| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Just some cleanups and bug fixes this time around:
- Align handling of the compiled-in command line with the core kernel
- Measure the initrd into the TPM also when it was loaded via the EFI
file I/O protocols
- Clean up TPM event log handling
- Sanity check the EFI memory attributes table, and apply it after
kexec too
- Assorted other fixes"
* tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Fix memory leak in efivar_ssdt_load
efi/libstub: Take command line overrides into account for loaded files
efi/libstub: Fix command line fallback handling when loading files
efi/libstub: Parse builtin command line after bootloader provided one
x86/efi: Apply EFI Memory Attributes after kexec
x86/efi: Drop support for the EFI_PROPERTIES_TABLE
efi/memattr: Ignore table if the size is clearly bogus
efi/zboot: Fix outdated comment about using LoadImage/StartImage
efi/libstub: Free correct pointer on failure
libstub,tpm: do not ignore failure case when reading final event log
tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size
tpm: do not ignore memblock_reserve return value
tpm: fix signed/unsigned bug when checking event logs
efi/libstub: measure initrd to PCR9 independent of source
efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline()
efi/libstub: fix efi_parse_options() ignoring the default command line
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
- uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in
uvc_parse_format
* tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- removal of the old omap4iss media driver
- mantis: remove orphan mantis_core.h
- add support for Raspberypi CFE
- uvc driver got a co-maintainer
- main media tree moved to git://linuxtv.org/media.git
- lots of driver cleanups, updates and fixes
* tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits)
docs: media: update location of the media patches
MAINTAINERS: update location of media main tree
media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer
media: platform: samsung: s5p-jpeg: Remove deadcode
media: qcom: camss: Add MSM8953 resources
media: dt-bindings: Add qcom,msm8953-camss
media: qcom: camss: implement pm domain ops for VFE v4.1
media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
media: adv7180: Also check for "adi,force-bt656-4"
media: dt-bindings: adv7180: Document 'adi,force-bt656-4'
media: mgb4: Fix inconsistent input/output alignment in loopback mode
media: replace obsolete hans.verkuil@cisco.com alias
Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc
media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls
media: atomisp: Add check for rgby_data memory allocation failure
media: atomisp: remove redundant re-checking of err
media: atomisp: Fix spelling errors reported by codespell
media: atomisp: Remove License information boilerplate
media: atomisp: Fix typos in comment
media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- improvement in the way hid-bpf coexists with specific drivers (others
than hid-generic) that are already bound to devices (Benjamin
Tissoires)
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He
Lugang)
- assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
Yan Zhen, Nathan Chancellor, Andy Shevchenko)
- support for Corsair Void headset family (Stuart Hayhurst)
- Support for Goodix GT7986U SPI (Charles Wang)
- initial vendor-specific driver for Kysona, currently adding support
for Kysona M600 (Lode Willems)
- other assorted code cleanups and small bugfixes all over the place
* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
HID: multitouch: make mt_set_mode() less cryptic
HID: hid-goodix-spi: Add OF supports
dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
HID: hyperv: streamline driver probe to avoid devres issues
HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
HID: rmi: Add select RMI4_F3A in Kconfig
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
HID: steelseries: Add capacity_level mapping
HID: steelseries: Fix battery requests stopping after some time
HID: hid-goodix: Fix HID get/set feature operation overwritten problem
HID: hid-goodix: Return 0 when receiving an empty HID feature package
HID: bpf: drop use of Logical|Physical|UsageRange
HID: bpf: Fix Rapoo M50 Plus Silent side buttons
HID: bpf: Fix NKRO on Mistel MD770
HID: replace BUG_ON() with WARN_ON()
HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
HID: Kysona: add basic online status
HID: Kysona: check battery status every 5s using a workqueue
HID: Kysona: Add basic battery reporting for Kysona M600
HID: Add IDs for Kysona
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay update from Andy Shevchenko:
- Move Holtek 16k33 driver to use agnostic i2c_get_match_data()
- Miscellaneuous cleanups
* tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: Remove unused functions
auxdisplay: ht16k33: Make use of i2c_get_match_data()
auxdisplay: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
- Add support for Ultra High-Speed II SD cards (UHS-II)
- Use a reset control for pwrseq_simple
- Add SD card quirk for broken poweroff notification
- Use GFP_NOIO for SD ACMD22
MMC host:
- bcm2835: Introduce proper clock handling
- mtk-sd: Add support for the Host-Software-Queue interface
- mtk-sd: Add support for the mt7988/mt8196 variants
- mtk-sd: Fix a couple of error paths in ->probe()
- sdhci: Add interface to support UHS-II SD cards
