summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-06-26mlxsw: spectrum_switchdev: Ban PVID change if bridge has a RIFPetr Machata
When traffic passes through a router port, it needs to be assigned a FID for ASIC to forward correctly. For bridges, this FID used to be the one corresponding to VLAN 1. In a previous patch, this was changed to instead use the PVID at the time that the RIF is created. This patch guards PVID changes after the RIF was introduced. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26mlxsw: spectrum_router: Add mlxsw_sp_rif_fid()Petr Machata
In order to allow querying of the VID for which a RIF was created, add a new function that returns a FID for a given RIF. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26mlxsw: spectrum_router: Publish mlxsw_sp_rif_find_by_dev()Petr Machata
In order to guard against removal of a PVID for which a FID was allocated, spectrum_switchdev needs to first determine whether there is a RIF associated with a given bridge. To that end, publish a preexisting function mlxsw_sp_rif_find_by_dev(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26mlxsw: spectrum_router: Allocate FID according to PVIDPetr Machata
For bridge netdevices, instead of assuming that the router traffic is on VLAN 1, look at the bridge PVID. This patch assumes that the PVID doesn't change after the router interface is created (i.e. after the IP address is assigned). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26mlxsw: spectrum_router: Propagate extack to .fid_get()Petr Machata
In the follow-up patch, mlxsw_sp_rif_vlan_fid_get() will be changed in a way that could fail. Give that function a possibility to explain the failure through extack. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26r8152: napi hangup fix after disconnectJiri Slaby
When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'Christophe JAILLET
If 'platform_get_resource_byname()' fails, we should release some resources before leaving, as already done in the other error handling path of the function. Fixes: acaa3f13b8dd ("drm/meson: Fix potential NULL dereference in meson_drv_bind_master()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611165335.24542-1-christophe.jaillet@wanadoo.fr
2018-06-25qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependencyArnd Bergmann
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-26net: Convert GRO SKB handling to list_head.David Miller
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26usb: chipidea: host: fix disconnection detect issuePeter Chen
The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reported-by: Mats Karrman <mats.dev.list@gmail.com> Tested-by: Mats Karrman <mats.dev.list@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-06-26Merge tag 'iio-fixes-4.18a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.18 cycle. * bmp280 - Fix wrong relative humidity unit. * buffer - Fix a function signature to match the function. * inv_mpu6050 - Fix a regression in which older ACPI devices won't have working interrupts due to lack of information on the interrupt type. * mma8452 - Don't ignore data ready interrupt when handling interrupts as will look like an unhandled interrupt. * tsl2x7x/tsl2772 - Avoid a potential division by zero.
2018-06-26Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-06-25staging: android: ion: Return an ERR_PTR in ion_map_kernelLaura Abbott
The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by: Laura Abbott <labbott@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()Dan Carpenter
There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-enteredPeter Chen
The port->logbuffer_head may be wrong if the two processes enters _tcpm_log at the mostly same time. The 2nd process enters _tcpm_log before the 1st process update the index, then the 2nd process will not allocate logbuffer, when the 2nd process tries to use log buffer, the index has already updated by the 1st process, so it will get NULL pointer for updated logbuffer, the error message like below: tcpci 0-0050: Log buffer index 6 is NULL Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25typec: tcpm: Fix a msecs vs jiffies bugDan Carpenter
The tcpm_set_state() function take msecs not jiffies. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25NFC: pn533: Fix wrong GFP flag usageHans de Goede
pn533_recv_response() is an urb completion handler, so it must use GFP_ATOMIC. pn533_usb_send_frame() OTOH runs from a regular sleeping context, so the pn533_submit_urb_for_response() there (and only there) can use the regular GFP_KERNEL flags. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514134 Fixes: 9815c7cf22da ("NFC: pn533: Separate physical layer from ...") Cc: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: cdc_acm: Add quirk for Uniden UBC125 scannerHouston Yaroschoff
Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff <hstn@4ever3.net> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25staging/typec: fix tcpci_rt1711h build errorsRandy Dunlap
