| Age | Commit message (Collapse) | Author |
|---|
|
Add a driver for panels using the Novatek NT35950 Display Driver IC,
including support for the Sharp LS055D1SX04, found in some Sony Xperia
Z5 Premium and XZ Premium smartphones.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-1-angelogioacchino.delregno@somainline.org
|
|
Current code always sets reset line low in .pre_enable callback and
holds it low for 10ms. This is sub-optimal and increases the time
between enablement of the DSI83 and valid LVDS clock.
Rework the reset handling such that the reset line is held low for 10ms
both in probe() of the driver and .disable callback, which guarantees
that the reset line was always held low for more than 10ms and therefore
the reset line timing requirement is satisfied. Furthermore, move the
reset handling into .enable callback so the entire DSI83 initialization
is now in one place.
This reduces DSI83 enablement delay by up to 10ms.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210402.171595-1-marex@denx.de
|
|
Depends in how logic is connected to the board the gpio is
not stricly required.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016102232.202119-5-michael@amarulasolutions.com
|
|
W552946ABA is a panel by Wanchanglong. This panel utilizes the
Ilitek ILI9881D controller.
Add this panel's initialzation sequence and timing to ILI9881D driver.
Tested on px30-evb v11
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016102232.202119-3-michael@amarulasolutions.com
|
|
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095693-4428-1-git-send-email-wangqing@vivo.com
|
|
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095680-4377-1-git-send-email-wangqing@vivo.com
|
|
Commit build fix that I forgot to amend :-(
Fixes: 50848e3787ad ("drm/tiny: add driver for newhaven, 1.8-128160EF")
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Mack <daniel@zonque.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015150131.1020878-3-daniel@zonque.org
|
|
This patch adds support for Newhaven's NHD-1.8-128160EF display, featuring
an Ilitek ILI9163 controller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015150131.1020878-3-daniel@zonque.org
|
|
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/panel/panel-dsi-cm.c:251: WARNING: use scnprintf or sprintf.
drivers/gpu/drm/panel/panel-dsi-cm.c:271: WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634280490-4429-1-git-send-email-wangqing@vivo.com
|
|
Since we allow interlace on the encoder, also allow it on the bridge
so we can allow interlaced modes when using DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014152606.2289528-5-narmstrong@baylibre.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104658.11834-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104650.11781-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104642.11728-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104635.11675-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104627.11622-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104620.11569-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104612.11516-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104247.11270-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104240.11217-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104232.11164-1-caihuoqing@baidu.com
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104225.11111-1-caihuoqing@baidu.com
|
|
Removed extra whitespace before dev_err_probe() according to coding style.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916073706.9004-1-caihuoqing@baidu.com
|
|
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
|
|
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.
Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
|
|
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid
|
|
This adds support for the JDI R63452 Full HD LCD panel used on the
Xiaomi Mi 5 smartphone, in MIPI DSI command mode.
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210925102911.518038-1-raffaele.tranquillini@gmail.com
|
|
I got a null-ptr-deref report:
[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
kasan_report.cold+0x64/0xdb
__asan_load8+0x69/0x90
iput+0x3c/0x4a0
drm_dev_init_release+0x39/0xb0 [drm]
drm_managed_release+0x158/0x2d0 [drm]
drm_dev_init+0x3a7/0x4c0 [drm]
__devm_drm_dev_alloc+0x55/0xd0 [drm]
mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
spi_probe+0xeb/0x130
...
entry_SYSCALL_64_after_hwframe+0x44/0xae
If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.
drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode
Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.
Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013114139.4042207-1-wanghai38@huawei.com
|
|
The model and make of the LCD panel of the Vivax TPC-9150 is unknown,
hence the panel settings that were retrieved with a FEX dump are named
after the device NOT the actual panel.
The LCD in question is a 50 pin MISO TFT LCD panel of the resolution
1024x600 used by the aforementioned device.
Version 2, as Thierry kindly suggested that I fix the order in which the
panel was ordered compared to others.
Version 3, filling in the required info suggested by Sam. Plus some
factual issues that I've corrected myself (tested working)
Version 4, rearranged the display parameters and fix invalid bit format
issue. (Thanks Sam)
Version 5, referred to FEX file instead of manual debugging for
information.
Version 6, same as above. This time, it'll be documented.
