summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-03-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes plus the removal of stale board support code: - Remove the board support code from the clpx711x clocksource driver. This change had fallen through the cracks and I'm sending it now rather than dealing with people who want to improve that stale code for 3 month. - Use the proper clocksource mask on RICSV - Make local scope functions and variables static" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/clps711x: Remove board support clocksource/drivers/riscv: Fix clocksource mask clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static clocksource/drivers/clps711x: Make clps711x_clksrc_init() static time/jiffies: Make refined_jiffies static
2019-03-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Remove secondary GIC support on systems w/o device-tree support - A set of small fixlets in various irqchip drivers - static and fall-through annotations - Kernel doc and typo fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Mark expected switch case fall-through genirq/devres: Remove excess parameter from kernel doc irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static irqchip/mbigen: Don't clear eventid when freeing an MSI irqchip/stm32: Don't set rising configuration registers at init irqchip/stm32: Don't clear rising/falling config registers at init dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support irqchip/mmp: Make mmp_irq_domain_ops static irqchip/brcmstb-l2: Make two init functions static genirq: Fix typo in comment of IRQD_MOVE_PCNTXT irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp irqchip/gic: Drop support for secondary GIC in non-DT systems irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
2019-03-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a wrong __percpu structure declaration in intel_powerclamp driver (Luc Van Oostenryck) - Fix truncated name of the idle injection kthreads created by intel_powerclamp driver (Zhang Rui) - Fix the missing UUID supports in int3400 thermal driver (Matthew Garrett) - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver (Phil Elwell) - A couple of trivial fixes/cleanups in some SoC thermal drivers * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel_powerclamp: fix truncated kthread name thermal: mtk: Allocate enough space for mtk_thermal. thermal/int340x_thermal: fix mode setting thermal/int340x_thermal: Add additional UUIDs thermal: cpu_cooling: Remove unused cur_freq variable thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs thermal: samsung: Fix incorrect check after code merge thermal/intel_powerclamp: fix __percpu declaration of worker_data
2019-03-24Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay updates from Miguel Ojeda: "A few fixes and improvements for auxdisplay: - Series to fix a memory leak in hd44780 while introducing charlcd_free(). From Andy Shevchenko - Series to clean up the Kconfig menus and a couple of improvements for charlcd. From Mans Rullgard" * tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux: auxdisplay: charlcd: make backlight initial state configurable auxdisplay: charlcd: simplify init message display auxdisplay: deconfuse configuration auxdisplay: hd44780: Convert to use charlcd_free() auxdisplay: panel: Convert to use charlcd_free() auxdisplay: charlcd: Introduce charlcd_free() helper auxdisplay: charlcd: Move to_priv() to charlcd namespace auxdisplay: hd44780: Fix memory leak on ->remove()
2019-03-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes to four drivers and two core fixes. One core fix simply corrects a missed destroy_rcu_head() but the other is hopefully the end of an ongoing effort to make suspend/resume play nicely with scsi quiesce" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsi: Fix empty event pool access during host removal scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset() scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID scsi: qla2xxx: Fix FC-AL connection target discovery scsi: core: Avoid that a kernel warning appears during system resume scsi: core: Also call destroy_rcu_head() for passthrough requests scsi: iscsi: flush running unbind operations when removing a session
2019-03-24clocksource/drivers/clps711x: Remove board supportAlexander Shiyan
Since board support for the CLPS711X platform was removed, remove the board support from the clps711x-timer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
2019-03-23Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes/changes that should go into this series. This contains: - Kernel doc / comment updates (Bart, Shenghui) - Un-export of core-only used function (Bart) - Fix race on loop file access (Dongli) - pf/pcd queue cleanup fixes (me) - Use appropriate helper for RESTART bit set (Yufen) - Use named identifier for classic poll (Yufen)" * tag 'for-linus-20190323' of git://git.kernel.dk/linux-block: sbitmap: trivial - update comment for sbitmap_deferred_clear_bit blkcg: Fix kernel-doc warnings blk-iolatency: #include "blk.h" block: Unexport blk_mq_add_to_requeue_list() block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx loop: access lo_backing_file only when the loop device is Lo_bound blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART paride/pcd: cleanup queues when detection fails paride/pf: cleanup queues when detection fails
