| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the driver supports setting lanes to 1000BASEX, 2500BASEX,
10GKR. Complete the COMPHY modes list by adding two (already
supported) cases for lane 4.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Keep the exact same list of supported configurations but first try to
use the firmware's implementation. If it fails, try the legacy method:
Linux implementation.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[miquel.raynal@bootlin.com: adapt the content to the mainline driver]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Explicitly set the lane submode (enum) to a known invalid value.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
There is no public clock tree that implies such dependencies between
the MG/MG-core/AXI clocks and the COMPHY IP but accessing the COMPHY
registers while one of the three clocks are disabled stalls the CPU.
This happens if, for instance, the COMPHY driver probe is deferred
(eg. the USB Vbus regulator driver is not yet visible). The MVPP2
driver which also needs these clocks (among others) will
prepare/enable the clocks, then be deferred, and disable/unprepare
them. Next COMPHY lane to be configured would produce an infinite
stall.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
After commit "linux/bits.h: Add compile time sanity check of GENMASK
inputs" [1], arm64 defconfig builds started failing:
In file included from ../include/linux/bits.h:22,
from ../include/linux/bitops.h:5,
from ../include/linux/kernel.h:12,
from ../include/linux/clk.h:13,
from ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:9:
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c: In function 'inno_hdmi_phy_rk3328_power_on':
../include/linux/build_bug.h:16:45: error: negative width in bit-field '<anonymous>'
16 | #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); }))
| ^
../include/linux/bits.h:24:18: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
24 | ((unsigned long)BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
| ^~~~~~~~~~~~~~~~~
../include/linux/bits.h:39:3: note: in expansion of macro 'GENMASK_INPUT_CHECK'
39 | (GENMASK_INPUT_CHECK(high, low) + __GENMASK(high, low))
| ^~~~~~~~~~~~~~~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:24:42: note: in expansion of macro 'GENMASK'
24 | #define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
| ^~~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:201:50: note: in expansion of macro 'UPDATE'
201 | #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 9)
| ^~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:1046:26: note: in expansion of macro 'RK3328_TERM_RESISTOR_CALIB_SPEED_7_0'
1046 | inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As pointed out by Robin and Guenter, inno_write's val argument is an
8-bit value so having a mask larger than that doesn't make sense. This
also matches the rest of the *_7_0 macros in this driver.
[1]: https://lore.kernel.org/lkml/20190801230358.4193-2-rikard.falkeborn@gmail.com/
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
|
|
Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct
READY_STATUS poll break condition") I failed to conclude that the
PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
the PHY gets ready. Similar to the prior bug with UFS the code will
generally get past the check before the transition and thereby
"succeed".
Correct the name of the register used PCIe and USB3 PHYs, replace
mask_pcs_ready with a constant expression depending on the type of the
PHY and check for the appropriate ready state.
Cc: stable@vger.kernel.org
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Each iteration of for_each_available_child_of_node() puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence create a new label,
err_node_put, that puts the previous node (child) before returning the
required value. Also include the statement pm_runtime_disable() under
this label in order to avoid repetition among mid-loop return
conditions. Edit the mid-loop return statements to instead go to this
new label err_node_put.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The hardware manual should be revised, but the initial value of
VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware
clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically
when the hardware detects over-current signal from a USB power switch.
However, since the hardware doesn't have any registers which
indicates over-current, the driver cannot handle it at all. So, if
"is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS
register is cleared automatically, the channel cannot be used after
that.
To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0
to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware
detects over-current. (We assume a USB power switch itself protects
over-current and turns the VBUS off.)
This patch is inspired by a BSP patch from Kazuya Mizuguchi.
Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The regmap_node variable is still being used in the syscon_node_to_regmap()
call after the of_node_put() call, which may result in use-after-free.
Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
PHY configuration has been implemented in the firmware and accessed
through SMC calls. In the past, it worked magically if the bootloader
was correctly doing the initializations.
With up-to-date bindings, the kernel will need a recent firmware in
order to do the initializations himself (we assume people must update
their firmware along with their kernel).