- sdhci_am654: Fixup support for changing the signal voltage level
- sdhci-cadence: Add support for the Microchip PIC64GX variant
- sdhci-esdhc-imx: Add support for eMMC HW-reset
- sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
- sdhci-of-arasan: Add support for eMMC HW-reset
- sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants
MEMSTICK:
- A couple of minor updates"
* tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits)
mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly
mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting
mmc: mtk-sd: Fix error handle of probe function
mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II
mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask
mmc: sdhci-esdhc-imx: Implement emmc hardware reset
mmc: core: Correct type in variable assignment for UHS-II
mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument
mmc: sdhci-uhs2: Remove unnecessary variables
mmc: sdhci-uhs2: Correct incorrect type in argument
mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible
mmc: sdhci-uhs2: Remove unnecessary NULL check
mmc: core: Fix error paths for UHS-II card init and re-init
mmc: core: Add error handling of sd_uhs2_power_up()
mmc: core: Simplify sd_uhs2_power_up()
mmc: bcm2835: Introduce proper clock handling
mmc: bcm2835: Fix type of current clock speed
dt-bindings: mmc: Add sdhci compatible for QCS615
mmc: core: Use GFP_NOIO in ACMD22
dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
- extend support for the wcn6855 model in the pwrseq-qcom-wcn driver
- make this driver depend on CONFIG_OF=y as it uses some very
OF-specific interfaces and depends on phandle parsing
* tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: improve support for wcn6855
power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Three new drivers, support for some new models in existing ones and
lots of various tweaks and improvements across the board (switching to
using recommended APIs, code shrink and simplification, etc.).
Also a new feature in the character device uAPI where we now notify
the user-space about changes triggered by in-kernel users as well, not
only when they were done by other user-space agents.
Summary:
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO
descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for
consistency with other places
- modify the behavior of the sysfs interface by no longer exporting
lines that are named inside the driver code or board files with the
sysfs links bearing the line names as this has for many years been
largely unused due to the prevalence of DT, ACPI and firmware nodes
over board files and made the API inconsistent
- for GPIO interrupt providers: free irqs that are still requested by
users when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested,
released, reconfigured) triggered from the kernel as well (until
now we'd only do this for changes triggered from user-space)
- to that end: modify the internal workings of the notification
mechanism by switching to an atomic notifier which allows us to
send events from atomic context
- also to that end store the debounce period in the GPIO descriptor
struct and not in the character device context struct
- while at it, also cover the corner-case of users introducing
changes over sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to
user-space as it can still request them as GPIOs
New drivers:
- GPIO part of the MFD Congatec Board Controller
- PolarFire GPIO controller
- GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones
across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or
entirely remove the driver's remove() callback (grgpio, amdpt,
menz127, max730x, ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid
some line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the
fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and
gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the
conversion to remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
this deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in
gpiolib-of and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to
gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools"
* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
gpio: tegra186: Allow to enable driver on Tegra234
gpio: grgpio: Add NULL check in grgpio_probe
tools: gpio: Fix several incorrect format specifiers
gpio: mpfs: add CoreGPIO support
gpio: rockchip: support new version GPIO
gpio: rockchip: change the GPIO version judgment logic
gpio: rockchip: explan the format of the GPIO version ID
gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
MAINTAINERS: add gpio driver to PolarFire entry
gpio: Get rid of GPIOF_ACTIVE_LOW
USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
leds: gpio: Avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
gpio: Use of_property_present() for non-boolean properties
gpio: mpfs: add polarfire soc gpio support
gpio: altera: Drop legacy-of-mm-gpiochip.h header
gpio: pcie-idio-24: Replace deprecated PCI functions
gpio: pci-idio-16: Replace deprecated PCI functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains a new abstraction for PWM waveforms that is more
expressive that the legacy one. Compared to the old abstraction it
contains a duty_offset member instead of polarity. This new
abstraction is already used in an ADC driver merged into the iio tree.
