| Age | Commit message (Collapse) | Author |
|---|
|
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts
register. The issue occurred because EP_CFG register was set twice
before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING
causes that controller increases internal counter holding the number
of reserved on-chip buffers. First time this register was updated in
function cdns3_ep_config before delegating SET_CONFIGURATION request
to class driver and again it was updated when class wanted to enable
endpoint. This patch fixes this issue by configuring endpoints
enabled by class driver in cdns3_gadget_ep_enable and others just
before status stage.
Cc: stable@vger.kernel.org#v5.8+
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-and-tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix max memory region size calculation (Matt)
- Restore ILK-M RPS support, restoring performance (Ville)
- Reject 90/270 degreerotated initial fbs (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030004442.GA146813@intel.com
|
|
Fixes an endian regression on older GPUs, a refcount overflow,
a migration fix and 3 display fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv6MOjtgzKchpis1XrZYmu7-6CaxnHVzJKOXPH62_em7tw@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
First round of drm-misc-fixes with a couple of leftovers from
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
|
|
While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
should also have been doing from the start
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
With this we try to detect if the endianess switch works and assume LE if
not. Suggested by Ben.
Fixes: 51c05340e407 ("drm/nouveau/device: detect if changing endianness failed")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Not entirely sure why this never came up when I originally tested this
(maybe some BIOSes already have this setup?) but the ->caps_init vfunc
appears to cause the display engine to throw an exception on driver
init, at least on my ThinkPad P72:
nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b
This is magic nvidia speak for "You need to have the DMA notifier offset
programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix
this by doing that, and also perform an update afterwards to prevent
racing with the GPU when reading capabilities.
v2:
* Don't just program the DMA notifier offset, make sure to actually
perform an update
v3:
* Don't call UPDATE()
* Actually read the correct notifier fields, as apparently the
CAPABILITIES_DONE field lives in a different location than the main
NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different
CAPABILITIES_DONE field then pre-907d cards.
v4:
* Don't forget to check the return value of core507d_read_caps()
v5:
* Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY
* Disable notifier after calling GetCapabilities()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 4a2cb4181b07 ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
K2G devices still only use single parameter for power-domains property,
so check for this properly in the driver. Without this, every peripheral
fails to probe resulting in boot failure.
Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release regressions:
- r8169: fix forced threading conflicting with other shared
interrupts; we tried to fix the use of raise_softirq_irqoff from an
IRQ handler on RT by forcing hard irqs, but this driver shares
legacy PCI IRQs so drop the _irqoff() instead
- tipc: fix memory leak caused by a recent syzbot report fix to
tipc_buf_append()
Current release - bugs in new features:
- devlink: Unlock on error in dumpit() and fix some error codes
- net/smc: fix null pointer dereference in smc_listen_decline()
Previous release - regressions:
- tcp: Prevent low rmem stalls with SO_RCVLOWAT.
- net: protect tcf_block_unbind with block lock
- ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
to only send legal frames to the hypervisor was too strict
- net: hns3: Clear the CMDQ registers before unmapping BAR region;
incorrect cleanup order was leading to a crash
- bnxt_en - handful of fixes to fixes:
- Send HWRM_FUNC_RESET fw command unconditionally, even if there
are PCIe errors being reported
- Check abort error state in bnxt_open_nic().
- Invoke cancel_delayed_work_sync() for PFs also.
- Fix regression in workqueue cleanup logic in bnxt_remove_one().
- mlxsw: Only advertise link modes supported by both driver and
device, after removal of 56G support from the driver 56G was not
cleared from advertised modes
- net/smc: fix suppressed return code
Previous release - always broken:
- netem: fix zero division in tabledist, caused by integer overflow
- bnxt_en: Re-write PCI BARs after PCI fatal error.
