summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-28Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 HW spec and bits updates: 1) Aya exposes IP-in-IP capability in mlx5_core. 2) Maxim exposes lag tx port affinity capabilities. 3) Moshe adds VNIC_ENV internal rq counter bits. 4) ODP capabilities for DC transport Misc updates: 5) Saeed, two compiler warnings cleanups 6) Add XRQ legacy commands opcodes 7) Use refcount_t for refcount 8) fix a -Wstringop-truncation warning
2019-08-28net/mlx5: Set ODP capabilities for DC transport to maxMichael Guralnik
In mlx5_core initialization, query max ODP capabilities for DC transport from FW and set as current capabilities. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-27net: stmmac: setup higher frequency clk support for EHL & TGLVoon Weifeng
EHL DW EQOS is running on a 200MHz clock. Setting up stmmac-clk, ptp clock and ptp_max_adj to 200MHz. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: stmmac: add EHL RGMII 1Gbps PCI info and PCI IDVoon Weifeng
Added EHL RGMII 1Gbps PCI ID. Different MII and speed will have different PCI ID. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: stmmac: add TGL SGMII 1Gbps PCI info and PCI IDVoon Weifeng
Added TGL SGMII 1Gbps PCI ID. Different MII and speed will have different PCI ID. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: stmmac: add EHL SGMII 1Gbps PCI info and PCI IDVoon Weifeng
Added EHL SGMII 1Gbps PCI ID. Different MII and speed will have different PCI ID. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: fully support SERDES on Topaz familyMarek Behún
Currently we support SERDES on the Topaz family in a limited way: no IRQs and the cmode is not writable, thus the mode is determined by strapping pins. Marvell's examples though show how to make cmode writable on port 5 and support SGMII autonegotiation. It is done by writing hidden registers, for which we already have code. This patch adds support for making the cmode for the SERDES port writable on the Topaz family, via a new chip operation, .port_set_cmode_writable, which is called from mv88e6xxx_port_setup_mac just before .port_set_cmode. SERDES IRQs are also enabled for Topaz. Tested on Turris Mox. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: rename port cmode macroMarek Behún
This is a cosmetic update. We are removing the last underscore from macros MV88E6XXX_PORT_STS_CMODE_100BASE_X and MV88E6XXX_PORT_STS_CMODE_1000BASE_X. The 2500base-x version does not have that underscore. Also PHY_INTERFACE_MODE_ macros do not have it there. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: simplify SERDES code for Topaz and PeridotMarek Behún
By adding an additional serdes_get_lane implementation (for Topaz), we can merge the implementations of other SERDES functions (powering and IRQs). We can skip checking port numbers, since the serdes_get_lane() methods inform if there is no lane on a port or if the lane cannot be used for given cmode. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: create serdes_get_lane chip operationMarek Behún
Create a serdes_get_lane() method in the mv88e6xxx operations structure. Use it instead of calling the different implementations. Also change the methods so that their return value is used only for error. The lane number is put into a place referred to by a pointer given as argument. If the port does not have a lane, return -ENODEV. Lanes are phy addresses, so use u8 as their type. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: update code operating on hidden registersMarek Behún
This patch moves the functions operating on the hidden debug registers into it's own file, port_hidden.c. The functions prefix is renamed from mv88e6390_hidden_ to mv88e6xxx_port_hidden_, to be consistent with the rest of this driver. The macros are prefixed with MV88E6XXX_ prefix, and are changed not to use the BIT() macro nor bit shifts, since the rest of the port.h file does not use it. We also add the support for setting the Block Address field when operating hidden registers. Marvell's mdio examples for SERDES settings on Topaz use Block Address 0x7 when reading/writing hidden registers, and although the specification says that block must be set to 0xf, those settings are reachable only with Block Address 0x7. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handlerMarek Behún
The mv88e6390_serdes_irq_link_sgmii IRQ handler reads the SERDES PHY status register to determine speed, among other things. If cmode of the port is set to 2500base-x, though, the PHY still reports 1000 Mbps (the PHY register itself does not differentiate between 1000 Mbps and 2500 Mbps - it thinks it is running at 1000 Mbps, although clock is 2.5x faster). Look at the cmode and set SPEED_2500 if cmode is set to 2500base-x. Also tell mv88e6xxx_port_setup_mac the PHY interface mode corresponding to current cmode in terms of phy_interface_t. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: mediatek: remove set but not used variable 'status'Mao Wenan