People might not understand why IPs that were working correctly before
stopped to be probed suddendly. In this case, let's advise the users
to update their firmware with a visual warning.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Samsung PHY drivers control the power to the SoC core components needed by
their client devices (USB HCDs, SATA, camera ISP bridge, DP encoder) to
properly operate. Disabling PHYs in runtime usually causes the client
device to crash with external abort exception or similar issue due to lack
of API to notify clients about PHY removal. This patch removes the
possiblity to unbind Samsung Exynos PHY drivers in runtime.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Commit 36914111e682 ("drivers: phy: add calibrate method") added support
for generic phy_calibrate() method, but it didn't explain in detail when
such method is supposed to be called. Add some more documentation directly
to the phy.h to make it clean that it is intended to be called after every
host controller reset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Unconditionally include the lantiq subdirectory in the phy Makefile.
All drivers in there have their dependencies maintained. One of these
(optional) dependencies is COMPILE_TEST, however this can only be
evaluated when Kconfig scans the lantiq subdirectory.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The Lantiq VRX200 SoCs embed a PCIe PHY in the "sram" bus. Unlike most
other IP blocks on this SoC the register values are only 16-bit wide.
Like other IP blocks on this SoC the register values are in big endian.
The PHY embeds a PLL which can be configured in various modes. Only the
36MHz mode is supported for now, the other modes can be implemented when
there's a board which actually needs them. OpenWrt uses the out-of-tree
vendor driver and all supported boards there only need the 36MHz mode.
There are two input clocks:
- the "pdi" clock enables the register access
- the "phy" clock is the clock input and enables the internal PLL
There are two reset lines:
- "phy" resets the PHY itself
- the "pcie" reset line is shared between the PHY and the PCIe
controller
While the VRX200 SoC has only one PCIe controller and PHY the ARX300
uses two identical PCIe controllers and PHYs which are compatible with
the PCIe controller and PHY on VRX200.
Add a driver for this PHY so PCIe support can be enabled on these SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a
few other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
test_firmware: fix a memory leak bug
hpet: Fix division by zero in hpet_time_div()
eeprom: make older eeprom drivers select NVMEM_SYSFS
vmw_balloon: Remove Julien from the maintainers list
fpga-manager: altera-ps-spi: Fix build error
mei: me: add mule creek canyon (EHL) device ids
binder: prevent transactions to context manager from its own process.
binder: Set end of SG buffer area properly.
firmware: Fix missing inline
firmware: fix build errors in paged buffer handling code
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty/vt fixes:
- delete the netx-serial driver as the arch has been removed, no need
to keep the serial driver for it around either.
- vt console_lock fix to resolve a reported noisy warning at runtime
Both of these have been in linux-next with no reported issues"
* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Grab console_lock around con_is_bound in show_bind
tty: serial: netx: Delete driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for 5.3-rc2. All of these resolve some
reported issues, some more than others :)
Included in here is:
- xhci fix for an annoying issue with odd devices
- reversion of some usb251xb patches that should not have been merged
- usb pci quirk additions and fixups
- usb storage fix
- usb host controller error test fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
Revert "usb: usb251xb: Add US port lanes inversion property"
Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
usb: wusbcore: fix unbalanced get/put cluster_id
usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
usb-storage: Add a limitation for blk_queue_max_hw_sectors()
usb: pci-quirks: Minor cleanup for AMD PLL quirk
usb: pci-quirks: Correct AMD PLL quirk detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking fixes:
- Address the fallout of the rwsem rework. Missing ACQUIREs and a
sanity check to prevent a use-after-free
- Add missing checks for unitialized mutexes when mutex debugging is
enabled.
