| Age | Commit message (Collapse) | Author |
|---|
|
uio_pdrv_genirq and uio_dmem_genirq interrupts are handled in
userspace. So the condition for the interrupt hasn't normally not been
cleared when top half returns. disable_irq_nosync is called in top half,
but since that normally is lazy the irq isn't actually disabled.
For level triggered interrupts this will always result in a spurious
additional fire since the level in to the interrupt controller still is
active. The actual interrupt handler isn't run though since this
spurious irq is just recorded, and later on discared (for level).
This commit disables lazy masking for level triggered interrupts. It
leaves edge triggered interrupts as before, because they work with the
lazy scheme.
All other UIO drivers already seem to clear the interrupt cause at
driver levels.
Example of double fire. First goes all the way up to
uio_pdrv_genirq_handler, second is terminated in handle_fasteoi_irq and
marked as pending.
<idle>-0 [000] d... 8.245870: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245873: uio_pdrv_genirq_handler: disable irq 29
<idle>-0 [000] d... 8.245878: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245880: handle_fasteoi_irq: irq 29 PENDING
HInt-34 [001] d... 8.245897: uio_pdrv_genirq_irqcontrol: enable irq 29
Tested on 5.7rc2 using uio_pdrv_genirq and a custom Xilinx MPSoC board.
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Link: https://lore.kernel.org/r/20200628141229.16121-1-thommyj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to the changes made in 270579d95f82 ("uio_mf624: Align memory
regions to page size and set correct offsets"), this will allow
uio_pdrv_genirq devices to expose memory regions that is not page-aligned,
requiring the users to respect the offset sysfs attribute (as implemented
in libuio).
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20200701145659.3978-4-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fixes sparse warnings: using plain integer as NULL pointer. Replaces
equal to with logical not operator.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1591193212-15082-1-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend Intel Remote System Update (RSU) driver to get decision
configuration management firmware (DCMF) versions and max retry
parameter value.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-4-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend Intel Stratix10 service layer driver to support new RSU DCMF
versions and max retry parameter.
DCMF = Decision Configuration Management Firmware. The max retry parameter
is the maximum times the images is allowed to reload itself before giving
up and starting RSU failover flow.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Formatting is correct and descriptions are all present, but some
of the argument names are not properly represented in the
documentation.
Fixes the following W=1 build warnings:
drivers/misc/ibmvmc.c:780: warning: Function parameter or member 'msg_len' not described in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:780: warning: Excess function parameter 'msg_length' description in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:1041: warning: Function parameter or member 'buffer' not described in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1041: warning: Excess function parameter 'buf' description in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1360: warning: Function parameter or member 'file' not described in 'ibmvmc_ioctl'
drivers/misc/ibmvmc.c:1360: warning: Excess function parameter 'session' description in 'ibmvmc_ioctl'
Cc: Steven Royer <seroyer@linux.ibm.com>
Cc: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Cc: Dave Engebretsen <engebret@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A nice attempt was made to provide kerneldoc headers for
read_template_version() and read_afu_lpc_memory_info() however,
the provided formatting does not match what is expected by
kerneldoc.
Fixes the following W=1 warnings:
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'dev' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'fn' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'len' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'version' not described in 'read_template_version'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'dev' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'fn' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'afu' not described in 'read_afu_lpc_memory_info'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function headers will need a lot of work before they reach the
standards expected of kerneldoc. Demote them down to basic
comments/headers, for now at least.
Fixes the following W=1 kernel build warnings:
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'unit_address' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'process_token' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'op' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p1' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p2' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p3' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p4' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'out' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:245: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_afu'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'unit_address' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'process_token' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'unit_address' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'process_token' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'unit_address' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'state' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'offset' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'len' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'cr_num' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'offset' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'len' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'unit_address' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'process_token' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'record' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'reg' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'unit_address' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'value' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'value' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'process_token' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'info' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'process_token' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'control_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'reset_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'op' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p1' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p2' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p3' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p4' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'out' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:516: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'op' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'num' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'out' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'num' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'out' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'unit_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'list_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'num' not described in 'cxl_h_validate_adapter_image'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly, for some reason documentation of all 'scifdev' arguments
are missing, so apply those. Also remove 2 descriptions of 'ep'
which appear to document non-existent function arguments.