2019-03-23Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A follow up for the new alloc_size logic and a blacklisting fix, marked for stable" * tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client: rbd: drop wait_for_latest_osdmap() libceph: wait for latest osdmap in ceph_monc_blacklist_add() rbd: set io_min, io_opt and discard_granularity to alloc_size
2019-03-23clocksource/drivers/riscv: Fix clocksource maskAtish Patra
For all riscv architectures (RV32, RV64 and RV128), the clocksource is a 64 bit incrementing counter. Fix the clock source mask accordingly. Tested on both 64bit and 32 bit virt machine in QEMU. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-riscv@lists.infradead.org Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
2019-03-22clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction staticYueHaibing
Fix sparse warning: drivers/clocksource/mips-gic-timer.c:70:18: warning: symbol 'gic_compare_irqaction' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() staticYueHaibing
Fix sparse warning: drivers/clocksource/timer-ti-dm.c:589:5: warning: symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() staticYueHaibing
Fix sparse warnings: drivers/clocksource/tcb_clksrc.c:74:6: warning: symbol 'tc_clksrc_suspend' was not declared. Should it be static? drivers/clocksource/tcb_clksrc.c:89:6: warning: symbol 'tc_clksrc_resume' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <nicolas.ferre@microchip.com> Cc: <daniel.lezcano@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/clps711x: Make clps711x_clksrc_init() staticYueHaibing
Fix sparse warning: drivers/clocksource/clps711x-timer.c:96:13: warning: symbol 'clps711x_clksrc_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Cc: <shc_work@mail.ru> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
2019-03-22Merge tag 'iommu-fixes-v5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE - Fix for IOVA code to trigger the slow-path less often - Two fixes for Intel VT-d to avoid writing to read-only registers and to flush the right domain id for the default domains in scalable mode * tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Save the right domain ID used by hardware iommu/vt-d: Check capability before disabling protected memory iommu/iova: Fix tracking of recently failed iova address iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE
2019-03-22Merge tag 'devprop-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static
2019-03-22Merge tag 'acpi-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent device references acquired by bus_find_device() in acpi_dev_present() from being leaked (Andy Shevchenko)" * tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / utils: Drop reference in test for device presence
2019-03-22Merge tag 'pm-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These rearrange some code in the generic power domains (genpd) framework to avoid a potential deadlock and make the turbostat utility behave more as expected. Specifics: - Rearrange the generic power domains (genpd) code to avoid a potential deadlock possible due to its interactions with the clock framework (Jiada Wang) - Make turbostat return the exit status of the command run under it if that command fails (David Arcari)" * tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Avoid a potential deadlock tools/power turbostat: return the exit status of a command
2019-03-22Merge tag 'mmc-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v5.1: - alcor: Fix DMA reads - renesas_sdhi: Limit block count to 16-bit for old revisions - sdhci-omap: Fixup support for read-only pins - mxcmmc: Revert support for highmem pages - davinci/pxamci: Fix clang build warnings" * tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: limit block count to 16 bit for old revisions mmc: alcor: fix DMA reads mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" mmc: davinci: remove extraneous __init annotation mmc: pxamci: fix enum type confusion
2019-03-22iommu/vt-d: Save the right domain ID used by hardwareLu Baolu
The driver sets a default domain id (FLPT_DEFAULT_DID) in the first level only pasid entry, but saves a different domain id in @sdev->did. The value saved in @sdev->did will be used to invalidate the translation caches. Hence, the driver might result in invalidating the caches with a wrong domain id. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/vt-d: Check capability before disabling protected memoryLu Baolu
The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/iova: Fix tracking of recently failed iova addressRobert Richter
If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-21Merge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes. Seems to be lots of little minor ones for regressions in rc1, and some cleanups. The exynos one is the largest one, and is for a hw difference between exynos versions" * tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/dmem: empty chunk do not have a buffer object associated with them. drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure drm/nouveau/dmem: Fix a NULL vs IS_ERR() check drm/nouveau/dmem: remove set but not used variable 'drm' drm/exynos/mixer: fix MIXER shadow registry synchronisation code drm/vmwgfx: Don't double-free the mode stored in par->set_mode drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's drm/amdgpu: fix invalid use of change_bit drm/amdgpu: revert "cleanup setting bulk_movable" drm/i915: Sanity check mmap length against object size drm/i915: Fix off-by-one in reporting hanging process drm/i915/bios: assume eDP is present on port A when there is no VBT drm/udl: use drm_gem_object_put_unlocked.
