Age | Commit message (Collapse) | Author |
|
drivers/net/can/pch_can.c
ae64438be192 ("can: dev: fix skb drop check")
1dd1b521be85 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-02
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
net/mlx5e: Fix tc acts array not to be dependent on enum order
net/mlx5e: Fix usage of DMA sync API
net/mlx5e: Add missing sanity checks for max TX WQE size
net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
net/mlx5: Allow async trigger completion execution on single CPU systems
net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================
Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)
This series contains updates to ice and iavf drivers.
Norbert stops disabling VF queues that are not enabled for ice driver.
Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
====================
Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.
Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Long Li says:
====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]
The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.
* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Define data structures for protection domain and memory registration
net: mana: Define data structures for allocating doorbell page from GDMA
net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
net: mana: Define max values for SGL entries
net: mana: Move header files to a common location
net: mana: Record port number in netdev
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Set the DMA device max segment size
net: mana: Handle vport sharing between devices
net: mana: Record the physical address for doorbell page region
net: mana: Add support for auxiliary device
====================
Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Two qcom driver fixes for broadcast completion reinit and check for
outanding writes. And a lone Intel driver fix for clock stop timeout"
* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: check for outanding writes before doing a read
soundwire: qcom: reinit broadcast completion
soundwire: intel: Initialize clock stop timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of odd driver fixes and a MAINTAINER email update:
- Update Kishon's email
- stms32 error code fix in driver probe
- tegra: fix for checking valid pointer
- qcom_qmp: null deref fix
- sunplus: error check fix
- ralink: add missing sentinel to table"
* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ralink: mt7621-pci: add sentinel to quirks table
phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
phy: qcom-qmp-combo: fix NULL-deref on runtime resume
phy: tegra: xusb: Fix crash during pad power on/down
phy: stm32: fix an error code in probe
MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"I apparently had missed tagging and sending this set of changes out
during the 6.1 merge window. But did get the associated dts changes
depending on this merged. The result is a regression in 6.1-rc on the
affected, older, Qualcomm platforms - in for form of them not booting.
So while these weren't regression fixes originally, they are now. It's
not introducing new beahavior, but simply extending the existing new
Devicetree model, to cover remaining platforms:
- extend the DeviceTree binding and implementation for the Qualcomm
hardware spinlock on some older platforms to follow the style of
the newer ones where the DeviceTree representation does not rely on
an intermediate syscon node"
* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
hwspinlock: qcom: add support for MMIO on older SoCs
hwspinlock: qcom: correct MMIO max register for newer SoCs
dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
|
|
kmemleak reports memory leaks in macvlan_common_newlink, as follows:
ip link add link eth0 name .. type macvlan mode source macaddr add
<MAC-ADDR>
kmemleak reports:
unreferenced object 0xffff8880109bb140 (size 64):
comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z.....
80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk
backtrace:
[<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
[<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
[<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
[<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
[<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
[<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
[<ffffffff81d98278>] rtnl_newlink+0x48/0x70
...
In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.
Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.
Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix
it.
Fixes: 5e123b844a1c ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.
Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition. A new
warning in clang will catch this at compile time:
drivers/net/ethernet/microsoft/mana/mana_en.c:382:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = mana_start_xmit,
^~~~~~~~~~~~~~~
1 error generated.
The return type of mana_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
[nathan: Rebase on net-next and resolve conflicts
Add note about new clang warning]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221109002629.1446680-1-nathan@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6dd81b ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.
Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
loongson_dwmac_probe()
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MANA hardware support protection domain and memory registration for use
in RDMA environment. Add those definitions and expose them for use by the
RDMA driver.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-12-git-send-email-longli@linuxonhyperv.com
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
When doing memory registration, the PF may respond with
GDMA_STATUS_MORE_ENTRIES to indicate a follow request is needed. This is
not an error and should be processed as expected.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-10-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The number of maximum SGl entries should be computed from the maximum
WQE size for the intended queue type and the corresponding OOB data
size. This guarantees the hardware queue can successfully queue requests
up to the queue depth exposed to the upper layer.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-9-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
In preparation to add MANA RDMA driver, move all the required header files
to a common location for use by both Ethernet and RDMA drivers.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-8-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The port number is useful for user-mode application to identify this
net device based on port index. Set to the correct value in ndev.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-7-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
RDMA device may need to create Ethernet device queues for use by Queue
Pair type RAW. This allows a user-mode context accesses Ethernet hardware
queues. Export the supporting functions for use by the RDMA driver.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-6-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
MANA hardware doesn't have any restrictions on the DMA segment size, set it
to the max allowed value.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-5-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
For outgoing packets, the PF requires the VF to configure the vport with
corresponding protection domain and doorbell ID for the kernel or user
context. The vport can't be shared between different contexts.
Implement the logic to exclusively take over the vport by either the
Ethernet device or RDMA device.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-4-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
For supporting RDMA device with multiple user contexts with their
individual doorbell pages, record the start address of doorbell page
region for use by the RDMA driver to allocate user context doorbell IDs.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-3-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
In preparation for supporting MANA RDMA driver, add support for auxiliary
device in the Ethernet driver. The RDMA device is modeled as an auxiliary
device to the Ethernet device.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-2-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
cxgb4vf_open()
When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied
during adapter goes up are not cleared. Fix it. Only be compiled, not be
tested.
Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use mdiodev accessors rather than accessing the bus and address in
the mdio_device structure and using the mdiobus accessors.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing genphy_loopback() is not working for TI DP83867 PHY as it
will disable autoneg support while another side is still enabling autoneg.
This is causing the link is not established and results in timeout error
in genphy_loopback() function.
Thus, based on TI PHY datasheet, introduce a TI PHY loopback function by
just configuring BMCR_LOOPBACK(Bit-9) in MII_BMCR register (0x0).
Tested working on TI DP83867 PHY for all speeds (10/100/1000Mbps).
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221108101527.612723-1-michael.wei.hong.sit@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to SGMII register dump
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the unused argument (i.e. struct ethtool_regs *regs) in
lan743x_common_regs( ) function arguments.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add locked bridge port support by reacting to changes in the
'BR_PORT_LOCKED' flag. When set, enable security checks on the local
port via the previously added SPFSR register.
When security checks are enabled, an incoming packet will trigger an FDB
lookup with the packet's source MAC and the FID it was classified to. If
an FDB entry was not found or was found to be pointing to a different
port, the packet will be dropped. Such packets increment the
"discard_ingress_general" ethtool counter. For added visibility, user
space can trap such packets to the CPU by enabling the "locked_port"
trap. Example:
# devlink trap set pci/0000:06:00.0 trap locked_port action trap
Unlike other configurations done via bridge port flags (e.g., learning,
flooding), security checks are enabled in the device on a per-port basis
and not on a per-{port, VLAN} basis. As such, scenarios where user space
can configure different locking settings for different VLANs configured
on a port need to be vetoed. To that end, veto the following scenarios:
1. Locking is set on a bridge port that is a VLAN upper
2. Locking is set on a bridge port that has VLAN uppers
3. VLAN upper is configured on a locked bridge port
Examples:
# bridge link set dev swp1.10 locked on
Error: mlxsw_spectrum: Locked flag cannot be set on a VLAN upper.
# ip link add link swp1 name swp1.10 type vlan id 10
# bridge link set dev swp1 locked on
Error: mlxsw_spectrum: Locked flag cannot be set on a bridge port that has VLAN uppers.
# bridge link set dev swp1 locked on
# ip link add link swp1 name swp1.10 type vlan id 10
Error: mlxsw_spectrum: VLAN uppers are not supported on a locked port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Propagate extack to mlxsw_sp_port_attr_br_pre_flags_set() in order to
communicate error messages related to bridge port flag validation.
Example:
# bridge link set dev swp1 locked on
Error: mlxsw_spectrum: Unsupported bridge port flag.
More error messages will be added in subsequent patches.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Spectrum, learning happens in parallel to the security checks.
Therefore, regardless of the result of the security checks, a learning
notification will be generated by the device and polled later on by the
driver.
Currently, the driver reacts to learning notifications by programming
corresponding FDB entries to the device. When a port is locked (i.e.,
has security checks enabled), this can no longer happen, as otherwise
any host will blindly gain authorization.
Instead, notify the learned entry as a locked entry to the bridge driver
that will in turn notify it to user space, in case MAB is enabled. User
space can then decide to authorize the host by clearing the "locked"
flag, which will cause the entry to be programmed to the device.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Subsequent patches will need to report locked FDB entries to the bridge
driver. Prepare for that by adding a 'locked' argument to
mlxsw_sp_fdb_call_notifiers() according to which the 'locked' bit is set
in the FDB notification info. For now, always pass 'false'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an API to enable or disable security checks on a local port. It will
be used by subsequent patches when the 'BR_PORT_LOCKED' flag is toggled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Switch Port FDB Security Register (SPFSR) that allows enabling
and disabling security checks on a given local port. In Linux terms, it
allows locking / unlocking a port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register the previously added packet traps with devlink. This allows
user space to tune their policers and in the case of the locked port
trap, user space can set its action to "trap" in order to gain
visibility into packets that were discarded by the device due to the
locked port check failure.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.
The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.
Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.
Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VF driver mistakenly counts VLAN 0 filters, when no PF driver
counts them.
Do not count VLAN 0 filters, when VLAN_V2 is engaged.
Counting those filters in, will affect filters size by -1, when
sending batched VLAN addition message.
Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously, during removal of trusted VF when VF is down there was
number of spurious interrupt equal to number of queues on VF.
Add check if VF already has inactive queues. If VF is disabled and
has inactive rx queues then do not disable rx queues.
Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is
disabled.
Fixes: efe41860008e ("ice: Fix memory corruption in VF driver")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
esw_attr is only allocated if namespace is fdb.
BUG: KASAN: slab-out-of-bounds in parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
Write of size 4 at addr ffff88815f185b04 by task tc/2135
CPU: 5 PID: 2135 Comm: tc Not tainted 6.1.0-rc2+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_report+0x170/0x471
? parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
kasan_report+0xbc/0xf0
? parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
Fixes: 94d651739e17 ("net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The pkt_reformat pointer being saved under flow_act and not
dest attribute in the termination table instance.
Fix the comparison pointers.
Also fix returning success if one pkt_reformat pointer is null
and the other is not.
Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the bellow commit, we added support for PPS policing without
removing the check which block offload of such cases.
Fix it by removing this check.
Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The tc acts array should not be dependent on kernel internal
flow action id enum. Fix the array initialization.
Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|