summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-17bonding: force carrier update when releasing slaveZhang Changzhong
In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17nfp: flower: netdev offload check for ip6gretapDanie du Toit
IPv6 GRE tunnels are not being offloaded, this is caused by a missing netdev offload check. The functionality of IPv6 GRE tunnel offloading was previously added but this check was not included. Adding the ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly. Fixes: f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading") Signed-off-by: Danie du Toit <danie.dutoit@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rtEric Dumazet
Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: dsa: lan9303: add VLAN IDs to master deviceMans Rullgard
If the master device does VLAN filtering, the IDs used by the switch must be added for any frames to be received. Do this in the port_enable() function, and remove them in port_disable(). Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"Jonas Gorski
This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990Daniele Palmas
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-16net: dsa: lantiq_gswip: fix use after free in gswip_remove()Alexey Khoroshilov
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16Merge tag 'mmc-v5.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)" * tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix read single on recovery logic
2022-02-16tty: n_tty: do not look ahead for EOL character past the end of the bufferLinus Torvalds
Daniel Gibson reports that the n_tty code gets line termination wrong in very specific cases: "If you feed a line with exactly 64 chars + terminating newline, and directly afterwards (without reading) another line into a pseudo terminal, the the first read() on the other side will return the 64 char line *without* terminating newline, and the next read() will return the missing terminating newline AND the complete next line (if it fits in the buffer)" and bisected the behavior to commit 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer"). Now, digging deeper, it turns out that the behavior isn't exactly new: what changed in commit 3b830a9c34d5 was that the tty line discipline .read() function is now passed an intermediate kernel buffer rather than the final user space buffer. And that intermediate kernel buffer is 64 bytes in size - thus that special case with exactly 64 bytes plus terminating newline. The same problem did exist before, but historically the boundary was not the 64-byte chunk, but the user-supplied buffer size, which is obviously generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which would hide the issue entirely). The reason is that the n_tty canon_copy_from_read_buf() code would look ahead for the EOL character one byte further than it would actually copy. It would then decide that it had found the terminator, and unmark it as an EOL character - which in turn explains why the next read wouldn't then be terminated by it. Now, the reason it did all this in the first place is related to some historical and pretty obscure EOF behavior, see commit ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") and commit 40d5e0905a03 ("n_tty: Fix EOF push handling"). And the reason for the EOL confusion is that we treat EOF as a special EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR" in the kernel sources). So that EOF look-ahead also affects the normal EOL handling. This patch just removes the look-ahead that causes problems, because EOL is much more critical than the historical "EOF in the middle of a line that coincides with the end of the buffer" handling ever was. Now, it is possible that we should indeed re-introduce the "look at next character to see if it's a EOF" behavior, but if so, that should be done not at the kernel buffer chunk boundary in canon_copy_from_read_buf(), but at a higher level, when we run out of the user buffer. In particular, the place to do that would be at the top of 'n_tty_read()', where we check if it's a continuation of a previously started read, and there is no more buffer space left, we could decide to just eat the __DISABLED_CHAR at that point. But that would be a separate patch, because I suspect nobody actually cares, and I'd like to get a report about it before bothering. Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer") Fixes: ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611 Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - memory leak fix for hid-elo driver (Dongliang Mu) - fix for hangs on newer AMD platforms with amd_sfh-driven hardware (Basavaraj Natikar ) - locking fix in i2c-hid (Daniel Thompson) - a few device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: amd_sfh: Add interrupt handler to process interrupts HID: amd_sfh: Add functionality to clear interrupts HID: amd_sfh: Disable the interrupt for all command HID: amd_sfh: Correct the structure field name HID: amd_sfh: Handle amd_sfh work buffer in PM ops HID:Add support for UGTABLET WP5540 HID: amd_sfh: Add illuminance mask to limit ALS max value HID: amd_sfh: Increase sensor command timeout HID: i2c-hid: goodix: Fix a lockdep splat HID: elo: fix memory leak in elo_probe HID: apple: Set the tilde quirk flag on the Wellspring 5 and later