- Remove the bogus code in the generic SMP variant of
arch_futex_atomic_op_inuser()
- Fixup the #ifdeffery in lockdep to prevent compile warnings"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Test for initialized mutex
locking/lockdep: Clean up #ifdef checks
locking/lockdep: Hide unused 'class' variable
locking/rwsem: Add ACQUIRE comments
tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
locking/rwsem: Don't call owner_on_cpu() on read-owner
futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine fixes: The most important core one is the dma_max_mapping_size
fix that corrects the boot problem Gunter Roeck was having. A couple
of other driver only fixes are significant, like the cxgbi selector
support addition, the alua 2 second delay and the fdomain build fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
scsi: ibmvfc: fix WARN_ON during event pool release
scsi: fcoe: fix a typo
scsi: megaraid_sas: Make some functions static
scsi: megaraid_sas: fix panic on loading firmware crashdump
scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"
scsi: core: fix the dma_max_mapping_size call
scsi: fdomain: fix building pcmcia front-end
scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
|
|
Pull drm fixes from Daniel Vetter:
"Dave seems to collect an entire streak of things happening, so again
me typing pull summary.
Nothing nefarious here, most of the fixes are for new stuff or things
users won't see. The amd-display patches are a bit different, and very
much look like they should have at least some cc: stable tags. Might
be amd is a bit too comfortable with their internal tree and not
enough looking at upstream. Dave&me are looking into this, in case
something needs rectified with process here.
Also no intel fixes pull, but intel CI is general become rather good,
still I guess expect a notch more for -rc3.
Summary:
amdgpu:
- fixes for (new in 5.3) hw support (vega20, navi)
- disable RAS
- lots of display fixes all over (audio, DSC, dongle, clock mgr)
ttm:
- fix dma_free_attrs calls to appease dma debugging
msm:
- fixes for dma-api, locking debug and compiler splats
core:
- fix cmdline mode to not apply rotation if not specified (new in 5.3)
- compiler warn fix"
* tag 'drm-fixes-2019-07-26' of git://anongit.freedesktop.org/drm/drm: (46 commits)
drm/amd/display: Set enabled to false at start of audio disable
drm/amdgpu/smu: move fan rpm query into the asic specific code
drm/amd/powerplay: custom peak clock freq for navi10
drm: silence variable 'conn' set but not used
drm/msm: stop abusing dma_map/unmap for cache
drm/msm/dpu: Correct dpu encoder spinlock initialization
drm/msm: correct NULL pointer dereference in context_init
drm/amd/display: handle active dongle port type is DP++ or DP case
drm/amd/display: do not read link setting if edp not connected
drm/amd/display: Increase size of audios array
drm/amd/display: drop ASSERT() if eDP panel is not connected
drm/amd/display: Only enable audio if speaker allocation exists
drm/amd/display: Fix dc_create failure handling and 666 color depths
drm/amd/display: allocate 4 ddc engines for RV2
drm/amd/display: put back front end initialization sequence
drm/amd/display: Wait for flip to complete
drm/amd/display: Change min_h_sync_width from 8 to 4
drm/amd/display: use encoder's engine id to find matched free audio device
drm/amd/display: fix DMCU hang when going into Modern Standby
drm/amd/display: Disable Audio on reinitialize hardware
...
|
|
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's more here than we usually have at this stage, but that's
mainly down to the stacktrace changes which came in slightly too late
for the merge window.