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function mtk_handle_irq: drivers/net/ethernet/mediatek/mtk_eth_soc.c:1951:6: warning: variable status set but not used [-Wunused-but-set-variable] Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support") Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: sja1105: Clear VLAN filtering offload netdev featureVladimir Oltean
The switch barely supports traffic I/O, and it does that by repurposing VLANs when there is no bridge that is taking control of them. Letting DSA declare this netdev feature as supported (see dsa_slave_create) would mean that VLAN sub-interfaces created on sja1105 switch ports will be hardware offloaded. That means that net/8021q/vlan_core.c would install the VLAN into the filter tables of the switch, potentially interfering with the tag_8021q VLANs. We need to prevent that from happening and not let the 8021q core offload VLANs to the switch hardware tables. In vlan_filtering=0 modes of operation, the switch ports can pass through VLAN-tagged frames with no problem. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: ethernet: mediatek: Re-add support SGMIIRené van Dorst
* Re-add SGMII support but now with PHYLINK API support So the SGMII changes are more clear * Move SGMII block setup from mtk_gmac_sgmii_path_setup() to mtk_mac_config() * Merge mtk_setup_hw_path() into mtk_mac_config() * Remove mediatek,physpeed property, fixed-link supports now any speed so speed = <2500>; is now valid with PHYLINK * Demagic SGMII register values * Use phylink state to setup fixed-link mode Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: ethernet: mediatek: Add basic PHYLINK supportRené van Dorst
This convert the basics to PHYLINK API. SGMII support is not in this patch. Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net/mlx5: fix a -Wstringop-truncation warningQian Cai
In file included from ./arch/powerpc/include/asm/paca.h:15, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./include/asm-generic/preempt.h:5, from ./arch/powerpc/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from ./include/linux/wait.h:9, from ./include/linux/completion.h:12, from ./include/linux/mlx5/driver.h:37, from drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h:6, from drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:33: In function 'strncpy', inlined from 'mlx5_fw_tracer_save_trace' at drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:549:2, inlined from 'mlx5_tracer_print_trace' at drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:574:2: ./include/linux/string.h:305:9: warning: '__builtin_strncpy' output may be truncated copying 256 bytes from a string of length 511 [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it by using the new strscpy_pad() since the commit 458a3bf82df4 ("lib/string: Add strscpy_pad() function") which will always NUL-terminate the string, and avoid possibly leak data through the ring buffer where non-admin account might enable these events through perf. Fixes: fd1483fe1f9f ("net/mlx5: Add support for FW reporter dump") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Merge tag 'mfd-fixes-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: "Identify potentially unused functions in rk808 driver when !PM" * tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rk808: Make PM function declaration static mfd: rk808: Mark pm functions __maybe_unused
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya Leoshkevich. 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for SMC from Jason Baron. 3) ipv6_mc_may_pull() should return 0 for malformed packets, not -EINVAL. From Stefano Brivio. 4) Don't forget to unpin umem xdp pages in error path of xdp_umem_reg(). From Ivan Khoronzhuk. 5) Fix sta object leak in mac80211, from Johannes Berg. 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2 switches. From Florian Fainelli. 7) Revert DMA sync removal from r8169 which was causing regressions on some MIPS Loongson platforms. From Heiner Kallweit. 8) Use after free in flow dissector, from Jakub Sitnicki. 9) Fix NULL derefs of net devices during ICMP processing across collect_md tunnels, from Hangbin Liu. 10) proto_register() memory leaks, from Zhang Lin. 11) Set NLM_F_MULTI flag in multipart netlink messages consistently, from John Fastabend. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) r8152: Set memory to all 0xFFs on failed reg reads openvswitch: Fix conntrack cache with timeout ipv4: mpls: fix mpls_xmit for iptunnel nexthop: Fix nexthop_num_path for blackhole nexthops net: rds: add service level support in rds-info net: route dump netlink NLM_F_MULTI flag missing s390/qeth: reject oversized SNMP requests sock: fix potential memory leak in proto_register() MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode ipv4/icmp: fix rt dst dev null pointer dereference openvswitch: Fix log message in ovs conntrack bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0 bpf: fix use after free in prog symbol exposure bpf: fix precision tracking in presence of bpf2bpf calls flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH Revert "r8169: remove not needed call to dma_sync_single_for_device" ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev net/ncsi: Fix the payload copying for the request coming from Netlink qed: Add cleanup in qed_slowpath_start() ...