drivers/misc/mic/scif/scif_rma.c:468: warning: Function parameter or member 'scifdev' not described in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:468: warning: Excess function parameter 'ep' description in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:510: warning: Excess function parameter 'ep' description in 'scif_destroy_remote_window'
drivers/misc/mic/scif/scif_rma.c:1045: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_req'
drivers/misc/mic/scif/scif_rma.c:1080: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_gnt_rej'
drivers/misc/mic/scif/scif_rma.c:1104: warning: Function parameter or member 'scifdev' not described in 'scif_free_virt'
drivers/misc/mic/scif/scif_rma.c:1142: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg'
drivers/misc/mic/scif/scif_rma.c:1178: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg'
drivers/misc/mic/scif/scif_rma.c:1243: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_ack'
drivers/misc/mic/scif/scif_rma.c:1262: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_nack'
drivers/misc/mic/scif/scif_rma.c:1280: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_ack'
drivers/misc/mic/scif/scif_rma.c:1299: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_nack'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly add missing descriptions for every use of 'scifdev', then
correct incorrect formatting of existing function argument descriptions
changing to the expected format of '@.*: ', finally add missing
description for function argument 'mark'.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_fence.c:19: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark'
drivers/misc/mic/scif/scif_fence.c:41: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark_resp'
drivers/misc/mic/scif/scif_fence.c:64: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait'
drivers/misc/mic/scif/scif_fence.c:101: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait_resp'
drivers/misc/mic/scif/scif_fence.c:122: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_local'
drivers/misc/mic/scif/scif_fence.c:143: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_remote'
drivers/misc/mic/scif/scif_fence.c:164: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_resp'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'epd' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'roff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'rval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'loff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'lval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'flags' not described in 'scif_send_fence_signal'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly demote scif_rma_destroy_tcw()'s header to a standard
comment as no attempt has been made to document any of the
function arguments. Secondly, provide missing description
for 'prot' for scif_register_temp().
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'mmn' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'start' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'len' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:344: warning: Function parameter or member 'prot' not described in 'scif_register_temp'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Includes; missing descriptions for function args, the promotion
of obvious kerneldoc headers and the mis-formatting of existing
argument descriptions.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_nm.c:19: warning: Function parameter or member 'node' not described in 'scif_invalidate_ep'
drivers/misc/mic/scif/scif_nm.c:173: warning: Function parameter or member 'node_id' not described in 'scif_disconnect_node'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Includes; missing function argument documentation, misnamed argument
tags, the promotion of obvious kerneldoc header candidates and an
ordering issue (functions must follow the kerneldoc which describes
them).
Fixes the following W=1 kernel build issues:
drivers/misc/mic/scif/scif_nodeqp.c:452: warning: Function parameter or member 'scifdev' not described in 'scif_node_connect'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Function parameter or member 'unused' not described in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Excess function parameter 'msg' description in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Function parameter or member 'unused' not described in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Excess function parameter 'msg' description in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:939: warning: Function parameter or member 'scifdev' not described in 'scif_node_add_nack'
drivers/misc/mic/scif/scif_nodeqp.c:988: warning: Function parameter or member 'scifdev' not described in 'scif_get_node_info_resp'
drivers/misc/mic/scif/scif_nodeqp.c:1070: warning: cannot understand function prototype: 'int scif_max_msg_id = SCIF_MAX_MSG; '
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Function parameter or member 'unused' not described in 'scif_loopb_wq_handler'
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Excess function parameter 'work' description in 'scif_loopb_wq_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason (copy 'n' paste error?) the passed in pointers to
'struct scif_dev scifdev' weren't described throughout the source
file. Change that.