A bit of context first: I experimented with this a long time ago whilst
I was first learning how to get Linux running on Allwinner boards, I
didn't have many resources at hand so this was quite slow. Anyways, I
stumbled upon this guide (https://linux-sunxi.org/LCD) and was reading
about how to setup the LCD for my tablet. Since I was able to make a
proper FEX dump, I was also able to read the correct parameters for
myself without relying on leaked documents or part numbers and whatnot.
In the FEX dump the value lcd_frm IS SET to 1, which means, at least
according to the document, that this display is INDEED an 18 bit per
pixel panel. Compiling U-Boot and seeing the tux in proper colors
confirmed this. As per Sam Ravnborg's suggestion, I've changed the panel
to his format "MEDIA_BUS_FMT_RGB666_1X7X3_SPWG", however this does not
lead to any actual change in regards to the functionality since the sunxi
panel driver just ignores this value. However, hopefully this clears up
any errors down the road as either the driver becomes advanced enough to
not ignore this value or that some other piece of software relies on
this value being known. PS: Apologies to the maintainers that have to
endure my misjudgement about how these things work.
As for the concerns about a single patch series, I wasn't sure where to
send the patches as they clearly aren't dt-bindings related and my
previous patches have ended up in drm-misc-fixes anyway. So I'm guessing
I'll be fine if I just post them in the list from last time???
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011212731.77763-1-pavlica.nikola@gmail.com
|
|
Add helper function to convert DT "data-mapping" property string value
into media bus format value, and deduplicate the code in panel-lvds.c
and lvds-codec.c .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012224252.29185-1-marex@denx.de
|
|
The "label" pointer is used for debug output. The code assumes that it
is either NULL or valid, but it is never set to NULL. It is either
valid or uninitialized.
Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
|
|
Add compatible and timings for the Innolux G070Y2-T02 panel. It is 7"
WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit.
Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014095202.16716-2-o.rempel@pengutronix.de
|
|
Fix the following fallthrough warnings:
drivers/video/fbdev/omap/omapfb_main.c:1558:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case 0:
^
drivers/video/fbdev/omap/omapfb_main.c:1558:2: note: insert 'break;' to avoid fall-through
case 0:
^
break;
1 warning generated.
This helps with the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/lkml/202110141005.hUjaYMEi-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014165320.GA1145571@embeddedor
|
|
Register a privacy-screen device on laptops with a privacy-screen,
this exports the PrivacyGuard features to user-space using a
standardized vendor-agnostic sysfs interface. Note the sysfs interface
is read-only.
Registering a privacy-screen device with the new privacy-screen class
code will also allow the GPU driver to get a handle to it and export
the privacy-screen setting as a property on the DRM connector object
for the LCD panel. This DRM connector property is a new standardized
interface which all user-space code should use to query and control
the privacy-screen.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-9-hdegoede@redhat.com
|
|
only once
Get the privacy-screen / lcdshadow ACPI handles once and cache them,
instead of retrieving them every time we need them.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-8-hdegoede@redhat.com
|
|
Factor the extended hotkey handling out of hotkey_notify_hotkey() and
into a new hotkey_notify_extended_hotkey() helper.
This is a preparation patch for adding support the privacy-screen hotkey
toggle (which needs some special handling, it should NOT send an evdev
key-event to userspace...).
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-7-hdegoede@redhat.com
|
|
Add 2 drm_connector privacy-screen helper functions:
1. drm_connector_attach_privacy_screen_provider(), this function creates
and attaches the standard privacy-screen properties and registers a
generic notifier for generating sysfs-connector-status-events on external
changes to the privacy-screen status.
2. drm_connector_update_privacy_screen(), update the privacy-screen's
sw_state if the connector has a privacy-screen.
Changes in v2:
- Do not update connector->state->privacy_screen_sw_state on
atomic-commits.
- Change drm_connector_update_privacy_screen() to take drm_connector_state
as argument instead of a full drm_atomic_state. This allows the helper
to be called by drivers when they are enabling crtcs/encoders/connectors.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-6-hdegoede@redhat.com
|
|
Add support for privacy-screen consumers to register a notifier to
be notified of external (e.g. done by the hw itself on a hotkey press)
state changes.
Changes in v2:
- Drop WARN_ON(mutex_is_locked(&priv->lock)) check in
drm_privacy_screen_call_notifier_chain() it may be locked by
another thread, which would lead to a false-positive triggering
of the check
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-5-hdegoede@redhat.com
|
|
Add X86 specific arch init code, which fills the privacy-screen lookup
table by checking for various vendor specific ACPI interfaces for
controlling the privacy-screen.