2019-08-27mfd: rk808: Make PM function declaration staticLee Jones
Avoids: ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \ was not declared. Should it be static? Fixes: 5752bc4373b2 ("mfd: rk808: Mark pm functions __maybe_unused") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-27mfd: rk808: Mark pm functions __maybe_unusedArnd Bergmann
The newly added suspend/resume functions are only used if CONFIG_PM is enabled: drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function] drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them when they are not needed. Fixes: 586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-26nfp: add AMDA0058 boards to firmware listJakub Kicinski
Add MODULE_FIRMWARE entries for AMDA0058 boards. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-26r8169: improve DMA handling in rtl_rxHeiner Kallweit
Move the call to dma_sync_single_for_cpu after calling napi_alloc_skb. This avoids calling dma_sync_single_for_cpu w/o handing control back to device if the memory allocation should fail. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-26net: sched: add API for registering unlocked offload block callbacksVlad Buslov
Extend struct flow_block_offload with "unlocked_driver_cb" flag to allow registering and unregistering block hardware offload callbacks that do not require caller to hold rtnl lock. Extend tcf_block with additional lockeddevcnt counter that is incremented for each non-unlocked driver callback attached to device. This counter is necessary to conditionally obtain rtnl lock before calling hardware callbacks in following patches. Register mlx5 tc block offload callbacks as "unlocked". Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25r8152: Set memory to all 0xFFs on failed reg readsPrashant Malani
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by: Prashant Malani <pmalani@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25cirrus: cs89x0: remove set but not used variable 'lp'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cirrus/cs89x0.c: In function 'cs89x0_platform_probe': drivers/net/ethernet/cirrus/cs89x0.c:1847:20: warning: variable 'lp' set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 6751edeb8700 ("cirrus: cs89x0: Use managed interfaces") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25Revert "net: mediatek: remove set but not used variable 'status'"David S. Miller
This reverts commit ee641b0cdb9486f8212a3da153a46ab3551a97e5. Actually it is not clear whether this register read is not needed for it's HW side effects or not. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25net: mediatek: remove set but not used variable 'status'Mao Wenan
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function mtk_handle_irq: drivers/net/ethernet/mediatek/mtk_eth_soc.c:1951:6: warning: variable status set but not used [-Wunused-but-set-variable] Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25Merge tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay cleanup from Miguel Ojeda: "Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)" * tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux: auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant
2019-08-24Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Two fixes for regressions in this merge window: - select the Kconfig symbols for the noncoherent dma arch helpers on arm if swiotlb is selected, not just for LPAE to not break then Xen build, that uses swiotlb indirectly through swiotlb-xen - fix the page allocator fallback in dma_alloc_contiguous if the CMA allocation fails" * tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix zone selection after an unaddressable CMA allocation arm: select the dma-noncoherent symbols for all swiotlb builds
2019-08-24net: phy: sfp: Add labels to hwmon sensorsAndrew Lunn
SFPs can report two different power values, the transmit power and the receive power. Add labels to make it clear which is which. Also add labels to the other sensors, VCC power supply, bias and module temperature. sensors(1) now shows: sff2-isa-0000 Adapter: ISA adapter VCC: +3.23 V temperature: +33.4 C TX_power: 276.00 uW RX_power: 20.00 uW bias: +0.01 A Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-08-23 This series contains updates to ice driver only. Dave adds logic for the necessary bits to be set in the VSI context for the PF_VSI and the TX_descriptors for control packets egressing the PF_VSI. Updated the logic to detect both DCBx and LLDP states in the firmware engine to account for situations where DCBx is enabled and LLDP is disabled. Fixed the driver to treat the DCBx state of "NOT_STARTED" as a valid state and should not assume "is_fw_lldp" true automatically. Since "enable-fw-lldp" flag was confusing and cumbersome, change the flag to "fw-lldp-agent" with a value of on or off to help clarify whether the LLDP agent is running or not. Brett fixes an issue where synchronize_irq() was being called from the host of VF's, which should