Fix Kconfig warning and build errors in staging/typec/rt1711h.c. The driver uses I2C interfaces so it should depend on I2C. WARNING: unmet direct dependencies detected for TYPEC_TCPCI Depends on [m]: STAGING [=y] && TYPEC_TCPM [=y] && I2C [=m] Selected by [y]: - TYPEC_RT1711H [=y] && STAGING [=y] && TYPEC_TCPM [=y] and then: drivers/staging/typec/tcpci.o: In function `tcpci_probe': ../drivers/staging/typec/tcpci.c:536: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_init': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_exit': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_del_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_check_revision': ../drivers/staging/typec/tcpci_rt1711h.c:218: undefined reference to `i2c_smbus_read_word_data' ../drivers/staging/typec/tcpci_rt1711h.c:225: undefined reference to `i2c_smbus_read_word_data' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_probe': ../drivers/staging/typec/tcpci_rt1711h.c:251: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_init': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_exit': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_del_driver' Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: ShuFan Lee <shufan_lee@richtek.com> Cc: kbuild-all@01.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: typec: ucsi: Fix for incorrect status data issueHeikki Krogerus
According to UCSI Specification, Connector Change Event only means a change in the Connector Status and Operation Mode fields of the STATUS data structure. So any other change should create another event. Unfortunately on some platforms the firmware acting as PPM (platform policy manager - usually embedded controller firmware) still does not report any other status changes if there is a connector change event. So if the connector power or data role was changed when a device was plugged to the connector, the driver does not get any indication about that. The port will show wrong roles if that happens. To fix the issue, always checking the data and power role together with a connector change event. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: typec: ucsi: acpi: Workaround for cache mode issueHeikki Krogerus
This fixes an issue where the driver fails with an error: ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0 On some platforms the UCSI ACPI mailbox SystemMemory Operation Region may be setup before the driver has been loaded. That will lead into the driver failing to map the mailbox region, as it has been already marked as write-back memory. acpi_os_ioremap() for x86 uses ioremap_cache() unconditionally. When the issue happens, the embedded controller has a pending query event for the UCSI notification right after boot-up which causes the operation region to be setup before UCSI driver has been loaded. The fix is to notify acpi core that the driver is about to access memory region which potentially overlaps with an operation region right before mapping it. acpi_release_memory() will check if the memory has already been setup (mapped) by acpi core, and deactivate it (unmap) if it has. The driver is then able to map the memory with ioremap_nocache() and set the memtype to uncached for the region. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25acpi: Add helper for deactivating memory regionHeikki Krogerus
Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: xhci: increase CRS timeout valueAjay Gupta
Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta <ajaykuee@gmail.com> Signed-off-by: Nagaraj Annaiah <naga.annaiah@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: xhci: tegra: fix runtime PM error handlingStefan Agner
The address-of operator will always evaluate to true. However, power should be explicitly disabled if no power domain is used. Remove the address-of operator. Fixes: 58c38116c6cc ("usb: xhci: tegra: Add support for managing powergates") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25usb: xhci: remove the code build warningDongjiu Geng
Initialize the 'err' variate to remove the build warning, the warning is shown as below: drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread': drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here Fixes: e84fce0f8837 ("usb: xhci: Add NVIDIA Tegra XUSB controller driver") Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25xhci: Fix kernel oops in trace_xhci_free_virt_deviceZhengjun Xing
commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25xhci: Fix perceived dead host due to runtime suspend race with event handlerMathias Nyman
Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25Merge tag 'fixes-for-v4.18-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v4.18-rc1 First set of fixes for the current -rc cycle. The main parts being warnings of different kinds being fixed. We're also adding support for Intel'l Icelake devices on dwc3-pci.c.