- cxgb4: set up filter action after rewrites
- net: ipa: command payloads already mapped
Misc:
- s390/ism: fix incorrect system EID, it's okay to change since it
was added in current release
- vsock: use ns_capable_noaudit() on socket create to suppress false
positive audit messages"
* tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
r8169: fix issue with forced threading in combination with shared interrupts
netem: fix zero division in tabledist
ibmvnic: fix ibmvnic_set_mac
mptcp: add missing memory scheduling in the rx path
tipc: fix memory leak caused by tipc_buf_append()
gtp: fix an use-before-init in gtp_newlink()
net: protect tcf_block_unbind with block lock
ibmveth: Fix use of ibmveth in a bridge.
net/sched: act_mpls: Add softdep on mpls_gso.ko
ravb: Fix bit fields checking in ravb_hwtstamp_get()
devlink: Unlock on error in dumpit()
devlink: Fix some error codes
chelsio/chtls: fix memory leaks in CPL handlers
chelsio/chtls: fix deadlock issue
net: hns3: Clear the CMDQ registers before unmapping BAR region
bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
bnxt_en: Check abort error state in bnxt_open_nic().
bnxt_en: Re-write PCI BARs after PCI fatal error.
bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
...
|
|
With LOCKDEP enabled, CTI driver triggers the following splat due
to uninitialized lock class for dynamically allocated attribute
objects.
[ 5.372901] coresight etm0: CPU0: ETM v4.0 initialized
[ 5.376694] coresight etm1: CPU1: ETM v4.0 initialized
[ 5.380785] coresight etm2: CPU2: ETM v4.0 initialized
[ 5.385851] coresight etm3: CPU3: ETM v4.0 initialized
[ 5.389808] BUG: key ffff00000564a798 has not been registered!
[ 5.392456] ------------[ cut here ]------------
[ 5.398195] DEBUG_LOCKS_WARN_ON(1)
[ 5.398233] WARNING: CPU: 1 PID: 32 at kernel/locking/lockdep.c:4623 lockdep_init_map_waits+0x14c/0x260
[ 5.406149] Modules linked in:
[ 5.415411] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.9.0-12034-gbbe85027ce80 #51
[ 5.418553] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 5.426453] Workqueue: events amba_deferred_retry_func
[ 5.433299] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 5.438252] pc : lockdep_init_map_waits+0x14c/0x260
[ 5.444410] lr : lockdep_init_map_waits+0x14c/0x260
[ 5.449007] sp : ffff800012bbb720
...
[ 5.531561] Call trace:
[ 5.536847] lockdep_init_map_waits+0x14c/0x260
[ 5.539027] __kernfs_create_file+0xa8/0x1c8
[ 5.543539] sysfs_add_file_mode_ns+0xd0/0x208
[ 5.548054] internal_create_group+0x118/0x3c8
[ 5.552307] internal_create_groups+0x58/0xb8
[ 5.556733] sysfs_create_groups+0x2c/0x38
[ 5.561160] device_add+0x2d8/0x768
[ 5.565148] device_register+0x28/0x38
[ 5.568537] coresight_register+0xf8/0x320
[ 5.572358] cti_probe+0x1b0/0x3f0
...
Fix this by initializing the attributes when they are allocated.
Fixes: 3c5597e39812 ("coresight: cti: Add connection information to sysfs")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201029164559.1268531-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit [bb1860efc817] changed the sink handling code introducing an
uninitialised pointer bug. This results in the default sink selection
failing.
Prior to commit:
static void etm_setup_aux(...)
<snip>
struct coresight_device *sink;
<snip>
/* First get the selected sink from user space. */
if (event->attr.config2) {
id = (u32)event->attr.config2;
sink = coresight_get_sink_by_id(id);
} else {
sink = coresight_get_enabled_sink(true);
}
<ctd>
*sink always initialised - possibly to NULL which triggers the
automatic sink selection.
After commit:
static void etm_setup_aux(...)
<snip>
struct coresight_device *sink;
<snip>
/* First get the selected sink from user space. */
if (event->attr.config2) {
id = (u32)event->attr.config2;
sink = coresight_get_sink_by_id(id);
}
<ctd>
*sink pointer uninitialised when not providing a sink on the perf command
line. This breaks later checks to enable automatic sink selection.
Fixes: bb1860efc817 ("coresight: etm: perf: Sink selection using sysfs is deprecated")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201029164559.1268531-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"The good news is people are testing rc1 in the RDMA world - the bad
news is testing of the for-next area is not as good as I had hoped, as
we really should have caught at least the rdma_connect_locked() issue
before now.