Summary:
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
arm64: entry: SP Alignment Fault doesn't write to FAR_EL1
arm64: Force SSBS on context switch
MAINTAINERS: Update my email address
MAINTAINERS: Update my email address
MAINTAINERS: Fix spelling mistake in my name
MAINTAINERS: Update my email address to @kernel.org
arm64: mm: Drop pte_huge()
arm64/sve: Fix a couple of magic numbers for the Z-reg count
arm64/sve: Factor out FPSIMD to SVE state conversion
arm64: stacktrace: Better handle corrupted stacks
arm64: stacktrace: Factor out backtrace initialisation
arm64: stacktrace: Constify stacktrace.h functions
arm64: vdso: Cleanup Makefiles
arm64: vdso: fix flip/flop vdso build bug
arm64: vdso: Fix population of AT_SYSINFO_EHDR for compat vdso
|
|
Pull block fixes from Jens Axboe:
- Several io_uring fixes/improvements:
- Blocking fix for O_DIRECT (me)
- Latter page slowness for registered buffers (me)
- Fix poll hang under certain conditions (me)
- Defer sequence check fix for wrapped rings (Zhengyuan)
- Mismatch in async inc/dec accounting (Zhengyuan)
- Memory ordering issue that could cause stall (Zhengyuan)
- Track sequential defer in bytes, not pages (Zhengyuan)
- NVMe pull request from Christoph
- Set of hang fixes for wbt (Josef)
- Redundant error message kill for libahci (Ding)
- Remove unused blk_mq_sched_started_request() and related ops (Marcos)
- drbd dynamic alloc shash descriptor to reduce stack use (Arnd)
- blkcg ->pd_stat() non-debug print (Tejun)
- bcache memory leak fix (Wei)
- Comment fix (Akinobu)
- BFQ perf regression fix (Paolo)
* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
io_uring: ensure ->list is initialized for poll commands
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
drbd: dynamically allocate shash descriptor
block: blk-mq: Remove blk_mq_sched_started_request and started_request
bcache: fix possible memory leak in bch_cached_dev_run()
io_uring: track io length in async_list based on bytes
io_uring: don't use iov_iter_advance() for fixed buffers
block: properly handle IOCB_NOWAIT for async O_DIRECT IO
blk-mq: allow REQ_NOWAIT to return an error inline
io_uring: add a memory barrier before atomic_read
rq-qos: use a mb for got_token
rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
rq-qos: don't reset has_sleepers on spurious wakeups
rq-qos: fix missed wake-ups in rq_qos_throttle
wait: add wq_has_single_sleeper helper
block, bfq: check also in-flight I/O in dispatch plugging
block: fix sysfs module parameters directory path in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- revert an Intel VT-d patch that caused boot problems on some machines
- fix AMD IOMMU interrupts with x2apic enabled
- fix a potential crash when Intel VT-d domain allocation fails
- fix crash in Intel VT-d driver when accessing a domain without a
flush queue
- formatting fix for new Intel VT-d debugfs code
- fix for use-after-free bug in IOVA code
- fix for a NULL-pointer dereference in Intel VT-d driver when PCI
hotplug is used
- compilation fix for one of the previous fixes
* tag 'iommu-fixes-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Add support for X2APIC IOMMU interrupts
iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
iommu/vt-d: Print pasid table entries MSB to LSB in debugfs
iommu/iova: Remove stale cached32_node
iommu/vt-d: Check if domain->pgd was allocated
iommu/vt-d: Don't queue_iova() if there is no flush queue
iommu/vt-d: Avoid duplicated pci dma alias consideration
Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull iscsi_ibft fix from Konrad Rzeszutek Wilk:
"One tiny fix to enable iSCSI IBFT to be compiled under ARM"
* 'for-linus-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: make ISCSI_IBFT depend on ACPI instead of ISCSI_IBFT_FIND
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of hwmon bug fixes:
- Update k8temp documentation URL
- Register address fixes in nct6775 driver
- Fix potential division by zero in occ driver"
* tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k8temp) documentation: update URL of datasheet
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
hwmon: (occ) Fix division by zero issue
|
|
The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 96b14536d935 ("virtio-ccw: virtio-ccw adapter interrupt support.")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-07-24:
amdgpu:
- RAS fixes for vega20
- Navi VCN fix
- DC audio fixes
- DC DSC fixes
- DC dongle fixes
- DC clk mgr fixes
- Fix DDC lines on some RV2 boards
- GDS fixes for compute
- Navi SMU fixes
ttm:
- Use the same attributes when freeing d_page->vaddr
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724210527.3415-1-alexander.deucher@amd.com
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/i915/gem/i915_gem_mman.c: In function ‘i915_gem_fault’:
drivers/gpu/drm/i915/gem/i915_gem_mman.c:342:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!i915_terminally_wedged(i915))
^
drivers/gpu/drm/i915/gem/i915_gem_mman.c:345:2: note: here
