summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-26mt76: move mac_work in mt76_core moduleLorenzo Bianconi
Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7615: move testmode data from dev to phyShayne Chen
Move per-chip testmode data to mt7615_phy, to properly support reg_backup and rx status of each band in testmode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: move testmode data from dev to phyShayne Chen
Move per-chip testmode data to mt7915_phy, to properly support reg_backup and rx status of each band in testmode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: testmode: move mtd part to mt76_devShayne Chen
Move testmode mtd variables to mt76_dev, since they are the same on each phy. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: testmode: introduce dbdc supportShayne Chen
Add testmode support for DBDC NICs (both MT7615D and MT7915D work). Testmode data and parameters are moved from per-dev to per-phy for maintaining the value of each band. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add partial add_bss_info command on testmode initShayne Chen
This is a preliminary patch for DBDC and ipg config support in testmode. The wmm_idx of band1 should be configured by this command to make band1 Tx work normally. Also, for setting ipg, FW needs a non-empty bss_info structure to do edca parameters update. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: drop zero-length packet to avoid Tx hangRyder Lee
Hardware wouldn't add LLC-SNAP when skb->data_len is 0, which causes Tx hang, so add a check to drop this kind of packet. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: simplify mt7915_mcu_send_message routineLorenzo Bianconi
Simplify mt7915_mcu_send_message routine removing unused code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: fix endianness warning in mt7915_mcu_set_radar_thLorenzo Bianconi
Fix the following sparse warning in mt7915_mcu_set_radar_th routine: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: warning: incorrect type in initializer (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: expected unsigned int [usertype] min_pri drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: got restricted __le32 [usertype] drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: warning: incorrect type in initializer (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: expected unsigned int [usertype] max_pri drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: got restricted __le32 [usertype] drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: warning: incorrect type in initializer (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: expected unsigned int [usertype] min_stgpr_diff drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: got restricted __le32 [usertype] Fixes: cee236e1489ec ("mt76: mt7915: fix endian issues") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add support for flash modeShayne Chen
Add support for getting rf values from flash. This is used for some test purposes and products. If the mtd partition is configured in dts, driver will read from flash to init eeprom command; if not, still init it with efuse's values. An example: &slot0 { mt7915@0,0 { reg = <0x0000 0 0 0 0>; device_type = "pci"; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: run mt7915_configure_filter holding mt76 mutexLorenzo Bianconi
In order to avoid races, run mt7915_configure_filter routine holding mt76 mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7615: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7615: reset token when mac_reset happensRyder Lee
Reset token in mt7615_mac_reset_work() to avoid possible leakege. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: reset token when mac_reset happensRyder Lee
Reset buffering token in mt7915_mac_reset_work() to avoid possible leakege, which leads to Tx stop after mac reset. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: fix MT_CIPHER_BIP_CMAC_128 setkeyRyder Lee
MCU expects to set WLAN_CIPHER_SUITE_CCMP and WLAN_CIPHER_SUITE_AES_CMAC at the same time, so adding an intermediate buffer for batch update. Tested-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7615: add vif check in mt7615_update_vif_beacon()Ryder Lee
This avoids the WARN_ON(1) calltrace in station mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add vif check in mt7915_update_vif_beacon()Ryder Lee
To avoid the warn_on() calltrace in station mode. [ 4522.024382] ieee80211_tx_dequeue+0x1258/0x1298 [mac80211] [ 4522.029868] ieee80211_beacon_get_template+0x10/0x18 [mac80211] [ 4522.035780] mt7915_mcu_add_beacon+0x2c/0x208 [mt7915e] [ 4522.040997] mt7915_mcu_get_rx_rate+0x304/0x878 [mt7915e] [ 4522.046394] ieee80211_delayed_tailroom_dec+0x158/0x180 [mac80211] [ 4522.052573] ieee80211_iterate_interfaces+0x48/0x68 [mac80211] [ 4522.058398] mt7915_mac_reset_work+0x3b4/0x630 [mt7915e] [ 4522.063704] process_one_work+0x1fc/0x390 [ 4522.067703] worker_thread+0x48/0x4d0 [ 4522.071356] kthread+0x120/0x128 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-25iwl4965: do not process non-QOS frames on txq->sched_retry pathStanislaw Gruszka
We have already WARN_ON(!qc) for non-QOS frame on txq->sched_retry path, but we continue to process, what makes no sense since tid is not initialized. Non QOS frame should never happen when aggregation is enabled on queue, so do not process that. Patch should fix smatch warning: drivers/net/wireless/intel/iwlegacy/4965-mac.c:2822 il4965_hdl_tx() error: uninitialized symbol 'tid'. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210119100621.439134-1-stf_xl@wp.pl
