summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-26Merge 5.8-rc2 into usb-linusGreg Kroah-Hartman
Felipe has based his patches on that tag, so update my usb-linus branch to it as well so that I can pull his patches in here easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: renesas_usbhs: getting residue from callback_resultYoshihiro Shimoda
This driver assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. The usb-dmac driver will support the callback_result, so this driver can use it to get residue correctly. Note that even if the usb-dmac driver has not supported the callback_result yet, this patch doesn't cause any side-effects. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang <hien.dang.eb@renesas.com> Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1592482277-19563-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"Anand Moon
This reverts commit 07f6842341abe978e6375078f84506ec3280ece5. Since SCLK_SCLK_USBD300 suspend clock need to be configured for phy module, I wrongly mapped this clock to DWC3 code. Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Cc: stable <stable@vger.kernel.org> Fixes: 07f6842341ab ("usb: dwc3: exynos: Add support for Exynos5422 suspend clk") Link: https://lore.kernel.org/r/20200623074637.756-1-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24xhci: Poll for U0 after disabling USB2 LPMKai-Heng Feng
USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24xhci: Return if xHCI doesn't support LPMKai-Heng Feng
Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: host: xhci-mtk: avoid runtime suspend when removing hcdMacpaul Lin
When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24xhci: Fix enumeration issue when setting max packet size for FS devices.Al Cooper
Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24xhci: Fix incorrect EP_STATE_MASKMathias Nyman
EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: cdns3: ep0: add spinlock for cdns3_check_new_setupPeter Chen
The other thread may access other endpoints when the cdns3_check_new_setup is handling, add spinlock to protect it. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200623030918.8409-4-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: cdns3: trace: using correct dir valuePeter Chen
It should use the correct direction value from register, not depends on previous software setting. It fixed the EP number wrong issue at trace when the TRBERR interrupt occurs for EP0IN. When the EP0IN IOC has finished, software prepares the setup packet request, the expected direction is OUT, but at that time, the TRBERR for EP0IN may occur since it is DMULT mode, the DMA does not stop until TRBERR has met. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200623030918.8409-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: cdns3: ep0: fix the test mode set incorrectlyPeter Chen
The 'tmode' is ctrl->wIndex, changing it as the real test mode value for register assignment. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200623030918.8409-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-21Merge tag 'pinctrl-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-21Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error
2020-06-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error
2020-06-20Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 'libnvdimm-for-5.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource ↵Haibo Chen
leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 's390-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-19Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Just i915 and amd here. i915 has some workaround movement so they get applied at the right times, and a timeslicing fix, along with some display fixes. AMD has a few display floating point fix and a devcgroup fix for amdkfd. i915: - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix" * tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amdgpu: fix documentation around busy_percentage drm/amdgpu/pm: update comment to clarify Overdrive interfaces drm/amdkfd: Use correct major in devcgroup check drm/i915/display: Fix the encoder type check drm/i915/icl+: Fix hotplug interrupt disabling after storm detection drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on drm/i915/gt: Incrementally check for rewinding drm/i915/tc: fix the reset of ln0 drm/i915/gt: Prevent timeslicing into unpreemptable requests drm/i915/selftests: Restore to default heartbeat drm/i915: work around false-positive maybe-uninitialized warning drm/i915/pmu: avoid an maybe-uninitialized warning drm/i915/gt: Incorporate the virtual engine into timeslicing drm/amd/display: Rework dsc to isolate FPU operations ...
2020-06-19Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "An important follow-up for replica reads support that went into -rc1 and two target_copy() fixups" * tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client: libceph: don't omit used_replica in target_copy() libceph: don't omit recovery_deletes in target_copy() libceph: move away from global osd_req_flags
2020-06-19i2c: smbus: Fix spelling mistake in the commentsKeyur Patel
Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19i2c: remove deprecated i2c_new_device APIWolfram Sang
All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19video: backlight: tosa_lcd: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: use new I2C APIWolfram Sang
i2c_new_client() is deprecated, use the replacement i2c_new_client_device(). Also, we have a helper to check if a driver is bound. Use it to simplify the code. Note that this changes the errno for a failed device creation from ENOMEM to ENODEV. No callers currently interpret this errno, though, so we use this condensed error check. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: fix refcouting error for modulesWolfram Sang
module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19Merge tag 'amd-drm-fixes-5.8-2020-06-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-17: amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617220733.3773183-1-alexander.deucher@amd.com
2020-06-18Merge branch 'hch' (maccess patches from Christoph Hellwig)Linus Torvalds
Merge non-faulting memory access cleanups from Christoph Hellwig: "Andrew and I decided to drop the patches implementing your suggested rename of the probe_kernel_* and probe_user_* helpers from -mm as there were way to many conflicts. After -rc1 might be a good time for this as all the conflicts are resolved now" This also adds a type safety checking patch on top of the renaming series to make the subtle behavioral difference between 'get_user()' and 'get_kernel_nofault()' less potentially dangerous and surprising. * emailed patches from Christoph Hellwig <hch@lst.de>: maccess: make get_kernel_nofault() check for minimal type compatibility maccess: rename probe_kernel_address to get_kernel_nofault maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
2020-06-18loop: replace kill_bdev with invalidate_bdevZheng Bin
When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18libata: Use per port sync for detachKai-Heng Feng
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangsLi Jun
