHCNL_VF_OFFLOAD_VLAN_V2 was negotiated, then any supported capability that has its ethertype_init filed set should be enabled by default. If VIRTCHNL_VF_OFFLOAD_VLAN was negotiated, then filtering, stripping, and insertion should be enabled by default. Also, refactor iavf_fix_features() to take into account the new capabilities. To do this, query all the supported features (enabled by default and toggleable) and make sure the requested change is supported. If VIRTCHNL_VF_OFFLOAD_VLAN_V2 is successfully negotiated, there is no need to check VIRTCHNL_VLAN_TOGGLE here because the driver already told the netdev layer which features can be toggled via netdev->hw_features during iavf_process_config(), so only those features will be requested to change. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiationBrett Creeley
In order to support the new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability the VF driver needs to rework it's initialization state machine and reset flow. This has to be done because successful negotiation of VIRTCHNL_VF_OFFLOAD_VLAN_V2 requires the VF driver to perform a second capability request via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS before configuring the adapter and its netdev. Add the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit when sending the VIRTHCNL_OP_GET_VF_RESOURECES message. The underlying PF will either support VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or neither. Both of these offloads should never be supported together. Based on this, add 2 new states to the initialization state machine: __IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS __IAVF_INIT_CONFIG_ADAPTER The __IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS state is used to request/store the new VLAN capabilities if and only if VIRTCHNL_VLAN_OFFLOAD_VLAN_V2 was successfully negotiated in the __IAVF_INIT_GET_RESOURCES state. The __IAVF_INIT_CONFIG_ADAPTER state is used to configure the adapter/netdev after the resource requests have finished. The VF will move into this state regardless of whether it successfully negotiated VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2. Also, add a the new flag IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS and set it during VF reset. If VIRTCHNL_VF_OFFLOAD_VLAN_V2 was successfully negotiated then the VF will request its VLAN capabilities via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS during the reset. This is needed because the PF may change/modify the VF's configuration during VF reset (i.e. modifying the VF's port VLAN configuration). This also, required the VF to call netdev_update_features() since its VLAN features may change during VF reset. Make sure to call this under rtnl_lock(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17Merge tag 'wireless-drivers-next-2021-12-17' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 Second set of patches for v5.17, planning to do at least one more. Smaller new features, nothing special this time. Major changes: rtw88 * debugfs file to fix tx rate iwlwifi * support SAR GEO Offset Mapping (SGOM) via BIOS * support firmware API version 68 * add some new device IDs ath11k * support PCI devices with 1 MSI vector * WCN6855 hw2.1 support * 11d scan offload support * full monitor mode, only supported on QCN9074 * scan MAC address randomization support * reserved host DDR addresses from DT for PCI devices support ath9k * switch to rate table based lookup ath * extend South Korea regulatory domain support wcn36xx * beacon filter support * tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits) wcn36xx: Implement beacon filtering wcn36xx: Fix physical location of beacon filter comment wcn36xx: Fix beacon filter structure definitions ath11k: Use reserved host DDR addresses from DT for PCI devices dt: bindings: add new DT entry for ath11k PCI device support wilc1000: Improve WILC TX performance when power_save is off wl1251: specify max. IE length rsi: fix array out of bound wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq" wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx wilc1000: Rename irq handler from "WILC_IRQ" to netdev name wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi" wilc1000: Fix spurious "FW not responding" error wilc1000: Remove misleading USE_SPI_DMA macro wilc1000: Fix missing newline in error message wilc1000: Fix copy-and-paste typo in wilc_set_mac_address rtw89: coex: Update COEX to 5.5.8 rtw89: coex: Cancel PS leaving while C2H comes rtw89: coex: Update BT counters while receiving report rtw89: coex: Define LPS state for BTC using ... ==================== Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net: dsa: microchip: remove unneeded variableChangcheng Deng
Remove unneeded variable used to store return value. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mana: Add RX fencingDexuan Cui