2021-01-25mt7601u: process tx URBs with status EPROTO properlyLorenzo Bianconi
Similar to commit 0e40dbd56d67 ("mt7601u: process URBs in status EPROTO properly"), do not process tx URBs if marked with status set to EPROTO. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/72392e8341aa8591c0b9962661a6ca26b1198f32.1610919534.git.lorenzo@kernel.org
2021-01-25wlcore: Fix command execute failure 19 for wl12xxTony Lindgren
We can currently get a "command execute failure 19" error on beacon loss if the signal is weak: wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211]) Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done. This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with. As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required"). If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used. With this fix wlcore reconnects properly after a beacon loss. Cc: Raz Bouganim <r-bouganim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
2021-01-25mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batchLorenzo Bianconi
Similar to mt76 driver, rely on ieee80211_rx_list in order to improve icache footprint Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/5c72fa2dda45c1ae3f285af80c02f3db23341d85.1610580222.git.lorenzo@kernel.org
2021-01-25rtw88: 8723de: adjust the LTR settingChin-Yen Lee
The LTR mechanism enables PCIE Endpoints to report the service latency requirements and CPU will enter appropriate sleep state to save power based on the LTR value. 8723de provides two registers to config the LTR, and the original setting is too short for CPU to ente sleep state. The patch adjust the LTR setting. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210113014342.3615-1-pkshih@realtek.com
2021-01-25rtlwifi: rtl8821ae: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl8821ae, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c, "if (rtlefuse->autoload_failflag == false)" can be replaced with "if (!rtlefuse->autoload_failflag)" Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-6-yashsri421@gmail.com
2021-01-25rtlwifi: rtl8192se: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl8192se, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-5-yashsri421@gmail.com
2021-01-25rtlwifi: rtl8188ee: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl8188ee, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c, "if (mac->act_scanning == true)" can be replaced with "if (mac->act_scanning)" Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-4-yashsri421@gmail.com
2021-01-25rtlwifi: rtl8192c-common: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl8192c-common, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8192c/dm_common.c, "else if (initialized == false) {" can be replaced with "else if (!initialized) {" Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-3-yashsri421@gmail.com
2021-01-25rtlwifi: rtl_pci: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl_pci, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false E.g., in drivers/net/wireless/realtek/rtlwifi/ps.c, "if (find_p2p_ie == true)" can be replaced with "if (find_p2p_ie)" Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-2-yashsri421@gmail.com
2021-01-14wlcore: Downgrade exceeded max RX BA sessions to debugTony Lindgren
We can get the following in the logs every few minutes or so: wlcore: ERROR exceeded max RX BA sessions Let's downgrade the message to a debug message as suggested by the TI support folks at: https://e2e.ti.com/support/wireless-connectivity/wifi/f/968/p/352435/1244754 "The WL127x firmware supports max of 3 BA sessions. It cannot be increased. I think the problem here is the peer trying to initiate a 4th BA session (ADDBA request)." Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210101065955.63386-1-tony@atomide.com
2021-01-14wilc1000: use flexible-array member instead of zero-length arrayTian Tao
Use flexible-array member introduced in C99 instead of zero-length array. Most of zero-length array was already taken care in previous patch [1]. [1]. https://patchwork.kernel.org/patch/11394197/ Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608881703-37060-1-git-send-email-tiantao6@hisilicon.com
2021-01-14brcmfmac: clear EAP/association status bits on linkdown eventsLuca Pesce
This ensure that previous association attempts do not leave stale statuses on subsequent attempts. This fixes the WARN_ON(!cr->bss)) from __cfg80211_connect_result() when connecting to an AP after a previous connection failure (e.g. where EAP fails due to incorrect psk but association succeeded). In some scenarios, indeed, brcmf_is_linkup() was reporting a link up event too early due to stale BRCMF_VIF_STATUS_ASSOC_SUCCESS bit, thus reporting to cfg80211 a connection result with a zeroed bssid (vif->profile.bssid is still empty), causing the WARN_ON due to the call to cfg80211_get_bss() with the empty bssid. Signed-off-by: Luca Pesce <luca.pesce@vimar.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608807119-21785-1-git-send-email-luca.pesce@vimar.com
2021-01-14brcmfmac: Delete useless kfree codeZheng Yongjun
A null pointer will be passed to a kfree() call after a kzalloc() call failed. This code is useless. Thus delete the extra function call. A goto statement is also no longer needed. Thus adjust an if branch. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201222135113.20680-1-zhengyongjun3@huawei.com
2021-01-14qtnfmac_pcie: Use module_pci_driverAmey Narkhede
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201221075735.197255-1-ameynarkhede03@gmail.com