2019-03-22Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes - Parially revert a bulk move clean up change to fix a ref count bug - Fix invalid use of change_bit that caused a crash on PPC64 and ARM64 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321020933.3508-1-alexander.deucher@amd.com
2019-03-22Merge branch 'vmwgfx-fixes-5.1' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Two fixes CC'd stable. One fix for a long-standing a bit hard-to-trigger fbdev modesetting bug and one out-of-bo-id fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321112026.114328-1-thellstrom@vmware.com
2019-03-22Merge tag 'exynos-drm-fixes-for-5.1-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - Fix page fault issue at Mixer device . This patch fixes the page fault issue by correcting sychronization method for updating shadow registers for Mixer device. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553162223-10090-1-git-send-email-inki.dae@samsung.com
2019-03-22Merge tag 'drm-intel-fixes-2019-03-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes A protection on our mmap against attempts to map past the end of the object; plus a fix off-by-one in our hang report and a protection; and a fix for eDP panels on Gen9 platforms on VBT absence. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320201451.GA7993@intel.com
2019-03-22Merge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Some minor nouveau dmem and other fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==kMkD6n-cS9KpQBcTU1E8p7Wc+H1ZuOhSfD7yTFJVvkw@mail.gmail.com
2019-03-22drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.Jérôme Glisse
Empty chunk do not have a bo associated with them so no need to pin/unpin on suspend/resume. This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failureYueHaibing
pm_runtime_get_sync returns negative on failure. Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/dmem: Fix a NULL vs IS_ERR() checkDan Carpenter
The hmm_devmem_add() function doesn't return NULL, it returns error pointers. Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/dmem: remove set but not used variable 'drm'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free': drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning: variable 'drm' set but not used [-Wunused-but-set-variable] struct nouveau_drm *drm; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-21irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps staticYueHaibing
Fix sparse warning: drivers/irqchip/irq-mvebu-sei.c:481:23: warning: symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <jason@lakedaemon.net> Cc: <andrew@lunn.ch> Cc: <gregory.clement@bootlin.com> Cc: <sebastian.hesselbarth@gmail.com> Cc: <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190321151448.15600-1-yuehaibing@huawei.com
2019-03-21Merge tag 'irqchip-5.1-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0)
2019-03-21irqchip/mbigen: Don't clear eventid when freeing an MSIJianguo Chen
mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number. The eventid clear call trace: free_irq __free_irq irq_shutdown irq_domain_deactivate_irq __irq_domain_deactivate_irq __irq_domain_deactivate_irq msi_domain_deactivate platform_msi_write_msg mbigen_write_msg Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com> [maz: massaged subject] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/stm32: Don't set rising configuration registers at initFabien Dessenne
The rising configuration status register (rtsr) is not banked. As it is shared with the co-processor, it should not be written at probe time, else the co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/stm32: Don't clear rising/falling config registers at initFabien Dessenne
Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/mmp: Make mmp_irq_domain_ops staticYueHaibing
Fix sparse warning: drivers/irqchip/irq-mmp.c:182:29: warning: symbol 'mmp_irq_domain_ops' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/brcmstb-l2: Make two init functions staticYueHaibing