This initial version only checks for the Lenovo Thinkpad specific ACPI
methods for privacy-screen control.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-4-hdegoede@redhat.com
|
|
On some new laptops the LCD panel has a builtin electronic privacy-screen.
We want to export this functionality as a property on the drm connector
object. But often this functionality is not exposed on the GPU but on some
other (ACPI) device.
This commit adds a privacy-screen class allowing the driver for these
other devices to register themselves as a privacy-screen provider; and
allowing the drm/kms code to get a privacy-screen provider associated
with a specific GPU/connector combo.
Changes in v2:
- Make CONFIG_DRM_PRIVACY_SCREEN a bool which controls if the drm_privacy
code gets built as part of the main drm module rather then making it
a tristate which builds its own module.
- Add a #if IS_ENABLED(CONFIG_DRM_PRIVACY_SCREEN) check to
drm_privacy_screen_consumer.h and define stubs when the check fails.
Together these 2 changes fix several dependency issues.
- Remove module related code now that this is part of the main drm.ko
- Use drm_class as class for the privacy-screen devices instead of
adding a separate class for this
Changes in v3:
- Make the static inline drm_privacy_screen_get_state() stub set sw_state
and hw_state to PRIVACY_SCREEN_DISABLED to squelch an uninitialized
variable warning when CONFIG_DRM_PRIVICAY_SCREEN is not set
Changes in v4:
- Make drm_privacy_screen_set_sw_state() skip calling out to the hw if
hw_state == new_sw_state
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-3-hdegoede@redhat.com
|
|
Add support for generic electronic privacy screen properties, that
can be added by systems that have an integrated EPS.
Changes in v2 (Hans de Goede)
- Create 2 properties, "privacy-screen sw-state" and
"privacy-screen hw-state", to deal with devices where the OS might be
locked out of making state changes
- Write kerneldoc explaining how the 2 properties work together, what
happens when changes to the state are made outside of the DRM code's
control, etc.
Changes in v3 (Hans de Goede)
- Some small tweaks to the kerneldoc describing the 2 properties
Changes in v4 (Hans de Goede)
- Change the "Enabled, locked" and "Disabled, locked" hw-state enum value
names to "Enabled-locked" and "Disabled-locked". The xrandr command shows
all possible enum values separated by commas in its output, so having a
comma in an enum name is not a good idea.
- Do not add a privacy_screen_hw_state member to drm_connector_state
since this property is immutable its value must be directly stored in the
obj->properties->values array
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
|
|
Scroll acceleration is disabled in fbcon by hard-wiring
p->scrollmode = SCROLL_REDRAW. Remove the obsolete code in fbcon.c
and fbdev/core/
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YVXTYqszZix9TxjJ@gineta.localdomain
|
|
If drm_modeset_lock() returns -EDEADLK, the caller is supposed to drop
all currently held locks using drm_modeset_backoff(). Failing to do so
will result in warnings and backtraces on the paths trying to lock a
contended lock. Add support for optionally printing the backtrace on the
path that hit the deadlock and didn't gracefully handle the situation.
For example, the patch [1] inadvertently dropped the return value check
and error return on replacing calc_watermark_data() with
intel_compute_global_watermarks(). The backtraces on the subsequent
locking paths hitting WARN_ON(ctx->contended) were unhelpful, but adding
the backtrace to the deadlock path produced this helpful printout:
<7> [98.002465] drm_modeset_lock attempting to lock a contended lock without backoff:
drm_modeset_lock+0x107/0x130
drm_atomic_get_plane_state+0x76/0x150
skl_compute_wm+0x251d/0x2b20 [i915]
intel_atomic_check+0x1942/0x29e0 [i915]
drm_atomic_check_only+0x554/0x910
drm_atomic_nonblocking_commit+0xe/0x50
drm_mode_atomic_ioctl+0x8c2/0xab0
drm_ioctl_kernel+0xac/0x140
Add new CONFIG_DRM_DEBUG_MODESET_LOCK to enable modeset lock debugging
with stack depot and trace.
[1] https://lore.kernel.org/r/20210924114741.15940-4-jani.nikula@intel.com
v2:
- default y if DEBUG_WW_MUTEX_SLOWPATH (Daniel)
- depends on DEBUG_KERNEL
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001091444.8177-1-jani.nikula@intel.com
|
|
Fixes a compilation issue introduced because I forgot to test with WERROR
enabled.
