summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-10drm/i915/fbc: Disable fbc by default on all glk+Ville Syrjälä
We're missing a workaround in the fbc code for all glk+ platforms which can cause corruption around the top of the screen. So enabling fbc by default is a bad idea. I'm not keen to backport the w/a so let's start by disabling fbc by default on all glk+. We'll lift the restriction once the w/a is in place. Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jian-Hong Pan <jian-hong@endlessm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit cd8c021b36a66833cefe2c90a79a9e312a2a5690) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/perf: Configure OAR for specific contextUmesh Nerlige Ramappa
Gen12 supports saving/restoring render counters per context. Apply OAR configuration only for the context that is passed in to perf. v2: - Fix OACTXCONTROL value to only stop/resume counters. - Remove gen12_update_reg_state_unlocked as power state is already applied by the caller. v3: (Lionel) - Move register initialization into the array - Assume a valid oa_config in enable_metric_set Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit ccdeed497042676e13fc1625e2a341880eff5da5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10drm/i915/perf: Allow non-privileged access when OA buffer is not sampledUmesh Nerlige Ramappa
SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer. Since reports from OA buffer had system wide visibility, collecting samples from the OA buffer was a privileged operation on previous platforms. Prior to TGL, it was also necessary to sample the OA buffer to normalize reports from MI REPORT PERF COUNT. TGL has a dedicated OAR unit to sample perf reports for a specific render context. This removes the necessity to sample OA buffer. - If not sampling the OA buffer, allow non-privileged access. An earlier patch allows the non-privilege access: https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1 - Clear up the path for non-privileged access in this patch Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 322d56aa3145a28445907ecc638a2c3aa3295c6b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-10staging: gigaset: add endpoint-type sanity checkJohan Hovold
Add missing endpoint-type sanity checks to probe. This specifically prevents a warning in USB core on URB submission when fuzzing USB descriptors. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191202085610.12719-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: gigaset: fix illegal free on probe errorsJohan Hovold
The driver failed to initialise its receive-buffer pointer, something which could lead to an illegal free on late probe errors. Fix this by making sure to clear all driver data at allocation. Fixes: 2032e2c2309d ("usb_gigaset: code cleanup") Cc: stable <stable@vger.kernel.org> # 2.6.33 Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191202085610.12719-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: gigaset: fix general protection fault on probeJohan Hovold
Fix a general protection fault when accessing the endpoint descriptors which could be triggered by a malicious device due to missing sanity checks on the number of endpoints. Reported-by: syzbot+35b1c403a14f5c89eba7@syzkaller.appspotmail.com Fixes: 07dc1f9f2f80 ("[PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapter") Cc: stable <stable@vger.kernel.org> # 2.6.17 Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191202085610.12719-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: vchiq: call unregister_chrdev_region() when driver registration failsMarcelo Diop-Gonzalez
This undoes the previous call to alloc_chrdev_region() on failure, and is probably what was meant originally given the label name. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Cc: stable <stable@vger.kernel.org> Fixes: 187ac53e590c ("staging: vchiq_arm: rework probe and init functions") Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191203153921.70540-1-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: exfat: fix multiple definition error of `rename_file'Brendan Higgins