2022-02-15Merge tag 'for-5.17/parisc-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Fix miscompilations when function calls are made from inside a put_user() call - Drop __init from map_pages() declaration to avoid random boot crashes - Added #error messages if a 64-bit compiler was used to build a 32-bit kernel (and vice versa) - Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma drivers - Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel test robot errors - Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC * tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: serial: parisc: GSC: fix build when IOSAPIC is not set parisc: Fix some apparent put_user() failures parisc: Show error if wrong 32/64-bit compiler is being used parisc: Add ioread64_lo_hi() and iowrite64_lo_hi() parisc: Fix sglist access in ccio-dma.c parisc: Fix data TLB miss in sba_unmap_sg parisc: Drop __init from map_pages declaration
2022-02-15Merge tag 'hyperv-fixes-signed-20220215' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Rework use of DMA_BIT_MASK in vmbus to work around a clang bug (Michael Kelley) - Fix NUMA topology (Long Li) - Fix a memory leak in vmbus (Miaoqian Lin) - One minor clean-up patch (Cai Huoqing) * tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: utils: Make use of the helper macro LIST_HEAD() Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64) Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
2022-02-15CDC-NCM: avoid overflow in sanity checkingOliver Neukum
A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()Vladimir Oltean
ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15bonding: fix data-races around agg_select_timerEric Dumazet
syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-eth: Initialize mutex used in one step timestamping pathRadu Bulie
1588 Single Step Timestamping code path uses a mutex to enforce atomicity for two events: - update of ptp single step register - transmit ptp event packet Before this patch the mutex was not initialized. This caused unexpected crashes in the Tx function. Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_keyTom Rix
Clang static analysis reports this representative problem dpaa2-switch-flower.c:616:24: warning: The right operand of '==' is a garbage value tmp->cfg.vlan_id == vlan) { ^ ~~~~ vlan is set in dpaa2_switch_flower_parse_mirror_key(). However this function can return success without setting vlan. So change the default return to -EOPNOTSUPP. Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15Merge tag 'ieee802154-for-net-2022-02-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== Only a single fix this time. Miquel Raynal fixed the lifs/sifs periods in the ca82010 to take the actual symbol duration time into account. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15net: phy: mediatek: remove PHY mode check on MT7531DENG Qingfang
The function mt7531_phy_mode_supported in the DSA driver set supported mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL for the internal PHY, so this check breaks the PHY initialization: mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL Remove the check to make it work again. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2022-02-14Merge tag 'regulator-fix-v5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "One fix here, for initialisation of regulators that don't have an in_enabled() operation which would mainly impact cases where they aren't otherwise used during early setup for some reason" * tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix false positive in regulator_late_cleanup()
2022-02-14HID: amd_sfh: Add interrupt handler to process interruptsBasavaraj Natikar
On newer AMD platforms with SFH, it is observed that random interrupts get generated on the SFH hardware and until this is cleared the firmware sensor processing is stalled, resulting in no data been received to driver side. Add routines to handle these interrupts, so that firmware operations are not stalled. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Add functionality to clear interruptsBasavaraj Natikar
Newer AMD platforms with SFH may generate interrupts on some events which are unwarranted. Until this is cleared the actual MP2 data processing maybe stalled in some cases. Add a mechanism to clear the pending interrupts (if any) during the driver initialization and sensor command operations. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Disable the interrupt for all commandBasavaraj Natikar
Sensor data is processed in polling mode. Hence disable the interrupt for all sensor command. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Correct the structure field nameBasavaraj Natikar
Misinterpreted intr_enable field name. Hence correct the structure field name accordingly to reflect the functionality. Fixes: f264481ad614 ("HID: amd_sfh: Extend driver capabilities for multi-generation support") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Handle amd_sfh work buffer in PM opsBasavaraj Natikar
Since in the current amd_sfh design the sensor data is periodically obtained in the form of poll data, during the suspend/resume cycle, scheduling a delayed work adds no value. So, cancel the work and restart back during the suspend/resume cycle respectively. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14USB: zaurus: support another broken ZaurusOliver Neukum
This SL-6000 says Direct Line, not Ethernet v2: added Reporter and Link Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Ross Maynard <bids.7405@bigpond.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLANVladimir Oltean
mv88e6xxx is special among DSA drivers in that it requires the VTU to contain the VID of the FDB entry it modifies in mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP. Sometimes due to races this is not always satisfied even if external code does everything right (first deletes the FDB entries, then the VLAN), because DSA commits to hardware FDB entries asynchronously since commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification"). Therefore, the mv88e6xxx driver must close this race condition by itself, by asking DSA to flush the switchdev workqueue of any FDB deletions in progress, prior to exiting a VLAN. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14ice: enable parsing IPSEC SPI headers for RSSJesse Brandeburg
