| Age | Commit message (Collapse) | Author |
|---|
|
We noticed a high number of rx_discards_phy events on certain servers while
running `ethtool -S`. However, this critical counter is not currently
included in the standard /proc/net/dev statistics file, making it difficult
to monitor effectively—especially given the diversity of vendors across a
large fleet of servers.
Let's report it via the standard rx_dropped metric.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241210022706.6665-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
wait_for_complete_timeout() expects a timeout in jiffies. With the
driver, some call sites converted QCA8K_ETHERNET_TIMEOUT to jiffies,
others did not. Make the code consistent by changes the #define to
include a call to msecs_to_jiffies, and remove all other calls to
msecs_to_jiffies.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: from Christian would be very welcome.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add nway_reset supported in this module
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216040532.1566229-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sometimes, if the port doesn't work, we can try to fix it by resetting it.
This patch supports reset triggered by ethtool or FLR of PCIe, For example:
ethtool --reset eth0 dedicated
echo 1 > /sys/bus/pci/devices/0000\:83\:00.1/reset
We hope that the reset can be performed only when the port is down,
and the port cannot be up during the reset.
Therefore, the entire reset process is protected by the rtnl lock.
After the reset is complete, the hardware registers are restored
to their default values. Therefore, some rebuild operations are
required to rewrite the user configuration to the registers.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MAC can automatically send or respond to pause frames.
This patch supports the function of enabling pause frames
by using ethtool.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216040532.1566229-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dump register is an effective way to analyze problems.
To ensure code flexibility, each register contains the type,
offset, and value information. The ethtool does the pretty print
based on these information.
The driver can dynamically add or delete registers that need to be dumped
in the future because information such as type and offset is contained.
ethtool always can do pretty print.
With the ethtool of a specific version,
the following effects are achieved:
[root@localhost sjj]# ./ethtool -d enp131s0f1
[SPEC] VALID [0x0000]: 0x00000001
[SPEC] EVENT_REQ [0x0004]: 0x00000000
[SPEC] MAC_ID [0x0008]: 0x00000002
[SPEC] PHY_ADDR [0x000c]: 0x00000002
[SPEC] MAC_ADDR_L [0x0010]: 0x00000808
[SPEC] MAC_ADDR_H [0x0014]: 0x08080802
[SPEC] UC_MAX_NUM [0x0018]: 0x00000004
[SPEC] MAX_MTU [0x0028]: 0x00000fc2
[SPEC] MIN_MTU [0x002c]: 0x00000100
[SPEC] TX_FIFO_NUM [0x0030]: 0x00000040
[SPEC] RX_FIFO_NUM [0x0034]: 0x0000007f
[SPEC] VLAN_LAYERS [0x0038]: 0x00000002
[MDIO] COMMAND_REG [0x0000]: 0x0000185f
[MDIO] ADDR_REG [0x0004]: 0x00000000
[MDIO] WDATA_REG [0x0008]: 0x0000a000
[MDIO] RDATA_REG [0x000c]: 0x00000000
[MDIO] STA_REG [0x0010]: 0x00000000
[GMAC] DUPLEX_TYPE [0x0008]: 0x00000001
[GMAC] FD_FC_TYPE [0x000c]: 0x00008808
[GMAC] FC_TX_TIMER [0x001c]: 0x000000ff
[GMAC] FD_FC_ADDR_LOW [0x0020]: 0xc2000001
[GMAC] FD_FC_ADDR_HIGH [0x0024]: 0x00000180
[GMAC] MAX_FRM_SIZE [0x003c]: 0x000005f6
[GMAC] PORT_MODE [0x0040]: 0x00000002
[GMAC] PORT_EN [0x0044]: 0x00000006
...
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC supports filtering unmatched unicast packets according to
the MAC address table. This patch adds the support for
unicast frame filtering.
To support automatic restoration of MAC entries
after reset, the driver saves a copy of MAC entries in the driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20241216040532.1566229-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the driver requested three interrupts: "tx", "rx", "err".
The err interrupt is a summary interrupt. We distinguish
different errors based on the status register and mask.