RX fencing allows the driver to know that any prior change to the RQs has finished, e.g. when the RQs are disabled/enabled or the hashkey/indirection table are changed, RX fencing is required. Remove the previous workaround "ssleep(1)" and add the real support for RX fencing as the PF driver supports the MANA_FENCE_RQ request now (any old PF driver not supporting the request won't be used in production). Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/20211216001748.8751-1-decui@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: vertexcom: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/net/ethernet/vertexcom/mse102x.c:414:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20211216015433.83383-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16nfp: flower: refine the use of circular bufferYinjun Zhang
The current use of circular buffer to manage stats_context_id is very obscure, and it will cause problem if its element size is not power of two. So change the use more straightforward and scalable, and also change that for mask_id to keep consistency. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/1639618621-5857-1-git-send-email-yinjun.zhang@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16Merge tag 'net-5.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, wifi, bpf. Relatively large batches of fixes from BPF and the WiFi stack, calm in general networking. Current release - regressions: - dpaa2-eth: fix buffer overrun when reporting ethtool statistics Current release - new code bugs: - bpf: fix incorrect state pruning for <8B spill/fill - iavf: - add missing unlocks in iavf_watchdog_task() - do not override the adapter state in the watchdog task (again) - mlxsw: spectrum_router: consolidate MAC profiles when possible Previous releases - regressions: - mac80211 fixes: - rate control, avoid driver crash for retransmitted frames - regression in SSN handling of addba tx - a memory leak where sta_info is not freed - marking TX-during-stop for TX in in_reconfig, prevent stall - cfg80211: acquire wiphy mutex on regulatory work - wifi drivers: fix build regressions and LED config dependency - virtio_net: fix rx_drops stat for small pkts - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down() Previous releases - always broken: - bpf fixes: - kernel address leakage in atomic fetch - kernel address leakage in atomic cmpxchg's r0 aux reg - signed bounds propagation after mov32 - extable fixup offset - extable address check - mac80211: - fix the size used for building probe request - send ADDBA requests using the tid/queue of the aggregation session - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid deadlocks - validate extended element ID is present - mptcp: - never allow the PM to close a listener subflow (null-defer) - clear 'kern' flag from fallback sockets, prevent crash - fix deadlock in __mptcp_push_pending() - inet_diag: fix kernel-infoleak for UDP sockets - xsk: do not sleep in poll() when need_wakeup set - smc: avoid very long waits in smc_release() - sch_ets: don't remove idle classes from the round-robin list - netdevsim: - zero-initialize memory for bpf map's value, prevent info leak - don't let user space overwrite read only (max) ethtool parms - ixgbe: set X550 MDIO speed before talking to PHY - stmmac: - fix null-deref in flower deletion w/ VLAN prio Rx steering - dwmac-rk: fix oob read in rk_gmac_setup - ice: time stamping fixes - systemport: add global locking for descriptor life cycle" * tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits) bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 sit: do not call ipip6_dev_free() from sit_init_net() net: systemport: Add global locking for descriptor lifecycle net/smc: Prevent smc_release() from long blocking net: Fix double 0x prefix print in SKB dump virtio_net: fix rx_drops stat for small pkts dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED sfc_ef100: potential dereference of null pointer net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup net: usb: lan78xx: add Allied Telesis AT29M2-AF net/packet: rx_owner_map depends on pg_vec netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc dpaa2-eth: fix ethtool statistics ixgbe: set X550 MDIO speed before talking to PHY ...
2021-12-16Merge tag 'soc-fixes-5.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a number of DT fixes, mostly for mistakes found through static checking of the dts files again, as well as a couple of minor changes to address incorrect DT settings. For i.MX, there is yet another series of devitree changes to update RGMII delay settings for ethernet, which is an ongoing problem after some driver changes. For SoC specific device drivers, a number of smaller fixes came up: - i.MX SoC identification was incorrectly registered non-i.MX machines when the driver is built-in - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - a few compile fixes for warnings that get in the way of -Werror - a string overflow in the scpi firmware driver - a boot failure with FORTIFY_SOURCE on Rockchips machines - broken error handling in the AMD TEE driver - a revert for a tegra reset driver commit that broke HDA" * tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) soc/tegra: fuse: Fix bitwise vs. logical OR warning firmware: arm_scpi: Fix string overflow in SCPI genpd driver soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif ARM: socfpga: dts: fix qspi node compatible arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 tee: amdtee: fix an IS_ERR() vs NULL bug arm64: dts: apple: change ethernet0 device type to ethernet arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up ...