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: DRI <dri-devel@lists.freedesktop.org>
Cc: nouveau@lists.freedesktop.org
Fixes: 404046cf4805 ("drm/nouveau/mmu/gp100-: drop unneeded assignment in the if condition.")
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012133334.1737918-1-kherbst@redhat.com
|
|
If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
returned. Fallback to a reasonable default (MEDIA_BUS_FMT_RGB888_1X24) in
that case.
This unbreaks e.g. using mxsfb with the nwl bridge and mipi dsi panels.
Reported-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/781f0352052cc50c823c199ef5f53c84902d0580.1633959458.git.agx@sigxcpu.org
|
|
media-bus-formats.h has them in hexadecimal as well so matching with
that file saves one conversion when debugging.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c84b34855abbb85cd25bbb5126db302f88327640.1633959458.git.agx@sigxcpu.org
|
|
This allows the DSI bridge to detect the correct bus format.
We currently only support MEDIA_BUS_FMT_RGB888_1X24.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d7ebeec861f4518c8497a5e07d09d5a9fd123d3d.1633959458.git.agx@sigxcpu.org
|
|
This allows the DSI bridge to detect the correct bus format.
We currently only support MEDIA_BUS_FMT_RGB888_1X24.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/75fbe7139a84fa133499afe242c204ba4516da98.1633959458.git.agx@sigxcpu.org
|
|
Components further up in the chain might ask us for supported formats.
Without this MEDIA_BUS_FMT_FIXED is assumed which then breaks display
output with mxsfb since it can't determine a proper bus format.
We handle the bus formats that correspond to the DSI formats the bridge
can potentially output (see chapter 13.6 of the i.MX 8MQ reference
manual) - which matches what xsfb can input.
Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1712f2b952694fd4484dfd8576fbc5b4d7adf042.1633959458.git.agx@sigxcpu.org
|
|
The copy_to/from_user() function returns the number of bytes remaining
to be copied, but we want to return -EFAULT on error.
Fixes: e4165ae8304e ("drm/v3d: add multiple syncobjs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011123303.GA14314@kili
|
|
Clean up all of the kernel-doc issues in drm_connector.c:
drivers/gpu/drm/drm_connector.c:2611: warning: Excess function parameter 'connector' description in 'drm_connector_oob_hotplug_event'
drivers/gpu/drm/drm_connector.c:2611: warning: Function parameter or member 'connector_fwnode' not described in 'drm_connector_oob_hotplug_event'
drm_connector.c:630: warning: No description found for return value of 'drm_get_connector_status_name'
drm_connector.c:715: warning: No description found for return value of 'drm_connector_list_iter_next'
drm_connector.c:785: warning: No description found for return value of 'drm_get_subpixel_order_name'
drm_connector.c:816: warning: No description found for return value of 'drm_display_info_set_bus_formats'
drm_connector.c:1331: warning: No description found for return value of 'drm_mode_create_dvi_i_properties'
drm_connector.c:1412: warning: No description found for return value of 'drm_connector_attach_content_type_property'
drm_connector.c:1492: warning: No description found for return value of 'drm_mode_create_tv_margin_properties'
drm_connector.c:1534: warning: No description found for return value of 'drm_mode_create_tv_properties'
drm_connector.c:1627: warning: No description found for return value of 'drm_mode_create_scaling_mode_property'
drm_connector.c:1944: warning: No description found for return value of 'drm_mode_create_suggested_offset_properties'
drm_connector.c:2315: warning: missing initial short description on line:
* drm_connector_set_panel_orientation_with_quirk -
[The last warning listed is probably a quirk/bug in scripts/kernel-doc.]
Fixes: 613051dac40d ("drm: locking&new iterators for connector_list")
Fixes: 522171951761 ("drm: Extract drm_connector.[hc]")
Fixes: b3c6c8bfe378 ("drm: document drm_display_info")
Fixes: 50525c332b55 ("drm: content-type property for HDMI connector")
Fixes: 6c4f52dca36f ("drm/connector: Allow creation of margin props alone")
Fixes: 69654c632d80 ("drm/connector: Split out orientation quirk detection (v2)")
Fixes: 72ad49682dde ("drm/connector: Add support for out-of-band hotplug notification (v3)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010224459.3603-1-rdunlap@infradead.org
|