With "cat /proc/interrupts | grep hibmcge",
we can't distinguish the detailed cause of the error,
so we added this file to debugfs.
the following effects are achieved:
[root@localhost sjj]# cat /sys/kernel/debug/hibmcge/0000\:83\:00.1/irq_info
RX : enabled: true , logged: false, count: 0
TX : enabled: true , logged: false, count: 0
MAC_MII_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_TX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_TX_FIFO_ERR : enabled: false, logged: true , count: 0
SRAM_PARITY_ERR : enabled: true , logged: true , count: 0
TX_AHB_ERR : enabled: true , logged: true , count: 0
RX_BUF_AVL : enabled: true , logged: false, count: 0
REL_BUF_ERR : enabled: true , logged: true , count: 0
TXCFG_AVL : enabled: true , logged: false, count: 0
TX_DROP : enabled: true , logged: false, count: 0
RX_DROP : enabled: true , logged: false, count: 0
RX_AHB_ERR : enabled: true , logged: true , count: 0
MAC_FIFO_ERR : enabled: true , logged: false, count: 0
RBREQ_ERR : enabled: true , logged: false, count: 0
WE_ERR : enabled: true , logged: false, count: 0
The irq framework of hibmcge driver also includes tx/rx interrupts.
Therefore, TX and RX are not moved separately form this file.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch initializes debugfs and creates root directory
for each device. The tx_ring and rx_ring debugfs files
are implemented together.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance error handling in Wake-on-LAN (WoL) operations:
- Log a warning in `lan78xx_get_wol` if `lan78xx_read_reg` fails.
- Check and handle errors from `device_set_wakeup_enable` and
`phy_ethtool_set_wol` in `lan78xx_set_wol`.
- Ensure proper cleanup with a unified error handling path.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216120941.1690908-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove PHY register handling from `lan78xx_get_regs` and
`lan78xx_get_regs_len`. Since the controller can have different PHYs
attached, the first 32 registers are not universally relevant or the
most interesting. Simplify the implementation to focus on MAC and device
registers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename `phy_mutex` to `mdiobus_mutex` for clarity, as the mutex protects
MDIO bus access rather than PHY-specific operations. Update all
references to ensure consistency.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the generic `done` label to the action-specific `exit_unlock`
label in `lan78xx_mac_reset`. This improves clarity by indicating the
specific cleanup action (mutex unlock) and aligns with best practices
for error handling and cleanup labels.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update lan78xx_stop_hw to return -ETIMEDOUT instead of -ETIME when
a timeout occurs. While -ETIME indicates a general timer expiration,
-ETIMEDOUT is more commonly used for signaling operation timeouts and
provides better consistency with standard error handling in the driver.
The -ETIME checks in tx_complete() and rx_complete() are unrelated to
this error handling change. In these functions, the error values are derived
from urb->status, which reflects USB transfer errors. The error value from
lan78xx_stop_hw will be exposed in the following cases:
- usb_driver::suspend
- net_device_ops::ndo_stop (potentially, though currently the return value
is not used).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_get_regs` to handle errors during register and PHY
reads. Log warnings for failed reads and exit the function early if an
error occurs. Drop all previously logged registers to signal
inconsistent readings to the user space. This ensures that invalid data
is not returned to users.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are close to removing page->index. Use page->private instead, which
is least likely to be removed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20241216155124.3114-1-willy@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Benefit from the recent conversion of the driver to NAPI and enable GRO
support through the use of napi_gro_receive(). Pass the NAPI pointer
from the bus driver (mlxsw_pci) to the switch driver (mlxsw_spectrum)
through the skb control block where various packet metadata is already
encoded.
The main motivation is to improve forwarding performance through the use
of GRO fraglist [1]. In my testing, when the forwarding data path is
simple (routing between two ports) there is not much difference in
forwarding performance between GRO disabled and GRO enabled with
fraglist.
The improvement becomes more noticeable as the data path becomes more
complex since it is traversed less times with GRO enabled. For example,
with 10 ingress and 10 egress flower filters with different priorities
on the two ports between which routing is performed, there is an
improvement of about 140% in forwarded bandwidth.
