summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-07-28Merge tag 'amd-drm-fixes-6.5-2023-07-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-07-26: amdgpu: - gfxhub partition fix - Fix error handling in psp_sw_init() - SMU13 fix - DCN 3.1 fix - DCN 3.2 fix - Fix for display PHY programming sequence - DP MST error handling fix - GFX 9.4.3 fix amdkfd: - GFX11 trap handling fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726184936.7812-1-alexander.deucher@amd.com
2023-07-28ata: pata_ns87415: mark ns87560_tf_read staticArnd Bergmann
The global function triggers a warning because of the missing prototype drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes] 263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf) There are no other references to this, so just make it static. Fixes: c4b5b7b6c4423 ("pata_ns87415: Initial cut at 87415/87560 IDE support") Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-27Merge tag 'net-6.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, netfilter. Current release - regressions: - core: fix splice_to_socket() for O_NONBLOCK socket - af_unix: fix fortify_panic() in unix_bind_bsd(). - can: raw: fix lockdep issue in raw_release() Previous releases - regressions: - tcp: reduce chance of collisions in inet6_hashfn(). - netfilter: skip immediate deactivate in _PREPARE_ERROR - tipc: stop tipc crypto on failure in tipc_node_create - eth: igc: fix kernel panic during ndo_tx_timeout callback - eth: iavf: fix potential deadlock on allocation failure Previous releases - always broken: - ipv6: fix bug where deleting a mngtmpaddr can create a new temporary address - eth: ice: fix memory management in ice_ethtool_fdir.c - eth: hns3: fix the imp capability bit cannot exceed 32 bits issue - eth: vxlan: calculate correct header length for GPE - eth: stmmac: apply redundant write work around on 4.xx too" * tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) tipc: stop tipc crypto on failure in tipc_node_create af_unix: Terminate sun_path when bind()ing pathname socket. tipc: check return value of pskb_trim() benet: fix return value check in be_lancer_xmit_workarounds() virtio-net: fix race between set queues and probe net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64 splice, net: Fix splice_to_socket() for O_NONBLOCK socket net: fec: tx processing does not call XDP APIs if budget is 0 mptcp: more accurate NL event generation selftests: mptcp: join: only check for ip6tables if needed tools: ynl-gen: fix parse multi-attr enum attribute tools: ynl-gen: fix enum index in _decode_enum(..) netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR netfilter: nft_set_rbtree: fix overlap expiration walk igc: Fix Kernel Panic during ndo_tx_timeout callback net: dsa: qca8k: fix mdb add/del case with 0 VID net: dsa: qca8k: fix broken search_and_del net: dsa: qca8k: fix search_and_insert wrong handling of new rule net: dsa: qca8k: enable use_single_write for qca8xxx ...
2023-07-27Merge tag 'soundwire-6.5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fixes from Vinod Koul: - Core fix for enumeration completion - Qualcomm driver fix to update status - AMD driver fix for probe error check * tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: Fix a check for errors in probe() soundwire: qcom: update status correctly with mask soundwire: fix enumeration completion
2023-07-27Merge tag 'phy-fixes-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Out of bound fix for hisilicon phy - Qualcomm synopsis femto phy for keeping clock enabled during suspend and enabling ref clocks - Mediatek driver fixes for upper limit test and error code * tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe() phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code phy: qcom-snps-femto-v2: properly enable ref clock phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test phy: phy-mtk-dp: Fix an error code in probe()
2023-07-27hwmon: (k10temp) Enable AMD3255 Proc to show negative temperatureBaskaran Kannan
Industrial processor i3255 supports temperatures -40 deg celcius to 105 deg Celcius. The current implementation of k10temp_read_temp rounds off any negative temperatures to '0'. To fix this, the following changes have been made. A flag 'disp_negative' is added to struct k10temp_data to support AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor is found during k10temp_probe. Flag 'disp_negative' is used to determine whether to round off negative temperatures to '0' in k10temp_read_temp. Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com> Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive") Cc: stable@vger.kernel.org [groeck: Fixed multi-line comment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-27iommufd: Set end correctly when doing batch carryJason Gunthorpe
Even though the test suite covers this it somehow became obscured that this wasn't working. The test iommufd_ioas.mock_domain.access_domain_destory would blow up rarely. end should be set to 1 because this just pushed an item, the carry, to the pfns list. Sometimes the test would blow up with: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:batch_unpin+0xa2/0x100 [iommufd] Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc RSP: 0018:ffffc90001677a58 EFLAGS: 00010246 RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200 R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001 R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x5c/0x70 ? __die+0x1f/0x60 ? page_fault_oops+0x15d/0x440 ? lock_release+0xbc/0x240 ? exc_page_fault+0x4a4/0x970 ? asm_exc_page_fault+0x27/0x30 ? batch_unpin+0xa2/0x100 [iommufd] ? batch_unpin+0xba/0x100 [iommufd] __iopt_area_unfill_domain+0x198/0x430 [iommufd] ? __mutex_lock+0x8c/0xb80 ? __mutex_lock+0x6aa/0xb80 ? xa_erase+0x28/0x30 ? iopt_table_remove_domain+0x162/0x320 [iommufd] ? lock_release+0xbc/0x240 iopt_area_unfill_domain+0xd/0x10 [iommufd] iopt_table_remove_domain+0x195/0x320 [iommufd] iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_device_detach+0xc5/0x140 [iommufd] iommufd_selftest_destroy+0x1f/0x70 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_destroy+0x3a/0x50 [iommufd] iommufd_fops_ioctl+0xfb/0x170 [iommufd] __x64_sys_ioctl+0x40d/0x9a0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lore.kernel.org/r/3-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com Cc: <stable@vger.kernel.org> Fixes: f394576eb11d ("iommufd: PFN handling for iopt_pages") Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reported-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-07-27iommufd: IOMMUFD_DESTROY should not increase the refcountJason Gunthorpe
syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles") Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-07-27ublk: return -EINTR if breaking from waiting for existed users in DEL_DEVMing Lei
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(), return -EINTR and let user know what happens. Fixes: 0abe39dec065 ("block: ublk: improve handling device deletion") Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20230726144502.566785-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-27ublk: fail to recover device if queue setup is interruptedMing Lei
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be triggered. Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support") Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-27ublk: fail to start device if queue setup is interruptedMing Lei
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-by: German Maglione <gmaglione@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-27usb: misc: ehset: fix wrong if conditionXu Yang
A negative number from ret means the host controller had failed to send usb message and 0 means succeed. Therefore, the if logic is wrong here and this patch will fix it. Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry") Cc: stable <stable@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phyGratian Crisan
Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for USB device-mode. The phy chip usually has its 'reset' and 'chip select' lines connected to GPIOs described by ACPI fwnodes in the DSDT table. Because of hardware with missing ACPI resources for the 'reset' and 'chip select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") introduced a fallback gpiod_lookup_table with hard-coded mappings for Bay Trail devices. However there are existing Bay Trail based devices, like the National Instruments cRIO-903x series, where the phy chip has its 'reset' and 'chip-select' lines always asserted in hardware via resistor pull-ups. On this hardware the phy chip is always enabled and the ACPI dsdt table is missing information not only for the 'chip-select' and 'reset' lines but also for the BYT GPIO controller itself "INT33FC". With the introduction of the gpiod_lookup_table initializing the USB device-mode on these hardware now errors out. The error comes from the gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an -ENOENT error due to the missing ACPI entry for the INT33FC gpio controller used in the aforementioned table. This hardware used to work before because gpiod_get_optional() will return NULL instead of -ENOENT if no GPIO has been assigned to the requested function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs was then skipped (due to the NULL return). This is the correct behavior in cases where the phy chip is hardwired and there are no GPIOs to control. Since the gpiod_lookup_table relies on the presence of INT33FC fwnode in ACPI tables only add the table if we know the entry for the INT33FC gpio controller is present. This allows Bay Trail based devices with hardwired dwc3 ULPI phys to continue working. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <stable@kernel.org> Signed-off-by: Gratian Crisan <gratian.crisan@ni.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27benet: fix return value check in be_lancer_xmit_workarounds()Yuanjun Gong
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop' if an unexpected value is returned by pskb_trim(). Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-27staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()Zhang Shurong
The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption. Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()") Cc: stable <stable@kernel.org> Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVERRaphael Gallais-Pou
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This ultimately causes a warning when the module probes. Fixes it. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Link: https://lore.kernel.org/r/20230718172024.67488-1-rgallaispou@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27staging: r8712: Fix memory leak in _r8712_init_xmit_priv()Larry Finger
In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000 Cc: stable@vger.kernel.org Cc: Nam Cao <namcaov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27xen: speed up grant-table reclaimDemi Marie Obenour
When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-07-26virtio-net: fix race between set queues and probeJason Wang
A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net: fec: tx processing does not call XDP APIs if budget is 0Wei Fang
According to the clarification [1] in the latest napi.rst, the tx processing cannot call any XDP (or page pool) APIs if the "budget" is 0. Because NAPI is called with the budget of 0 (such as netpoll) indicates we may be in an IRQ context, however, we cannot use the page pool from IRQ context. [1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/ Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames") Signed-off-by: Wei Fang <wei.fang@nxp.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_statusGuenter Roeck
