| Age | Commit message (Collapse) | Author |
|---|
|
Use the new bch_member->seq, sb->write_time fields to detect split brain
and kick out devices when necessary.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
With the upcoming member seq patch, it's now critical that we don't ever
write to a superblock that hasn't been version downgraded - failure to
update member seq fields will cause split brain detection to fire
erroniously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previosuly, the transaction commit path would have to add keys to the
btree write buffer as a separate operation, requiring additional global
synchronization.
This patch introduces a new journal entry type, which indicates that the
keys need to be copied into the btree write buffer prior to being
written out. We switch the journal entry type back to
JSET_ENTRY_btree_keys prior to write, so this is not an on disk format
change.
Flushing the btree write buffer may require pulling keys out of journal
entries yet to be written, and quiescing outstanding journal
reservations; we previously added journal->buf_lock for synchronization
with the journal write path.
We also can't put strict bounds on the number of keys in the journal
destined for the write buffer, which means we might overflow the size of
the preallocated buffer and have to reallocate - this introduces a
potentially fatal memory allocation failure. This is something we'll
have to watch for, if it becomes an issue in practice we can do
additional mitigation.
The transaction commit path no longer has to explicitly check if the
write buffer is full and wait on flushing; this is another performance
optimization. Instead, when the btree write buffer is close to full we
change the journal watermark, so that only reservations for journal
reclaim are allowed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Continuing the project of replacing generic error codes with more
specific ones.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Journal replay now first attempts to replay keys in sorted order,
similar to how the btree write buffer flush path works.
Any keys that can not be replayed due to journal deadlock are then left
for later and replayed in journal order, unpinning journal entries as we
go.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new superblock section that contains a list of
{ minor version, recovery passes, errors_to_fix }
that is - a list of recovery passes that must be run when downgrading
past a given version, and a list of errors to silently fix.
The upcoming disk accounting rewrite is not going to be fully
compatible: we're going to have to regenerate accounting both when
upgrading to the new version, and also from downgrading from the new
version, since the new method of doing disk space accounting is a
completely different architecture based on deltas, and synchronizing
them for every jounal entry write to maintain compatibility is going to
be too expensive and impractical.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.
- recovery_passes_requried: recovery passes that must be run on the
next mount
- errors_silent: errors that will be silently fixed
These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Validation was completely missing for replicas entries in the journal
(not the superblock replicas section) - we can't have replicas entries
pointing to invalid devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, there was a bug where if an extent had greater durability
than required (because we needed to move a durability=1 pointer and
ended up putting it on a durability 2 device), we would submit a write
for replicas=2 - the durability of the pointer being rewritten - instead
of the number of replicas required to bring it back up to the
data_replicas option.
This, plus the allocation path sometimes allocating on a greater
durability device than requested, meant that extents could continue
having more and more replicas added as they were being rewritten.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We avoid using standard error codes: private, per-callsite error codes
make debugging easier.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new superblock section to keep counts of errors seen since
filesystem creation: we'll be addingcounters for every distinct fsck
error.
The new superblock section has entries of the for [ id, count,
time_of_last_error ]; this is intended to let us see what errors are
occuring - and getting fixed - via show-super output.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since compression options now include compression level, proper
validation is a bit more involved.
This adds bch2_compression_opt_valid(), and plumbs it around
appropriately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
members_v2 has dynamically resizable entries so that we can extend
bch_member. The members can no longer be accessed with simple array
indexing Instead members_v2_get is used to find a member's exact
location within the array and returns a copy of that member.
Alternatively member_v2_get_mut retrieves a mutable point to a member.
Signed-off-by: Hunter Shaffer <huntershaffer182456@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- fix a few uninitialized return values
- return a proper error code in lookup_lostfound()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a tracepoint to print the reason a read wasn't promoted.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More reorganization, this splits up io.c into
- io_read.c
- io_misc.c - fallocate, fpunch, truncate
- io_write.c
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds bch2_run_explicit_recovery_pass(), for rewinding recovery and
explicitly running a specific recovery pass - this is a more general
replacement for how we were running topology repair before.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This introduces bch2_run_explicit_recovery_pass() and uses it for when
fsck detects that we need to re-run dead snaphots cleanup, and makes
dead snapshot cleanup more like a normal recovery pass.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This improves the repair path for overlapping extents - we now verify
that we find in the btree the overlapping extents that the algorithm
detected, and fail the fsck run with a more useful error if it doesn't
match.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we return errors outside of bcachefs, we need to return a standard
error code - fix this for BCH_ERR_fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Similar to previous fixes, we can't incur page faults while holding
btree locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As with previous conversions, replace -ENOENT uses with more informative
private error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new btree which gets us a persistent per-snapshot-tree
identifier.
- BTREE_ID_snapshot_trees
- KEY_TYPE_snapshot_tree
- bch_snapshot now has a field that points to a snapshot_tree
This is going to be used to designate one snapshot ID/subvolume out of a
given tree of snapshots as the "main" subvolume, so that we can do quota
accounting in that subvolume and not the rest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new helper for allocating a new slot in a btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds private error codes for most (but not all) of our ENOMEM uses,
which makes it easier to track down assorted allocation failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's possible that we reuse a stripe that doesn't have quite the same
configuration as the stripe_head we're allocating from. In that case, we
have to make sure that the new stripe uses the settings from the stripe
we resue, not the stripe head, and make sure the buffer is allocated
correctly.
This fixes the ec_mixed_tiers test.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rework stripe creation path - new algorithm for deciding when to create
new stripes or reuse existing stripes.
We add a new allocation watermark, RESERVE_stripe, above RESERVE_none.
