summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-11-04drm/msm/gem: Move locking in shrinker pathRob Clark
Move grabbing the bo lock into shrinker, with a msm_gem_trylock() to skip over bo's that are already locked. This gets rid of the nested lock classes. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Add some _locked() helpersRob Clark
When we cut-over to using dma_resv_lock/etc instead of msm_obj->lock, we'll need these for the submit path (where resv->lock is already held). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Move prototypes to msm_gem.hRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Rename internal get_iova_locked helperRob Clark
We'll need to introduce a _locked() version of msm_gem_get_iova(), so we need to make that name available. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Add obj->lock wrappersRob Clark
This will make it easier to transition over to obj->resv locking for everything that is per-bo locking. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Fix a couple incorrect usages of get_vaddr_active()Rob Clark
The microcode bo's should never be madvise(WONTNEED), so these should not be using msm_gem_get_vaddr_active(). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi: do not try reading 28nm vco rate if it's not enabledDmitry Baryshkov
Reading VCO rate for this PLL can cause boot stalls, if it is not enabled. Guard clk_hw_get_rate with a call to dsi_pll_28nm_clk_is_enabled(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Fix duplicate gpu node in icc summaryAkhil P Oommen
The dev_pm_opp_of_add_table() api initializes the icc nodes for gpu indirectly. So we can avoid using of_icc_get() api in the common probe path. To improve this, move of_icc_get() to target specific code where it is required. This patch helps to fix duplicate gpu node listed in the interconnect summary from the debugfs. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: fix clock scaling on non-sc7180 boardDmitry Baryshkov
c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") has added support for handling bandwidth voting in kms path in addition to old mdss path. However this broke all other platforms since _dpu_core_perf_crtc_update_bus() will now error out instead of properly calculating bandwidth and core clocks. Fix _dpu_core_perf_crtc_update_bus() to just skip bandwidth setting instead of returning an error in case kms->num_paths == 0 (MDSS is used for bandwidth management). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: enable merge_3d support on sm8150/sm8250Dmitry Baryshkov
Handle new merge_3d block setup in dpu encoder code. Pass correct mode and id. Note, that merge_3d blocks are not handled via usual RM reservation mechanism, as each merge_3d block is tied to two PPs, so by reserving PP you get merge_3d automatically. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: setup merge modes in merge_3d blockDmitry Baryshkov
Handle setting up merge mode in merge_3d hardware block. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: handle merge_3d configuration in hw_ctl blockDmitry Baryshkov
Active HW CTL blocks need separate handling for merge_3d flushes. Implement necessary merge_3d configuration and flushing. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: initial support for merge3D hardware blockDmitry Baryshkov
Add initial support for merge3D hardware block on SM8[12]50. Merge3D is reposible for merging contents of two LMs (two PPs) into single interface. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: simplify interface flush handlingDmitry Baryshkov
Instead of calling 4 callbacks to set pending masks, call just one to update both pending_flush_mask and pending_intf_flush mask. Note, that CMD mode support incorrectly did not update pending_intf_flush mask, breaking CMD support on SC7180/SM8x50. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Implement shutdown callback for adrenoAkhil P Oommen
Implement the shutdown callback for adreno gpu platform device to safely shutdown it before a system reboot. This helps to avoid futher transactions from gpu after the smmu is moved to bypass mode. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dp: add opp_table corner voting support base on dp_ink_clk rateKuogee Hsieh
Set link rate by using OPP set rate api so that CX level will be set accordingly based on the link rate. Changes in v2: -- remove dev from dp_ctrl_put() parameters -- Add more information to commit message Changes in v3: -- return when dev_pm_opp_set_clkname() failed Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Remove redundant null checkTian Tao
clk_prepare_enable() and clk_disable_unprepare() will check NULL clock parameter, so It is not necessary to add additional checks. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_phy_10nm: implement PHY disablingDmitry Baryshkov
Implement phy_disable() callback to disable DSI PHY lanes and blocks when phy is not used. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: ff73ff194060 ("drm/msm/dsi: Populate the 10nm PHY funcs") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_phy_7nm: implement PHY disablingDmitry Baryshkov