The new API requires changes to the lowlevel drivers. For now there
are two drivers that are converted to the new API (axi-pwmgen and
stm32). Converted drivers continue to work with the old API. Drivers
not yet converted only work with the older API.
Otherwise it's the usual collection of fixes, cleanups and dt doc
updates.
This time around thanks go to Andy Shevchenko, Clark Wang, Conor
Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang,
Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code
contributions, testing and review"
* tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Assume a disabled PWM to emit a constant inactive output
pwm: core: export pwm_get_state_hw()
pwm: core: use device_match_name() instead of strcmp(dev_name(...
dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3
pwm: imx27: Use clk_bulk_*() API to simplify clock handling
pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle
pwm: axi-pwmgen: Enable FORCE_ALIGN by default
pwm: axi-pwmgen: Rename 0x10 register
dt-bindings: pwm: amlogic: Document C3 PWM
pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip
pwm: atmel-tcb: Use min() macro
pwm: stm32: Fix error checking for a regmap_read() call
pwm: Add kernel doc for members added to pwm_ops recently
pwm: Reorder symbols in core.c
pwm: stm32: Implementation of the waveform callbacks
pwm: axi-pwmgen: Implementation of the waveform callbacks
pwm: Add tracing for waveform callbacks
pwm: Provide new consumer API functions for waveforms
pwm: New abstraction for PWM waveforms
pwm: Add more locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The only real core work we've got this time around is the completion
of the transition to the new host/target naming for the core APIs,
Kconfig still needs doing but that's a lot less invasive.
Otherwise the big changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging
helper in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers"
* tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
spi: imx: support word delay
spi: imx: pass struct spi_transfer to prepare_transfer()
spi: cs42l43: Add GPIO speaker id support to the bridge configuration
spi: Delete useless checks
spi: apple: Remove unnecessary .owner for apple_spi_driver
spi: spidev_test: add support for word delay
spi: apple: Add driver for Apple SPI controller
spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers
spi: Use of_property_present() for non-boolean properties
spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time
spi: spi-mem: rtl-snand: Correctly handle DMA transfers
spi: tegra210-quad: Avoid shift-out-of-bounds
spi: axi-spi-engine: Emit trace events for spi transfers
dt-bindings: spi: sprd,sc9860-spi: convert to YAML
spi: Replace deprecated PCI functions
spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi
spi: spi-mem: Add Realtek SPI-NAND controller
dt-bindings: spi: Add realtek,rtl9301-snand
spi: make class structs const
spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a quite quiet release for regulators on the drivers front,
but we do have two small but useful core improvements:
- Improve handling of cases where DT platforms specify both DT and
init_data based configuration for a single regulator.
- A helper of_regulator_get_optional() to simplify writing generic
bindings for regulator consumers in subsystems.
There's also some YAML conversions for the DT bindings which are a big
part of the diffstat"
* tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies
regulator: Switch back to struct platform_driver::remove()
regulator: doc: remove documentation comment for regulator_init
regulator: doc: add missing documentation for init_cb
regulator: rk808: Restrict DVS GPIOs to the RK808 variant only
regulator: rk808: Use dev_err_probe() in the probe path
regulator: rk808: Perform trivial code cleanups
regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855
regulator: dt-bindings: lltc,ltc3676: convert to YAML
regulator: core: Use fsleep() to get best sleep mechanism
regulator: core: remove machine init callback from config
regulator: core: add callback to perform runtime init
regulator: core: do not silently ignore provided init_data
regulator: max5970: Drop unused structs
regulator: dt-bindings: vctrl-regulator: convert to YAML
regulator: qcom-smd: make smd_vreg_rpm static
regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe()
regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0
regulator: Add devres version of of_regulator_get_optional()
regulator: Add of_regulator_get_optional() for pure DT regulator lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main thing for regmap this time around is some improvements of the
lockdep annotations which stop some false positives. We also have one
new helper for setting a bitmask to the same value, and several test
improvements"
* tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: provide regmap_assign_bits()
regmap: irq: Set lockdep class for hierarchical IRQ domains
regmap: maple: Provide lockdep (sub)class for maple tree's internal lock
regmap: kunit: Fix repeated test param
regcache: Improve documentation of available cache types
regmap: Specifically test writing 0 as a value to sparse caches
regmap-irq: Consistently use memset32() in regmap_irq_thread()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Print more precise information about the printk log buffer memory
usage.