`rename_file' was exported but not properly namespaced causing a multiple definition error because `rename_file' is already defined in fs/hostfs/hostfs_user.c: ld: drivers/staging/exfat/exfat_core.o: in function `rename_file': drivers/staging/exfat/exfat_core.c:2327: multiple definition of `rename_file'; fs/hostfs/hostfs_user.o:fs/hostfs/hostfs_user.c:350: first defined here make: *** [Makefile:1077: vmlinux] Error 1 This error can be reproduced on ARCH=um by selecting: CONFIG_EXFAT_FS=y CONFIG_HOSTFS=y Add a namespace prefix exfat_* to fix this error. Reported-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Cc: stable <stable@vger.kernel.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by: David Gow <davidgow@google.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20191204234522.42855-1-brendanhiggins@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging/wlan-ng: add CRC32 dependency in KconfigKay Friedrich
wlan-ng uses the function crc32_le, but CRC32 wasn't a dependency of wlan-ng Co-developed-by: Michael Kupfer <michael.kupfer@fau.de> Signed-off-by: Michael Kupfer <michael.kupfer@fau.de> Signed-off-by: Kay Friedrich <kay.friedrich@fau.de> Link: https://lore.kernel.org/r/20191127112457.2301-1-kay.friedrich@fau.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: hp100: Fix build error without ETHERNETYueHaibing
It should depends on ETHERNET, otherwise building fails: drivers/staging/hp/hp100.o: In function `hp100_pci_remove': hp100.c:(.text+0x165): undefined reference to `unregister_netdev' hp100.c:(.text+0x214): undefined reference to `free_netdev' Fixes: 52340b82cf1a ("hp100: Move 100BaseVG AnyLAN driver to staging") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20191113021306.35464-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: fbtft: Do not hardcode SPI CS polarity inversionLinus Walleij
The current use of the mode flag SPI_CS_HIGH is fragile: it overwrites anything already assigned by the SPI core. Assign ^= SPI_CS_HIGH since we might be active high already, and that is usually the case with GPIOs used for chip select, even if they are in practice active low. Add a comment clarifying why ^= SPI_CS_HIGH is the right choice here. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191204233230.22309-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging: exfat: properly support discard in clr_alloc_bitmap()Andrea Righi
Currently the discard code in clr_alloc_bitmap() is just dead code. Move code around so that the discard operation is properly attempted when enabled. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Link: https://lore.kernel.org/r/20191205152913.GJ3276@xps-13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10staging/octeon: Mark Ethernet driver as BROKENGuenter Roeck
The code doesn't compile due to incompatible pointer errors such as drivers/staging/octeon/ethernet-tx.c:649:50: error: passing argument 1 of 'cvmx_wqe_get_grp' from incompatible pointer type This is due to mixing, for example, cvmx_wqe_t with 'struct cvmx_wqe'. Unfortunately, one can not just revert the primary offending commit, as doing so results in secondary errors. This is made worse by the fact that the "removed" typedefs still exist and are used widely outside the staging directory, making the entire set of "remove typedef" changes pointless and wrong. Reflect reality and mark the driver as BROKEN. Fixes: ef1fe6b7369a ("staging: octeon: remove typedef declaration for cvmx_wqe") Fixes: 73aef0c9d2c6 ("staging: octeon: remove typedef declaration for cvmx_helper_link_info") Cc: Wambui Karuga <wambui.karugax@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191202141836.9363-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-09scsi: iscsi: Avoid potential deadlock in iscsi_if_rx funcBo Wu
In iscsi_if_rx func, after receiving one request through iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to reply to the request in a do-while loop. If the iscsi_if_send_reply function keeps returning -EAGAIN, a deadlock will occur. For example, a client only send msg without calling recvmsg func, then it will result in the watchdog soft lockup. The details are given as follows: sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI); retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr); while (1) { state_msg = sendmsg(sock_fd, &msg, 0); //Note: recvmsg(sock_fd, &msg, 0) is not processed here. } close(sock_fd); watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat: curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0 deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq: TIMER: 992 SCHED: 8 Sample irqstat: irq 2: delta 1003, curr: 3103802, arch_timer CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO) pc : __alloc_skb+0x104/0x1b0 