Implement phy_disable() callback to disable DSI PHY lanes and blocks when phy is not used. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_pll_10nm: restore VCO rate during restore_stateDmitry Baryshkov
PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_pll_7nm: restore VCO rate during restore_stateDmitry Baryshkov
PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: Add newline to printksStephen Boyd
Printk messages need newlines. Add it here. Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dp: DisplayPort PHY compliance tests fixupTanmay Shah
Bandwidth code was being used as test link rate. Fix this by converting bandwidth code to test link rate Do not reset voltage and pre-emphasis level during IRQ HPD attention interrupt. Also fix pre-emphasis parsing during test link status process Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Add missing struct identifierTian Tao
fix warnings reported by make W=1 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:195: warning: cannot understand function prototype: 'const struct dpu_intr_reg dpu_intr_set[] = ' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:252: warning: cannot understand function prototype: 'const struct dpu_irq_type dpu_irq_map[] = ' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm: Add missing stub definitionRobin Murphy
DRM_MSM fails to build with DRM_MSM_DP=n; add the missing stub. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm: Unconditionally call dev_pm_opp_of_remove_table()Viresh Kumar
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. While at it, also create a label to put clkname. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/atomic: Convert to per-CRTC kthread_workRob Clark
Use a SCHED_FIFO kthread_worker for async atomic commits. We have a hard deadline if we don't want to miss a frame. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/kms: Update msm_kms_init/destroyRob Clark
Add msm_kms_destroy() and add err return from msm_kms_init(). Prep work for next patch. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/gpu: Convert retire/recover work to kthread_workerRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/atomic: Drop per-CRTC locks in reverse orderRob Clark
lockdep dislikes seeing locks unwound in a non-nested fashion. Fixes: b3d91800d9ac ("drm/msm: Fix race condition in msm driver with async layer updates") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
2020-11-01drm/msm: Fix race condition in msm driver with async layer updatesKrishna Manikandan
When there are back to back commits with async cursor update, there is a case where second commit can program the DPU hw blocks while first didn't complete flushing config to HW. Synchronize the compositions such that second commit waits until first commit flushes the composition. This change also introduces per crtc commit lock, such that commits on different crtcs are not blocked by each other. Changes in v2: - Use an array of mutexes in kms to handle commit lock per crtc. (Rob Clark) Changes in v3: - Add wrapper functions to handle lock and unlock of commit_lock for each crtc. (Rob Clark) Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25Merge tag 'ntb-5.10' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
2020-10-25Merge branch 'i2c/for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-25Merge tag '20201024-v4-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom Pull random32 updates from Willy Tarreau: "Make prandom_u32() less predictable. This is the cleanup of the latest series of prandom_u32 experimentations consisting in using SipHash instead of Tausworthe to produce the randoms used by the network stack. The changes to the files were kept minimal, and the controversial commit that used to take noise from the fast_pool (f227e3ec3b5c) was reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is fed from various sources of activities (networking, scheduling) to perturb the SipHash state using fast, non-trivially predictable data, instead of keeping it fully deterministic. The goal is essentially to make any occasional memory leakage or brute-force attempt useless. The resulting code was verified to be very slightly faster on x86_64 than what is was with the controversial commit above, though this remains barely above measurement noise. It was also tested on i386 and arm, and build- tested only on arm64" Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ * tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom: random32: add a selftest for the prandom32 code random32: add noise from network and scheduling activity random32: make prandom_u32() output unpredictable
2020-10-25i2c: core: Restore acpi_walk_dep_device_list() getting called after ↵Hans de Goede
registering the ACPI i2c devs Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-24Merge tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "Two minor libata fixes: - Fix a DMA boundary mask regression for sata_rcar (Geert) - kerneldoc markup fix (Mauro)" * tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block: ata: fix some kernel-doc markups ata: sata_rcar: Fix DMA boundary mask
2020-10-24random32: make prandom_u32() output unpredictableGeorge Spelvin
Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-23Merge tag 'acpi-5.10-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These include an ACPICA code build fix related to recent GPE register access changes, a Kconfig cleanup related to the Dynamic Platform and Thremal Framework (DPTF) support, a reboot issue workaround, a debug module fix and a couple of janitorial changes. Specifics: - Fix ACPICA code build after recent changes related to accessing GPE registers (Rafael Wysocki). - Clean up DPTF part of the ACPI Kconfig (Rafael Wysocki). - Work around a reboot issue related to RESET_REG (Zhang Rui). - Prevent ACPI debug module from attemtping to run (and crashing) when ACPI is disabled (Jamie Iles). - Drop confusing comment from the ACPI processor driver (Alex Hung). - Drop a few unreachable break statements (Tom Rix)" * tag 'acpi-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: utils: remove unreachable breaks ACPICA: Add missing type casts in GPE register access code ACPI: DPTF: Add ACPI_DPTF Kconfig menu ACPI: DPTF: Fix participant driver names ACPI: processor: remove comment regarding string _UID support ACPI: reboot: Avoid racing after writing to ACPI RESET_REG ACPI: debug: don't allow debugging when ACPI is disabled
2020-10-23Merge tag 'pm-5.10-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "First of all, the adaptive voltage scaling (AVS) drivers go to new platform-specific locations as planned (this part was reported to have merge conflicts against the new arm-soc updates in linux-next). In addition to that, there are some fixes (intel_idle, intel_pstate, RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state accounting support to the generic power domains (genpd) code and some janitorial changes all over. Specifics: - Move the AVS drivers to new platform-specific locations and get rid of the drivers/power/avs directory (Ulf Hansson). - Add on/off notifiers and idle state accounting support to the generic power domains (genpd) framework (Ulf Hansson, Lina Iyer). - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson). - Make intel_idle disregard ACPI _CST if it cannot use the data returned by that method (Mel Gorman). - Modify intel_pstate to avoid leaving useless sysfs directory structure behind if it cannot be registered (Chen Yu). - Fix domain detection in the RAPL power capping driver and prevent it from failing to enumerate the Psys RAPL domain (Zhang Rui). - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and later AMD chips (Wei Huang). - Update the driver assumptions comment in intel_idle and fix a kerneldoc comment in the runtime PM framework (Alexander Monakov, Bean Huo). - Avoid unnecessary resets of the cached frequency in the schedutil cpufreq governor to reduce overhead (Wei Wang). - Clean up the cpufreq core a bit (Viresh Kumar). - Make assorted minor janitorial changes (Daniel Lezcano, Geert Uytterhoeven, Hubert Jasudowicz, Tom Rix). - Clean up and optimize the cpupower utility somewhat (Colin Ian King, Martin Kaistra)" * tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM: sleep: remove unreachable break PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: runtime: Fix typo in pm_runtime_set_active() helper comment PM: domains: Fix build error for genpd notifiers powercap: Fix typo in Kconfig "Plance" -> "Plane" cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers PM: domains: enable domain idle state accounting PM: domains: Add curly braces to delimit comment + statement block PM: domains: Add support for PM domain on/off notifiers for genpd powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver ...
2020-10-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "The set of core changes here is Christoph's submission path cleanups. These introduced a couple of regressions when first proposed so they got held over from the initial merge window pull request to give more testing time, which they've now had and Syzbot has confirmed the regression it detected is fixed. The other main changes are two driver updates (arcmsr, pm80xx) and assorted minor clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: qla2xxx: Fix return of uninitialized value in rval scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands scsi: sr: Initialize ->cmd_len scsi: arcmsr: Update driver version to v1.50.00.02-20200819 scsi: arcmsr: Add support for ARC-1886 series RAID controllers scsi: arcmsr: Fix device hot-plug monitoring timer stop scsi: arcmsr: Remove unnecessary syntax scsi: pm80xx: Driver version update scsi: pm80xx: Increase the number of outstanding I/O supported to 1024 scsi: pm80xx: Remove DMA memory allocation for ccb and device structures scsi: pm80xx: Increase number of supported queues scsi: sym53c8xx_2: Fix sizeof() mismatch scsi: isci: Fix a typo in a comment scsi: qla4xxx: Fix inconsistent format argument type scsi: myrb: Fix inconsistent format argument types scsi: myrb: Remove redundant assignment to variable timeout scsi: bfa: Fix error return in bfad_pci_init() scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup() scsi: snic: Simplify the return expression of svnic_cq_alloc() scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc() ...
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
generated by cgit (git 2.34.1) at 2025-04-17 11:19:16 +0000