not be done. Michal fixed an issue when rebuilding the DCBx configuration while in IEEE mode versus CEE mode, so add a check before copying the configuration value to ensure we are only in CEE mode. Jake fixes the PF to reject any VF request to setup head writeback since the support has been deprecated. Mitch adds an additional check to ensure the VF is active before sending out an error message that a message was unable to be sent to a particular VF. Chinh updates the driver to use "topology" mode when checking the PHY for status, since this mode provides us the current module type that is available. Fixes the driver from clearing the auto_fec_enable bit which was blocking a user from forcing non-spec compliant FEC configurations. Amruth does a refactor on the code to first check, then assign in the virtual channel space. Bruce updates the driver to actually update the stats when a user runs the ethtool command 'ethtool -S <iface>' instead of providing a snapshot of the stats that maybe from a second ago. Akeem fixes up the adding/removing of VSI MAC filters for VFs, so that VFs cannot add/remove a filter from another VSI. We now track the number of filters added right from when the VF resources get allocated and won't get into MAC filter mis-match issue in the switch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: add xmit_more support for IQD devicesJulian Wiedmann
IQD devices offer limited support for bulking: all frames in a TX buffer need to have the same target. qeth_iqd_may_bulk() implements this constraint, and allows us to defer the TX doorbell until (a) the buffer is full (since each buffer needs its own doorbell), or (b) the entire TX queue is full, or (b) we reached the BQL limit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: add BQL support for IQD devicesJulian Wiedmann
Each TX buffer may contain multiple skbs. So just accumulate the sent byte count in the buffer struct, and later use the same count when completing the buffer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: when in TX NAPI mode, use napi_consume_skb()Julian Wiedmann
This allows the stack to bulk-free our TX-completed skbs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: add TX NAPI support for IQD devicesJulian Wiedmann
Due to their large MTU and potentially low utilization of TX buffers, IQD devices in particular require fast TX recycling. This makes them a prime candidate for a TX NAPI path in qeth. qeth_tx_poll() uses the recently introduced qdio_inspect_queue() helper to poll the TX queue for completed buffers. To avoid hogging the CPU for too long, we yield to the stack after completing an entire queue's worth of buffers. While IQD is expected to transfer its buffers synchronously (and thus doesn't support TX interrupts), a timer covers for the odd case where a TX buffer doesn't complete synchronously. Currently this timer should only ever fire for (1) the mcast queue, (2) the occasional race, where the NAPI poll code observes an update to queue->used_buffers while the TX doorbell hasn't been issued yet. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: collect accurate TX statisticsJulian Wiedmann
This consolidates the SW statistics code, and improves it to (1) account for the header overhead of each segment on a TSO skb, (2) count dangling packets as in-error (during eg. shutdown), and (3) only count offloads when the skb was successfully transmitted. We also count each segment of an TSO skb as one packet - except for tx_dropped, to be consistent with dev->tx_dropped. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qdio: let drivers opt-out from Output Queue scanningJulian Wiedmann
If a driver wants to use the new Output Queue poll code, then the qdio layer must disable its internal Queue scanning. Let the driver select this mode by passing a special scan_threshold of 0. As the scan_threshold is the same for all Output Queues, also move it into the main qdio_irq struct. This allows for fast opt-out checking, a driver is expected to operate either _all_ or none of its Output Queues in polling mode. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qdio: enable drivers to poll for Output completionsJulian Wiedmann
While commit d36deae75011 ("qdio: extend API to allow polling") enhanced the qdio layer so that drivers can poll their Input Queues, we don't have the corresponding infrastructure for Output Queues yet. Factor out a helper that scans a single QDIO Queue, so that qeth can implement TX NAPI on top of it. While doing so, remove the duplicated tracking of the next-to-scan index (q->first_to_check vs q->first_to_kick) in this code path. qdio_handle_aobs() needs to move slightly upwards in the code hierarchy, so that it's still called from the polling path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24bnxt_en: Fix allocation of zero statistics block size regression.Michael Chan