lr : __alloc_skb+0x9c/0x1b0 sp : ffff000033603a30 x29: ffff000033603a30 x28: 00000000000002dd x27: ffff800b34ced810 x26: ffff800ba7569f00 x25: 00000000ffffffff x24: 0000000000000000 x23: ffff800f7c43f600 x22: 0000000000480020 x21: ffff0000091d9000 x20: ffff800b34eff200 x19: ffff800ba7569f00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0001000101000100 x13: 0000000101010000 x12: 0101000001010100 x11: 0001010101010001 x10: 00000000000002dd x9 : ffff000033603d58 x8 : ffff800b34eff400 x7 : ffff800ba7569200 x6 : ffff800b34eff400 x5 : 0000000000000000 x4 : 00000000ffffffff x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace: __alloc_skb+0x104/0x1b0 iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi] netlink_unicast+0x1e0/0x258 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 sock_write_iter+0x90/0xf0 __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.com Signed-off-by: Bo Wu <wubo40@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: iscsi: Fix a potential deadlock in the timeout handlerBart Van Assche
Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); <Interrupt> lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: libsas: stop discovering if oob mode is disconnectedJason Yan
The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com Reported-by: Gao Chuan <gaochuan4@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: ufs: Disable autohibern8 feature in Cadence UFSsheebab
This patch disables autohibern8 feature in Cadence UFS. The autohibern8 feature has issues due to which unexpected interrupt trigger is happening. After the interrupt issue is sorted out, autohibern8 feature will be re-enabled Link: https://lore.kernel.org/r/1575367635-22662-1-git-send-email-sheebab@cadence.com Cc: <stable@vger.kernel.org> Signed-off-by: sheebab <sheebab@cadence.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: iscsi: qla4xxx: fix double free in probeDan Carpenter
On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: ufs: Give an unique ID to each ufs-bsgCan Guo
Considering there can be multiple UFS hosts in SoC, give each ufs-bsg an unique ID by appending the scsi host number to its device name. Link: https://lore.kernel.org/r/0101016eca8dc9d7-d24468d3-04d2-4ef3-a906-abe8b8cbcd3d-000000@us-west-2.amazonses.com Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Signed-off-by: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCBRoman Bolshakov
The change adds a way to debug LOGO ELS, likewise PLOGI. Link: https://lore.kernel.org/r/20191125165702.1013-14-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Acked-by: Quinn Tran <qutran@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGIRoman Bolshakov
PORT UPDATE asynchronous event is generated on the host that issues PLOGI ELS (in the case of higher WWPN). In that case, the event shouldn't be handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that trigger link flap. Ignore the event if the host has higher WWPN, but handle otherwise. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-13-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Don't defer relogin unconditonallyRoman Bolshakov
qla2x00_configure_local_loop sets RELOGIN_NEEDED bit and calls qla24xx_fcport_handle_login to perform the login. This bit triggers a wake up of DPC later after a successful login. The deferred call is not needed if login succeeds, and it's set in qla24xx_fcport_handle_login in case of errors, hence it should be safe to drop. Link: https://lore.kernel.org/r/20191125165702.1013-12-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Acked-by: Quinn Tran <qutran@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Send Notify ACK after N2N PLOGIRoman Bolshakov
qlt_handle_login schedules session for deletion even if a login is in progress. That causes login bouncing, i.e. a few logins are made before it settles down. Complete the first login by sending Notify Acknowledge IOCB via qlt_plogi_ack_unref if the session is pending login completion. Fixes: 9cd883f07a54 ("scsi: qla2xxx: Fix session cleanup for N2N") Cc: Krishna Kant <krishna.kant@purestorage.com> Cc: Alexei Potashnik <alexei@purestorage.com> Link: https://lore.kernel.org/r/20191125165702.1013-11-r.bolshakov@yadro.com Acked-by: Quinn Tran <qutran@marvell.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Configure local loop for N2N targetRoman Bolshakov