2018-06-25nfp: bpf: don't stop offload if replace failedJakub Kicinski
Stopping offload completely if replace of program failed dates back to days of transparent offload. Back then we wanted to silently fall back to the in-driver processing. Today we mark programs for offload when they are loaded into the kernel, so the transparent offload is no longer a reality. Flags check in the driver will only allow replace of a driver program with another driver program or an offload program with another offload program. When driver program is replaced stopping offload is a no-op, because driver program isn't offloaded. When replacing offloaded program if the offload fails the entire operation will fail all the way back to user space and we should continue using the old program. IOW when replacing a driver program stopping offload is unnecessary and when replacing offloaded program - it's a bug, old program should continue to run. In practice this bug would mean that if offload operation was to fail (either due to FW communication error, kernel OOM or new program being offloaded but for a different netdev) driver would continue reporting that previous XDP program is offloaded but in fact no program will be loaded in hardware. The failure is fairly unlikely (found by inspection, when working on the code) but it's unpleasant. Backport note: even though the bug was introduced in commit cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"), this fix depends on commit 441a33031fe5 ("net: xdp: don't allow device-bound programs in driver mode"), so this fix is sufficient only in v4.15 or newer. Kernels v4.13.x and v4.14.x do need to stop offload if it was transparent/opportunistic, i.e. if XDP_FLAGS_HW_MODE was not set on running program. Fixes: cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix netpoll OOPS in r8169, from Ville Syrjälä. 2) Fix bpf instruction alignment on powerpc et al., from Eric Dumazet. 3) Don't ignore IFLA_MTU attribute when creating new ipvlan links. From Xin Long. 4) Fix use after free in AF_PACKET, from Eric Dumazet. 5) Mis-matched RTNL unlock in xen-netfront, from Ross Lagerwall. 6) Fix VSOCK loopback on big-endian, from Claudio Imbrenda. 7) Missing RX buffer offset correction when computing DMA addresses in mvneta driver, from Antoine Tenart. 8) Fix crashes in DCCP's ccid3_hc_rx_send_feedback, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) sfc: make function efx_rps_hash_bucket static strparser: Corrected typo in documentation. qmi_wwan: add support for the Dell Wireless 5821e module cxgb4: when disabling dcb set txq dcb priority to 0 net_sched: remove a bogus warning in hfsc net: dccp: switch rx_tstamp_last_feedback to monotonic clock net: dccp: avoid crash in ccid3_hc_rx_send_feedback() net: Remove depends on HAS_DMA in case of platform dependency MAINTAINERS: Add file patterns for dsa device tree bindings net: mscc: make sparse happy net: mvneta: fix the Rx desc DMA address in the Rx path Documentation: e1000: Fix docs build error Documentation: e100: Fix docs build error Documentation: e1000: Use correct heading adornment Documentation: e100: Use correct heading adornment ipv6: mcast: fix unsolicited report interval after receiving querys vhost_net: validate sock before trying to put its fd VSOCK: fix loopback on big-endian systems net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create static xen-netfront: Update features after registering netdev ...
2018-06-25PM / Domains: Rename opp_node to npViresh Kumar
The DT node passed here isn't necessarily an OPP node, as this routine can also be used for cases where the "required-opps" property is present directly in the device's node. Rename it. This also removes a stale comment. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-25r8169: don't check WoL when powering down PHY and interface is downHeiner Kallweit
We can power down the PHY irregardless of WOL settings if interface is down. So far we would have left the PHY enabled if WOL options are set and the interface is brought down. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25r8169: improve saved_wolopts handlingHeiner Kallweit
Let's make saved_wolopts a shadow copy of the WoL options. This allows to simplify the code and get rid of calls to now unneeded function __rtl8169_get_wol(). However don't remove __rtl8169_get_wol() completely to be prepared for the case that we can respect BIOS WOL settings again. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25r8169: improve phy initialization when resumingHeiner Kallweit
Let's move calling rtl8169_init_phy() to __rtl8169_resume(). It simplifies the code and avoids rtl8169_init_phy() being called when resuming whilst interface is down. rtl_open() will initialize the PHY when the interface is brought up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25cls_flower: fix error values for commands not supported by driversJiri Pirko
-EOPNOTSUPP is the error value that should be reported if a flower command is not supported by a driver. Fix it in couple of Intel drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25nfp: handle cls_flower command default caseJiri Pirko
Currently the default case is not handled, which with future command introductions would introduce a warning. So handle it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25bnxt: simplify cls_flower command switch and handle default caseJiri Pirko
Currently the default case is not handled, which with future command introductions would introduce a warning. So handle it and make the switch a bit simplier removing unneeded "rc" variable. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24cpufreq: qcom-kryo: Fix error handling in probe()Dan Carpenter
We should return if get_cpu_device() fails or it leads to a NULL dereference. Also dev_pm_opp_of_get_opp_desc_node() returns NULL on error, it never returns error pointers. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-24sfc: make function efx_rps_hash_bucket staticColin Ian King
The function efx_rps_hash_bucket is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'efx_rps_hash_bucket' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machinesHans de Goede