Notable merge window regressions that didn't get caught/fixed in time
for rc1:
- Fix in kernel users of rxe, they were broken by the rapid fix to
undo the uABI breakage in rxe from another patch
- EFA userspace needs to read the GID table but was broken with the
new GID table logic
- Fix user triggerable deadlock in mlx5 using devlink reload
- Fix deadlock in several ULPs using rdma_connect from the CM handler
callbacks
- Memory leak in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: Fix memory leak in iWARP CM
RDMA: Add rdma_connect_locked()
RDMA/uverbs: Fix false error in query gid IOCTL
RDMA/mlx5: Fix devlink deadlock on net namespace deletion
RDMA/rxe: Fix small problem in network_type patch
|
|
As reported by Serge flag IRQF_NO_THREAD causes an error if the
interrupt is actually shared and the other driver(s) don't have this
flag set. This situation can occur if a PCI(e) legacy interrupt is
used in combination with forced threading.
There's no good way to deal with this properly, therefore we have to
remove flag IRQF_NO_THREAD. For fixing the original forced threading
issue switch to napi_schedule().
Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading")
Link: https://www.spinics.net/lists/netdev/msg694960.html
Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski brought up a concern in ibmvnic_set_mac().
ibmvnic_set_mac() does this:
ether_addr_copy(adapter->mac_addr, addr->sa_data);
if (adapter->state != VNIC_PROBED)
rc = __ibmvnic_set_mac(netdev, addr->sa_data);
So if state == VNIC_PROBED, the user can assign an invalid address to
adapter->mac_addr, and ibmvnic_set_mac() will still return 0.
The fix is to validate ethernet address at the beginning of
ibmvnic_set_mac(), and move the ether_addr_copy to
the case of "adapter->state != VNIC_PROBED".
Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201027220456.71450-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't currently handle the initial fb readout correctly
for 90/270 degree rotated scanout. Reject it.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020194330.28568-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit a40a8305a732f4ecc2186ac7ca132ba062ed770d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().
Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 2bf06370bcfb0dea5655e9a5ad460c7f7dca7739)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e44 ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
(cherry picked from commit 83ebef47f8ebe320d5c5673db82f9903a4f40a69)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
*_pdp_find() from gtp_encap_recv() would trigger a crash when a peer
sends GTP packets while creating new GTP device.
RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp]
<SNIP>
Call Trace:
<IRQ>
gtp_encap_recv+0xc2/0x2e0 [gtp]
? gtp1_pdp_find.isra.0+0x90/0x90 [gtp]
udp_queue_rcv_one_skb+0x1fe/0x530
udp_queue_rcv_skb+0x40/0x1b0
udp_unicast_rcv_skb.isra.0+0x78/0x90
__udp4_lib_rcv+0x5af/0xc70
udp_rcv+0x1a/0x20
ip_protocol_deliver_rcu+0xc5/0x1b0
ip_local_deliver_finish+0x48/0x50
ip_local_deliver+0xe5/0xf0
? ip_protocol_deliver_rcu+0x1b0/0x1b0
gtp_encap_enable() should be called after gtp_hastable_new() otherwise
*_pdp_find() will access the uninitialized hash table.
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com>
Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On r8a7791/koelsch and shmobile_defconfig, PCIe probing fails with:
rcar-pcie fe000000.pcie: Adjusted size 0x0 invalid
rcar-pcie: probe of fe000000.pcie failed with error -22
of_dma_get_range() returns the following map:
cpu_start 0x40000000 dma_start 0x40000000 size 0x080000000 offset 0
cpu_start 0x00000000 dma_start 0x00000000 size 0x100000000 offset 0
If CONFIG_ARM_LPAE=n, dma_addr_t is 32-bit. Hence when assigning
r->dma_start + r->size to dma_end, this value will be truncated to
32-bit, yielding zero when processing the second table entry.
Consequently, both dma_start and dma_end will be zero, leading to a zero
size.
Fix this by changing the dma_start and dma_end variables from dma_addr_t
to u64.
Fixes: e0d072782c734d27 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull NVMe fixes from Christoph:
"nvme updates for 5.10:
- improve zone revalidation (Keith Busch)
- gracefully handle zero length messages in nvme-rdma (zhenwei pi)
- nvme-fc error handling fixes (James Smart)
- nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)"
* tag 'nvme-5.10-2020-10-29' of git://git.infradead.org/nvme:
nvmet: fix a NULL pointer dereference when tracing the flush command
nvme-fc: remove nvme_fc_terminate_io()
nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery
nvme-fc: remove err_work work item
nvme-fc: track error_recovery while connecting
nvme-rdma: handle unexpected nvme completion data length
nvme: ignore zone validate errors on subsequent scans
|
|
Use platform_get_resource() to fetch the memory resource and
platform_get_irq_optional() to get optional IRQ instead of
open-coded variants.