qla2x00_configure_local_loop initializes PLOGI payload for PLOGI ELS using Get Parameters mailbox command. In the case when the driver is running in target mode, the topology is N2N and the target port has higher WWPN, LOCAL_LOOP_UPDATE bit is cleared too early and PLOGI payload is not initialized by the Get Parameters command. That causes a failure of ELS IOCB carrying the PLOGI with 0x15 aka Data Underrun error. LOCAL_LOOP_UPDATE has to be set to initialize PLOGI payload. Fixes: 48acad099074 ("scsi: qla2xxx: Fix N2N link re-connect") Link: https://lore.kernel.org/r/20191125165702.1013-10-r.bolshakov@yadro.com Acked-by: Quinn Tran <qutran@marvell.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump lengthRoman Bolshakov
The size of the buffer is hardcoded as 0x70 or 112 bytes, while the size of ELS IOCB is 0x40 and the size of PLOGI payload returned by Get Parameters command is 0x74. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-9-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Don't call qlt_async_event twiceRoman Bolshakov
MBA_PORT_UPDATE generates duplicate log lines in target mode because qlt_async_event is called twice. Drop the calls within the case as the function will be called right after the switch statement. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Allow PLOGI in target modeRoman Bolshakov
According to FC-LS-3 (Fibre Channel Link Services) 6.3.2.4 "N_Port Login - No Fabric present", if both parties in the point-to-point connection know N_Port_Names of each other, Nx_Port with the highest N_Port_name shall transmit PLOGI. The specification sets no restrictions on the port role that should send PLOGI. However, FCP-4 (Fibre Channel Protocol for SCSI, Fourth Version) 6.2 "Overview of Process Login and Process Logout", instructs that in point-to-point topology, initiator shall send explicit PRLI ELS. The change fixes stuck P2P login, when target WWPN is higher than initiator WWPN. Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-7-r.bolshakov@yadro.com Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Change discovery state before PLOGIRoman Bolshakov
When a port sends PLOGI, discovery state should be changed to login pending, otherwise RELOGIN_NEEDED bit is set in qla24xx_handle_plogi_done_event(). RELOGIN_NEEDED triggers another PLOGI, and it never goes out of the loop until login timer expires. Fixes: 8777e4314d397 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Fixes: 8b5292bcfcacf ("scsi: qla2xxx: Fix Relogin to prevent modifying scan_state flag") Cc: Quinn Tran <qutran@marvell.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191125165702.1013-6-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Drop superfluous INIT_WORK of del_workRoman Bolshakov
del_work is already initialized inside qla2x00_alloc_fcport, there's no need to overwrite it. Indeed, it might prevent complete traversal of workqueue list. Fixes: a01c77d2cbc45 ("scsi: qla2xxx: Move session delete to driver work queue") Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-5-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Initialize free_work before flushing itRoman Bolshakov
Target creation triggers a new BUG_ON introduced in in commit 4d43d395fed1 ("workqueue: Try to catch flush_work() without INIT_WORK()."). The BUG_ON reveals an attempt to flush free_work in qla24xx_do_nack_work before it's initialized in qlt_unreg_sess: WARNING: CPU: 7 PID: 211 at kernel/workqueue.c:3031 __flush_work.isra.38+0x40/0x2e0 CPU: 7 PID: 211 Comm: kworker/7:1 Kdump: loaded Tainted: G E 5.3.0-rc7-vanilla+ #2 Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx] NIP: c000000000159620 LR: c0080000009d91b0 CTR: c0000000001598c0 REGS: c000000005f3f730 TRAP: 0700 Tainted: G E (5.3.0-rc7-vanilla+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002222 XER: 00000000 CFAR: c0000000001598d0 IRQMASK: 0 GPR00: c0080000009d91b0 c000000005f3f9c0 c000000001670a00 c0000003f8655ca8 GPR04: c0000003f8655c00 000000000000ffff 0000000000000011 ffffffffffffffff GPR08: c008000000949228 0000000000000000 0000000000000001 c0080000009e7780 GPR12: 0000000000002200 c00000003fff6200 c000000000161bc8 0000000000000004 GPR16: c0000003f9d68280 0000000002000000 0000000000000005 0000000000000003 GPR20: 0000000000000002 000000000000ffff 0000000000000000 fffffffffffffef7 GPR24: c000000004f73848 c000000004f73838 c000000004f73f28 c000000005f3fb60 GPR28: c000000004f73e48 c000000004f73c80 c000000004f73818 c0000003f9d68280 NIP [c000000000159620] __flush_work.isra.38+0x40/0x2e0 