summaryrefslogtreecommitdiff
path: root/fs/afs/proc.c
AgeCommit message (Collapse)Author
2018-10-24afs: Probe multiple fileservers simultaneouslyDavid Howells
Send probes to all the unprobed fileservers in a fileserver list on all addresses simultaneously in an attempt to find out the fastest route whilst not getting stuck for 20s on any server or address that we don't get a reply from. This alleviates the problem whereby attempting to access a new server can take a long time because the rotation algorithm ends up rotating through all servers and addresses until it finds one that responds. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFSDavid Howells
Increase the sizes of the volume ID to 64 bits and the vnode ID (inode number equivalent) to 96 bits to allow the support of YFS. This requires the iget comparator to check the vnode->fid rather than i_ino and i_generation as i_ino is not sufficiently capacious. It also requires this data to be placed into the vnode cache key for fscache. For the moment, just discard the top 32 bits of the vnode ID when returning it though stat. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Fix TTL on VL server and address listsDavid Howells
Currently the TTL on VL server and address lists isn't set in all circumstances and may be set to poor choices in others, since the TTL is derived from the SRV/AFSDB DNS record if and when available. Fix the TTL by limiting the range to a minimum and maximum from the current time. At some point these can be made into sysctl knobs. Further, use the TTL we obtained from the upcall to set the expiry on negative results too; in future a mechanism can be added to force reloading of such data. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Implement VL server rotationDavid Howells
Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-12afs: Fix cell proc listDavid Howells
Access to the list of cells by /proc/net/afs/cells has a couple of problems: (1) It should be checking against SEQ_START_TOKEN for the keying the header line. (2) It's only holding the RCU read lock, so it can't just walk over the list without following the proper RCU methods. Fix these by using an hlist instead of an ordinary list and using the appropriate accessor functions to follow it with RCU. Since the code that adds a cell to the list must also necessarily change, sort the list on insertion whilst we're at it. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-07afs: Fix cell specification to permit an empty address listDavid Howells
Fix the cell specification mechanism to allow cells to be pre-created without having to specify at least one address (the addresses will be upcalled for). This allows the cell information preload service to avoid the need to issue loads of DNS lookups during boot to get the addresses for each cell (500+ lookups for the 'standard' cell list[*]). The lookups can be done later as each cell is accessed through the filesystem. Also remove the print statement that prints a line every time a new cell is added. [*] There are 144 cells in the list. Each cell is first looked up for an SRV record, and if that fails, for an AFSDB record. These get a list of server names, each of which then has to be looked up to get the addresses for that server. E.g.: dig srv _afs3-vlserver._udp.grand.central.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15afs: Show all of a server's addresses in /proc/fs/afs/serversDavid Howells
Show all of a server's addresses in /proc/fs/afs/servers, placing the second plus addresses on padded lines of their own. The current address is marked with a star. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-23afs: Implement network namespacingDavid Howells
Implement network namespacing within AFS, but don't yet let mounts occur outside the init namespace. An additional patch will be required propagate the network namespace across automounts. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-23afs: Mark afs_net::ws_cell as __rcu and set using rcu functionsDavid Howells
The afs_net::ws_cell member is sometimes used under RCU conditions from within an seq-readlock. It isn't, however, marked __rcu and it isn't set using the proper RCU barrier-imposing functions. Fix this by annotating it with __rcu and using appropriate barriers to make sure accesses are correctly ordered. Without this, the code can produce the following warning: >> fs/afs/proc.c:151:24: sparse: incompatible types in comparison expression (different address spaces) Fixes: f044c8847bb6 ("afs: Lay the groundwork for supporting network namespaces") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.David Howells
Rearrange fs/afs/proc.c to get rid of all the remaining predeclarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c to move the show routines upDavid Howells
Rearrange fs/afs/proc.c to move the show routines up to the top of each block so the order is show, iteration, ops, file ops, fops. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c by moving fops and open functions downDavid Howells
Rearrange fs/afs/proc.c by moving fops and open functions down so as to remove predeclarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Move /proc management functions to the end of the fileDavid Howells
In fs/afs/proc.c, move functions that create and remove /proc files to the end of the source file as a first stage in getting rid of all the forward declarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16afs: simplify procfs codeChristoph Hellwig
