summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-05-17net: wwan: iosm: fix NULL pointer dereference when removing deviceM Chetan Kumar
In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Reported-by: Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov
In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2023-05-16 This series contains updates to ice and iavf drivers. Ahmed adds setting of missed condition for statistics which caused incorrect reporting of values for ice. For iavf, he removes a call to set VLAN offloads during re-initialization which can cause incorrect values to be set. Dawid adds checks to ensure VF is ready to be reset before executing commands that will require it to be reset on ice. --- v2: Patch 2 - Redo commit message ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offsetMarco Migliore
According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17cassini: Fix a memory leak in the error handling path of cas_init_one()Christophe JAILLET
cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17tun: Fix memory leak for detached NAPI queue.Kuniyuki Iwashima
syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841 [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035 [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline] [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline] [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584 [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17can: kvaser_pciefd: Disable interrupts in probe error pathJimmy Assarsson
Disable interrupts in error path of probe function. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Do not send EFLUSH command on TFD interruptJimmy Assarsson
Under certain circumstances we send two EFLUSH commands, resulting in two EFLUSH ack packets, while only expecting a single EFLUSH ack. This can cause the driver Tx flush completion to get out of sync. To avoid this problem, don't enable the "Transmit buffer flush done" (TFD) interrupt and remove the code handling it. Now we only send EFLUSH command after receiving status packet with "Init detected" (IDET) bit set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Empty SRB buffer in probeJimmy Assarsson
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a known state, and don't process any irrelevant packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Call request_irq() before enabling interruptsJimmy Assarsson
Make sure the interrupt handler is registered before enabling interrupts. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Clear listen-only bit if not explicitly requestedJimmy Assarsson
The listen-only bit was never cleared, causing the controller to always use listen-only mode, if previously set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()Jimmy Assarsson
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop(). Without this fix, wrong CAN state was repported after the interface was brought down. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-17wifi: b43: fix incorrect __packed annotationArnd Bergmann
clang warns about an unpacked structure inside of a packed one: drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] The problem here is that the anonymous union has the default alignment from its members, apparently because the original author mixed up the placement of the __packed attribute by placing it next to the struct member rather than the union definition. As the struct itself is also marked as __packed, there is no need to mark its members, so just move the annotation to the inner type instead. As Michael noted, the same problem is present in b43legacy, so change both at the same time. Acked-by: Michael Büsch <m@bues.ch> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
2023-05-17wifi: rtw88: sdio: Always use two consecutive bytes for word operationsMartin Blumenstingl
The Allwinner sunxi-mmc controller cannot handle word (16 bit) transfers. So and sdio_{read,write}w fails with messages like the following example using an RTL8822BS (but the same problems were also observed with RTL8822CS and RTL8723DS chips): rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13 sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2 sunxi-mmc 4021000.mmc: map DMA failed rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22 Use two consecutive single byte accesses for word operations instead. It turns out that upon closer inspection this is also what the vendor driver does, even though it does have support for sdio_{read,write}w. So we can conclude that the rtw88 chips do support word access but only on SDIO controllers that also support it. Since there's no way to detect if the controller supports word access or not the rtw88 sdio driver switches to the easiest approach: avoiding word access. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Closes: https://lore.kernel.org/linux-wireless/527585e5-9cdd-66ed-c3af-6da162f4b720@lwfinger.net/ Reported-by: Rudi Heitbaum <rudi@heitbaum.com> Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467 Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets") Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
2023-05-16Merge tag 'linux-can-fixes-for-6.4-20230515' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-15 The first 2 patches are by Oliver Hartkopp and allow the MSG_CMSG_COMPAT flag for isotp and j1939. The next patch is by Oliver Hartkopp, too and adds missing CAN XL support in can_put_echo_skb(). Geert Uytterhoeven's patch let's the bxcan driver depend on ARCH_STM32. The last 5 patches are from Dario Binacchi and also affect the bxcan driver. The bxcan driver hit mainline with v6.4-rc1 and was originally written for IP cores containing 2 CAN interfaces with shared resources. Dario's series updates the DT bindings and driver to support IP cores with a single CAN interface instance as well as adding the bxcan to the stm32f746's device tree. * tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: ARM: dts: stm32: add CAN support on stm32f746 can: bxcan: add support for single peripheral configuration ARM: dts: stm32: add pin map for CAN controller on stm32f7 ARM: dts: stm32f429: put can2 in secondary mode dt-bindings: net: can: add "st,can-secondary" property can: CAN_BXCAN should depend on ARCH_STM32 can: dev: fix missing CAN XL support in can_put_echo_skb() can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag ==================== Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failedWenchao Hao