Fixes the following W=1 kernel build warning(s):
drivers/misc/mic/scif/scif_epd.c:120: warning: Function parameter or member 'scifdev' not described in 'scif_cnctreq'
drivers/misc/mic/scif/scif_epd.c:166: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt'
drivers/misc/mic/scif/scif_epd.c:191: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_ack'
drivers/misc/mic/scif/scif_epd.c:213: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_nack'
drivers/misc/mic/scif/scif_epd.c:230: warning: Function parameter or member 'scifdev' not described in 'scif_cnctrej'
drivers/misc/mic/scif/scif_epd.c:255: warning: Function parameter or member 'scifdev' not described in 'scif_discnct'
drivers/misc/mic/scif/scif_epd.c:309: warning: Function parameter or member 'scifdev' not described in 'scif_discnt_ack'
drivers/misc/mic/scif/scif_epd.c:325: warning: Function parameter or member 'scifdev' not described in 'scif_clientsend'
drivers/misc/mic/scif/scif_epd.c:341: warning: Function parameter or member 'scifdev' not described in 'scif_clientrcvd'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'epd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'peer' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'newepd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'flags' not described in 'scif_accept'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'read_size' appears to have been assigned, but never used since the
SCIF messaging and node enumeration APIs were introduced in 2015.
Makes sense to simply remove it.
Fixes the following W=1 warning:
drivers/misc/mic/scif/scif_api.c: In function ‘_scif_recv’:
drivers/misc/mic/scif/scif_api.c:1000:6: warning: variable ‘read_size’ set but not used [-Wunused-but-set-variable]
1000 | int read_size;
| ^~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 's' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 'unused' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 's' not described in 'force_reset_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 'pos' not described in 'force_reset_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__scif_get_port() has never taken 'port' as an argument since
its inception back in 2015. Probably document the proper arguments
expected 'start' and 'end'.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'start' not described in '__scif_get_port
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'end' not described in '__scif_get_port'
drivers/misc/mic/scif/scif_ports.c:36: warning: Excess function parameter 'port' description in '__scif_get_port'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning:
drivers/misc/mic/cosm/cosm_main.c:31: warning: Function parameter or member 'force' not described in 'cosm_hw_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_debugfs.c:108: warning: Function parameter or member 'mdev' not described in 'mic_create_debug_dir'
drivers/misc/mic/host/mic_debugfs.c:131: warning: Function parameter or member 'mdev' not described in 'mic_delete_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 's' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 'unused' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:53: warning: Function parameter or member 'mdrv' not described in 'mic_create_card_debug_dir'
drivers/misc/mic/card/mic_debugfs.c:67: warning: Function parameter or member 'mdrv' not described in 'mic_delete_card_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_x100.c:127: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_sbox_intr'
drivers/misc/mic/host/mic_x100.c:148: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_rdmasr_intr'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'dma_addr' not described in 'mic_x100_smpt_set'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'index' not described in 'mic_x100_smpt_set'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mic_interrupt() and mic_setup_msix() have incomplete documentation.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'irq' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'dev' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:188: warning: Function parameter or member 'pdev' not described in 'mic_setup_msix'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message_size' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:55: warning: Function parameter or member 'sp' not described in 'ibmasm_send_driver_vpd'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'sp' not described in 'ibmasm_send_os_state'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'os_state' not described in 'ibmasm_send_os_state'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mic_x100_intr_init[] is only ever used in mic_x100.c, so instead
of listing to the compiler complain about unused static arrays
simply move it into the c-file for direct consumption. This way
it can stay 'static'.