Use remove_proc_subtree to remove the whole subtree on cleanup, and unwind the registration loop into individual calls. Switch to use proc_create_seq where applicable. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-09afs: Add stats for data transfer operationsDavid Howells
Add statistics to /proc/fs/afs/stats for data transfer RPC operations. New lines are added that look like: file-rd : n=55794 nb=10252282150 file-wr : n=9789 nb=3247763645 where n= indicates the number of ops completed and nb= indicates the number of bytes successfully transferred. file-rd is the counts for read/fetch operations and file-wr the counts for write/store operations. Note that directory and symlink downloading are included in the file-rd stats at the moment. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Locally edit directory data for mkdir/create/unlink/...David Howells
Locally edit the contents of an AFS directory upon a successful inode operation that modifies that directory (such as mkdir, create and unlink) so that we can avoid the current practice of re-downloading the directory after each change. This is viable provided that the directory version number we get back from the modifying RPC op is exactly incremented by 1 from what we had previously. The data in the directory contents is in a defined format that we have to parse locally to perform lookups and readdir, so modifying isn't a problem. If the edit fails, we just clear the VALID flag on the directory and it will be reloaded next time it is needed. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Fix directory handlingDavid Howells
AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Introduce a statistics proc fileDavid Howells
Introduce a proc file that displays a bunch of statistics for the AFS filesystem in the current network namespace. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Implement @cell substitution handlingDavid Howells
Implement @cell substitution handling such that if @cell is seen as a name in a dynamic root mount, then the name of the root cell for that network namespace will be substituted for @cell during lookup. The substitution of @cell for the current net namespace is set by writing the cell name to /proc/fs/afs/rootcell. The value can be obtained by reading the file. For example: # mount -t afs none /kafs -o dyn # echo grand.central.org >/proc/fs/afs/rootcell # ls /kafs/@cell archive/ cvs/ doc/ local/ project/ service/ software/ user/ www/ # cat /proc/fs/afs/rootcell grand.central.org Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Implement @sys substitution handlingDavid Howells
Implement the AFS feature by which @sys at the end of a pathname component may be substituted for one of a list of values, typically naming the operating system. Up to 16 alternatives may be specified and these are tried in turn until one works. Each network namespace has[*] a separate independent list. Upon creation of a new network namespace, the list of values is initialised[*] to a single OpenAFS-compatible string representing arch type plus "_linux26". For example, on x86_64, the sysname is "amd64_linux26". [*] Or will, once network namespace support is finalised in kAFS. The list may be set by: # for i in foo bar linux-x86_64; do echo $i; done >/proc/fs/afs/sysname for which separate writes to the same fd are amalgamated and applied on close. The LF character may be used as a separator to specify multiple items in the same write() call. The list may be cleared by: # echo >/proc/fs/afs/sysname and read by: # cat /proc/fs/afs/sysname foo bar linux-x86_64 Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Don't over-increment the cell usage count when pinning itDavid Howells
AFS cells that are added or set as the workstation cell through /proc are pinned against removal by setting the AFS_CELL_FL_NO_GC flag on them and taking a ref. The ref should be only taken if the flag wasn't already set. Fix this by making it conditional. Without this an assertion failure will occur during module removal indicating that the refcount is too elevated. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Fix checker warningsDavid Howells
Fix warnings raised by checker, including: (*) Warnings raised by unequal comparison for the purposes of sorting, where the endianness doesn't matter: fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer (*) afs_set_cb_interest() is not actually used and can be removed. (*) afs_cell_gc_delay() should be provided with a sysctl. (*) afs_cell_destroy() needs to use rcu_access_pointer() to read cell->vl_addrs. (*) afs_init_fs_cursor() should be static. (*) struct afs_vnode::permit_cache needs to be marked __rcu. (*) afs_server_rcu() needs to use rcu_access_pointer(). (*) afs_destroy_server() should use rcu_access_pointer() on server->addresses as the server object is no longer accessible. (*) afs_find_server() casts __be16/__be32 values to int in order to directly compare them for the purpose of finding a match in a list, but is should also annotate the cast with __force to avoid checker warnings. (*) afs_check_permit() accesses vnode->permit_cache outside of the RCU readlock, though it doesn't then access the value; the extraneous access is deleted. False positives: (*) Conditional locking around the code in xdr_decode_AFSFetchStatus. This can be dealt with in a separate patch. fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block (*) Incorrect handling of seq-retry lock context balance: fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different lock contexts for basic block fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block Errors: (*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go round again if it successfully found the workstation cell. (*) Fix UUID decode in afs_deliver_cb_probe_uuid(). (*) afs_cache_permit() has a missing rcu_read_unlock() before one of the jumps to the someone_else_changed_it label. Move the unlock to after the label. (*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when encoding to XDR. (*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl() when decoding from XDR. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Overhaul volume and server record caching and fileserver rotationDavid Howells
