summaryrefslogtreecommitdiff
path: root/fs/binfmt_flat.c
AgeCommit message (Collapse)Author
2020-08-24binfmt_flat: revert "binfmt_flat: don't offset the data start"Max Filippov
binfmt_flat loader uses the gap between text and data to store data segment pointers for the libraries. Even in the absence of shared libraries it stores at least one pointer to the executable's own data segment. Text and data can go back to back in the flat binary image and without offsetting data segment last few instructions in the text segment may get corrupted by the data segment pointer. Fix it by reverting commit a2357223c50a ("binfmt_flat: don't offset the data start"). Cc: stable@vger.kernel.org Fixes: a2357223c50a ("binfmt_flat: don't offset the data start") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2020-06-10Merge branch 'uaccess.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc uaccess updates from Al Viro: "Assorted uaccess patches for this cycle - the stuff that didn't fit into thematic series" * 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user() x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user() user_regset_copyout_zero(): use clear_user() TEST_ACCESS_OK _never_ had been checked anywhere x86: switch cp_stat64() to unsafe_put_user() binfmt_flat: don't use __put_user() binfmt_elf_fdpic: don't use __... uaccess primitives binfmt_elf: don't bother with __{put,copy_to}_user() pselect6() and friends: take handling the combined 6th/7th args into helper
2020-06-08binfmt_flat: use flush_icache_user_rangeChristoph Hellwig
load_flat_file works on user addresses. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/20200515143646.3857579-28-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03binfmt_flat: don't use __put_user()Al Viro
... and check the return value Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-07exec: Rename flush_old_exec begin_new_execEric W. Biederman
There is and has been for a very long time been a lot more going on in flush_old_exec than just flushing the old state. After the movement of code from setup_new_exec there is a whole lot more going on than just flushing the old executables state. Rename flush_old_exec to begin_new_exec to more accurately reflect what this function does. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-07exec: Merge install_exec_creds into setup_new_execEric W. Biederman
The two functions are now always called one right after the other so merge them together to make future maintenance easier. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-07binfmt: Move install_exec_creds after setup_new_exec to match binfmt_elfEric W. Biederman
In 2016 Linus moved install_exec_creds immediately after setup_new_exec, in binfmt_elf as a cleanup and as part of closing a potential information leak. Perform the same cleanup for the other binary formats. Different binary formats doing the same things the same way makes exec easier to reason about and easier to maintain. Greg Ungerer reports: > I tested the the whole series on non-MMU m68k and non-MMU arm > (exercising binfmt_flat) and it all tested out with no problems, > so for the binfmt_flat changes: Tested-by: Greg Ungerer <gerg@linux-m68k.org> Ref: 9f834ec18def ("binfmt_elf: switch to new creds when switching to new mm") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-07-16fs/binfmt_flat.c: remove set but not used variable 'inode'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: fs/binfmt_flat.c: In function load_flat_file: fs/binfmt_flat.c:419:16: warning: variable inode set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190525125341.9844-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68nommu updates from Greg Ungerer: "A series of cleanups for the FLAT format binary loader, binfmt_flat, from Christoph. The end goal is to support no-MMU on RISC-V, and the last patch enables that" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: riscv: add binfmt_flat support binfmt_flat: don't offset the data start binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c binfmt_flat: remove the persistent argument from flat_get_addr_from_rp binfmt_flat: provide an asm-generic/flat.h binfmt_flat: make support for old format binaries optional binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option binfmt_flat: add endianess annotations binfmt_flat: use fixed size type for the on-disk format binfmt_flat: consolidate two version of flat_v2_reloc_t binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition binfmt_flat: remove the uapi <linux/flat.h> header binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable binfmt_flat: remove flat_old_ram_flag binfmt_flat: provide a default version of flat_get_relocate_addr binfmt_flat: remove flat_set_persistent binfmt_flat: remove flat_reloc_valid
2019-06-29fs/binfmt_flat.c: make load_flat_shared_library() workJann Horn
load_flat_shared_library() is broken: It only calls load_flat_file() if prepare_binprm() returns zero, but prepare_binprm() returns the number of bytes read - so this only happens if the file is empty. Instead, call into load_flat_file() if the number of bytes read is non-negative. (Even if the number of bytes is zero - in that case, load_flat_file() will see nullbytes and return a nice -ENOEXEC.) In addition, remove the code related to bprm creds and stop using prepare_binprm() - this code is loading a library, not a main executable, and it only actually uses the members "buf", "file" and "filename" of the linux_binprm struct. Instead, call kernel_read() directly. Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses") Signed-off-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-24binfmt_flat: don't offset the data startChristoph Hellwig
Ever since the initial commit of the binfmt_flat shared library support back in the bitkeeper days we've offset the actual in-memory .data start by one field per possible shared library, or 1 in case shared library support isn't enabled. I can't find anything in the loader that actually makes use of it, nor was it present before shared library support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.cChristoph Hellwig