The COMMS package can enable the hardware parser to recognize IPSEC frames with ESP header and SPI identifier. If this package is available and configured for loading in /lib/firmware, then the driver will succeed in enabling this protocol type for RSS. This in turn allows the hardware to hash over the SPI and use it to pick a consistent receive queue for the same secure flow. Without this all traffic is steered to the same queue for multiple traffic threads from the same IP address. For that reason this is marked as a fix, as the driver supports the model, but it wasn't enabled. If the package is not available, adding this type will fail, but the failure is ignored on purpose as it has no negative affect. Fixes: c90ed40cefe1 ("ice: Enable writing hardware filtering tables") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13Merge tag 'irq-urgent-2022-02-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Interrupt chip driver fixes: - Don't install an hotplug notifier for GICV3-ITS on systems which do not need it to prevent a warning in the notifier about inconsistent state - Add the missing device tree matching for the T-HEAD PLIC variant so the related SoC is properly supported" * tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/sifive-plic: Add missing thead,c900-plic match string dt-bindings: update riscv plic compatible string irqchip/gic-v3-its: Skip HP notifier when no ITS is registered
2022-02-13Merge tag 'irqchip-fixes-5.17-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Don't register a hotplug notifier on GICv3 systems that advertise LPI support, but have no ITS to make use of it - Add missing DT matching for the thead,c900-plic variant of the SiFive PLIC Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org
2022-02-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in the lpfc driver. One changing the classification of trace messages and the other fixing a build issue when NVME_FC is disabled" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Reduce log messages seen after firmware download scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled
2022-02-12Merge tag 'char-misc-5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a small number of char/misc driver fixes for 5.17-rc4 for reported issues. They contain: - phy driver fixes - iio driver fix - eeprom driver fix - speakup regression fix - fastrpc fix All of these have been in linux-next with no reported issues" * tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL speakup-dectlk: Restore pitch setting bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W bus: mhi: pci_generic: Add mru_default for Foxconn SDX55 eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX misc: fastrpc: avoid double fput() on failed usercopy phy: dphy: Correct clk_pre parameter phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() phy: xilinx: zynqmp: Fix bus width setting for SGMII phy: cadence: Sierra: fix error handling bugs in probe() phy: ti: Fix missing sentinel for clk_div_table phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option phy: usb: Leave some clocks running during suspend
2022-02-12Merge tag 'staging-5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pullstaging driver fixes from Greg KH: "Here are two staging driver fixes for 5.17-rc4. These are: - fbtft error path fix - vc04_services rcu dereference fix Both of these have been in linux-next for a while with no reported issues" * tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fbtft: Fix error path in fbtft_driver_module_init() staging: vc04_services: Fix RCU dereference check
2022-02-12Merge tag 'tty-5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are four small tty/serial fixes for 5.17-rc4. They are: - 8250_pericom change revert to fix a reported regression - two speculation fixes for vt_ioctl - n_tty regression fix for polling All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt_ioctl: add array_index_nospec to VT_ACTIVATE vt_ioctl: fix array_index_nospec in vt_setactivate serial: 8250_pericom: Revert "Re-enable higher baud rates" n_tty: wake up poll(POLLRDNORM) on receiving data
2022-02-12Merge tag 'usb-5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.17-rc4 that resolve some reported issues and add new device ids: - usb-serial new device ids - ulpi cleanup fixes - f_fs use-after-free fix - dwc3 driver fixes - ax88179_178a usb network driver fix - usb gadget fixes There is a revert at the end of this series to resolve a build problem that 0-day found yesterday. Most of these have been in linux-next, except for the last few, and all have now passed 0-day tests" * tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured" usb: dwc2: drd: fix soft connect when gadget is unconfigured usb: gadget: rndis: check size of RNDIS_MSG_SET command USB: gadget: validate interface OS descriptor requests usb: core: Unregister device on component_add() failure net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup usb: dwc3: gadget: Prevent core from processing stale TRBs USB: serial: cp210x: add CPI Bulk Coin Recycler id USB: serial: cp210x: add NCR Retail IO box id USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 usb: gadget: f_uac2: Define specific wTerminalType usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition usb: raw-gadget: fix handling of dual-direction-capable endpoints usb: usb251xb: add boost-up property support usb: ulpi: Call of_node_put correctly usb: ulpi: Move of_node_put to ulpi_dev_release USB: serial: option: add ZTE MF286D modem USB: serial: ch341: add support for GW Instek USB2.0-Serial devices usb: f_fs: Fix use-after-free for epfile usb: dwc3: xilinx: fix uninitialized return value