LR [c0080000009d91b0] qla24xx_do_nack_work+0x88/0x180 [qla2xxx] Call Trace: [c000000005f3f9c0] [c000000000159644] __flush_work.isra.38+0x64/0x2e0 (unreliable) [c000000005f3fa50] [c0080000009d91a0] qla24xx_do_nack_work+0x78/0x180 [qla2xxx] [c000000005f3fae0] [c0080000009496ec] qla2x00_do_work+0x604/0xb90 [qla2xxx] [c000000005f3fc40] [c008000000949cd8] qla2x00_iocb_work_fn+0x60/0xe0 [qla2xxx] [c000000005f3fc80] [c000000000157bb8] process_one_work+0x2c8/0x5b0 [c000000005f3fd10] [c000000000157f28] worker_thread+0x88/0x660 [c000000005f3fdb0] [c000000000161d64] kthread+0x1a4/0x1b0 [c000000005f3fe20] [c00000000000b960] ret_from_kernel_thread+0x5c/0x7c Instruction dump: 3d22001d 892966b1 7d908026 91810008 f821ff71 69290001 0b090000 2e290000 40920200 e9230018 7d2a0074 794ad182 <0b0a0000> 2fa90000 419e01e8 7c0802a6 ---[ end trace 5ccf335d4f90fcb8 ]--- Fixes: 1021f0bc2f3d6 ("scsi: qla2xxx: allow session delete to finish before create.") Cc: Quinn Tran <qutran@marvell.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191125165702.1013-4-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Use explicit LOGO in target modeQuinn Tran
Target makes implicit LOGO on session teardown. LOGO ELS is not send on the wire and initiator is not aware that target no longer wants talking to it. Initiator keeps sending I/O requests, target responds with BA_RJT, they time out and then initiator sends ABORT TASK (ABTS-LS). Current behaviour incurs unneeded I/O timeout and can be fixed for some initiators by making explicit LOGO on session deletion. Link: https://lore.kernel.org/r/20191125165702.1013-3-r.bolshakov@yadro.com Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmdRoman Bolshakov
If ABTS cannot be completed in target mode, the driver attempts to free related management command and crashes: NIP [d000000019181ee8] tcm_qla2xxx_free_mcmd+0x40/0x80 [tcm_qla2xxx] LR [d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx] Call Trace: [c000003fff27bb50] [c000003fff27bc10] 0xc000003fff27bc10 (unreliable) [c000003fff27bb70] [d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx] [c000003fff27bc10] [d00000001dbc2be0] qla24xx_process_response_queue+0x5d8/0xbd0 [qla2xxx] [c000003fff27bd50] [d00000001dbc632c] qla24xx_msix_rsp_q+0x64/0x150 [qla2xxx] [c000003fff27bde0] [c000000000187200] __handle_irq_event_percpu+0x90/0x310 [c000003fff27bea0] [c0000000001874b8] handle_irq_event_percpu+0x38/0x90 [c000003fff27bee0] [c000000000187574] handle_irq_event+0x64/0xb0 [c000003fff27bf10] [c00000000018cd38] handle_fasteoi_irq+0xe8/0x280 [c000003fff27bf40] [c000000000185ccc] generic_handle_irq+0x4c/0x70 [c000003fff27bf60] [c000000000016cec] __do_irq+0x7c/0x1d0 [c000003fff27bf90] [c00000000002a530] call_do_irq+0x14/0x24 [c00000207d2cba90] [c000000000016edc] do_IRQ+0x9c/0x130 [c00000207d2cbae0] [c000000000008bf4] hardware_interrupt_common+0x114/0x120 --- interrupt: 501 at arch_local_irq_restore+0x74/0x90 LR = arch_local_irq_restore+0x74/0x90 [c00000207d2cbdd0] [c0000000001c64fc] tick_broadcast_oneshot_control+0x4c/0x60 (unreliable) [c00000207d2cbdf0] [c0000000007ac840] cpuidle_enter_state+0xf0/0x450 [c00000207d2cbe50] [c00000000016b81c] call_cpuidle+0x4c/0x90 [c00000207d2cbe70] [c00000000016bc30] do_idle+0x2b0/0x330 [c00000207d2cbec0] [c00000000016beec] cpu_startup_entry+0x3c/0x50 [c00000207d2cbef0] [c00000000004a06c] start_secondary+0x63c/0x670 [c00000207d2cbf90] [c00000000000aa6c] start_secondary_prolog+0x10/0x14 The crash can be triggered by ACL deletion when there's active I/O. During ACL deletion, qla2xxx performs implicit LOGO that's invisible for the initiator. Only the driver and firmware are aware of the logout. Therefore the initiator continues to send SCSI commands and the target always responds with SAM STATUS BUSY as it can't find the session. The command times out after a while and initiator invokes ABORT TASK TMF for the command. The TMF is mapped to ABTS-LS in FCP. The target can't find session for S_ID originating ABTS-LS so it never allocates mcmd. And since N_Port handle was deleted after LOGO, it is no longer valid and ABTS Response IOCB is returned from firmware with status 31. Then free_mcmd is invoked on NULL pointer and the kernel crashes. [ 7734.578642] qla2xxx [0000:00:0c.0]-e837:6: ABTS_RECV_24XX: instance 0 [ 7734.578644] qla2xxx [0000:00:0c.0]-f811:6: qla_target(0): task abort (s_id=1:2:0, tag=1209504, param=0) [ 7734.578645] find_sess_by_s_id: 0x010200 [ 7734.578645] Unable to locate s_id: 0x010200 [ 7734.578646] qla2xxx [0000:00:0c.0]-f812:6: qla_target(0): task abort for non-existent session [ 7734.578648] qla2xxx [0000:00:0c.0]-e806:6: Sending task mgmt ABTS response (ha=c0000000d5819000, atio=c0000000d3fd4700, status=4 [ 7734.578730] qla2xxx [0000:00:0c.0]-e838:6: ABTS_RESP_24XX: compl_status 31 [ 7734.578732] qla2xxx [0000:00:0c.0]-e863:6: qla_target(0): ABTS_RESP_24XX failed 31 (subcode 19:a) [ 7734.578740] Unable to handle kernel paging request for data at address 0x00000200 Fixes: 6b0431d6fa20b ("scsi: qla2xxx: Fix out of order Termination and ABTS response") Cc: Quinn Tran <qutran@marvell.