| Age | Commit message (Collapse) | Author |
|---|
|
Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.
My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.
Fix the problem by using the devres variant of mdiobus_register.
Fixes: ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none).
Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.
Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.
systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
mdiobus_free+0x44/0x50
devm_mdiobus_free+0x10/0x20
devres_release_all+0xa0/0x100
__device_release_driver+0x190/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x4c/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x94/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_device_remove+0x24/0x40
__fsl_mc_device_remove+0xc/0x20
device_for_each_child+0x58/0xa0
dprc_remove+0x90/0xb0
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_bus_remove+0x80/0x100
fsl_mc_bus_shutdown+0xc/0x1c
platform_shutdown+0x20/0x30
device_shutdown+0x154/0x330
kernel_power_off+0x34/0x6c
__do_sys_reboot+0x15c/0x250
__arm64_sys_reboot+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x4c/0x150
el0_svc+0x24/0xb0
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x178/0x17c
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.
Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.
I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.
Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This caused a significant performance degredation when using generic XDP
with multiple queues.
Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Tao Liu <xliutaox@google.com>
Link: https://lore.kernel.org/r/20220207175901.2486596-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.
But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.
This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.
Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.
However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].
This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.
Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.
[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c
Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.
The portstats pointer was incorrectly incremented when fetching priority
based statistics.
Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
|
|
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Most interesting and urgent is the Intel stuff affecting Chromebooks
and laptops.
- Fix up group name building on the Intel Thunderbay
- Fix interrupt problems on the Intel Cherryview
- Fix some pin data on the Sunxi H616
- Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the
merge window
- Fix an unexpected interrupt problem on the Intel Sunrisepoint
- Fix a glitch when updating IRQ flags on all Intel pin controllers
- Revert a Zynqmp patch to unify the pin naming, let's find some
better solution
- Fix some error paths in the Broadcom BCM2835 driver
- Fix a Kconfig problem pertaining to the BCM63XX drivers
- Fix the regmap support in the Microchip SGPIO driver"
* tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: microchip-sgpio: Fix support for regmap
pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
pinctrl: bcm2835: Fix a few error paths
pinctrl: zynqmp: Revert "Unify pin naming"
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
pinctrl: intel: fix unexpected interrupt
pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
pinctrl: sunxi: Fix H616 I2S3 pin data
pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping
pinctrl: thunderbay: rework loops looking for groups names
pinctrl: thunderbay: comment process of building functions a bit
|
|
Do not try to use any SKB fields after the packet has been passed up in the
receive stack.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-01
This series contains updates to e1000e driver only.
Sasha removes CSME handshake with TGL platform as this is not supported
and is causing hardware unit hangs to be reported.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Handshake with CSME starts from ADL platforms
e1000e: Separate ADP board type from TGP
====================
Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations).
Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.
"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.
Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the driver adds implicit modify hdr action for
decap rules on tunnel devices if the port is an ovs port.
This is also done if the action is drop and makes the modify
hdr redundant and also the FW doesn't support it and will generate
a syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fix it by adding the implicit modify hdr only for fwd actions.
Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
IPsec Tunnel mode crypto offload software parser (SWP) setting in data
path currently always set the inner L4 offset regardless of the
encapsulated L4 header type and whether it exists in the first place,
this breaks non TCP/UDP traffic as such.
Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4
header protocol is TCP/UDP.
While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP
flag to address the case where the ip header protocol is IPv6.
Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
IPsec crypto offload always set the ethernet segment checksum flags with
the inner L4 header checksum flag enabled for encapsulated IPsec offloaded
packet regardless of the encapsulated L4 header type, and even if it
doesn't exists in the first place, this breaks non TCP/UDP traffic as
such.
Set the inner L4 checksum flag only when the encapsulated L4 header
protocol is TCP/UDP using software parser swp_inner_l4_offset field as
indication.
Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth".
max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become
0 when ceil is small, leading to an undesired effect of having no
bandwidth limit.
This commit fixes it by rounding up small values of ceil to 1 Mbit/s.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The variable modact is not initialized before used in command
modify header allocation which can cause command to fail.
Fix by initializing modact with zeros.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Current implementation of bond netevent handler only check if
the handled netdev is VF representor and it missing a check if
the VF representor is on the same phys device of the bond handling
the netevent.
Fix by adding the missing check and optimizing the check if
the netdev is VF representor so it will not access uninitialized
private data and crashes.
BUG: kernel NULL pointer dereference, address: 000000000000036c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Workqueue: eth3bond0 bond_mii_monitor [bonding]
RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core]
RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000
RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880
RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008
R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10
R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core]
mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core]
mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core]
raw_notifier_call_chain+0x41/0x60
call_netdevice_notifiers_info+0x34/0x80
netdev_lower_state_changed+0x4e/0xa0
bond_mii_monitor+0x56b/0x640 [bonding]
process_one_work+0x1b9/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case the HW doesn't perform header-data split, it will write the whole
packet into the data buffer in the WQ, in this case the SHAMPO CQE handler
couldn't use the header entry to build the SKB, instead it should allocate
a new memory to build the SKB using the function:
mlx5e_skb_from_cqe_mpwrq_nonlinear.
Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The HW doesn't wrap the CQE.shampo.header_index field according to the
headers buffer size, instead it always increases it until reaching overflow
of u16 size.
Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the
CQE header_index field to find the actual header index in the headers buffer.
Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When changing mode to switchdev, rep bridge init registered to netdevice
notifier holds the devlink lock and then takes pernet_ops_rwsem.
At that time deleting a netns holds pernet_ops_rwsem and then takes
the devlink lock.