2022-02-12Merge tag 's390-5.17-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: "Maintainers and reviewers changes: - Add Alexander Gordeev as maintainer for s390. - Christian Borntraeger will focus on s390 KVM maintainership and stays as s390 reviewer. Fixes: - Fix clang build of modules loader KUnit test. - Fix kernel panic in CIO code on FCES path-event when no driver is attached to a device or the driver does not provide the path_event function" * tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: verify the driver availability for path_event call s390/module: fix building test_modules_helpers.o with clang MAINTAINERS: downgrade myself to Reviewer for s390 MAINTAINERS: add Alexander Gordeev as maintainer for s390
2022-02-12Merge tag 'for-linus-5.17a-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - Two small cleanups - Another fix for addressing the EFI framebuffer above 4GB when running as Xen dom0 - A patch to let Xen guests use reserved bits in MSI- and IO-APIC- registers for extended APIC-IDs the same way KVM guests are doing it already * tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pci: Make use of the helper macro LIST_HEAD() xen/x2apic: Fix inconsistent indenting xen/x86: detect support for extended destination ID xen/x86: obtain full video frame buffer address for Dom0 also under EFI
2022-02-12Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"Greg Kroah-Hartman
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87. It causes build errors as reported by the kernel test robot. Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: stable@kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11atl1c: fix tx timeout after link flap on Mikrotik 10/25G NICGatis Peisenieks
If NIC had packets in tx queue at the moment link down event happened, it could result in tx timeout when link got back up. Since device has more than one tx queue we need to reset them accordingly. Fixes: 057f4af2b171 ("atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC") Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Link: https://lore.kernel.org/r/20220211065123.4187615-1-gatis@mikrotik.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-11mctp: serial: Cancel pending work from ndo_uninit handlerJeremy Kerr
We cannot do the cancel_work_sync from after the unregister_netdev, as the dev pointer is no longer valid, causing a uaf on ldisc unregister (or device close). Instead, do the cancel_work_sync from the ndo_uninit op, where the dev still exists, but the queue has stopped. Fixes: 7bd9890f3d74 ("mctp: serial: cancel tx work on ldisc close") Reported-by: Luo Likang <luolikang@nsfocus.com> Tested-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20220211011552.1861886-1-jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-11net: dsa: lan9303: fix reset on probeMans Rullgard
The reset input to the LAN9303 chip is active low, and devicetree gpio handles reflect this. Therefore, the gpio should be requested with an initial state of high in order for the reset signal to be asserted. Other uses of the gpio already use the correct polarity. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fianelil <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-11Merge tag 'soc-fixes-5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a fairly large set of bugfixes, most of which had been sent a while ago but only now made it into the soc tree: Maintainer file updates: - Claudiu Beznea now co-maintains the at91 soc family, replacing Ludovic Desroches. - Michael Walle maintains the sl28cpld drivers - Alain Volmat and Raphael Gallais-Pou take over some drivers for ST platforms - Alim Akhtar is an additional reviewer for Samsung platforms Code fixes: - Op-tee had a problem with object lifetime that needs a slightly complex fix, as well as another bug with error handling. - Several minor issues for the OMAP platform, including a regression with the timer - A Kconfig change to fix a build-time issue on Intel SoCFPGA Device tree fixes: - The Amlogic Meson platform fixes a boot regression on am1-odroid, a spurious interrupt, and a problem with reserved memory regions - In the i.MX platform, several bug fixes are needed to make devices work correctly: SD card detection, alarmtimer, and sound card on some board. One patch for the GPU got in there by accident and gets reverted again. - TI K3 needs a fix for J721S2 serial port numbers - ux500 needs a fix to mount the SD card as root on the Skomer phone" * tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits) Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu" arm64: Remove ARCH_VULCAN MAINTAINERS: add myself as a maintainer for the sl28cpld MAINTAINERS: add IRC to ARM sub-architectures and Devicetree MAINTAINERS: arm: samsung: add Git tree and IRC ARM: dts: Fix boot regression on Skomer ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property soc: aspeed: lpc-ctrl: Block error printing on probe defer cases docs/ABI: testing: aspeed-uart-routing: Escape asterisk MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers MAINTAINERS: Update Benjamin Gaignard maintainer status ARM: socfpga: fix missing RESET_CONTROLLER arm64: dts: meson-sm1-odroid: fix boot loop after reboot arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610 arm64: dts: meson-g12: add ATF BL32 reserved-memory region arm64: dts: meson-gx: add ATF BL32 reserved-memory region arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2 arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133' optee: use driver internal tee_context for some rpc ...