John reported screaming irq caused by rt1711h when system boot[1], this is because irq request is done before tcpci_register_port(), so the chip->tcpci has not been setup, irq handler is entered but can't do anything, this patch is to address this by moving the irq request after tcpci_register_port(). [1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Cc: stable <stable@vger.kernel.org> # v4.18+ Cc: John Stultz <john.stultz@linaro.org> Reported-and-tested-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18USB: ohci-sm501: Add missed iounmap() in removeChuhong Yuan
This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6ebcec ("usb: ohci-sm501 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chipJoakim Tjernlund
USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18USB: ehci: reopen solution for Synopsys HC bugLongfang Liu
A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by: Longfang Liu <liulongfang@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnectZqiang
BUG: memory leak unreferenced object 0xffff888055046e00 (size 256): comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s) hex dump (first 32 bytes): 00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z..... f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7....... backtrace: [<00000000d121dccf>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline] [<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline] [<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811 [<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline] [<000000005c3c3381>] usbtest_probe+0x286/0x19d0 drivers/usb/misc/usbtest.c:2790 [<000000001cec6910>] usb_probe_interface+0x2bd/0x870 drivers/usb/core/driver.c:361 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 [<000000003ef66004>] __device_attach_driver+0x1b6/0x240 drivers/base/dd.c:831 [<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431 [<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897 [<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944 [<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491 [<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504 [<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0 drivers/usb/core/message.c:2030 [<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210 [<0000000098ade0f1>] usb_probe_device+0x90/0xd0 drivers/usb/core/driver.c:266 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 Acked-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Kyungtae Kim <kt0755@gmail.com> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: dwc2: Postponed gadget registration to the udc class driverMinas Harutyunyan
During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: add USB_QUIRK_DELAY_INIT for Logitech C922Tomasz Meresiński
The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by: Tomasz Meresiński <tomasz@meresinski.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: host: ehci-exynos: Fix error check in exynos_ehci_probe()Tang Bin
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: typec: mux: intel_pmc_mux: Fix DP alternate mode entryHeikki Krogerus
The PMC needs to be notified separately about HPD (hotplug detected) signal being high after mode entry. There is a bit "HPD High" in the Alternate Mode Request that the driver already sets, but that bit is only valid when the DisplayPort Alternate Mode is directly entered from disconnected state. Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Tested-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20200529131753.15587-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17drm/amdgpu: fix documentation around busy_percentageAlex Deucher
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdgpu/pm: update comment to clarify Overdrive interfacesAlex Deucher
Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdkfd: Use correct major in devcgroup checkLorenz Brun
The existing code used the major version number of the DRM driver instead of the device major number of the DRM subsystem for validating access for a devices cgroup. This meant that accesses allowed by the devices cgroup weren't permitted and certain accesses denied by the devices cgroup were permitted (if they matched the wrong major device number). Signed-off-by: Lorenz Brun <lorenz@brun.one> Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup") Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-17nvdimm/region: always show the 'align' attributeVishal Verma
It is possible that a platform that is capable of 'namespace labels' comes up without the labels properly initialized. In this case, the region's 'align' attribute is hidden. Howerver, once the user does initialize he labels, the 'align' attribute still stays hidden, which is unexpected. The sysfs_update_group() API is meant to address this, and could be called during region probe, but it has entanglements with the device 'lockdep_mutex'. Therefore, simply make the 'align' attribute always visible. It doesn't matter what it says for label-less namespaces, since it is not possible to change their allocation anyway. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-06-17s390/qdio: warn about unexpected SLSB statesJulian Wiedmann
The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: clean up usage of qdio_dataJulian Wiedmann
This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo, fix from Stefano Brivio. 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso. 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang. 4) Accidently disabling NAPI in non-error paths of macb_open(), from Charles Keepax. 5) Fix races between alx_stop and alx_remove, from Zekun Shen. 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from Michael Chan. 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai. 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen. 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei Yongjun. 10) We should not adjust the TCP window advertised when sending dup acks in non-SACK mode, because it won't be counted as a dup by the sender if the window size changes. From Eric Dumazet. 11) Destroy the right number of queues during remove in mvpp2 driver, from Sven Auhagen. 12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav Gupta, and Arnd Bergmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) e1000e: fix unused-function warning e1000: use generic power management e1000e: Do not wake up the system via WOL if device wakeup is disabled lan743x: add MODULE_DEVICE_TABLE for module loading alias mlxsw: spectrum: Adjust headroom buffers for 8x ports bareudp: Fixed configuration to avoid having garbage values mvpp2: remove module bugfix tcp: grow window for OOO packets only for SACK flows mptcp: fix memory leak in mptcp_subflow_create_socket() netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles mvpp2: ethtool rxtx stats fix MAINTAINERS: switch to my private email for Renesas Ethernet drivers rocker: fix incorrect error handling in dma_rings_init test_objagg: Fix potential memory leak in error handling net: ethernet: mtk-star-emac: simplify interrupt handling mld: fix memory leak in ipv6_mc_destroy_dev() bnxt_en: Return from timer if interface is not in open state. bnxt_en: Fix AER reset logic on 57500 chips. ...
generated by cgit (git 2.34.1) at 2025-04-16 04:03:34 +0000