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Thomas Abraham <tabraham@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191125165702.1013-2-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-10ACPI: PM: Avoid attaching ACPI PM domain to certain devicesRafael J. Wysocki
Certain ACPI-enumerated devices represented as platform devices in Linux, like fans, require special low-level power management handling implemented by their drivers that is not in agreement with the ACPI PM domain behavior. That leads to problems with managing ACPI fans during system-wide suspend and resume. For this reason, make acpi_dev_pm_attach() skip the affected devices by adding a list of device IDs to avoid to it and putting the IDs of the affected devices into that list. Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-09scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set funcBo Wu
When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf, dd_data should be freed before return SLI_CONFIG_HANDLED. When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in job_error tag. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.com Signed-off-by: Bo Wu <wubo40@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Fix incorrect SFUB length used for Secure Flash Update MB CmdMichael Hernandez
SFUB length should be in DWORDs when passed to FW. Fixes: 3f006ac342c03 ("scsi: qla2xxx: Secure flash update support for ISP28XX") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191203223657.22109-4-hmadhani@marvell.com Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Added support for MPI and PEP regions for ISP28XXMichael Hernandez
This patch adds support for MPI/PEP region updates which is required with secure flash updates for ISP28XX. Fixes: 3f006ac342c0 ("scsi: qla2xxx: Secure flash update support for ISP28XX") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191203223657.22109-3-hmadhani@marvell.com Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Correctly retrieve and interpret active flash regionHimanshu Madhani
ISP27XX/28XX supports multiple flash regions. This patch fixes issue where active flash region was not interpreted correctly during secure flash update process. [mkp: typo] Fixes: 5fa8774c7f38c ("scsi: qla2xxx: Add 28xx flash primary/secondary status/image mechanism") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191203223657.22109-2-hmadhani@marvell.com Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09Merge tag 'thermal-5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Zhang Rui: "Starting from this release cycle, we have Daniel Lezcano work as the new thermal co-maintainer because Eduardo's email is bouncing for sometime and we can not reach him. We also have a new shared git tree so that both Daniel and I can actively working on it. Specifics: - Update MAINTAINER file for new thermal co-maintainer and new thermal git tree address. (Daniel Lezcano, Florian Fainelli, Zhang Rui) - Fix a Kconfig warning. (YueHaibing)" * tag 'thermal-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: MAINTAINERS: thermal: Change the git tree location MAINTAINERS: thermal: Add Daniel Lezcano as the thermal maintainer MAINTAINERS: thermal: Eduardo's email is bouncing thermal: power_allocator: Fix Kconfig warning
2019-12-09rxe: correctly calculate iCRC for unaligned payloadsSteve Wise
If RoCE PDUs being sent or received contain pad bytes, then the iCRC is miscalculated, resulting in PDUs being emitted by RXE with an incorrect iCRC, as well as ingress PDUs being dropped due to erroneously detecting a bad iCRC in the PDU. The fix is to include the pad bytes, if any, in iCRC computations. Note: This bug has caused broken on-the-wire compatibility with actual hardware RoCE devices since the soft-RoCE driver was first put into the mainstream kernel. Fixing it will create an incompatibility with the original soft-RoCE devices, but is necessary to be compatible with real hardware devices. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09RDMA/cma: add missed unregister_pernet_subsys in init failureChuhong Yuan