Then we always try to create a new stripe by doing RESERVE_stripe
allocations; if this fails, we reuse an existing stripe and allocate
buckets for it with the reserve watermark for the given write
(RESERVE_none or RESERVE_movinggc).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The promote path calls data_update_init() and now that we take locks here,
there's potential for promote to block our read path, just error
when we can't take the lock instead of blocking.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data update path requires special support for unwritten extents - we
still need to be able to move them, but there's no need to read or write
anything.
This patch adds a new error code to tell bch2_move_extent() that we're
short circuiting the read, and adds bch2_update_unwritten_extent() to
create a reservation then call __bch2_data_update_index_update().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch adds backpointers: we now have a reverse index from device
and offset on that device (specifically, offset within a bucket) back to
btree nodes and (non cached) data extents.
The first 40 backpointers within a bucket are stored in the alloc key;
after that backpointers spill over to the next backpointers btree. This
is to help avoid performance regressions from additional btree updates
on large streaming workloads.
This patch adds all the code for creating, checking and repairing
backpointers. The next patch in the series is going to use backpointers
for copygc - finally getting rid of the need to scan all extents to do
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new method of doing btree updates - a straight write buffer,
implemented as a flat fixed size array.
This is only useful when we don't need to read from the btree in order
to do the update, and when reading is infrequent - perfect for the LRU
btree.
This will make LRU btree updates fast enough that we'll be able to use
it for persistently indexing buckets by fragmentation, which will be a
massive boost to copygc performance.
Changes:
- A new btree_insert_type enum, for btree_insert_entries. Specifies
btree, btree key cache, or btree write buffer.
- bch2_trans_update_buffered(): updates via the btree write buffer
don't need a btree path, so we need a new update path.
- Transaction commit path changes:
The update to the btree write buffer both mutates global, and can
fail if there isn't currently room. Therefore we do all write buffer
updates in the transaction all at once, and also if it fails we have
to revert filesystem usage counter changes.
If there isn't room we flush the write buffer in the transaction
commit error path and retry.
- A new persistent option, for specifying the number of entries in the
write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error code cleanup, for better error messages and debugability.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error code improvements - this gets us more useful error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
While a btree transaction is running, we hold a SRCU read lock on the
btree key cache that prevents btree key cache keys from being freed -
this is so that relock() operations won't access freed memory.
The downside of this is that long running btree transactions prevent
memory from being freed from the key cache. This adds a check in
bch2_trans_begin() - if the transaction has been running longer than 1
second, drop and retake the SRCU read lock and zero out pointers to
unlock key cache paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We shouldn't be overloading standard error codes now that we have
provisions for bcachefs-specific errorcodes: this patch converts super.c
and super-io.c to per error site errcodes, with a bit of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace with standard bcachefs-private error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch in the series is (finally!) going to change btree splits
(and interior updates in general) to not take intent locks all the way
up to the root - instead only locking the nodes they'll need to modify.
However, this will be introducing a race since if we're not holding a
write lock on a btree node it can be written out by another thread, and
then we might not have enough space for a new bset entry.
We can handle this by retrying - we just need to introduce a new error
path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This deletes our old lock ordering based deadlock avoidance code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We've outgrown our own deadlock avoidance strategy.
The btree iterator API provides an interface where the user doesn't need
to concern themselves with lock ordering - different btree iterators can
be traversed in any order. Without special care, this will lead to
deadlocks.
Our previous strategy was to define a lock ordering internally, and
whenever we attempt to take a lock and trylock() fails, we'd check if
the current btree transaction is holding any locks that cause a lock
ordering violation. If so, we'd issue a transaction restart, and then
bch2_trans_begin() would re-traverse all previously used iterators, but
in the correct order.
That approach had some issues, though.
- Sometimes we'd issue transaction restarts unnecessarily, when no
deadlock would have actually occured. Lock ordering restarts have
become our primary cause of transaction restarts, on some workloads
totally 20% of actual transaction commits.
- To avoid deadlock or livelock, we'd often have to take intent locks
when we only wanted a read lock: with the lock ordering approach, it
is actually illegal to hold _any_ read lock while blocking on an intent
lock, and this has been causing us unnecessary lock contention.
- It was getting fragile - the various lock ordering rules are not
trivial, and we'd been seeing occasional livelock issues related to
this machinery.
So, since bcachefs is already a relational database masquerading as a
filesystem, we're stealing the next traditional database technique and
switching to a cycle detector for avoiding deadlocks.
When we block taking a btree lock, after adding ourself to the waitlist
but before sleeping, we do a DFS of btree transactions waiting on other
btree transactions, starting with the current transaction and walking
our held locks, and transactions blocking on our held locks.
If we find a cycle, we emit a transaction restart. Occasionally (e.g.
the btree split path) we can not allow the lock() operation to fail, so
if necessary we'll tell another transaction that it has to fail.
Result: trans_restart_would_deadlock events are reduced by a factor of
10 to 100, and we'll be able to delete a whole bunch of grotty, fragile
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Continuing the saga of introducing private dedicated error codes for
each error path, this patch converts ENOSPC to error codes that are
subtypes of ENOSPC. We've recently had a test failure where we got
-ENOSPC where we shouldn't have, and didn't have enough information to
tell where it came from, so this patch will solve that problem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch is going to be adding private error codes for all the
places we return -ENOSPC.
Additionally, this patch updates return paths at all module boundaries
to call bch2_err_class(), to return the standard error code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This aids in debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Now that we have error codes, with subtypes, we can switch to our own
error code for transaction restarts - and even better, a distinct error
code for each transaction restart reason: clearer code and better
debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