[1] https://lore.kernel.org/netdev/20200125102645.4782-1-steffen.klassert@secunet.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/21258fe55f608ccf1ee2783a5a4534220af28903.1734354812.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-4-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-2-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
[hkallweit1@gmail.com: rebased after adjusted version numbering]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/75e5e9ec-d01f-43ac-b0f4-e7456baf18d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust version numbering for RTL8126, so that it doesn't overlap with
new RTL8125 versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6a354364-20e9-48ad-a198-468264288757@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next 2024-12-16
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add device cap abs_native_port_num
net/mlx5: qos: Add ifc support for cross-esw scheduling
net/mlx5: Add support for new scheduling elements
net/mlx5: Add ConnectX-8 device to ifc
net/mlx5: ifc: Reorganize mlx5_ifc_flow_table_context_bits
====================
Link: https://patch.msgid.link/20241216124028.973763-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify framer_provider_simple_of_xlate() implementation by API
class_find_device_by_of_node().
Also correct comments to mark its parameter @dev as unused instead of
@args in passing.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213-net_fix-v2-1-6d06130d630f@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://patch.msgid.link/20241212-netdev-converge-secs-to-jiffies-v4-1-6dac97a6d6ab@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When DCB is disabled, the pfc_en struct member cannot be accessed:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_is_pfc_enabled':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:22:48: error: 'struct otx2_nic' has no member named 'pfc_en'
22 | return IS_ENABLED(CONFIG_DCB) && !!pfvf->pfc_en;
| ^~
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_nix_config_bp':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:1755:33: error: 'IEEE_8021QAZ_MAX_TCS' undeclared (first use in this function)
1755 | req->chan_cnt = IEEE_8021QAZ_MAX_TCS;
| ^~~~~~~~~~~~~~~~~~~~
Move the member out of the #ifdef block to avoid putting back another
check in the source file and add the missing include file unconditionally.
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213083228.2645757-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the empty and unused nb_work and associated
ionic_lif_notify_work() function.
v2: separated from previous net patch
Link: https://lore.kernel.org/netdev/20241210174828.69525-2-shannon.nelson@amd.com/
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241212212042.9348-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit aa58bec064ab1622 ("net: ethernet: oa_tc6: implement register
write operation") introduced a library that implements the OPEN Alliance
TC6 10BASE-T1x MAC-PHY Serial Interface protocol for supporting
10BASE-T1x MAC-PHYs.
There is no need to ask the user about enabling this library, as all
drivers that use it select the OA_TC6 symbol. Hence make the symbol
invisible, unless when compile-testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3b600550745af10ab7d7c3526353931c1d39f641.1733994552.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHY driver
It seems that phylink does not support driving PHYs in SFP modules using
the Generic PHY or Generic Clause 45 PHY driver. I've come to this
conclusion after analyzing these facts:
- sfp_sm_probe_phy(), who is our caller here, first calls
phy_device_register() and then sfp_add_phy() -> ... ->
phylink_sfp_connect_phy().
- phydev->supported is populated by phy_probe()
- phy_probe() is usually called synchronously from phy_device_register()
via phy_bus_match(), if a precise device driver is found for the PHY.
In that case, phydev->supported has a good chance of being set to a
non-zero mask.
- There is an exceptional case for the PHYs for which phy_bus_match()
didn't find a driver. Those devices sit for a while without a driver,
then phy_attach_direct() force-binds the genphy_c45_driver or
genphy_driver to them. Again, this triggers phy_probe() and renders
a good chance of phydev->supported being populated, assuming
compatibility with genphy_read_abilities() or
genphy_c45_pma_read_abilities().
- phylink_sfp_config_phy() does not support the exceptional case of
retrieving phydev->supported from the Generic PHY driver, due to its
code flow. It expects the phydev->supported mask to already be
non-empty, because it first calls phylink_validate() on it, and only
calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy()
-> phy_attach_direct() has no chance of running.