The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-09drm/i915/gt: Save irqstate around virtual_context_destroyChris Wilson
As virtual_context_destroy() may be called from a request signal, it may be called from inside an irq-off section, and so we need to do a full save/restore of the irq state rather than blindly re-enable irqs upon unlocking. <4> [110.024262] WARNING: inconsistent lock state <4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U <4> [110.024292] -------------------------------- <4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes: <4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.024592] {IN-HARDIRQ-W} state was registered at: <4> [110.024612] lock_acquire+0xa7/0x1c0 <4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50 <4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915] <4> [110.024808] irq_work_run_list+0x49/0x70 <4> [110.024824] irq_work_run+0x26/0x50 <4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0 <4> [110.024855] irq_work_interrupt+0xf/0x20 <4> [110.024871] __do_softirq+0xb7/0x47f <4> [110.024885] irq_exit+0xba/0xc0 <4> [110.024898] do_IRQ+0x83/0x160 <4> [110.024910] ret_from_intr+0x0/0x1d <4> [110.024922] irq event stamp: 172864 <4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50 <4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40 <4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f <4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0 <4> [110.025031] other info that might help us debug this: <4> [110.025049] Possible unsafe locking scenario: <4> [110.025065] CPU0 <4> [110.025075] ---- <4> [110.025084] lock(&(&rq->lock)->rlock); <4> [110.025099] <Interrupt> <4> [110.025109] lock(&(&rq->lock)->rlock); <4> [110.025124] *** DEADLOCK *** <4> [110.025144] 4 locks held by kworker/0:0/5: <4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915] <4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.025634] stack backtrace: <4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1 <4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [110.025856] Workqueue: events engine_retire [i915] <4> [110.025872] Call Trace: <4> [110.025891] dump_stack+0x71/0x9b <4> [110.025907] mark_lock+0x49a/0x500 <4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200 <4> [110.025946] mark_held_locks+0x49/0x70 <4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50 <4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0 <4> [110.025995] _raw_spin_unlock_irq+0x24/0x50 <4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915] <4> [110.026376] __active_retire+0xb4/0x290 [i915] <4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0 <4> [110.026613] i915_request_retire+0x451/0x930 [i915] <4> [110.026766] retire_requests+0x4d/0x60 [i915] <4> [110.026919] engine_retire+0x63/0xe0 [i915] Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk (cherry picked from commit 6f7ac8285371fb0df58aba861eaab387f79ed04d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-09cpuidle: use first valid target residency as poll timeMarcelo Tosatti
Commit 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") changed, by mistake, the target residency from the first available sleep state to the last available sleep state (which should be longer). This might cause excessive polling. Fixes: 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-09Merge tag 'iio-fixes-for-5.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of fixes for IIO in the 5.5 cycle. Mixture of old things people have just hit, and a few late breaking issues with things that went in during the merge window. Being sent promptly to resolve potential DT breakage causing issues for binding test builds. * ad7606 - Avoid reading extra data from the device over what was intended. * ad7124 - Enable the internal reference when in use. * ad7292 - Fix up license for newly added binding. Better to not have this go out in a release with more limited header than intended. - Fix a constraint on number of channels. * ad7949 - Fix an issue which can result in readouts being from the wrong channel. * hdc100x - Fix wrong ABI usage (units) for relative humidity channel. * intel