The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Add an address list conceptDavid Howells
Add an RCU replaceable address list structure to hold a list of server addresses. The list also holds the To this end: (1) A cell's VL server address list can be loaded directly via insmod or echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB or SRV records. (2) Anyone wanting to use a cell's VL server address must wait until the cell record comes online and has tried to obtain some addresses. (3) An FS server's address list, for the moment, has a single entry that is the key to the server list. This will change in the future when a server is instead keyed on its UUID and the VL.GetAddrsU operation is used. (4) An 'address cursor' concept is introduced to handle iteration through the address list. This is passed to the afs_make_call() as, in the future, stuff (such as abort code) that doesn't outlast the call will be returned in it. In the future, we might want to annotate the list with information about how each address fares. We might then want to propagate such annotations over address list replacement. Whilst we're at it, we allow IPv6 addresses to be specified in colon-delimited lists by enclosing them in square brackets. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Overhaul cell database managementDavid Howells
Overhaul the way that the in-kernel AFS client keeps track of cells in the following manner: (1) Cells are now held in an rbtree to make walking them quicker and RCU managed (though this is probably overkill). (2) Cells now have a manager work item that: (A) Looks after fetching and refreshing the VL server list. (B) Manages cell record lifetime, including initialising and destruction. (B) Manages cell record caching whereby threads are kept around for a certain time after last use and then destroyed. (C) Manages the FS-Cache index cookie for a cell. It is not permitted for a cookie to be in use twice, so we have to be careful to not allow a new cell record to exist at the same time as an old record of the same name. (3) Each AFS network namespace is given a manager work item that manages the cells within it, maintaining a single timer to prod cells into updating their DNS records. This uses the reduce_timer() facility to make the timer expire at the soonest timed event that needs happening. (4) When a module is being unloaded, cells and cell managers are now counted out using dec_after_work() to make sure the module text is pinned until after the data structures have been cleaned up. (5) Each cell's VL server list is now protected by a seqlock rather than a semaphore. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Allow IPv6 address specification of VL serversDavid Howells
Allow VL server specifications to be given IPv6 addresses as well as IPv4 addresses, for example as: echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells Note that ':' is the expected separator for separating IPv4 addresses, but if a ',' is detected or no '.' is detected in the string, the delimiter is switched to ','. This also works with DNS AFSDB or SRV record strings fetched by upcall from userspace. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Keep and pass sockaddr_rxrpc addresses rather than in_addrDavid Howells
Keep and pass sockaddr_rxrpc addresses around rather than keeping and passing in_addr addresses to allow for the use of IPv6 and non-standard port numbers in future. This also allows the port and service_id fields to be removed from the afs_call struct. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Push the net ns pointer to more placesDavid Howells
Push the network namespace pointer to more places in AFS, including the afs_server structure (which doesn't hold a ref on the netns). In particular, afs_put_cell() now takes requires a net ns parameter so that it can safely alter the netns after decrementing the cell usage count - the cell will be deallocated by a background thread after being cached for a period, which means that it's not safe to access it after reducing its usage count. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Lay the groundwork for supporting network namespacesDavid Howells