IRQ is not supposed to be changed at runtime, so there is
no functional change in ace_fsm_yieldirq().
On the other hand we now take first resources instead of last ones
to proceed. I can't imagine how broken should be firmware to have
a garbage in the first resource slots. But if it the case, it needs
to be documented.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the zoned mode is enabled in null_blk, Serializing read, write
and zone management operations for each zone is necessary to protect
device level information for managing zone resources (zone open and
closed counters) as well as each zone condition and write pointer
position. Commit 35bc10b2eafb ("null_blk: synchronization fix for
zoned device") introduced a spinlock to implement this serialization.
However, when memory backing is also enabled, GFP_NOIO memory
allocations are executed under the spinlock, resulting in might_sleep()
warnings. Furthermore, the zone_lock spinlock is locked/unlocked using
spin_lock_irq/spin_unlock_irq, similarly to the memory backing code with
the nullb->lock spinlock. This nested use of irq locks wrecks the irq
enabled/disabled state.
Fix all this by introducing a bitmap for per-zone lock, with locking
implemented using wait_on_bit_lock_io() and clear_and_wake_up_bit().
This locking mechanism allows keeping a zone locked while executing
null_process_cmd(), serializing all operations to the zone while
allowing to sleep during memory backing allocation with GFP_NOIO.
Device level zone resource management information is protected using
a spinlock which is not held while executing null_process_cmd();
Fixes: 35bc10b2eafb ("null_blk: synchronization fix for zoned device")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the cae of the REQ_OP_ZONE_RESET_ALL operation, the command sector is
ignored and the operation is applied to all sequential zones. For these
commands, tracing the effect of the command using the command sector to
determine the target zone is thus incorrect.
Fix null_zone_mgmt() zone condition tracing in the case of
REQ_OP_ZONE_RESET_ALL to apply tracing to all sequential zones that are
not already empty.
Fixes: 766c3297d7e1 ("null_blk: add trace in null_blk_zoned.c")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mounted NBD device can be resized, one use case is rbd-nbd.
Fix the issue by setting up default block size, then not touch it
in nbd_size_update() any more. This kind of usage is aligned with loop
which has same use case too.
Cc: stable@vger.kernel.org
Fixes: c8a83a6b54d0 ("nbd: Use set_blocksize() to set device blocksize")
Reported-by: lining <lining2020x@163.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jan Kara <jack@suse.cz>
Tested-by: lining <lining2020x@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.
In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The code:
trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size)
| TRB_LEN(length));
TRB_BURST_LEN(priv_ep->trb_burst_size) may be overflow for int 32 if
priv_ep->trb_burst_size is equal or larger than 0x80;
Below is the Coverity warning:
sign_extension: Suspicious implicit sign extension: priv_ep->trb_burst_size
with type u8 (8 bits, unsigned) is promoted in priv_ep->trb_burst_size << 24
to type int (32 bits, signed), then sign-extended to type unsigned long
(64 bits, unsigned). If priv_ep->trb_burst_size << 24 is greater than 0x7FFFFFFF,
the upper bits of the result will all be 1.
To fix it, it needs to add an explicit cast to unsigned int type for ((p) << 24).
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
Most of the helpers to retrieve vc4 structures from the DRM base structures
rely on the fact that the first member of the vc4 structure is the DRM one
and just cast the pointers between them.
However, this is pretty fragile especially since there's no check to make
sure that the DRM structure is indeed at the offset 0 in the structure, so
let's use container_of to make it more robust.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
|
|
Since the components for a given device in ASoC are identified by their
name, it makes sense to add one even though it's not strictly necessary.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
|
|
When built as a loadable module, coresight now causes a warning about
missing license information.
WARNING: modpost: missing MODULE_LICENSE() in drivers/hwtracing/coresight/coresight.o
Fixes: 8e264c52e1da ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201026160205.3704789-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock)
creates a lock dependecy that could possibly deadlock.
