summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-07rtl8187: make CTS-to-self protection workAndrea Merello
CTS protection was not working properly because the HW needs RTS flag to be asserted, and it need also RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8180: make CTS-to-self protection workAndrea Merello
CTS protection was not working properly because the HW still need RTS flag to be asserted, and it need also RTS rate field to be set with CTS-to-self rate and RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8180: report mac80211 short preamble RX flagAndrea Merello
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8187: report mac80211 short preamble RX flagAndrea Merello
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07ath9k: Allow platform override without EEPROM overrideHelmut Schaa
Add a new platform data flag "use_eeprom" that indicates that the eeprom found on the card itself should be used instead of the one present in the platform data. This allows to override the MAC address of a PCI card while preserving the eeprom data from the card itself. The default behavior is preserved. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: add HT operation IE in TDLS setup confirmAvinash Patil
This patch adds support to populate HT operatation IE in TDLS setup confirm command. This is required for setting wider bandwidths for TDLS operations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: disable TDLS link upon tear down eventAvinash Patil
This patch adds code to disable TDLS link upon reception of TDLS teardown event from peer. Teardown event can happen either because of TDLS teardown packet from peer or internal timeout configured during TDLS setup. Event is propogated to cfg80211 so that userspace application can take appropriate action. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: configure inactivity timeout for TDLS linkAvinash Patil
This patch adds configuration timeout for TDLS link. This is configuered at the time of TDLS link configuration. If TDLS link is inactive for more than timeout, FW will tear this link. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-06ath9k_hw: get QCA953x WMAC revision via platform_dataFelix Fietkau
The SREV register in the WMAC register space does not contain the chip revision, so it needs to be passed in from the kernel. With an updated kernel, this fixes tx gain table selection. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-06RTL8192CU: Increase max APFM_ONMAC polling countAndy Spencer
With certain hardware combinations the poll interval is exceeded before initialization completes. Tested on a MacBookPro10,1 using a Sabrent USB-A11N USB adapter. Signed-off-by: Andy Spencer <andy753421@ucla.edu> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-06ath9k: Advertise support for AP mode channel width changesRajkumar Manoharan
This will enable AP mode to change channel width dynamically based on 20/40 intolerance report sent by associated client. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-06ath9k: Prevent divide-by-zero upon bad beacon_interval.Ben Greear
A similar patch fixed crashes seen on an ath9k system when testing against a broken ath10k AP. This patch is slightly less protective, but probably will do the job and is less redundant. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rsi: Changing opcode for sta mode according to changes in firmwareJahnavi Meher
Signed-off-by: Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: fix worse EVM for 11b ratesRajkumar Manoharan
Adjust FIR filter co-efficients to improve EVM for 11b rates. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: update ar9300 initvalsRajkumar Manoharan
* rfsat gainchange hysteresis of rf_gain stuck with large interference present. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: N-PHY: complete radio 0x2056 setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting.Nickolay Ledovskikh
I was reading ath5k power setting code and noticed typing error in ath5k_hw_txpower function. Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX register. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30iwlegacy: Convert /n to \nJoe Perches
Use a newline character appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30wlcore: fix usage of platform_device_add_data()Christian Engelmayer
Coverity CID 986698 reports leakage of struct wlcore_platdev_data in the probe functions of both the SPI/SDIO interfaces. The structure passed to platform_device_add_data() is dynamically allocated and only freed in the error paths, however, platform_device_add_data() adds a copy of the platform specific data to the device. Move the temporary struct that is kmemdup'ed to the stack. This issue exists since afb43e6d (wlcore: remove if_ops from platform_data). Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtlwifi: rtl8723be: disable MSI interrupts modeAdam Lee
94010fa0dd07e8b904e7c6b6589f15573008ab15 ("rtlwifi: add MSI interrupts mode support") introduced MSI interrupts mode support, which seemed safe enough with RTL8188EE and RTL8723BE as RealTek's testing results, but some users reported their RTL8188EE modules could not connect to any wireless network after the MSI mode was enabled by Ubuntu 14.04. So, let's fallback to pin-based mode until rtlwifi's MSI support get good compatibility. BugLink: https://bugs.launchpad.net/bugs/1310512 Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30Revert "rtlwifi: rtl8188ee: enable MSI interrupts mode"Adam Lee