Example sequence is:
$ ip netns add foo
$ devlink dev eswitch set pci/0000:00:08.0 mode switchdev &
$ ip netns del foo
deleting netns trace:
[ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0
[ 1185.370984] ? xt_find_table+0x40/0x100
[ 1185.373244] ? __mutex_lock+0x24a/0x15a0
[ 1185.375494] ? net_generic+0xa0/0x1c0
[ 1185.376844] ? wait_for_completion_io+0x280/0x280
[ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0
[ 1185.380557] ? xt_find_table+0xda/0x100
[ 1185.381367] cleanup_net+0x372/0x8e0
changing mode to switchdev trace:
[ 1185.411267] down_write+0x13a/0x150
[ 1185.412029] ? down_write_killable+0x180/0x180
[ 1185.413005] register_netdevice_notifier+0x1e/0x210
[ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core]
[ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core]
[ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core]
[ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core]
[ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core]
[ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core]
[ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core]
[ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core]
[ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core]
[ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core]
Fix this by registering rep bridges for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
RIP: 0010:run_timer_softirq+0x137/0x420
<IRQ>
recalibrate_cpu_khz+0x10/0x10
ktime_get+0x3e/0xa0
? sched_clock_cpu+0xb/0xc0
__do_softirq+0xf5/0x2ea
irq_exit_rcu+0xc1/0xf0
sysvec_apic_timer_interrupt+0x9e/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
</IRQ>
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.
While at it, the cross-pages read size adjustment was changed to be more
intuitive.
Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Even though net_device->name is guaranteed to be null-terminated string of
size<=IFNAMSIZ, the test robot complains that return value of netdev_name()
can be larger:
In file included from include/trace/define_trace.h:102,
from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113,
from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12:
drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template':
>> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
24 | strncpy(__entry->dev_name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
25 | netdev_name(fdb->dev),
| ~~~~~~~~~~~~~~~~~~~~~~
26 | IFNAMSIZ);
| ~~~~~~~~~
This is caused by the fact that default value of IFNAMSIZ is 16, while
placeholder value that is returned by netdev_name() for unnamed net devices
is larger than that.
The offending code is in a tracing function that is only called for mlx5
representors, so there is no straightforward way to reproduce the issue but
let's fix it for correctness sake by replacing strncpy() with strscpy() to
ensure that resulting string is always null-terminated.
Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.
Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events")
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-31
This series contains updates to i40e driver only.
Jedrzej fixes a condition check which would cause an error when
resetting bandwidth when DCB is active with one TC.
Karen resolves a null pointer dereference that could occur when removing
the driver while VSI rings are being disabled.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix reset path while removing the driver
i40e: Fix reset bw limit when DCB enabled with 1 TC
====================
Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.
Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.
Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75
Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Build bot produced a smatch indentation warning,
the code looks correct but it mixes spaces and tabs.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220131211730.3940875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are quite a few fixes that have accumilated since the merge
window here, all driver specific and none super urgent, plus a new
device ID for the Rockchip driver"
* tag 'spi-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mediatek: Avoid NULL pointer crash in interrupt
spi: dt-bindings: Fix 'reg' child node schema
spi: bcm-qspi: check for valid cs before applying chip select
spi: uniphier: fix reference count leak in uniphier_spi_probe()
spi: meson-spicc: add IRQ check in meson_spicc_probe
spi: uniphier: Fix a bug that doesn't point to private data correctly
spi: change clk_disable_unprepare to clk_unprepare
spi: spi-rockchip: Add rk3568-spi compatible
spi: stm32: make SPI_MASTER_MUST_TX flags only specific to STM32F4
spi: stm32: remove inexistant variables in struct stm32_spi_cfg comment
spi: stm32-qspi: Update spi registering
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of very minor fixes for the regulator framework, nothing at
all urgent here"
* tag 'regulator-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: MAX20086: add gpio/consumer.h
regulator: max20086: fix error code in max20086_parse_regulators_dt()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"This consists of various build- and bug-fixes as well as a few
hardware-id additions.
Highlights:
- Bunch of fixes for the new x86-android-tablets module
- Misc other fixes
- A couple of hw-id additions"
* tag 'platform-drivers-x86-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix incorrect use of platform profile on AMD platforms
platform/x86: amd-pmc: Correct usage of SMU version
platform/x86: asus-tf103c-dock: Make 2 global structs static
platform/x86: amd-pmc: Make amd_pmc_stb_debugfs_fops static
platform/x86: ISST: Fix possible circular locking dependency detected
platform/x86: intel_crystal_cove_charger: Fix IRQ masking / unmasking
platform/x86: thinkpad_acpi: Add quirk for ThinkPads without a fan
platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1
platform/surface: Reinstate platform dependency
platform/x86: x86-android-tablets: Trivial typo fix for MODULE_AUTHOR
platform/x86: x86-android-tablets: Fix the buttons on CZC P10T tablet
platform/x86: x86-android-tablets: Constify the gpiod_lookup_tables arrays
platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info
platform/x86: x86-android-tablets: Add support for disabling ACPI _AEI handlers
platform/x86: x86-android-tablets: Correct crystal_cove_charger module name
|
|
Handshake with CSME/AMT on none provisioned platforms during S0ix flow
is not supported on TGL platform and can cause to HW unit hang. Update
the handshake with CSME flow to start from the ADL platform.
Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
platforms
Lenovo AMD based platforms have been offering platform_profiles but they
are not working correctly. This is because the mode we are using on the
Intel platforms (MMC) is not available on the AMD platforms.
This commit adds checking of the functional capabilities returned by the
BIOS to confirm if MMC is supported or not. Profiles will not be
available if the platform is not MMC capable.
I'm investigating and working on an alternative for AMD platforms but
that is still work-in-progress.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