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt. The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if ↵Wenchao Hao
dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-2-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: storvsc: Don't pass unused PFNs to Hyper-V hostMichael Kelley
In a SCSI request, storvsc pre-allocates space for up to MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If the size of the I/O request requires more PFNs, a separate memory area of exactly the correct size is dynamically allocated. But when the pre-allocated area is used, current code always passes MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While this doesn't break anything because the additional PFNs are always zero, more bytes than necessary are copied into the VMBus channel ring buffer. This takes CPU cycles and wastes space in the ring buffer. For a typical 4 Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are copied. Fix this by setting the payload_sz based on the actual number of PFNs required, not the size of the pre-allocated space. Reported-by: John Starks <jostarks@microsoft.com> Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: ufs: core: Fix MCQ nr_hw_queuesPo-Wen Kao
Since MAXQ is 0-based value, add one to obtain number of hardware queues. Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-4-powen.kao@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: ufs: core: Rename symbol sizeof_utp_transfer_cmd_desc()Po-Wen Kao
Naming the functions after standard operators like sizeof() may cause confusion. Rename it to ufshcd_get_ucd_size(). Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-3-powen.kao@mediatek.com Suggested-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16scsi: ufs: core: Fix MCQ tag calculationPo-Wen Kao
The transfer command descriptor is allocated in ufshcd_memory_alloc() and referenced by the transfer request descriptor with stride size sizeof_utp_transfer_cmd_desc() instead of sizeof(struct utp_transfer_cmd_desc). Consequently, computing tag by address offset should also refer to the same stride. Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-2-powen.kao@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-16mac80211_hwsim: fix memory leak in hwsim_new_radio_nlZhengchao Shao
When parse_pmsr_capa failed in hwsim_new_radio_nl, the memory resources applied for by pmsr_capa are not released. Add release processing to the incorrect path. Fixes: 92d13386ec55 ("mac80211_hwsim: add PMSR capability support") Reported-by: syzbot+904ce6fbb38532d9795c@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515092227.2691437-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: Add locking to the rate read flowAriel Malamud
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate for tx frames. This read flow is not protected thereby leaving a small window, a few instructions wide, open to contention by an asynchronous rate update. Indeed this race condition was hit and the update occurred in the middle of the read. Fix this by locking the lq_sta struct during read. Signed-off-by: Ariel Malamud <ariel.malamud@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: Don't use valid_links to iterate sta linksMiri Korenblit
This bitmap equals to zero when in a non-MLO mode, and then we won't be iterating on any link. Use for_each_sta_active_link() instead, as it handles also the case of non-MLO mode. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.f32a8c08730a.Ib02248cd0b7f2bc885f91005c3c110dd027f9dcd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: don't trust firmware n_channelsJohannes Berg
If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly. Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix OEM's name in the tas approved listAlon Giladi
Fix a spelling mistake. Fixes: 2856f623ce48 ("iwlwifi: mvm: Add list of OEMs allowed to use TAS") Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.4090de6d1878.If9391ef6da78f1b2cc5eb6cb8f6965816bb7a7f5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: fix OEM's name in the ppag approved listAlon Giladi
Fix a spelling mistake. Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi") Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.fdd07f36a8bf.I223e5fb16ab5c95d504c3fdaffd0bd70affad1c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix initialization of a return valueMukesh Sisodiya
In iwl_mvm_mld_update_sta(), if the flow doesn't enter for_each_sta_active_link(), the default value is returned. Set this default to -EINVAL instead of 0 to better reflect this. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.98b7e3aacf0b.I2fc274dd7e374ef7fac8e26d71c9cd73323da665@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix access to fw_id_to_mac_idGregory Greenman
RCU protected fw_id_to_mac_id can be initialized with either an error code or NULL. Thus, after dereferencing need to check the value with IS_ERR_OR_NULL() and not only that it is not NULL. Fix it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.ec5f2880e81c.Ifa8c0f451df2835bde800f5c3670cc46238a3bd8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: fw: fix DBGI dumpJohannes Berg
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM. This leads to bad register accesses because the union is built differently, there's no allocation ID, and thus the allocation ID ends up being 0x8000. Note that this was already wrong for DRAM vs. SMEM since they use different parts of the union, but the allocation ID is at the same place, so it worked. Fix all of this but set the allocation ID in a way that the offset calculation ends up without any offset. Fixes: 34bc27783a31 ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix number of concurrent link checksJohannes Berg