2021-12-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single fix for the clk framework that needed some more bake time in linux-next. The problem is that two clks being registered at the same time can lead to a busted clk tree if the parent isn't fully registered by the time the child finds the parent. We rejigger the place where we mark the parent as fully registered so that the child can't find the parent until things are proper" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Don't parent clks until the parent is fully registered
2021-12-16Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.17. Major changes: ath11k * support PCI devices with 1 MSI vector * WCN6855 hw2.1 support * 11d scan offload support * full monitor mode, only supported on QCN9074 * scan MAC address randomization support * reserved host DDR addresses from DT for PCI devices support ath9k * switch to rate table based lookup ath * extend South Korea regulatory domain support wcn36xx * beacon filter support
2021-12-16Merge tag 'for-5.16/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix use after free in DM btree remove's rebalance_children() - Fix DM integrity data corruption, introduced during 5.16 merge, due to improper use of bvec_kmap_local() * tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix data corruption due to improper use of bvec_kmap_local dm btree remove: fix use after free in rebalance_children()
2021-12-16net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli
The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16wcn36xx: Implement beacon filteringBryan O'Donoghue
The prima driver facilitates the direct programming of beacon filter tables via SMD commands. The purpose of beacon filters is quote: /* When beacon filtering is enabled, firmware will * analyze the selected beacons received during BMPS, * and monitor any changes in the IEs as listed below. * The format of the table is: * - EID * - Check for IE presence * - Byte offset * - Byte value * - Bit Mask * - Byte reference */ The default filter table looks something like this: tBeaconFilterIe gaBcnFilterTable[12] = { { WLAN_EID_DS_PARAMS, 0u, { 0u, 0u, 0u, 0u } }, { WLAN_EID_ERP_INFO, 0u, { 0u, 0u, 248u, 0u } }, { WLAN_EID_EDCA_PARAM_SET, 0u, { 0u, 0u, 240u, 0u } }, { WLAN_EID_QOS_CAPA, 0u, { 0u, 0u, 240u, 0u } }, { WLAN_EID_CHANNEL_SWITCH, 1u, { 0u, 0u, 0u, 0u } }, { WLAN_EID_QUIET, 1u, { 0u, 0u, 0u, 0u } }, { WLAN_EID_HT_OPERATION, 0u, { 0u, 0u, 0u, 0u } }, { WLAN_EID_HT_OPERATION, 0u, { 1u, 0u, 248u, 0u } }, { WLAN_EID_HT_OPERATION, 0u, { 2u, 0u, 235u, 0u } }, { WLAN_EID_HT_OPERATION, 0u, { 5u, 0u, 253u, 0u } }, { WLAN_EID_PWR_CONSTRAINT, 0u, { 0u, 0u, 0u, 0u } }, { WLAN_EID_OPMODE_NOTIF, 0u, { 0u, 0u, 0u, 0u } } }; Add in an equivalent filter set as present in the prima Linux driver. For now omit the beacon filter "rem" command as the driver does not have an explicit call to that SMD command. The filter mask should only count when we are inside BMPS anyway. Replicating the ability to program the filter table gives us scope to add and remove elements in future. For now though this patch makes the rote-copy of the downstream Linux beacon filter table, which we can tweak as desired from now on. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211214134630.2214840-4-bryan.odonoghue@linaro.org
2021-12-16wcn36xx: Fix physical location of beacon filter commentBryan O'Donoghue
The comment in the header with respect to beacon filtering makes a reference to "the structure above" and "the structure below" which would be informative if the comment appeared in the right place but, it does not. Fix the comment location so that it a least makes sense w/r/t the physical location statements. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211214134630.2214840-3-bryan.odonoghue@linaro.org
2021-12-16wcn36xx: Fix beacon filter structure definitionsBryan O'Donoghue
The beacon filter structures need to be packed. Right now its fine because we don't yet use these structures so just pack them without marking it for backporting. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211214134630.2214840-2-bryan.odonoghue@linaro.org
2021-12-16ath11k: Use reserved host DDR addresses from DT for PCI devicesAnilkumar Kolli
Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2) is reserved through DT entries for firmware usage. Send the base address from DT entries. If DT entry is available, PCI device will work with fixed_mem_region else host allocates multiple segments. IPQ8074 on HK10 board supports multiple PCI devices. IPQ8074 + QCN9074 is tested with this patch. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638789319-2950-2-git-send-email-akolli@codeaurora.org
2021-12-16Merge tag 'tegra-for-5.16-soc-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes soc/tegra: Fixes for v5.16-rc6 This contains a single build fix without which ARM allmodconfig builds are broken if -Werror is enabled. * tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix bitwise vs. logical OR warning Link: https://lore.kernel.org/r/20211215162618.3568474-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-16virtio_net: fix rx_drops stat for small pktsWenliang Wang
We found the stat of rx drops for small pkts does not increment when build_skb fail, it's not coherent with other mode's rx drops stat. Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16dsa: mv88e6xxx: fix debug print for SPEED_UNFORCEDAndrey Eremeev
Debug print uses invalid check to detect if speed is unforced: (speed != SPEED_UNFORCED) should be used instead of (!speed). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Eremeev <Axtone4all@yandex.ru> Fixes: 96a2b40c7bd3 ("net: dsa: mv88e6xxx: add port's MAC speed setter") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16sfc_ef100: potential dereference of null pointerJiasheng Jiang
The return value of kmalloc() needs to be checked. To avoid use in efx_nic_update_stats() in case of the failure of alloc. Fixes: b593b6f1b492 ("sfc_ef100: statistics gathering") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: prestera: flower template supportVolodymyr Mytnyk
Add user template explicit support. At this moment, max TCAM rule size is utilized for all rules, doesn't matter which and how much flower matches are provided by user. It means that some of TCAM space is wasted, which impacts the number of filters that can be offloaded. Introducing the template, allows to have more HW offloaded filters by specifying the template explicitly. Example: tc qd add dev PORT clsact tc chain add dev PORT ingress protocol ip \ flower dst_ip 0.0.0.0/16 tc filter add dev PORT ingress protocol ip \ flower skip_sw dst_ip 1.2.3.4/16 action drop NOTE: chain 0 is the default chain id for "tc chain" & "tc filter" command, so it is omitted in the example above. This patch adds only template support for default chain 0 suppoerted by prestera driver at this moment. Chains are not supported yet, and will be added later. Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-24 01:43:32 +0000