case -EAGAIN:
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c: In function ‘i915_gem_object_map’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:270:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(type);
^~~~~~~~~~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:272:2: note: here
case I915_MAP_WB:
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘error_record_engine_registers’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1196:5: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(engine->id);
^~~~~~~~~~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1197:4: note: here
case RCS0:
^~~~
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_get_fia_supported_lane_count’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/display/intel_dp.c:233:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(lane_info);
^~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:234:2: note: here
case 1:
^~~~
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/cursgv100.o
drivers/gpu/drm/i915/display/intel_display.c:12043:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (WARN_ON(!HAS_DDI(to_i915(dev))))
^
drivers/gpu/drm/i915/display/intel_display.c:12046:3: note: here
case INTEL_OUTPUT_DP:
^~~~
Also, notice that the Makefile is modified to stop ignoring
fall-through warnings. The -Wimplicit-fallthrough option
will be enabled globally in v5.3.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, this patch silences
the following warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c: In function ‘mqd_manager_init_v10’:
./include/linux/dynamic_debug.h:122:52: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __dynamic_func_call(id, fmt, func, ...) do { \
^
./include/linux/dynamic_debug.h:143:2: note: in expansion of macro ‘__dynamic_func_call’
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
./include/linux/dynamic_debug.h:153:2: note: in expansion of macro ‘_dynamic_func_call’
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
./include/linux/printk.h:336:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:432:3: note: in expansion of macro ‘pr_debug’
pr_debug("%s@%i\n", __func__, __LINE__);
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:433:2: note: here
case KFD_MQD_TYPE_COMPUTE:
^~~~
by removing the call to pr_debug() in KFD_MQD_TYPE_CP:
"The mqd init for CP and COMPUTE will have the same routine." [1]
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
[1] https://lore.kernel.org/lkml/c735a1cc-a545-50fb-44e7-c0ad93ee8ee7@amd.com/
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Add missing break statement in order to prevent the code from falling
through to case AMDGPU_IRQ_STATE_ENABLE.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: a644d85a5cd4 ("drm/amdgpu: add gfx v10 implementation (v10)")
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Add missing break statement in order to prevent the code from falling
through to case CHIP_NAVI10.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 14328aa58ce5 ("drm/amdkfd: Add navi10 support to amdkfd. (v3)")
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’:
drivers/mtd/nand/onenand/onenand_base.c:3264:17: warning: this statement may fall through [-Wimplicit-fallthrough=]
this->options |= ONENAND_HAS_NOP_1;
drivers/mtd/nand/onenand/onenand_base.c:3265:2: note: here
case ONENAND_DEVICE_DENSITY_4Gb:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’:
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (n & PCAN_USB_ERROR_BUS_LIGHT) {
^
drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here
case CAN_STATE_ERROR_WARNING:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Notice that in some cases spelling mistakes were fixed.
In other cases, the /* fall through */ comment is placed
at the bottom of the case statement, which is what GCC
is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/firewire/core-device.c: In function ‘set_broadcast_channel’:
drivers/firewire/core-device.c:969:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (data & cpu_to_be32(1 << 31)) {
^
drivers/firewire/core-device.c:974:3: note: here
case RCODE_ADDRESS_ERROR:
^~~~
drivers/firewire/core-iso.c: In function ‘manage_channel’:
drivers/firewire/core-iso.c:308:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((data[0] & bit) == (data[1] & bit))
^
drivers/firewire/core-iso.c:312:3: note: here
default:
^~~~~~~
drivers/firewire/core-topology.c: In function ‘count_ports’:
drivers/firewire/core-topology.c:69:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
(*child_port_count)++;
~~~~~~~~~~~~~~~~~~~^~
drivers/firewire/core-topology.c:70:3: note: here
case SELFID_PORT_PARENT:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that in some cases, the code comment is modified in
accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (reworded a comment)
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki
"These fix two issues related to the RAPL MMIO interface support added
recently and one cpufreq driver issue.