- Make sure that the sysrq title is shown on the console even when
deferred.
- Do not enable earlycon by `console=` which is meant to disable the
default console.
* tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: add dummy printk_force_console_enter/exit helpers
tty: sysrq: Use printk_force_console context on __handle_sysrq
printk: Introduce FORCE_CON flag
printk: Improve memory usage logging during boot
init: Don't proxy `console=` to earlycon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lockdep:
- Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING (Sebastian Andrzej
Siewior)
- Add lockdep_cleanup_dead_cpu() (David Woodhouse)
futexes:
- Use atomic64_inc_return() in get_inode_sequence_number() (Uros
Bizjak)
- Use atomic64_try_cmpxchg_relaxed() in get_inode_sequence_number()
(Uros Bizjak)
RT locking:
- Add sparse annotation PREEMPT_RT's locking (Sebastian Andrzej
Siewior)
spinlocks:
- Use atomic_try_cmpxchg_release() in osq_unlock() (Uros Bizjak)
atomics:
- x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() (Uros Bizjak)
- x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() (Uros
Bizjak)
KCSAN, seqlocks:
- Support seqcount_latch_t (Marco Elver)
<linux/cleanup.h>:
- Add if_not_guard() conditional guard helper (David Lechner)
- Adjust scoped_guard() macros to avoid potential warning (Przemek
Kitszel)
- Remove address space of returned pointer (Uros Bizjak)
WW mutexes:
- locking/ww_mutex: Adjust to lockdep nest_lock requirements (Thomas
Hellström)
Rust integration:
- Fix raw_spin_lock initialization on PREEMPT_RT (Eder Zulian)
Misc cleanups & fixes:
- lockdep: Fix wait-type check related warnings (Ahmed Ehab)
- lockdep: Use info level for initial info messages (Jiri Slaby)
- spinlocks: Make __raw_* lock ops static (Geert Uytterhoeven)
- pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase
(Qiuxu Zhuo)
- iio: magnetometer: Fix if () scoped_guard() formatting (Stephen
Rothwell)
- rtmutex: Fix misleading comment (Peter Zijlstra)
- percpu-rw-semaphores: Fix grammar in percpu-rw-semaphore.rst (Xiu
Jianfeng)"
* tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
locking/Documentation: Fix grammar in percpu-rw-semaphore.rst
iio: magnetometer: fix if () scoped_guard() formatting
rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT
kcsan, seqlock: Fix incorrect assumption in read_seqbegin()
seqlock, treewide: Switch to non-raw seqcount_latch interface
kcsan, seqlock: Support seqcount_latch_t
time/sched_clock: Broaden sched_clock()'s instrumentation coverage
time/sched_clock: Swap update_clock_read_data() latch writes
locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu()
locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64()
cleanup: Add conditional guard helper
cleanup: Adjust scoped_guard() macros to avoid potential warning
locking/osq_lock: Use atomic_try_cmpxchg_release() in osq_unlock()
cleanup: Remove address space of returned pointer
locking/rtmutex: Fix misleading comment
locking/rt: Annotate unlock followed by lock for sparse.
locking/rt: Add sparse annotation for RCU.
locking/rt: Remove one __cond_lock() in RT's spin_trylock_irqsave()
locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks.