The concurrent link checks need to correctly differentiate between AP and non-AP, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.992b2f981ef6.I7d386c19354e9be39c4822f436dd22c93422b660@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlockJohannes Berg
Lockdep points out that we can deadlock here by calling cancel_delayed_work_sync() because that might be already running and gotten interrupted by the NAPI soft-IRQ. Even just calling something that can sleep is wrong in this context though. Luckily, it doesn't even really matter since the things we need to do are idempotent, so just drop the _sync(). Fixes: e5d153ec54f0 ("iwlwifi: mvm: fix CSA AP side") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.b1813c823b4d.I9d20cc06d24fa40b6774d3dd95ea5e2bf8dd015b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: don't double-init spinlockJohannes Berg
We don't need to (and shouldn't) initialize the spinlock during HW restart that was already initialized, so move that into the correct if block. Since then we have two consecutive if statements with the same (though inverted) condition, unify those as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.221c22cfdf4e.I2e30113ef4bd8cb5bd9e1a69e52a95671914961c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: always free dup_dataJohannes Berg
There are some assertions in the STA removal code that can fail, and in that case we may leak memory since we skip the freeing. Fix this by freeing the dup_data earlier in the function, we already have a check for when we free the station, and this we don't need to do it with and without MLD API, so it's a win all around. Fixes: a571f5f635ef ("iwlwifi: mvm: add duplicate packet detection per rx queue") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.173938681d72.Iff4b55fc52943825d6e3e28d78a24b155ea5cd22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: rfi: disable RFI featureGregory Greenman
This feature depends on a platform bugfix. Until we have a mechanism that can verify a platform has the required bugfix, disable RFI. Fixes: ef3ed33dfc8f ("wifi: iwlwifi: bump FW API to 77 for AX devices") Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Link: https://lore.kernel.org/linux-wireless/CAAJw_ZvZdFpw9W2Hisc9c2BAFbYAnQuaFFaFG6N7qPUP2fOL_w@mail.gmail.com/ Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16iavf: send VLAN offloading caps once after VFRAhmed Zaki
When the user disables rxvlan offloading and then changes the number of channels, all VLAN ports are unable to receive traffic. Changing the number of channels triggers a VFR reset. During re-init, when VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do: 1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag 2 - call iavf_set_vlan_offload_features(adapter, 0, netdev->features); The second step sends to the PF the __default__ features, in this case aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING While the first step forces the watchdog task to call netdev_update_features() -> iavf_set_features() -> iavf_set_vlan_offload_features(adapter, netdev->features, features). Since the user disabled the "rxvlan", this sets: aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING When we start processing the AQ commands, both flags are enabled. Since we process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF enabling the rxvlan offload. This breaks all communications on the VLAN net devices. Fix by removing the call to iavf_set_vlan_offload_features() (second step). Calling netdev_update_features() from watchdog task is enough for both init and reset paths. Fixes: 7598f4b40bd6 ("iavf: Move netdev_update_features() into watchdog task") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: Fix ice VF reset during iavf initializationDawid Wesierski
Fix the current implementation that causes ice_trigger_vf_reset() to start resetting the VF even when the VF-NIC is still initializing. When we reset NIC with ice driver it can interfere with iavf-vf initialization e.g. during consecutive resets induced by ice iavf ice | | |<-----------------| | ice resets vf iavf | reset | start | |<-----------------| | ice resets vf | causing iavf | initialization | error | | iavf reset end This leads to a series of -53 errors (failed to init adminq) from the IAVF. Change the state of the vf_state field to be not active when the IAVF is still initializing. Make sure to wait until receiving the message on the message box to ensure that the vf is ready and initializded. In simple terms we use the ACTIVE flag to make sure that the ice driver knows if the iavf is ready for another reset iavf ice | | | | |<------------- ice resets vf iavf vf_state != ACTIVE reset | start | | | | | iavf | reset-------> vf_state == ACTIVE end ice resets vf | | | | Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: Fix stats after PF resetAhmed Zaki
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a regression in commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") caused by missing to set "stat_offsets_loaded = false" in the ice_vsi_rebuild() path. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16xhci: Fix incorrect tracking of free space on transfer ringsMathias Nyman
This incorrect tracking caused unnecessary ring expansion in some usecases which over days of use consume a lot of memory. xhci driver tries to keep track of free transfer blocks (TRBs) on the ring buffer, but failed to add back some cancelled transfers that were turned into no-op operations instead of just moving past them. This can happen if there are several queued pending transfers which then are cancelled in reverse order. Solve this by counting the numer of steps we move the dequeue pointer once we complete a transfer, and add it to the number of free trbs instead of just adding the trb number of the current transfer. This way we ensure we count the no-op trbs on the way as well. Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context") Cc: stable@vger.kernel.org Reported-by: Miller Hunter <MillerH@hearthnhome.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242 Tested-by: Miller Hunter <MillerH@hearthnhome.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16xhci-pci: Only run d3cold avoidance quirk for s2idleMario Limonciello