Specifics:
- Initialize the power capping subsystem and the RAPL driver earlier
in case the int340X thermal driver is built-in and attempts to
register an MMIO interface for RAPL which must not happen before
the requisite infrastructure is ready (Zhang Rui)
- Fix the int340X thermal driver's RAPL MMIO interface registration
error path (Rafael Wysocki)
- Fix possible use-after-free in the pasemi cpufreq driver (Wen
Yang)"
* tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()
powercap: Invoke powercap_init() and rapl_init() earlier
|
|
While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.
X = 0;
CPU0 CPU1
rwsem_down_read()
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
X = 1;
rwsem_up_write();
rwsem_mark_wake()
atomic_long_add(adjustment, &sem->count);
smp_store_release(&waiter->task, NULL);
if (!waiter.task)
break;
...
}
r = X;
Allows 'r == 0'.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The base value in do_div() called by hpet_time_div() is truncated from
unsigned long to uint32_t, resulting in a divide-by-zero exception.
UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2
division by zero
CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561
ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20
0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0
Call Trace:
[<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51
[<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166
[<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262
[<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline]
[<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline]
[<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577
[<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676
[<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline]
[<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline]
[<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605
[<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline]
[<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613
[<ffffffff82846003>] tracesys_phase2+0x90/0x95
The main C reproducer autogenerated by syzkaller,
syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
memcpy((void*)0x20000100, "/dev/hpet\000", 10);
syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0);
syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000);
Fix it by using div64_ul().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
misc/eeprom/{at24,at25,eeprom_93xx46} drivers all register their
corresponding devices in the nvmem framework in compat mode which requires
nvmem sysfs interface to be present. The latter, however, has been split
out from nvmem under a separate Kconfig in commit ae0c2d725512 ("nvmem:
core: add NVMEM_SYSFS Kconfig"). As a result, probing certain I2C-attached
EEPROMs now fails with
at24: probe of 0-0050 failed with error -38
because of a stub implementation of nvmem_sysfs_setup_compat()
in drivers/nvmem/nvmem.h. Update the nvmem dependency for these drivers
so they could load again:
at24 0-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Link: https://lore.kernel.org/r/20190716111236.27803-1-asolokha@kb.kras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Not really harmful not to, but also not harm in grabbing the lock. And
this shuts up a new WARNING I introduced in commit ddde3c18b700 ("vt:
More locking checks").
Reported-by: Jens Remus <jremus@linux.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Martin Hostettler <textshell@uchuujin.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Fixes: ddde3c18b700 ("vt: More locking checks")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20190718080903.22622-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A second regression was found in the immediate data transfer (IDT)
support which was added to 5.2 kernel
IDT is used to transfer small amounts of data (up to 8 bytes) in the
field normally used for data dma address, thus avoiding dma mapping.
If the data was not already dma mapped, then IDT support assumed data was
in urb->transfer_buffer, and did not take into accound that even
small amounts of data (8 bytes) can be in a scatterlist instead.
This caused a NULL pointer dereference when sg_dma_len() was used
with non-dma mapped data.
Solve this by not using IDT if scatter gather buffer list is used.
Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support")
Cc: <stable@vger.kernel.org> # v5.2
Reported-by: Maik Stohn <maik.stohn@seal-one.com>
Tested-by: Maik Stohn <maik.stohn@seal-one.com>
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1564044861-1445-1-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a partial revert of 73d31def1aab "usb: usb251xb: Create a ports
field collector method", which broke a existing devicetree
(arch/arm64/boot/dts/freescale/imx8mq.dtsi).
There is no reason why the swap-dx-lanes property should not apply to
the upstream port. The reason given in the breaking commit was that it's
inconsitent with respect to other port properties, but in fact it is not.
All other properties which only apply to the downstream ports explicitly
reject port 0, so there is pretty strong precedence that the driver
referred to the upstream port as port 0. So there is no inconsistency in
this property at all, other than the swapping being also applicable to
the upstream port.
CC: stable@vger.kernel.org #5.2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