Fixes the following W=1 kernel build warning:
In file included from drivers/misc/mic/host/mic_main.c:17:
drivers/misc/mic/host/mic_x100.h:70:18: warning: ‘mic_x100_intr_init’ defined but not used [-Wunused-const-variable=]
70 | static const u16 mic_x100_intr_init[] = {
| ^~~~~~~~~~~~~~~~~~
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'sp' not described in 'ibmasm_start_reverse_heartbeat'
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'rhb' not described in 'ibmasm_start_reverse_heartbeat'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'sp' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'cmd' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'cmd' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'timeout' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'response' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'size' not described in 'ibmasm_receive_command_response'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data_size' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'sp' not described in 'ibmasm_get_next_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'reader' not described in 'ibmasm_get_next_event'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These functions are not exported and no external prototypes exist
Fixes W=1 kernel build warning(s):
drivers/misc/sgi-xp/xp_main.c:227:1: warning: no previous prototype for ‘xp_init’ [-Wmissing-prototypes]
227 | xp_init(void)
| ^~~~~~~
drivers/misc/sgi-xp/xp_main.c:250:1: warning: no previous prototype for ‘xp_exit’ [-Wmissing-prototypes]
250 | xp_exit(void)
| ^~~~~~~
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kerneldoc does not understand file headers. There is therefor
no reason for them to use the syntax.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There has been no attempt to provide documentation for these function's
arguments, so align with the remainder of the file and just treat
them as standards function headers.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'n' not described in 'genwqe_is_visible'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
re-ordering of #defines i.e. not placed between kerneldoc headers
and the functions they are documenting and re-documenting of changed/
renamed arguments.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_ddcb.c:83: warning: Function parameter or member 'queue' not described in 'queue_empty'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'cd' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'queue' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'ddcb_no' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'req' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'ddcb_no' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:364: warning: Function parameter or member 'queue' not described in 'genwqe_check_ddcb_queue'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'queue' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'num' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Function parameter or member 'cmd' not described in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Excess function parameter 'req' description in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:972: warning: Function parameter or member 'cd' not described in 'genwqe_next_ddcb_ready'
drivers/misc/genwqe/card_ddcb.c:1002: warning: Function parameter or member 'cd' not described in 'genwqe_ddcbs_in_flight'
drivers/misc/genwqe/card_ddcb.c:1181: warning: Function parameter or member 'data' not described in 'genwqe_card_thread'
drivers/misc/genwqe/card_ddcb.c:1308: warning: Function parameter or member 'cd' not described in 'queue_wake_up_all'
drivers/misc/genwqe/card_ddcb.c:1333: warning: Function parameter or member 'cd' not described in 'genwqe_finish_queue'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
repairing formatting (kerneldoc does not like blank lines) and the
demotion of a kerneldoc header which shows no interest in providing
documentation for any of its arguments.
Fixes this the following W=1 issues:
drivers/misc/genwqe/card_utils.c:37: warning: Incorrect use of kernel-doc format: * __genwqe_writeq() - Write 64-bit register
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'cd' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'byte_offs' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'val' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'cd' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'app_name' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'len' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:186: warning: bad line:
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'cd' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'sgl' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_addr' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_size' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'write' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'cd' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'sgl' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:716: warning: Function parameter or member 'count' not described in 'genwqe_set_interrupt_capability'
drivers/misc/genwqe/card_utils.c:747: warning: Function parameter or member 'idx' not described in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:747: warning: Excess function parameter 'index' description in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'max_regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'cd' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'reg' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'val' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'func' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'cd' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'reg' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'func' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:995: warning: Function parameter or member 'cd' not described in 'genwqe_base_clock_frequency'
drivers/misc/genwqe/card_utils.c:1012: warning: Function parameter or member 'cd' not described in 'genwqe_stop_traps'
drivers/misc/genwqe/card_utils.c:1022: warning: Function parameter or member 'cd' not described in 'genwqe_start_traps'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
#
# Date: Mon Jun 29 10:30:56 2020 +0100
#
# On branch tb-mfd-fix-warnings
# Changes to be committed:
# modified: drivers/misc/genwqe/card_utils.c
#
# Untracked files:
# qemu-i2c-devs.txt
#
Link: https://lore.kernel.org/r/20200701085853.164358-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including; add missing documentation for function arguments, re-ordering
of #defines i.e. not placed between kerneldoc headers and the functions
they are documenting, demotion of file header/comment from kerneldoc
format and removal of documentation for non-existent args.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
>From missing documentation for function arguments, to promotion
obvious kerneldoc headers and incorrectly named arguments.
Fixes the following W=1 warnings:
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:617: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:760: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:889: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1046: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1131: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1207: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
genwqe_recover_card()'s function arguments were missing from its
kerneldoc header. Provide descriptions for 'cd' and 'fatal_err'.
Fixes the following kernel build W=1 warning:
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable 'rc' hasn't been checked since the driver's inception
in 2013. If it hasn't caused any issues since then, it's unlikely
to in the future. Let's take it out for now.
Fixes the following W=1 kernel build warning(s):
drivers/misc/genwqe/card_base.c: In function ‘genwqe_health_check_stop’:
/home/lee/projects/linux/kernel/drivers/misc/genwqe/card_base.c:1046:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
enclosure_remove_device() hasn't taken an 'int component for over a decade.
Instead use kerneldoc to describe the 'struct device' actually passed in.