Commit 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") causes inv_mpu_core_probe() to fail if the IRQ does not have a trigger-type setup. This happens on machines where the mpu6050 is enumerated through ACPI and an older Interrupt type ACPI resource is used for the interrupt, rather then a GpioInt type type, causing the mpu6050 driver to no longer work there. This happens on e.g. the Asus T100TA. This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING default if the irq-type is not setup, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Fixes: 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly <mkelly@xevo.com> Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24iio: mma8452: Fix ignoring MMA8452_INT_DRDYLeonard Crestez
Interrupts are ignored if no event bit is set in the status status register and this breaks the buffer interface. No data is shown when running "iio_generic_buffer -n mma8451 -a" and interrupt counts go crazy. Fix by not returning IRQ_NONE if DRDY is set. Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle multiple events") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24iio: tsl2x7x/tsl2772: avoid potential division by zeroColin Ian King
It may be possible for tsl2772_get_lux to return a zero lux value and hence a division by zero can occur when lux_val is zero. Check for this case and return -ERANGE to avoid the division by zero. Detected by CoverityScan, CID#1469484 ("Division or modulo by zero") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24iio: pressure: bmp280: fix relative humidity unitTomasz Duszynski
According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Two fixlets for the EFI maze: - Properly zero variables to prevent an early boot hang on EFI mixed mode systems - Fix the fallout of merging the 32bit and 64bit variants of EFI PCI related code which ended up chosing the 32bit variant of the actual EFi call invocation which leads to failures on 64bit" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix incorrect invocation of PciIo->Attributes() efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode
2018-06-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes for time(r) related issues: - Fix a long standing conversion issue in jiffies_to_msecs() for odd HZ values like 1024 or 1200 which resulted in returning 0 for small jiffies values due to rounding down. - Use the proper CONFIG symbol in the new Y2038 safe compat code for posix-timers. Not yet a visible breakage, but this will immediately trigger when the architecture support for the new interfaces is merged. - Return an error code in the STM32 clocksource driver on failure instead of success. - Remove the redundant and stale irq disabled check in the posix cpu timer code. The check is at the wrong place anyway and lockdep already covers it via the sighand lock locking coverage" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Make sure jiffies_to_msecs() preserves non-zero time periods posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME clocksource/drivers/stm32: Fix error return code posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
2018-06-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes mostly for the ARM/GIC world: - Fix the MSI affinity handling in the ls-scfg irq chip driver so it updates and uses the effective affinity mask correctly - Prevent binding LPIs to offline CPUs and respect the Cavium erratum which requires that LPIs which belong to an offline NUMA node are not bound to a CPU on a different NUMA node. - Free only the amount of allocated interrupts in the GIC-V2M driver instead of trying to free log2(nrirqs). - Prevent emitting SYNC and VSYNC targetting non existing interrupt collections in the GIC-V3 ITS driver - Ensure that the GIV-V3 interrupt redistributor is correctly reprogrammed on CPU hotplug - Remove a stale unused helper function" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdesc: Delete irq_desc_get_msi_desc() irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node irqchip/gic-v2m: Fix SPI release on error path irqchip/ls-scfg-msi: Fix MSI affinity handling genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
2018-06-24net: phy: fixed-phy: Make the error path simplerFabio Estevam
When platform_device_register_simple() fails we can return the error immediately instead of jumping to the 'err_pdev' label. This makes the error path a bit simpler. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24qmi_wwan: add support for the Dell Wireless 5821e moduleAleksander Morgado
This module exposes two USB configurations: a QMI+AT capable setup on USB config #1 and a MBIM capable setup on USB config #2. By default the kernel will choose the MBIM capable configuration as long as the cdc_mbim driver is available. This patch adds support for the QMI port in the secondary configuration. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24cxgb4: when disabling dcb set txq dcb priority to 0Ganesh Goudar
When we are disabling DCB, store "0" in txq->dcb_prio since that's used for future TX Work Request "OVLAN_IDX" values. Setting non zero priority upon disabling DCB would halt the traffic. Reported-by: AMG Zollner Robert <robert@cloudmedia.eu> CC: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24Merge tag 'for-linus-20180623' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Further timeout fixes. We aren't quite there yet, so expect another round of fixes for that to completely close some of the IRQ vs completion races. (Christoph/Bart) - Set of NVMe fixes from the usual suspects, mostly error handling - Two off-by-one fixes (Dan) - Another bdi race fix (Jan) - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron) * tag 'for-linus-20180623' of git://git.kernel.dk/linux-block: blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE bdi: Fix another oops in wb_workfn() lightnvm: Remove depends on HAS_DMA in case of platform dependency nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag. block: sed-opal: Fix a couple off by one bugs blk-mq-debugfs: Off by one in blk_mq_rq_state_name() nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller Revert "block: Add warning for bi_next not NULL in bio_endio()" block: fix timeout changes for legacy request drivers
generated by cgit (git 2.34.1) at 2025-09-20 12:04:30 +0000