This reverts commit 2a54eb5e1476426ee639bbfbe179b52342a0d82c ("rtlwifi: rtl8188ee: enable MSI interrupts mode"). 94010fa0dd07e8b904e7c6b6589f15573008ab15 ("rtlwifi: add MSI interrupts mode support") introduced MSI interrupts mode support, which seemed safe enough with RTL8188EE and RTL8723BE as RealTek's testing results, but some users reported their RTL8188EE modules could not connect to any wireless network after the MSI mode was enabled by Ubuntu 14.04. So, let's fallback to pin-based mode until rtlwifi's MSI support get good compatibility. BugLink: https://bugs.launchpad.net/bugs/1310512 Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: don't pre-set radio_on variable to trueRafał Miłecki
Setting it to true during init doesn't seem to be any workaround while it can cause problems (not enabling radio due to belief it's enabled). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: use b43_software_rfkill helperRafał Miłecki
This removes dealing with pointers directly and allows tracking radio state with radio_on variable. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: bcma: respect GMODE (band choice) during core resetRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-30Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-04-28mac80211_hwsim: Advertise support for AP mode channel width changesJouni Malinen
mac80211 takes care of all the needed steps for hwsim, so indicate support for this capability. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-24Revert "mwifiex: add firmware dump feature for PCIe"John W. Linville
This reverts commit e050c76fcf49599c5b98e4614392dc87c69123a6. I'm not sure what crack pipe I was using when I merged this... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-24Bluetooth: Remove hci_h4 unused definesPoulain, Loic
H4 states are not used anymore. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2014-04-24Bluetooth: btmrvl: Fix btmrvl_send_module_cfg_cmd()Petri Gynther
Change subcmd parameter from int to u8 to match its use: btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1); Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-04-22b43: remove list of IEEE 802.11 devicesRafał Miłecki
This is the first step to remove leftover code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: ssb: refuse to support more than IEEE 802.11 coreRafał Miłecki
Some ancient Broadcom devices had one core per band, e.g.: ssb: Found chip with id 0x4306, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243) ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) This hardware model was dropped for newer devices handled by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: enable forgotten write of hw power adjust tableRafał Miłecki
We've implemented table calculation, but forgot to enable writing it in power setup function. By the way document table layout. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: fix selection of init & calib valuesRafał Miłecki
Logic in specs and our code was wrong. Init and calibration values for newer cards depend on radio revision, not PHY revision. To make code clearer, change tables names to include "radio" or "phy". Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: add init & calib values for radio 0x2056 rev 11Rafał Miłecki
They were extracted from MMIO dumps of 14e4:4353 and wl 6.30.223.141. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: prepare for rev 7+ RSSI calibrationRafał Miłecki
Mostly just add place for future code Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: implement RF control INTC for revs 7+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: implement reading support for radio 0x2057Rafał Miłecki
Bit 0x200 has been noticed in the following log: radio_read(0x02ca) -> 0x0000 radio_write(0x00ca) <- 0x0080 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: random updates and typo fixes all aroundRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: rev3+: complete workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: drop second noise variance tableRafał Miłecki
New Broadcom drivers don't upload it anymore. It was probably a copy & paste mistake in early N-PHY rev 3+ days. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: G-PHY: fix random mistakes to match specsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: enable aggregation for TID 6 and 7 streamsAmitkumar Karwar
Currently AMSDU and AMPDU aggregation is enabled for TID 0 to TID 5 streams. Lets enable it for remaining two streams also. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase tx/rx AMPDU window sizes for STA 11ac modeAmitkumar Karwar
This will help to aggregate more packets which yields better throughput results for 11ac chipsets. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase tx/rx AMPDU window sizes for STA 11n modeAmitkumar Karwar
This will help to aggregate more packets which yields better throughput results. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets. Separate file will be created at /var/log/fw_dump_* for each memory segment. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add fw_dump debugfs fileAmitkumar Karwar
This option be useful to dump firmware memory for debugging purpose. Actual code to dump firmware momory for SDIO and PCIe chipsets will be added later. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rt2x00: restore original beaconing stateStanislaw Gruszka
After changing local per interface beacon setting restore original global beaconing state. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: don't clear cmd_sent flag in timeout handlerAmitkumar Karwar
When command timeout occurs due to a firmware/hardware bug, there is no chance of next command being successful. We will keep cmd_sent flag on so that next command won't be sent to firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: fix IE parsing issuesAmitkumar Karwar
IE's are parsed from beacon buffer and stored locally using mwifiex_update_bss_desc_with_ie() function. Sometimes the local pointers point to the data inside IE, but while using them it is assumed that they are pointing to the IE itself. These issues are fixed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-04-26 05:33:06 +0000