Recent commit added logic to determine the appropriate statistics block size to allocate and the size is stored in bp->hw_ring_stats_size. But if the firmware spec is older than 1.6.0, it is 0 and not initialized. This causes the allocation to fail with size 0 and bnxt_open() to abort. Fix it by always initializing bp->hw_ring_stats_size to the legacy default size value. Fixes: 4e7485066373 ("bnxt_en: Allocate the larger per-ring statistics block for 57500 chips.") Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24s390/qeth: reject oversized SNMP requestsJulian Wiedmann
Commit d4c08afafa04 ("s390/qeth: streamline SNMP cmd code") removed the bounds checking for req_len, under the assumption that the check in qeth_alloc_cmd() would suffice. But that code path isn't sufficiently robust to handle a user-provided data_length, which could overflow (when adding the cmd header overhead) before being checked against QETH_BUFSIZE. We end up allocating just a tiny iob, and the subsequent copy_from_user() writes past the end of that iob. Special-case this path and add a coarse bounds check, to protect against maliciuous requests. This let's the subsequent code flow do its normal job and precise checking, without risk of overflow. Fixes: d4c08afafa04 ("s390/qeth: streamline SNMP cmd code") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24Merge tag 'mlx5-fixes-2019-08-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-22 This series introduces some fixes to mlx5 driver. 1) Form Moshe, two fixes for firmware health reporter 2) From Eran, two ktls fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24net: hns3: Fix -Wunused-const-variable warningYueHaibing
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h:542:30: warning: meta_data_key_info defined but not used [-Wunused-const-variable=] drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h:553:30: warning: tuple_key_info defined but not used [-Wunused-const-variable=] The two variable is only used in hclge_main.c, so just move the definition over there. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24Merge tag 'gpio-v5.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a (hopefully last) set of GPIO fixes for the v5.3 kernel cycle. Two are pretty core: - Fix not reporting open drain/source lines to userspace as "input" - Fix a minor build error found in randconfigs - Fix a chip select quirk on the Freescale SPI - Fix the irqchip initialization semantic order to reflect what it was using the old API" * tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix irqchip initialization order gpio: of: fix Freescale SPI CS quirk handling gpio: Fix build error of function redefinition gpiolib: never report open-drain/source lines as 'input' to user-space
2019-08-24Merge branch 'ieee802154-for-davem-2019-08-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2019-08-24 An update from ieee802154 for your *net* tree. Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for ieee802154 and Colin Ian King cleaned up a redundant variable assignment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Sasha Levin: - Fix for panics and network failures on PAE guests by Dexuan Cui. - Fix of a memory leak (and related cleanups) in the hyper-v keyboard driver by Dexuan Cui. - Code cleanups for hyper-v clocksource driver during the merge window by Dexuan Cui. - Fix for a false positive warning in the userspace hyper-v KVP store by Vitaly Kuznetsov. * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAE Tools: hv: kvp: eliminate 'may be used uninitialized' warning Input: hyperv-keyboard: Use in-place iterator API in the channel callback Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_context
2019-08-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, three for edge conditions which don't occur very often. The lpfc fix mitigates memory exhaustion for some high CPU systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm() scsi: target: tcmu: avoid use-after-free after command timeout scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure
2019-08-24Merge tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm fixes from Dave Airlie: "Although the tree built for me fine on arm here, it appears either header cleanups in next or some kconfig combo it breaks, so this contains a fix to mediatek to include dma-mapping.h explicitly. There was also one nouveau fix that came in late that I was going to leave until next week, but since I was sending this I thought it may as well be in here: mediatek: - fix build in some cases nouveau: - fix hang with i2c and mst docks" * tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm: drm/mediatek: include dma-mapping header drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX
2019-08-24drm/mediatek: include dma-mapping headerDave Airlie
Although it builds fine here in my arm cross compile, it seems either via some other patches in -next or some Kconfig combination, this fails to build for everyone. Include linux/dma-mapping.h should fix it. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-04-28 10:53:54 +0000