Fixes the following W=1 kernel build warning(s):
drivers/misc/enclosure.c:400: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:400: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'offset_address'
Probably a copy 'n' paste error, 'offset_address' has never been
part of the pch_phub_{read,write}_gbe_mac_addr() functions.
Squashes the following W=1 warnings:
drivers/misc/pch_phub.c:450: warning: Excess function parameter 'offset_address' description in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Excess function parameter 'offset_address' description in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason (probably copy 'n' paste) kerneldoc descriptions
were missing for all instances of 'chip'. Providing them squashes
the following W=1 kernel build warnings:
drivers/misc/pch_phub.c:145: warning: Function parameter or member 'chip' not described in 'pch_phub_read_modify_write_reg'
drivers/misc/pch_phub.c:282: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom'
drivers/misc/pch_phub.c:296: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom'
drivers/misc/pch_phub.c:334: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom_val'
drivers/misc/pch_phub.c:350: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom_val'
drivers/misc/pch_phub.c:450: warning: Function parameter or member 'chip' not described in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Function parameter or member 'chip' not described in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's odd for the return value to be assigned to a variable so many
times, but never actually checked, but this has been the case since
the driver's inception in 2012. If it hasn't caused any issues by
now, it's probably unlikely to. Let's take it out, at least until
someone finds a reason to start using it.
Fixes the following W=1 kernel build warning:
drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’:
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly some missing function argument documentation, then some
whch are present, but are incorrectly named.
Fixes the following W=1 kernel build warnings:
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gaudi_pb_set_block()'s argument 'base' was incorrectly named 'block' in
its function header.
Fixes the following W=1 kernel build warning(s):
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Function parameter or member 'base' not described in 'gaudi_pb_set_block'
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Excess function parameter 'block' description in 'gaudi_pb_set_block'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
W=1 kernel builds report a lack of description of gaudi_set_asic_funcs()'s
'hdev' argument. In reality it is documented, but the formatting
was not as expected '@.*:'. Instead, there was a misplaced asterisk
which was confusing the kerneldoc validator.
Squashes the following W=1 warning:
drivers/misc/habanalabs/gaudi/gaudi.c:6746: warning: Function parameter or member 'hdev' not described in 'gaudi_set_asic_funcs'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No attempt to check the return value of RREG32() has been made
since the call was introduced a year ago.
Fixes W=1 kernel build warning:
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'dma_mask' is not passed directly into hl_pci_set_dma_mask() as
an argument. Instead, it is pulled from struct hl_device *hdev.
Fixed the following W=1 warning:
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Seeing as 'addr' is unsigned, it would be impossible for the assigned
value to be anything other than zero or positive.
Squashes the following W=1 warnings:
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read32’:
drivers/misc/habanalabs/goya/goya.c:3945:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
3945 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write32’:
drivers/misc/habanalabs/goya/goya.c:4002:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4002 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read64’:
drivers/misc/habanalabs/goya/goya.c:4047:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4047 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write64’:
drivers/misc/habanalabs/goya/goya.c:4091:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4091 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
W=1 kernel builds report a lack of descriptions for various
function arguments. In reality they are documented, but the
formatting was not as expected '@.*:'. Instead, '-'s were
used as separators.
While we're here, the headers for functions various functions
were written in kerneldoc format, but lack the kerneldoc
identifier '/**'. Let's promote them so they can gain access
to the checker.
This change fixes the following W=1 warnings:
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_work' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'hdev' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_entry' not described in 'hl_eqe_work'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hl_pci_bars_map() has a miss-typed argument name in the function
description. hl_pci_elbi_write() was missing documented arguments.
The headers for functions hl_pci_bars_unmap(), hl_pci_elbi_write()
and hl_pci_reset_link_through_bridge() were written in kerneldoc
format, but lack the kerneldoc identifier '/**'. Let's promote
them so they can gain access to the checker.
These changes fix the following W=1 kernel build warnings:
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
function header
Looks as though documentation for these function arguments have
been missing since the driver's inception last year.
Fixes the following W=1 kernel build warnings:
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'fw_name' not described in 'hl_fw_load_fw_to_device'
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'dst' not described in 'hl_fw_load_fw_to_device'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