Fix sparse warnings: drivers/irqchip/irq-brcmstb-l2.c:278:12: warning: symbol 'brcmstb_l2_edge_intc_of_init' was not declared. Should it be static? drivers/irqchip/irq-brcmstb-l2.c:285:12: warning: symbol 'brcmstb_l2_lvl_intc_of_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21mmc: renesas_sdhi: limit block count to 16 bit for old revisionsWolfram Sang
R-Car Gen2 has two different SDHI incarnations in the same chip. The older one does not support the recently introduced 32 bit register access to the block count register. Make sure we use this feature only after the first known version. Thanks to the Renesas Testing team for this bug report! Fixes: 5603731a15ef ("mmc: tmio: fix access width of Block Count Register") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Phong Hoang <phong.hoang.wz@renesas.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-03-21mmc: alcor: fix DMA readsDaniel Drake
Setting max_blk_count to 1 here was causing the mmc block layer to always use the MMC_READ_SINGLE_BLOCK command here, which the driver does not DMA-accelerate. Drop the max_blk_ settings here. The mmc host defaults suffice, along with the max_segs and max_seg_size settings, which I have now documented in more detail. Now each MMC command reads 4 512-byte blocks, using DMA instead of PIO. On my SD card, this increases read performance (measured with dd) from 167kb/sec to 4.6mb/sec. Link: http://lkml.kernel.org/r/CAD8Lp47L5T3jnAjBiPs1cQ+yFA3L6LJtgFvMETnBrY63-Zdi2g@mail.gmail.com Signed-off-by: Daniel Drake <drake@endlessm.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-03-21mmc: sdhci-omap: Set caps2 to indicate no physical write protect pinKishon Vijay Abraham I
After commit 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") and commit 39ee32ce486756f ("mmc: sdhci-omap: drop ->get_ro() implementation"), sdhci-omap relied on SDHCI_PRESENT_STATE to check if the card is read-only, if wp-gpios is not populated in device tree. However SDHCI_PRESENT_STATE in sdhci-omap does not have correct read-only state. sdhci-omap can be used by platforms with both micro SD slot and standard SD slot with physical write protect pin (using GPIO). Set caps2 to MMC_CAP2_NO_WRITE_PROTECT based on if wp-gpios property is populated or not. This fix is required since existing device-tree node doesn't have "disable-wp" property and to preserve old-dt compatibility. Fixes: 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") Fixes: 39ee32ce486756f ("mmc: sdhci-omap: drop ->get_ro() implementation") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-03-21mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"Alexander Shiyan
This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-03-21drm/exynos/mixer: fix MIXER shadow registry synchronisation codeAndrzej Hajda
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-03-20scsi: ibmvscsi: Fix empty event pool access during host removalTyrel Datwyler
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaitonTyrel Datwyler
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()Luo Jiaxing
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmpRasmus Villemoes
The lpi_range_list is supposed to be sorted in ascending order of ->base_id (at least if the range merging is to work), but the current comparison function returns a positive value if rb->base_id > ra->base_id, which means that list_sort() will put A after B in that case - and vice versa, of course. Fixes: 880cb3cddd16 (irqchip/gic-v3-its: Refactor LPI allocator) Cc: stable@vger.kernel.org (v4.19+) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-20rbd: drop wait_for_latest_osdmap()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20drm/vmwgfx: Don't double-free the mode stored in par->set_modeThomas Zimmermann
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-03-20drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID'sDeepak Rawat
If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: <stable@vger.kernel.org> Fixes: 4eb085e42fde ("drm/vmwgfx: Convert to new IDA API") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit (git 2.34.1) at 2024-05-03 09:13:20 +0000