mrfld - Allocate right amount of private data (currently allocating too much). * ltc2983 - Avoid a potential issue with machine endianness and wrong length device tree read. * max1027 - Clean up leak of an iio_trigger on probe failure. * max9611 - Ensure we sleep long enough to successfully initialize the sensor. * mpu6050 - Fix wrong ABI usage (units) for temperature channel. * st_accel - Fix an unused variable warning. * st_lsm6dsx - Fix decimation factor issue that can lead to missaligned datasets (and hence garbage) - Fix an issue with how we track enabled fifo channels. - Avoid powering off the device if wake up events are enabled. * tag 'iio-fixes-for-5.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: max9611: Fix too short conversion time delay iio: ad7949: fix channels mixups iio: imu: st_lsm6dsx: do not power-off accel if events are enabled iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask iio: imu: st_lsm6dsx: fix decimation factor estimation iio: imu: inv_mpu6050: fix temperature reporting using bad unit iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting iio: adc: max1027: fix not unregistered iio trigger iio: adc: intel_mrfld_adc: Allocating too much data in probe() iio: adc: ad7124: Enable internal reference dt-bindings: iio: adc: ad7292: fix constraint over channel quantity dt-bindings: iio: adc: ad7292: Update SPDX identifier iio: temperature: ltc2983: fix u32 read into a unsigned long long iio: st_accel: Fix unused variable warning iio: adc: ad7606: fix reading unnecessary data from device
2019-12-09drm: meson: venc: cvbs: fix CVBS mode matchingMartin Blumenstingl
With commit 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") the drm core started honoring the picture_aspect_ratio field when comparing two drm_display_modes. Prior to that it was ignored. When the CVBS encoder driver was initially submitted there was no aspect ratio check. Switch from drm_mode_equal() to drm_mode_match() without DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the CVBS connector. When (for example) kmscube sets the output mode when using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the drm_mode_equal() fail as it include the aspect ratio. Prior to this patch kmscube reported: failed to set mode: Invalid argument The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at all. The Meson VPU driver does not rely on the aspect ratio for the CVBS output so we can safely decouple it from the hdmi_picture_aspect setting. Cc: <stable@vger.kernel.org> Fixes: 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") Fixes: bbbe775ec5b5da ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
2019-12-09Merge tag 'drm-misc-fixes-2019-11-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - A fix for a memory leak in the dma-buf support - One in mcde DSI support that leads to a pointer dereference Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094336.GA14723@gilmour.lan
2019-12-09PM / devfreq: Use PM QoS for sysfs min/max_freqLeonard Crestez
Switch the handling of min_freq and max_freq from sysfs to use the dev_pm_qos_request interface. Since PM QoS handles frequencies as kHz this change reduces the precision of min_freq and max_freq. This shouldn't introduce problems because frequencies which are not an integer number of kHz are likely not an integer number of Hz either. Try to ensure compatibility by rounding min values down and rounding max values up. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Add PM QoS supportLeonard Crestez
Register notifiers with the PM QoS framework in order to respond to requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY. No notifiers are added by this patch but PM QoS constraints can be imposed externally (for example from other devices). Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Don't fail devfreq_dev_release if not in listLeonard Crestez
Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Introduce get_freq_range helperLeonard Crestez
Moving handling of min/max freq to a single function and call it from update_devfreq and for printing min/max freq values in sysfs. This changes the behavior of out-of-range min_freq/max_freq: clamping is now done at evaluation time. This means that if an out-of-range constraint is imposed by sysfs and it later becomes valid then it will be enforced. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit (git 2.34.1) at 2024-06-07 04:08:50 +0000