2022-02-11Merge tag 'pci-v5.17-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: "Revert a commit that reduced the number of IRQs used but resulted in interrupt storms (Bjorn Helgaas)" * tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI/portdrv: Do not setup up IRQs if there are no users"
2022-02-11Revert "PCI/portdrv: Do not setup up IRQs if there are no users"Bjorn Helgaas
This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009. 0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users") reduced usage of IRQs when we don't think we need them. But Joey, Sergiu, and David reported choppy GUI rendering, systems that became unresponsive every few seconds, incorrect values reported by cpufreq, and high IRQ 16 CPU usage. Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out a better solution. Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546 Reported-by: Joey Corleone <joey.corleone@mail.ru> Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com> Reported-by: David Spencer <dspencer577@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+ Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-02-11Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Enable Cortex-A510 erratum 2051678 by default as we do with other errata. - arm64 IORT: Check the node revision for PMCG resources to cope with old firmware based on a broken revision of the spec that had no way to describe the second register page (when an implementation is using the recommended RELOC_CTRS feature). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Check node revision for PMCG resources arm64: Enable Cortex-A510 erratum 2051678 by default
2022-02-11Merge tag 'acpi-5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert two commits that turned out to be problematic and fix two issues related to wakeup from suspend-to-idle on x86. Specifics: - Revert a recent change that attempted to avoid issues with conflicting address ranges during PCI initialization, because it turned out to introduce a regression (Hans de Goede). - Revert a change that limited EC GPE wakeups from suspend-to-idle to systems based on Intel hardware, because it turned out that systems based on hardware from other vendors depended on that functionality too (Mario Limonciello). - Fix two issues related to the handling of wakeup interrupts and wakeup events signaled through the EC GPE during suspend-to-idle on x86 (Rafael Wysocki)" * tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems" PM: s2idle: ACPI: Fix wakeup interrupts handling ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
2022-02-11Merge tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request - nvme-tcp: fix bogus request completion when failing to send AER (Sagi Grimberg) - add the missing nvme_complete_req tracepoint for batched completion (Bean Huo) - Revert of the loop async autoclear issue that has continued to plague us this release. A few patchsets exists to improve this, but they are too invasive to be considered at this point (Tetsuo) * tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-block: loop: revert "make autoclear operation asynchronous" nvme-tcp: fix bogus request completion when failing to send AER nvme: add nvme_complete_req tracepoint for batched completion
2022-02-11Merge tag 'gpio-fixes-for-v5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - use sleeping variants of GPIO accessors where needed in gpio-aggregator - never return kernel's internal error codes to user-space in gpiolib core - use the correct register for reading output values in gpio-sifive - fix line hogging in gpio-sim * tag 'gpio-fixes-for-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix hogs with custom chip labels gpio: sifive: use the correct register to read output values gpiolib: Never return internal error codes to user space gpio: aggregator: Fix calling into sleeping GPIO controllers
2022-02-11Merge tag 'ata-5.17-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: "A couple of additional fixes for 5.17-rc4: - Fix compilation warnings in the sata_fsl driver (powerpc) (me) - Disable TRIM commands on M88V29 devices as these commands are failing despite the device reporting it supports TRIM (Zoltan)" * tag 'ata-5.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-core: Disable TRIM on M88V29 ata: sata_fsl: fix sscanf() and sysfs_emit() format strings
generated by cgit (git 2.34.1) at 2025-04-24 09:20:26 +0000