locking/pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Do the proper memory conversion of guest memory in order to be able
to kexec kernels in SNP guests along with other adjustments and
cleanups to that effect
- Start converting and moving functionality from the sev-guest driver
into core code with the purpose of supporting the secure TSC SNP
feature where the hypervisor cannot influence the TSC exposed to the
guest anymore
- Add a "nosnp" cmdline option in order to be able to disable SNP
support in the hypervisor and thus free-up resources which are not
going to be used
- Cleanups
[ Reminding myself about the endless TLA's again: SEV is the AMD Secure
Encrypted Virtualization - Linus ]
* tag 'x86_sev_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Cleanup vc_handle_msr()
x86/sev: Convert shared memory back to private on kexec
x86/mm: Refactor __set_clr_pte_enc()
x86/boot: Skip video memory access in the decompressor for SEV-ES/SNP
virt: sev-guest: Carve out SNP message context structure
virt: sev-guest: Reduce the scope of SNP command mutex
virt: sev-guest: Consolidate SNP guest messaging parameters to a struct
x86/sev: Cache the secrets page address
x86/sev: Handle failures from snp_init()
virt: sev-guest: Use AES GCM crypto library
x86/virt: Provide "nosnp" boot option for sev kernel command line
x86/virt: Move SEV-specific parsing into arch/x86/virt/svm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Bluefield-2 SOCs to bluefield_edac
- Add support for Intel Panther Lake-H to igen6_edac
- Add polling support to igen6_edac as some Intel M100 chips have
trouble with error interrupts
- Add Kaby Lake-S support to ie31200_edac
- Fix memory source detection in the SKX common module which is used by
a couple of Intel EDAC drivers
- Add support for the NXP i.MX9 memory controller to fsl_edac
- The usual fixes and cleanups all over the place
* tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Add polling support
EDAC/igen6: Initialize edac_op_state according to the configuration data
EDAC/igen6: Avoid segmentation fault on module unload
EDAC/ie31200: Add Kaby Lake-S dual-core host bridge ID
MAINTAINERS: Change FSL DDR EDAC maintainership
EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator
EDAC/skx_common: Differentiate memory error sources
EDAC/fsl_ddr: Add support for i.MX9 DDR controller
dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller
EDAC/fsl_ddr: Fix bad bit shift operations
EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata
EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
RAS/AMD/ATL: Add debug prints for DF register reads
EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2
EDAC/bluefield: Fix potential integer overflow
EDAC/igen6: Add Intel Panther Lake-H SoCs support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NCT7363Y
Added support for new chips to existing drivers:
- The tmp180 driver now supports NXP p3t1085, including its I3C mode
- The ina2xx driver now supports SY24655 and INA260
- The amc6821 driver now supports tsd,mule
Other notable improvements:
- The sht4x driver now supports the chip heater
- The pmbus/isl68137 driver now supports a voltage divider on Vout
- The cros_ec driver registers with the thermal framework
- The pmbus/ltc2978 driver now supports LTC7841
- The PMBus core now allow drivers to override WRITE_PROTECT
Various other minor improvements and cleanups"
* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
hwmon: tmp108: fix I3C dependency
hwmon: (cros_ec) register thermal sensors to thermal framework
hwmon: (tmp108) Add support for I3C device
hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
hwmon: (pwm-fan) Introduce start from stopped state handling
dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
hwmon: (tmp108) Add NXP p3t1085 support
dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
hwmon: (sch5627, max31827) Fix typos in driver documentation
hwmon: (jc42) Drop of_match_ptr() protection
hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
dt-bindings: hwmon: pmbus: add ti tps25990 support
hwmon: (pmbus/core) clear faults after setting smbalert mask
hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
hwmon: (pmbus) add documentation for existing flags
hwmon: (ina226) Add support for SY24655
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are thermal core changes, including the addition of support for
temperature thresholds that can be set from user space, fixes related
to thermal zone initialization, suspend/resume and exit, locking
rework and rearrangement of the code handling thermal zone temperature
updates.
Specifics:
- Add support for thermal thresholds that can be added and removed
from user space via netlink along with a related library update
(Daniel Lezcano)
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki)
- Rearrange locking in the thermal core to use guards (Rafael
Wysocki)
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table
walks in the thermal core (Rafael Wysocki)
- Fix and clean up the thermal testing facility code (Rafael Wysocki)
- Fix a Power Allocator thermal governor issue (ZhengShaobo)"
* tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (45 commits)
thermal: testing: Initialize some variables annoteded with _free()
thermal: testing: Use DEFINE_FREE() and __free() to simplify code
thermal: testing: Simplify tt_get_tt_zone()
thermal: gov_power_allocator: Granted power set to max when nobody request power
thermal: core: Relocate thermal zone initialization routine
thermal: core: Use trip lists for trip crossing detection
thermal: core: Eliminate thermal_zone_trip_down()
thermal: core: Relocate functions that update trip points
thermal: core: Move some trip processing to thermal_trip_crossed()
thermal: core: Pass trip descriptor to thermal_trip_crossed()
thermal: core: Rearrange __thermal_zone_device_update()
thermal: core: Prepare for moving trips between sorted lists
thermal: core: Rename trip list node in struct thermal_trip_desc
thermal: core: Build sorted lists instead of sorting them later
thermal/lib: Fix memory leak on error in thermal_genl_auto()
thermal: thresholds: Fix thermal lock annotation issue
tools/thermal/thermal-engine: Take into account the thresholds API
tools/lib/thermal: Add the threshold netlink ABI
tools/lib/thermal: Make more generic the command encoding function
thermal: netlink: Add the commands and the events for the thresholds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of changes this time.