It is not my wish to change the state of affairs by altering the code
flow, but merely to document the limitation rather than have the current
unspecific error:
[ 61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL
[ 61.820743] sfp sfp: sfp_add_phy failed: -EINVAL
On the premise that an empty phydev->supported is going to make
phylink_validate() fail anyway, and that this is caused by a missing PHY
driver, it would be more informative to single out that case, undercut
the entire phylink_sfp_config_phy() call, including phylink_validate(),
and print a more specific message for this common gotcha:
[ 37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded
[ 37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 37.108047] sfp sfp: sfp_add_phy failed: -EINVAL
Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The assignment was accidentally aligned to the string one line before.
This was raised by the kernel bot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412101739.umNl7yYu-lkp@intel.com/
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212115910.2485851-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO2 pin on the DP83822 can be configured as clock output. Add support
for configuration via DT.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dwmac510_tc_ops and dwxgmac_tc_ops are completely identical,
keep dwmac510_tc_ops to provide better backward compatibility.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241212033325.282817-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.
The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9896 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.
Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Teach the driver to recognize and decode the sfp pid
SFF8024_ID_QSFP_PLUS_CMIS correctly.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add higher speed defines to the ionic_if.h API and decode them
in the ethtool get_link_ksettings callback.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of reporting -EINVAL when IONIC_RC_ENOSUPP is returned use
the -EOPNOTSUPP value. This aligns better since the FW only returns
IONIC_RC_ENOSUPP when operations aren't supported not when invalid
values are used.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace when ETH_HLEN and VLAN_HLEN are used together with
VLAN_ETH_HLEN since it's the same value and uses 1 define
instead of 2.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the firmware has learned how to properly report
the asic type id, add the values to our interface file.
The sharp-eyed reviewers will catch that the CAPRI value
changed here from 0 to 1. This comes with the FW actually
defining it correctly. This is safe for us to change as
nothing actually uses that value yet.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES
in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL &
NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features.
Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similarly as with bonding, fix the calculation of vlan_features to reuse
netdev_base_features() in order derive the set in the same way as
ndo_fix_features before iterating through the slave devices to refine the
feature set.
Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Drivers like mlx5 expose NIC's vlan_features such as
NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are
later not propagated when the underlying devices are bonded and
a vlan device created on top of the bond.
Right now, the more cumbersome workaround for this is to create
the vlan on top of the mlx5 and then enslave the vlan devices
to a bond.
To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES
such that bond_compute_features() can probe and propagate the
vlan_features from the slave devices up to the vlan device.
Given the following bond:
# ethtool -i enp2s0f{0,1}np{0,1}
driver: mlx5_core
[...]
# ethtool -k enp2s0f0np0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k enp2s0f1np1 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: on
rx-udp-gro-forwarding: off
# ethtool -k bond0 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Before:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: off [requested on]
tx-udp_tnl-csum-segmentation: off [requested on]
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
After:
# ethtool -k bond0.100 | grep udp
tx-udp_tnl-segmentation: on
tx-udp_tnl-csum-segmentation: on
tx-udp-segmentation: on
rx-udp_tunnel-port-offload: off [fixed]
rx-udp-gro-forwarding: off
Various users have run into this reporting performance issues when
configuring Cilium in vxlan tunneling mode and having the combination
of bond & vlan for the core devices connecting the Kubernetes cluster
to the outside world.
Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If a bonding device has slave devices, then the current logic to derive
the feature set for the master bond device is limited in that flags which
are fully supported by the underlying slave devices cannot be propagated
up to vlan devices which sit on top of bond devices. Instead, these get
blindly masked out via current NETIF_F_ALL_FOR_ALL logic.
vlan_features and mpls_features should reuse netdev_base_features() in
order derive the set in the same way as ndo_fix_features before iterating
through the slave devices to refine the feature set.
Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing")
Fixes: 2e770b507ccd ("net: bonding: Inherit MPLS features from slave devices")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().
Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the .support_eee() method by reusing the ksz_validate_eee()
method as a template, renaming the function, changing the return type
and values, and removing it from the ksz_set_mac_eee() and
ksz_get_mac_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL14Z-006cZs-6o@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