Lay the groundwork for supporting network namespaces (netns) to the AFS filesystem by moving various global features to a network-namespace struct (afs_net) and providing an instance of this as a temporary global variable that everything uses via accessor functions for the moment. The following changes have been made: (1) Store the netns in the superblock info. This will be obtained from the mounter's nsproxy on a manual mount and inherited from the parent superblock on an automount. (2) The cell list is made per-netns. It can be viewed through /proc/net/afs/cells and also be modified by writing commands to that file. (3) The local workstation cell is set per-ns in /proc/net/afs/rootcell. This is unset by default. (4) The 'rootcell' module parameter, which sets a cell and VL server list modifies the init net namespace, thereby allowing an AFS root fs to be theoretically used. (5) The volume location lists and the file lock manager are made per-netns. (6) The AF_RXRPC socket and associated I/O bits are made per-ns. The various workqueues remain global for the moment. Changes still to be made: (1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced from the old name. (2) A per-netns subsys needs to be registered for AFS into which it can store its per-netns data. (3) Rather than the AF_RXRPC socket being opened on module init, it needs to be opened on the creation of a superblock in that netns. (4) The socket needs to be closed when the last superblock using it is destroyed and all outstanding client calls on it have been completed. This prevents a reference loop on the namespace. (5) It is possible that several namespaces will want to use AFS, in which case each one will need its own UDP port. These can either be set through /proc/net/afs/cm_port or the kernel can pick one at random. The init_ns gets 7001 by default. Other issues that need resolving: (1) The DNS keyring needs net-namespacing. (2) Where do upcalls go (eg. DNS request-key upcall)? (3) Need something like open_socket_in_file_ns() syscall so that AFS command line tools attempting to operate on an AFS file/volume have their RPC calls go to the right place. Signed-off-by: David Howells <dhowells@redhat.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-01afs: proc cells and rootcell are writeablePali Rohár
Both proc files are writeable and used for configuring cells. But there is missing correct mode flag for writeable files. Without this patch both proc files are read only. [ It turns out they aren't really read-only, since root can write to them even if the write bit isn't set due to CAP_DAC_OVERRIDE ] Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25afs: get rid of junk in fs/afs/proc.cAl Viro
kill pointless method instances and don't bother with ->owner - it's ignored for procfs files anyway, make use of remove_proc_subtree() for removal, get rid of cell->proc_dir. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11AFS: Implement an autocell mount capability [ver #2]wanglei
Implement the ability for the root directory of a mounted AFS filesystem to accept lookups of arbitrary directory names, to interpet the names as the names of cells, to look the cell names up in the DNS for AFSDB records and to mount the root.cell volume of the nominated cell on the pseudo-directory created by lookup. This facility is requested by passing: -o autocell to the mountpoint for which this is desired, usually the /afs mount. To use this facility, a DNS upcall program is required for AFSDB records. This can be obtained from: http://people.redhat.com/~dhowells/afs/dns.afsdb.c It should be compiled with -lresolv and -lkeyutils and installed as, say: /usr/sbin/dns.afsdb Then the following line needs to be added to /sbin/request-key.conf: create dns_resolver afsdb:* * /usr/sbin/dns.afsdb %k This can be tested by mounting AFS, say: insmod dns_resolver.ko insmod af-rxrpc.ko insmod kafs.ko rootcell=grand.central.org mount -t afs "#grand.central.org:root.cell." /afs -o autocell and doing: ls /afs/grand.central.org/ which should show: archive/ cvs/ doc/ local/ project/ service/ software/ user/ www/ if it works. Signed-off-by: Wang Lei <wang840925@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-23seq_file: constify seq_operationsJames Morris
Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-31fs: replace NIPQUAD()Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29afs: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: David Howells <dhowells@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fs/afs/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global functions static: - rxrpc.c: afs_send_pages() - vlocation.c: afs_vlocation_queue_for_updates() - write.c: afs_writepages_region() - make the following needlessly global variables static: - mntpt.c: afs_mntpt_expiry_timeout - proc.c: afs_vlocation_states[] - server.c: afs_server_timeout - vlocation.c: afs_vlocation_timeout - vlocation.c: afs_vlocation_update_timeout - #if 0 the following unused function: - cell.c: afs_get_cell_maybe() - #if 0 the following unused variables: - callback.c: afs_vnode_update_timeout - cmservice.c: struct afs_cm_workqueue Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Make AFS use seq_list_xxx helpersPavel Emelianov
These proc files show some header before dumping the list, so the seq_list_start_head() is used. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-26[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.David Howells
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AFS]: Clean up the AFS sourcesDavid Howells
Clean up the AFS sources. Also remove references to AFS keys. RxRPC keys are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-09-29[PATCH] afs: add lock annotations to afs_proc_cell_servers_{start,stop}Josh Triplett
afs_proc_cell_servers_start acquires a lock, and afs_proc_cell_servers_stop releases that lock. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by: Josh Triplett <josh@freedesktop.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Make most file operations structs in fs/ constArjan van de Ven
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!