They are mostly fixes and cleanups, but one of them causes it to
become the default cpufreq driver on some AMD server platforms.
Apart from that, the menu cpuidle governor is modified to not use
iowait any more, the intel_idle gets a custom C-states table for
Granite Rapids Xeon D, and the intel_pstate driver will use a more
aggressive Balance- performance default EPP value on Granite Rapids
now.
There are also some fixes, cleanups and tooling updates.
Specifics:
- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar)
- Enable amd-pstate by default on servers starting with newer AMD
Epyc processors (Swapnil Sapkal)
- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar)
- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello)
- Do other assorted fixes and cleanups in amd-pstate (Dhananjay
Ugwekar and Mario Limonciello)
- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada)
- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae)
- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle)
- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König)
- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz)
- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy)
- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan)
- Remove iowait influence from the menu cpuidle governor (Christian
Loehle)
- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba)
- Update pm-graph to v5.13 (Todd Brandt)
- Add documentation for some recently introduced cpupower utility
options (Tor Vic)
- Make cpupower inform users where cpufreq-bench.conf should be
located when opening it fails (Peng Fan)
- Allow overriding cross-compiling env params in cpupower (Peng Fan)
- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV)
- Improve disable c_state block in cpupower bindings and add a test
to confirm that CPU state is disabled to it (John B. Wyatt IV)
- Add Chinese Simplified translation to cpupower (Kieran Moy)
- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon)"
* tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
cpufreq: ACPI: Simplify MSR read on the boot CPU
sched/cpufreq: Ensure sd is rebuilt for EAS check
intel_idle: add Granite Rapids Xeon D support
PM: EM: Add min/max available performance state limits
cpufreq/amd-pstate: Move registration after static function call update
cpufreq/amd-pstate: Push adjust_perf vfunc init into cpu_init
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
cpufreq/amd-pstate: Do not attempt to clear MSR_AMD_CPPC_ENABLE
cpufreq/amd-pstate: Rename functions that enable CPPC
cpufreq/amd-pstate-ut: Add fix for min freq unit test
amd-pstate: Switch to amd-pstate by default on some Server platforms
amd-pstate: Set min_perf to nominal_perf for active mode performance gov
cpufreq/amd-pstate: Remove the redundant amd_pstate_set_driver() call
cpufreq/amd-pstate: Remove the switch case in amd_pstate_init()
cpufreq/amd-pstate: Call amd_pstate_set_driver() in amd_pstate_register_driver()
cpufreq/amd-pstate: Call amd_pstate_register() in amd_pstate_init()
cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
cpufreq/amd-pstate: Remove the redundant verify() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Do not double register "simple-framebuffer" platform device if
Generic System Framebuffers (sysfb) already did that
- Fix a missing of unregistering platform driver in error handling path
* tag 'chrome-platform-firmware-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: Unregister driver_info on failure
firmware: coreboot: Don't register a pdev if screen_info data is present
firmware: sysfb: Add a sysfb_handles_screen_info() helper function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Fixes:
- Fix a leak of fwnode refcount.