Donghun reports that a notebook that has an AMD Ryzen 5700U but supports S3 has problems with USB after resuming from suspend. The issue was bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir"). As this issue only happens on S3, narrow the broken D3cold quirk to only run in s2idle. Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir") Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-16net: bcmgenet: Restore phy_stop() depending upon suspend/closeFlorian Fainelli
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-16tpm/tpm_tis: Disable interrupts for more Lenovo devicesJerry Snitselaar
The P360 Tiny suffers from an irq storm issue like the T490s, so add an entry for it to tpm_tis_dmi_table, and force polling. There also previously was a report from the previous attempt to enable interrupts that involved a ThinkPad L490. So an entry is added for it as well. Cc: stable@vger.kernel.org Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/ Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16tpm: Prevent hwrng from activating during resumeJarkko Sakkinen
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero bytes. This prevents hwrng from racing during resume. Cc: stable@vger.kernel.org Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resumeJarkko Sakkinen
Before sending a TPM command, CLKRUN protocol must be disabled. This is not done in the case of tpm1_do_selftest() call site inside tpm_tis_resume(). Address this by decorating the calls with tpm_chip_{start,stop}, which should be always used to arm and disarm the TPM chip for transmission. Finally, move the call to the main TPM driver callback as the last step because it should arm the chip by itself, if it needs that type of functionality. Cc: stable@vger.kernel.org Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Closes: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/ Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-15can: bxcan: add support for single peripheral configurationDario Binacchi
Add support for bxCAN controller in single peripheral configuration: - primary bxCAN - dedicated Memory Access Controller unit - 512-byte SRAM memory - 14 filter banks Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-5-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: CAN_BXCAN should depend on ARCH_STM32Geert Uytterhoeven
The STMicroelectronics STM32 basic extended CAN Controller (bxCAN) is only present on STM32 SoCs. Hence drop the "|| OF" part from its dependency rule, to prevent asking the user about this driver when configuring a kernel without STM32 SoC support. Fixes: f00647d8127be4d3 ("can: bxcan: add support for ST bxCAN controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/40095112efd1b2214e4223109fd9f0c6d0158a2d.1680609318.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: dev: fix missing CAN XL support in can_put_echo_skb()Oliver Hartkopp
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the correct ETH_P type of the given skbuff. When implementing the CAN XL support the new check for ETH_P_CANXL has been forgotten. Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR valueYun Lu
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a probability of failure, which shows "authentication with ... timed out". Through debugging, it was found that the RCR register has been inexplicably modified to an incorrect value, resulting in the nic not being able to receive authenticated frames. To fix this problem, add regrcr in rtl8xxxu_priv struct, and store the RCR value every time the register is written, and use it the next time the register need to be modified. Signed-off-by: Yun Lu <luyun@kylinos.cn> Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
2023-05-15wifi: brcmfmac: Check for probe() id argument being NULLHans de Goede
The probe() id argument may be NULL in 2 scenarios: 1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe the device. 2. If a user tries to manually bind the driver from sysfs then the sdio / pcie / usb probe() function gets called with NULL as id argument. 1. Is being hit by users causing the following oops on resume and causing wifi to stop working: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020 Workgueue: events_unbound async_run_entry_fn RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac] <snip> Call Trace: <TASK> brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887] ? pci_pm_resume+0x5b/0xf0 ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x47/0x150 device_resume+0xa2/0x1f0 async_resume+0x1d/0x30 <snip> Fix this by checking for id being NULL. In the PCI and USB cases try a manual lookup of the id so that manually binding the driver through sysfs and more importantly brcmf_pcie_probe() on resume will work. For the SDIO case there is no helper to do a manual sdio_device_id lookup, so just directly error out on a NULL id there. Fixes: da6d9c8ecd00 ("wifi: brcmfmac: add firmware vendor info in driver info") Reported-by: Felix <nimrod4garoa@gmail.com> Link: https://lore.kernel.org/regressions/4ef3f252ff530cbfa336f5a0d80710020fc5cb1e.camel@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230510141856.46532-1-hdegoede@redhat.com
2023-05-15wifi: rtw88: correct qsel_to_ep[] type as intPing-Ke Shih
qsel_to_ep[] can be assigned negative value, so change type from 'u8' to 'int'. Otherwise, Smatch static checker warns: drivers/net/wireless/realtek/rtw88/usb.c:219 rtw_usb_parse() warn: assigning (-22) to unsigned variable 'rtwusb->qsel_to_ep[8]' Cc: stable@vger.kernel.org Fixes: a6f187f92bcc ("wifi: rtw88: usb: fix priority queue to endpoint mapping") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/linux-wireless/c3f70197-829d-48ed-ae15-66a9de80fa90@kili.mountain/ Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230508085539.46795-1-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-05-08 01:39:07 +0000