| Age | Commit message (Collapse) | Author |
|---|
|
The discard path is supposed to issue journal flushes when there's too
many buckets empty buckets that need a journal commit before they can be
written to again, but at some point this code seems to have been lost.
Bring it back with a new optimization to make sure we don't issue too
many journal flushes: the journal now tracks the sequence number of the
most recent flush in progress, which the discard path uses when deciding
which buckets need a journal flush.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't hold mark_lock while calling fsck_err() - that's a deadlock,
mark_lock is meant to be a leaf node lock.
It's also unnecessary for gc_bucket() and bucket_gen(); rcu suffices
since the bucket_gens array describes its size, and we can't race with
device removal or resize during gc/fsck since that takes state lock.
Reported-by: syzbot+38641fcbda1aaffefdd4@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Check open buckets and buckets waiting for journal commit before doing
other expensive lookups.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This lets us use darray macros on dev_alloc_list (and it will become a
darray eventually, when we increase the maximum number of devices).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The function bch2_bucket_alloc_trans() lacked a description for the
nowait parameter in its documentation comment block. This patch adds the
missing description to ensure all parameters are properly documented.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=12179
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When calling check_discard_freeespace_key from the allocator, we can't
repair without recursing - run it asynchronously instead.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The early-early allocation path, bch2_bucket_alloc_new_fs(), is no
longer needed - and inconsistencies around new_fs_bucket_idx have been a
frequent source of bugs.
Reported-by: syzbot+592425844580a6598410@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
try_alloc_bucket() has a "safety" check, which avoids allocating a
bucket if there's any backpointers present.
But backpointers are not the source of truth for live data in a bucket,
the bucket sector counts are; this check was fairly useless, and we're
also deferring backpointers checks from fsck to runtime in the near
future.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
check_discard_freespace_key() was doing all the same checks as
try_alloc_bucket(), but with repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for converting try_alloc_bucket() to use
bch2_check_discard_freespace_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Open buckets on the partial list should not count as allocated when
we're trying to allocate from the partial list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
these are an important source of stranded buckets we need to be able to
watch
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Using commit_do() to call alloc_sectors_start_trans() breaks when we're
randomly injecting transaction restarts - the restart in the commit
causes us to leak the lock that alloc_sectorS_start_trans() takes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
No reason for it not to be where it's needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this was an oversight: rebalance is moving data to a specific device, so
we don't want it falling back to the full filesystem
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
rebalance writes must be BCH_WRITE_ALLOC_NOWAIT because they don't
allocate from the full filesystem - but we don't want spurious
allocation failures due to open buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a line for capacity
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Limit these messages to once every 2 minutes to avoid spamming logs;
with multiple devices the output can be quite significant.
Also, up the default timeout to 30 seconds from 10 seconds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
chasing down a device removal deadlock with erasure coding
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we're called via
trans commit -> btree split -> allocator
We may have already arbitrarily many btree_paths, for the transaction
commit we're trying to do; when this happens, the
btree_trans_too_many_iters() call causes us to livelock.
Since the allocator calls btree_iter_dontneed to release paths as it
iterates, this shouldn't cause any problems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rewrite fsck/gc for the new accounting scheme.
This adds a second set of in-memory accounting counters for gc to use;
like with other parts of gc we run all trigger in TRIGGER_GC mode, then
compare what we calculated to existing in-memory accounting at the end.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a pretty printer so the btree reserve cache can be seen in sysfs; as
it pins open_buckets we need it for tracking down open_buckets issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes warnings from bch2_print_allocator_stuck()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's no reason for discards to be single threaded across all devices;
this will improve performance on multi device setups.
Additionally, making them per-device simplifies the refcounting on
bch_dev->io_ref; we now hold it for the duration that the discard path
is running, which fixes a race between the discard path and device
removal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now have a small bitmap in the member info section of the superblock
for "regions that have btree nodes", so that if we ever have to scan for
btree nodes in repair we don't have to scan the whole device(s).
This tweaks the allocator to prefer allocating from regions that are
already marked in this bitmap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Tracepoints are garbage, and perf trace even cuts off some of our
fields.
Much nicer to just trace a string, and then we can build nicely
formatted output with printbufs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Wrapper around bch2_dev_have_ref() for open_buckets; we do guarantee
that the device an open_bucket points to exists.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This will be used in the next patch for adding some new debug mode
asserts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we block on the allocator for more than 10 seconds, print out some
useful debugging info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
prep work for making the allocator try to keep btree nodes within the
existing member info btree allocated bitmap
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is a nice cleanup - and we've also been having problems with
kthread creation in the mount path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're about to add new asserts for btree_trans locking consistency, and
part of that requires that aren't using the btree_trans while it's
unlocked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Some renaming for better consistency
bch2_member_exists -> bch2_member_alive
bch2_dev_exists -> bch2_member_exists
bch2_dev_exsits2 -> bch2_dev_exists
bch_dev_locked -> bch2_dev_locked
bch_dev_bkey_exists -> bch2_dev_bkey_exists
new helper - bch2_dev_safe
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new watermark, higher priority than BCH_WATERMARK_reclaim,
for interior btree updates. We've seen a deadlock where journal replay
triggers a ton of btree node merges, and these use up all available open
buckets and then interior updates get stuck.
One cause of this is that we're currently lacking btree node merging on
write buffer btrees - that needs to be fixed as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
prep work for lifting out of fs/bcachefs/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need bounds checking since new versions may introduce new data types.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