Cleanups:
- Drop unused I2C driver data
- Move back from platform_driver::remove_new() to
platform_driver::remove()"
* tag 'chrome-platform-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Switch back to struct platform_driver::remove()
platform/chrome: cros_ec_typec: fix missing fwnode reference decrement
platform/chrome: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series for booting as a PVH guest, doing some cleanups after the
previous work to make PVH boot code position independent
- a fix of the xenbus driver avoiding a leak in an error case
* tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
x86/pvh: Avoid absolute symbol references in .head.text
x86/xen: Avoid relocatable quantities in Xen ELF notes
x86/pvh: Omit needless clearing of phys_base
x86/pvh: Use correct size value in GDT descriptor
x86/pvh: Call C code via the kernel virtual mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: dts: realtek: Add I2C controllers
mips: dts: realtek: Add syscon-reboot node
MIPS: loongson3_defconfig: Enable blk_dev_nvme by default
MIPS: loongson3_defconfig: Update configs dependencies
MAINTAINERS: Remove linux-mips.org references
MAINTAINERS: Retire Ralf Baechle
TC: Fix the wrong format specifier
MIPS: kernel: proc: Use str_yes_no() helper function
MIPS: mobileye: eyeq6h-epm6: Use eyeq6h in the board device tree
mips: bmips: bcm6358/6368: define required brcm,bmips-cbr-reg
MIPS: Allow using more than 32-bit addresses for reset vectors when possible
mips: asm: fix warning when disabling MIPS_FP_SUPPORT
mips: sgi-ip22: Replace "s[n]?printf" with sysfs_emit in sysfs callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add firmware sysfs interface which allows user space to retrieve the
dump area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the
complete associated Channel-Measurements Characteristics Block
available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to
KVM code. This is the first step to make s390 KVM page fault handling
similar to other architectures. With this first step the main fault
handler does not have any special handling anymore, and therefore
convert it to support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations:
- Provide a cmpxchg inline assembly which makes use of this, and
provide all variants of arch_try_cmpxchg() so that the compiler
can generate slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros),
and convert all inline assemblies to make use of them, so that
depending on compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the
Query Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so
that the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID
per port. Additionally improve the overall robustness and usability
of the multifunction support
- Various other small improvements, fixes, and cleanups
* tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits)
s390/cio/ioasm: Convert to use flag output macros
s390/cio/qdio: Convert to use flag output macros
s390/sclp: Convert to use flag output macros
s390/dasd: Convert to use flag output macros
s390/boot/physmem: Convert to use flag output macros
s390/pci: Convert to use flag output macros
s390/kvm: Convert to use flag output macros
s390/extmem: Convert to use flag output macros
s390/string: Convert to use flag output macros
s390/diag: Convert to use flag output macros
s390/irq: Convert to use flag output macros
s390/smp: Convert to use flag output macros
s390/uv: Convert to use flag output macros
s390/pai: Convert to use flag output macros
s390/mm: Convert to use flag output macros
s390/cpu_mf: Convert to use flag output macros
s390/cpcmd: Convert to use flag output macros
s390/topology: Convert to use flag output macros
s390/time: Convert to use flag output macros
s390/pageattr: Convert to use flag output macros
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Fix typos in comments (Yan Zhen)
- Remove unused macro definitions (Damien Le Moal)
- Switch back to the .remove() callback (Uwe Kleine-König)
- Make use of the get_unaligned_be24() helper instead of open coding
(Andy Shevchenko)
- Refactor and cleanup ata_scsi_simulate() command emulation, such that
all commands use ata_scsi_rbuf_fill() with its own callback (Damien
Le Moal)
- Improve ata_scsi_simulate() command emulation by accurately setting
the SCSI command residual (number of bytes not filled) in the command
reply (Damien Le Moal)
- Add missing iommus property in ahci-platform device tree binding
(Frank Wunderlich)
* tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-platform: add missing iommus property
ata: libata-scsi: Return residual for emulated SCSI commands
ata: libata-scsi: Remove struct ata_scsi_args
ata: libata-scsi: Document all VPD page inquiry actors
ata: libata-scsi: Refactor ata_scsiop_maint_in()
ata: libata-scsi: Refactor ata_scsiop_read_cap()
ata: libata-scsi: Refactor ata_scsi_simulate()
ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24()
ata: Switch back to struct platform_driver::remove()
ata: libata: Remove unused macro definitions
ata: Fix typos in the comment
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang)
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
- support for Corsair Void headset family (Stuart Hayhurst)
|
|
- Support for Goodix GT7986U SPI (Charles Wang)
- assorted code cleanups and fixes (Charles Wang)
|
|
- code cleanup (Uwe Kleine-König)
|
|
- exposing firmware versions for Intel-ISH devices that load
firmware from the host (Zhang Lixu)
- switch to flex-array members (Erick Archer)
|
|
- initial vendor-specific driver for Kysona, currently adding support for
Kysona M600 (Lode Willems)
|
|
- unused variable removal in hidpp_root_get_feature() (Bastien Nocera)
|
|
- code cleanup for mt_set_mode() (Dmitry Torokhov)
|
|
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