2021-01-14mt7601u: check the status of device in calibrationZhi Han
When the usb device being plugged out, before ieee80211 gets to know the hw being removed, it gets to know that the association status changed, and thus ask for the device to do the calibration. This causes error as the hw is absent. This can be avoid by checking the status of the device before sending the calibration request to the device. Signed-off-by: Zhi Han <z.han@gmx.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201217161657.GB12562@E480
2021-01-14mt7601u: process URBs in status EPROTO properlyZhi Han
When the usb device being plugged out, before the usb_driver:disconnect called by e.g workqueue, it is possible that some URBs are still in processing, and being marked as EPROTO in host controller. Those URBs should not be scheduled in complete_rx callback function to get further processing. Signed-off-by: Zhi Han <z.han@gmx.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201217161302.GA12562@E480
2021-01-14brcmfmac: support BCM4365E with 43666 ChipCommon chip IDRafał Miłecki
This adds support for the BCM43666/4 which seems to be using the same firmware as BCM4366 (4366c0). I found it in the Netgear R8000P router. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214101553.32097-1-zajec5@gmail.com
2021-01-14wilc1000: fix spelling mistake in Kconfig "devision" -> "division"Colin Ian King
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201216115808.12987-1-colin.king@canonical.com
2021-01-14mwifiex: pcie: Drop bogus __refdata annotationGeert Uytterhoeven
As the Marvell PCIE WiFi-Ex driver does not have any code or data located in initmem, there is no need to annotate the mwifiex_pcie structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211133835.2970384-1-geert+renesas@glider.be
2021-01-14rtw88: Simplify bool comparisonYANG LI
Fix the following coccicheck warning: ./drivers/net/wireless/realtek/rtw88/debug.c:800:17-23: WARNING: Comparison of 0/1 to bool variable Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1610445040-23599-1-git-send-email-abaci-bugfix@linux.alibaba.com
2021-01-14rtw88: coex: set 4 slot TDMA for BT link and WL busyChing-Te Ku
To protect both of WL/BT performance while BT is under re-link state. 4-slot mode TDMA can make the re-link more sensitive and mitigate the WL throughput drop. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210112021135.3823-1-pkshih@realtek.com
2021-01-14rtw88: 8821c: apply CCK PD level which calculates from dynamic mechanismVincent Fann
Hal function must follow the value that calculates from dynamic mechanism. Force to set new_lvl to 4 damages receiving ability. System will not able to reconnect to the AP if wifi unexpected disconnecting at this moment. Signed-off-by: Vincent Fann <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201228082516.16488-1-pkshih@realtek.com
2021-01-14rtw88: reduce the log level for failure of tx reportChin-Yen Lee
Sometimes driver does not get tx report from firmware because wifi environment is too noisy to get ack from AP about a TX frame, or firmware is too busy to report driver in a estimated time. But the condition will not affect wifi function or throughput. So we reduce the log level to rtw_debug instead of scary backtrace. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201228082433.16431-1-pkshih@realtek.com
2021-01-14rtw88: Delete useless kfree codeZheng Yongjun
The parameter of kfree function is NULL, so kfree code is useless, delete it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201216130442.13869-1-zhengyongjun3@huawei.com
2021-01-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.12. Major changes: ath9k * more robust encryption key cache management
2021-01-09net: dsa: bcm_sf2: support BCM4908's integrated switchRafał Miłecki
BCM4908 family SoCs come with integrated Starfighter 2 switch. Its registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated PHYs and 8 ports. It also supports RGMII and SerDes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210106213202.17459-3-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: don't wakeup-enable device on shutdown if WOL is disabledHeiner Kallweit
If WOL isn't enabled, then there's no need to enable wakeup from D3 on system shutdown. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: improve rtl_ocp_reg_failureHeiner Kallweit
Use WARN_ONCE here to get a call trace in case of a problem. This facilitates finding the offending code part. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: replace BUG_ON with WARN in _rtl_eri_writeHeiner Kallweit
Use WARN here to avoid stopping the system. In addition print the addr and mask values that triggered the warning. v2: - return on WARN to avoid an invalid register write Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09dpaa2-mac: remove a comment regarding pause settingsIoana Ciornei
The MC firmware takes these PAUSE/ASYM_PAUSE flags provided by the driver, transforms them back into rx/tx pause enablement status and applies them to hardware. We are not losing information by this transformation, thus remove the comment. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09dpaa2-mac: remove an unnecessary checkIoana Ciornei
The dpaa2-eth driver has phylink integration only if the connected dpmac object is in TYPE_PHY (aka the PCS/PHY etc link status is managed by Linux instead of the firmware). The check is thus unnecessary because the code path that reaches the .mac_link_up() callback is only with TYPE_PHY dpmac objects. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-28 07:35:34 +0000