Lockdep warns:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.10.0-rc1pdx86+ #8 Not tainted
-----------------------------------------------------
systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0
and this task is already holding:
ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810
which would create a new lock dependency:
(&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2}
Create the files a bit later after lock is released.
Fixes: 673d74683627 ("usb: xhci: add debugfs support for ep with stream")
CC: Li Jun <jun.li@nxp.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this,
need to disable a bit which is enable in sparse controller.
Cc: stable@vger.kernel.org #v4.19+
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An incorrect sizeof() is being used, sizeof(rhub->ports) is not
correct, it should be sizeof(*rhub->ports). This bug did not
cause any issues because it just so happens the sizes are the same.
Fixes: bcaa9d5c5900 ("xhci: Create new structures to store xhci port information")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
chip->port_type and chip->pwr_opmode are enums and when GCC considers them
as unsigned, the conditions are never met.
This patch takes advantage of the ret variable and fixes the following
warnings:
drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero.
drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When stusb160x driver is built as a module, no modalias information is
available, and it prevents the module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fix this issue.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It seems that the function was renamed. kernel-doc markup
should follow it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/dffad16d4d6427d7d0fc89797e4126fe7c69d5de.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e114 ("libata: Fix retrieving of
active qcs").
Fixes: 28361c403683 ("libata: add extra internal command")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which
modify the irqflags") adds a workaround for DSDTs with a _LID method
which play tricks with the irqflags, assuming that the OS is using
an irq-type of IRQ_TYPE_LEVEL_LOW.
Now that this workaround is in place, we no longer need to disable the
lid functionality on the Acer SW5-012.
Fixes: 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fixes memory leak in iWARP CM
Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions")
Link: https://lore.kernel.org/r/20201021115008.28138-1-palok@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In commit 5ba127878722, we shuffled with the check of 'perm'. But my
brain somehow inverted the condition in 'do_unimap_ioctl' (I thought
it is ||, not &&), so GIO_UNIMAP stopped working completely.
Move the 'perm' checks back to do_unimap_ioctl and do them right again.
In fact, this reverts this part of code to the pre-5ba127878722 state.
Except 'perm' is now a bool.
Fixes: 5ba127878722 ("vt_ioctl: move perm checks level up")
Cc: stable@vger.kernel.org
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201026055419.30518-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
for (a = 0; a < 2; a++) {
struct kbsentry kbs = {};
strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
ioctl(fd, KDSKBSENT, &kbs);
}
When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888
So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.
It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.
Note that the program above needs at least CAP_SYS_TTY_CONFIG.
This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.
Likely fixes CVE-2020-25656.
Cc: <stable@vger.kernel.org>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.
The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.
The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prior to the commit that this one fixes, the FIFO size was derived from
the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following
formula:
TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1)
The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A
LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ
being equal to 4, and in the register description for LPUARTx_FIFO, it
shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011",
even though these registers read as "101" in reality.
And when LPUART on LS1021A was working, the "101" value did correspond
to "16 datawords", by applying the formula above, even though the
documentation is wrong again (!!!!) and says that "101" means 64 datawords
(hint: it doesn't).
So the "new" formula created by commit f77ebb241ce0 has all the premises
of being wrong for LS1021A, because it relied only on false data and no
actual experimentation.
Interestingly, in commit c2f448cff22a ("tty: serial: fsl_lpuart: add
LS1028A support"), Michael Walle applied a workaround to this by manually
setting the FIFO widths for LS1028A. It looks like the same values are
used by LS1021A as well, in fact.
When the driver thinks that it has a deeper FIFO than it really has,
getty (user space) output gets truncated.
Many thanks to Michael for pointing out where to look.
Fixes: f77ebb241ce0 ("tty: serial: fsl_lpuart: correct the FIFO depth size")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com
Reviewed-by：Fugang Duan <fugang.duan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 293f89959483 ("tty: serial: 21285: stop using the unused[]
variable from struct uart_port") introduced a bug which stops the
transmit interrupt being disabled when there are no characters to
transmit - disabling the transmit interrupt at the interrupt controller
is the only way to stop an interrupt storm. If this interrupt is not
disabled when there are no transmit characters, we end up with an
interrupt storm which prevents the machine making forward progress.
Fixes: 293f89959483 ("tty: serial: 21285: stop using the unused[] variable from struct uart_port")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/E1kU4GS-0006lE-OO@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