pmbus_regulator_get_status() acquires update_lock. pmbus_regulator_get_error_flags() acquires it again, resulting in an immediate deadlock. Call _pmbus_get_flags() from pmbus_regulator_get_status() directly to avoid the problem. Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com> Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u Cc: Naresh Solanki <Naresh.Solanki@9elements.com> Cc: stable@vger.kernel.org # v6.2+ Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-26Merge tag 'platform-drivers-x86-v6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: huawei-wmi: Silence ambient light sensor platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops platform/x86: think-lmi: Use kfree_sensitive instead of kfree platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks platform/x86: intel: hid: Always call BTNL ACPI method platform/x86/amd/pmf: Notify OS power slider update platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-26rbd: retrieve and check lock owner twice before blocklistingIlya Dryomov
An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26rbd: harden get_lock_owner_info() a bitIlya Dryomov
- we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26rbd: make get_lock_owner_info() return a single locker or NULLIlya Dryomov
Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26RDMA/irdma: Report correct WC errorSindhu Devale
Report the correct WC error if a MW bind is performed on an already valid/bound window. Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155439.1057-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-26RDMA/irdma: Fix op_type reporting in CQEsSindhu Devale
The op_type field CQ poll info structure is incorrectly filled in with the queue type as opposed to the op_type received in the CQEs. The wrong opcode could be decoded and returned to the ULP. Copy the op_type field received in the CQE in the CQ poll info structure. Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-26spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized readsDouglas Anderson
In the patch ("spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes") we detect reads that we can't handle properly and fallback to PIO mode. While that's correct behavior, we can do better by adding "spi_controller_mem_ops" for our controller. Once we do this then the caller will give us a transfer that's a multiple of 4-bytes so we can DMA. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/20230725110226.2.Id4a39804e01e4a06dae9b73fd2a5194c4c7ea453@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-26spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytesDouglas Anderson
The Qualcomm QSPI driver appears to require that any reads using DMA are a mutliple of 4 bytes. If this isn't true then the controller will clobber any extra bytes in memory following the last word. Let's detect this and falback to PIO. This fixes problems reported by slub_debug=FZPUA, which would complain about "kmalloc Redzone overwritten". One such instance said: 0xffffff80c29d541a-0xffffff80c29d541b @offset=21530. First byte 0x0 instead of 0xcc Allocated in mtd_kmalloc_up_to+0x98/0xac age=36 cpu=3 pid=6658 Tracing through what was happening I saw that, while we often did DMA tranfers of 0x1000 bytes, sometimes we'd end up doing ones of 0x41a bytes. Those 0x41a byte transfers were the problem. NOTE: a future change will enable the SPI "mem ops" to help avoid this case, but it still seems good to add the extra check in the transfer. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230725110226.1.Ia2f980fc7cd0b831e633391f0bb1272914d8f381@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-26igc: Fix Kernel Panic during ndo_tx_timeout callbackMuhammad Husaini Zulkifli
The Xeon validation group has been carrying out some loaded tests with various HW configurations, and they have seen some transmit queue time out happening during the test. This will cause the reset adapter function to be called by igc_tx_timeout(). Similar race conditions may arise when the interface is being brought down and up in igc_reinit_locked(), an interrupt being generated, and igc_clean_tx_irq() being called to complete the TX. When the igc_tx_timeout() function is invoked, this patch will turn off all TX ring HW queues during igc_down() process. TX ring HW queues will be activated again during the igc_configure_tx_ring() process when performing the igc_up() procedure later. This patch also moved existing igc_disable_tx_ring_hw() to avoid using forward declaration. Kernel trace: [ 7678.747813] ------------[ cut here ]------------ [ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out [ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0 [ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0 [ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c 89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e 89 c0 48 0f a3 05 0a c1 [ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282 [ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000 [ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880 [ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb [ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000 [ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18 [ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8 [ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 7679.379370] PKRU: 55555554 [ 7679.386446] Call Trace: [ 7679.393152] <TASK> [ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10 [ 7679.407870] call_timer_fn+0x31/0x110 [ 7679.415698] expire_timers+0xb2/0x120 [ 7679.423403] run_timer_softirq+0x179/0x1e0 [ 7679.431532] ? __schedule+0x2b1/0x820 [ 7679.439078] __do_softirq+0xd1/0x295 [ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 7679.454867] run_ksoftirqd+0x22/0x30 [ 7679.462058] smpboot_thread_fn+0xb7/0x160 [ 7679.469670] kthread+0xcd/0xf0 [ 7679.476097] ? __pfx_kthread+0x10/0x10 [ 7679.483211] ret_from_fork+0x29/0x50 [ 7679.490047] </TASK> [ 7679.495204] ---[ end trace 0000000000000000 ]--- [ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump [ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value [ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641 [ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683 [ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040 [ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800 [ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081 [ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022 [ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031 [ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030 [ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808 [ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000 [ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa [ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000 [ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108 [ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter [ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8086.945561] ------------[ cut here ]------------ Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0 Oops: (null) due to oops @ 0xffffffff81573888 RIP: 0010:dql_completed+0x148/0x160 Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? igc_poll+0x1a9/0x14d0 [igc] __napi_poll+0x2e/0x1b0 net_rx_action+0x126/0x250 __do_softirq+0xd1/0x295 irq_exit_rcu+0xc5/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 cpuidle_enter+0x2e/0x50 call_cpuidle+0x23/0x40 do_idle+0x1be/0x220 cpu_startup_entry+0x20/0x30 rest_init+0xb5/0xc0 arch_call_rest_init+0xe/0x30 start_kernel+0x448/0x760 x86_64_start_kernel+0x109/0x150 secondary_startup_64_no_verify+0xe0/0xeb </TASK> more> [0]kdb> [0]kdb> [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, type go a second time if you really want to continue [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, attempting to continue [ 8086.955689] refcount_t: underflow; use-after-free. [ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110 [ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110 [ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81 48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d 42 c6 eb 00 00 0f 85 59 ff ff ff 48 [ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286 [ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888 [ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880 [ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28 [ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000 [ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00 [ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955804] PKRU: 55555554 [ 8086.955805] Call Trace: [ 8086.955806] <IRQ> [ 8086.955808] tcp_wfree+0x112/0x130 [ 8086.955814] skb_release_head_state+0x24/0xa0 [ 8086.955818] napi_consume_skb+0x9c/0x160 [ 8086.955821] igc_poll+0x5d8/0x14d0 [igc] [ 8086.955835] __napi_poll+0x2e/0x1b0 [ 8086.955839] net_rx_action+0x126/0x250 [ 8086.955843] __do_softirq+0xd1/0x295 [ 8086.955846] irq_exit_rcu+0xc5/0xf0 [ 8086.955851] common_interrupt+0x86/0xa0 [ 8086.955857] </IRQ> [ 8086.955857] <TASK> [ 8086.955858] asm_common_interrupt+0x27/0x40 [ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955875] cpuidle_enter+0x2e/0x50 [ 8086.955880] call_cpuidle+0x23/0x40 [ 8086.955884] do_idle+0x1be/0x220 [ 8086.955887] cpu_startup_entry+0x20/0x30 [ 8086.955889] rest_init+0xb5/0xc0 [ 8086.955892] arch_call_rest_init+0xe/0x30 [ 8086.955895] start_kernel+0x448/0x760 [ 8086.955898] x86_64_start_kernel+0x109/0x150 [ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955904] </TASK> [ 8086.955904] ---[ end trace 0000000000000000 ]--- [ 8086.955912] ------------[ cut here ]------------ [ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27! [ 8086.955918] invalid opcode: 0000 [#1] SMP [ 8086.955922] RIP: 0010:dql_completed+0x148/0x160 [ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc [ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 [ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 [ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 [ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 [ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 [ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 [ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955938] PKRU: 55555554 [ 8086.955939] Call Trace: [ 8086.955939] <IRQ> [ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc] [ 8086.955949] __napi_poll+0x2e/0x1b0 [ 8086.955952] net_rx_action+0x126/0x250 [ 8086.955956] __do_softirq+0xd1/0x295 [ 8086.955958] irq_exit_rcu+0xc5/0xf0 [ 8086.955961] common_interrupt+0x86/0xa0 [ 8086.955964] </IRQ> [ 8086.955965] <TASK> [ 8086.955965] asm_common_interrupt+0x27/0x40 [ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955978] cpuidle_enter+0x2e/0x50 [ 8086.955981] call_cpuidle+0x23/0x40 [ 8086.955984] do_idle+0x1be/0x220 [ 8086.955985] cpu_startup_entry+0x20/0x30 [ 8086.955987] rest_init+0xb5/0xc0 [ 8086.955990] arch_call_rest_init+0xe/0x30 [ 8086.955992] start_kernel+0x448/0x760 [ 8086.955994] x86_64_start_kernel+0x109/0x150 [ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955998] </TASK> [ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs [16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs [16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs [16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs [16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs [16762.543784] ---[ end trace 0000000000000000 ]--- [16762.849099] RIP: 0010:dql_completed+0x148/0x160 PANIC: Fatal exception in interrupt Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi
The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix broken search_and_delChristian Marangi
On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi
On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: enable use_single_write for qca8xxxChristian Marangi
The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown <broonie@kernel.org> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26misc/genalloc: Name subpools by of_node_full_name()Linus Walleij
A previous commit tried to come up with more generic subpool names, but this isn't quite working: the node name was used elsewhere to match pools to consumers which regressed the nVidia Tegra 2/3 video decoder. Revert back to an earlier approach using of_node_full_name() instead of just the name to make sure the pool name is more unique, and change both sites using this in the kernel. It is not perfect since two SRAM nodes could have the same subpool name but it makes the situation better than before. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: 21e5a2d10c8f ("misc: sram: Generate unique names for subpools") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20230622074520.3058027-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-26xen/evtchn: Introduce new IOCTL to bind static evtchnRahul Singh
Xen 4.17 supports the creation of static evtchns. To allow user space application to bind static evtchns introduce new ioctl "IOCTL_EVTCHN_BIND_STATIC". Existing IOCTL doing more than binding that’s why we need to introduce the new IOCTL to only bind the static event channels. Static evtchns to be available for use during the lifetime of the guest. When the application exits, __unbind_from_irq() ends up being called from release() file operations because of that static evtchns are getting closed. To avoid closing the static event channel, add the new bool variable "is_static" in "struct irq_info" to mark the event channel static when creating the event channel to avoid closing the static evtchn. Also, take this opportunity to remove the open-coded version of the evtchn close in drivers/xen/evtchn.c file and use xen_evtchn_close(). Signed-off-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/ae7329bf1713f83e4aad4f3fa0f316258c40a3e9.1689677042.git.rahul.singh@arm.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-07-25net: ipa: only reset hashed tables when supportedAlex Elder
Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. Cc: <stable@vger.kernel.org> # 6.1.x Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists") Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFFLin Ma
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read. Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26ata: pata_octeon_cf: fix error return code in octeon_cf_probe()Yang Yingliang
The variable 'rv' is set to 0 after calling of_property_read_reg(), so it cannot be used as an error code. Change to using correct error codes in the error path. Fixes: d0b2461678b1 ("ata: Use of_property_read_reg() to parse "reg"") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-26ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer()Minjie Du
It is possible for dma_request_chan() to return EPROBE_DEFER, which means acdev->host->dev is not ready yet. At this point dev_err() will have no output. Use dev_err_probe() instead. Signed-off-by: Minjie Du <duminjie@vivo.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-25drm/amdgpu: Restore HQD persistent state registerLijo Lazar
On GFX v9.4.3, compute queue MQD is populated using the values in HQD persistent state register. Hence don't clear the values on module unload, instead restore it to the default reset value so that MQD is initialized correctly during next module load. In particular, preload flag needs to be set on compute queue MQD, otherwise it could cause uninitialized values being used at device reset state resulting in EDC. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25regulator: REGULATOR_QCOM_REFGEN should depend on ARCH_QCOMGeert Uytterhoeven
The Qualcomm MMIO-mapped reference voltage regulator is only present on Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. Fixes: 7cbfbe23796086fd ("regulator: Introduce Qualcomm REFGEN regulator driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/60938ed138c9331ba3d2891fbd3b3d6644d3fbdc.1690300012.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: 4f6d9e38c4d2 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0Alvin Lee
[Description] It is not valid to set the WDIVIDER value to 0, so do not re-write to DISPCLK_WDIVIDER if the current value is 0 (i.e., it is at it's initial value and we have not made any requests to change DISPCLK yet). Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Guard DCN31 PHYD32CLK logic against chip familyGeorge Shen
[Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr ClockJane Jian
Report current GFX clock also from average clock value as the original CurrClock data is not valid/accurate any more as per FW team Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd: Fix an error handling mistake in psp_sw_init()Mario Limonciello
If the second call to amdgpu_bo_create_kernel() fails, the memory allocated from the first call should be cleared. If the third call fails, the memory from the second call should be cleared. Fixes: b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)Victor Lu
An instance of for_each_inst() was not changed to match its new behaviour and is causing a loop. v2: remove tmp_mask variable Fixes: b579ea632fca ("drm/amdgpu: Modify for_each_inst macro") Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-04-02 01:03:40 +0000