MAX_SHARED_LIBS is an implementation detail of the kernel loader, and should be kept away from the file format definition. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove the persistent argument from flat_get_addr_from_rpChristoph Hellwig
The argument is never used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: make support for old format binaries optionalChristoph Hellwig
No need to carry the extra code around, given that systems using flat binaries are generally very resource constrained. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: add endianess annotationsChristoph Hellwig
Most binfmt_flat on-disk fields are big endian. Use the proper __be32 type where applicable. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove the uapi <linux/flat.h> headerChristoph Hellwig
The split between the two flat.h files is completely arbitrary, and the uapi version even contains CONFIG_ ifdefs that can't work in userspace. The only userspace program known to use the header is elf2flt, and it ships with its own version of the combined header. Use the chance to move the <asm/flat.h> inclusion out of this file, as it is in no way needed for the format defintion, but just for the binfmt implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variableChristoph Hellwig
This will eventually allow us to kill the need for an <asm/flat.h> for many cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_old_ram_flagChristoph Hellwig
Instead add a Kconfig variable that only h8300 selects. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: provide a default version of flat_get_relocate_addrChristoph Hellwig
This way only the two architectures that do masking need to provide the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_set_persistentChristoph Hellwig
This helper is a no-op on all architectures, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_reloc_validChristoph Hellwig
This helper is the same for all architectures, open code it in the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2018-04-11exec: introduce finalize_exec() before start_thread()Kees Cook
Provide a final callback into fs/exec.c before start_thread() takes over, to handle any last-minute changes, like the coming restoration of the stack limit. Link: http://lkml.kernel.org/r/1518638796-20819-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Cc: Greg KH <greg@kroah.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-08binfmt_flat: delete two error messages for a failed memory allocation in ↵Markus Elfring
decompress_exec() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/f92aac79-b05e-321a-1a19-d38c7159ee9c@users.sourceforge.net Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04fs: fix kernel_read prototypeChristoph Hellwig
Use proper ssize_t and size_t types for the return value and count argument, move the offset last and make it an in/out argument like all other read/write helpers, and make the buf argument a void pointer to get rid of lots of casts in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-01exec: Rename bprm->cred_prepared to called_set_credsKees Cook
The cred_prepared bprm flag has a misleading name. It has nothing to do with the bprm_prepare_cred hook, and actually tracks if bprm_set_creds has been called. Rename this flag and improve its comment. Cc: David Howells <dhowells@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Serge Hallyn <serge@hallyn.com>
2017-07-16binfmt_flat: Use %u to format u32Geert Uytterhoeven
Several variables had their types changed from unsigned long to u32, but the printk()-style format to print them wasn't updated, leading to: fs/binfmt_flat.c: In function ‘load_flat_file’: fs/binfmt_flat.c:577: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘u32’ Fixes: 468138d78510688f ("binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-03binfmt_flat: flat_{get,put}_addr_from_rp() should be able to failAl Viro
on MMU targets EFAULT is possible here. Make both return 0 or error, passing what used to be the return value of flat_get_addr_from_rp() by reference. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-28binfmt_flat: allow compressed flat binary format to work on MMU systemsNicolas Pitre
Let's take the simple and obvious approach by decompressing the binary into a kernel buffer and then copying it to user space. Those who are looking for top performance on an MMU system are unlikely to choose this executable format anyway. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-28binfmt_flat: add MMU-specific supportNicolas Pitre
Not much else to do at this point except for the different stack setups. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-28binfmt_flat: update libraries' data segment pointer with userspace accessorsNicolas Pitre
This is needed on systems with a MMU. This also gets rid of the strangest C code I've seen lateli i.e. an integer indexed with a pointer value within square brackets. That really looked backwards. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-28binfmt_flat: use clear_user() rather than memset() to clear .bssNicolas Pitre
This is needed on systems with a MMU. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-28binfmt_flat: use proper user space accessors with old relocs codeNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: use proper user space accessors with relocs processing codeNicolas Pitre
Relocs are fixed up in place in user space memory. The appropriate accessors are required for this code to work with an active MMU. The architecture specific handlers flat_get_addr_from_rp() and flat_put_addr_at_rp() for ARM and M68K are adjusted with separate patches. SuperH and Xtensa are left out as they doesn't implement __get_user_unaligned() and __put_user_unaligned() yet. The other architectures that use BFLT don't have any MMU. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: clean up create_flat_tables() and stack accessesNicolas Pitre
In addition to better code clarity, this brings proper usage of user memory accessors everywhere the stack is touched. This is essential for making this work on MMU systems. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: use generic transfer_args_to_stack()Nicolas Pitre
This gets rid of the rather ugly, open coded and suboptimal copy code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: prevent kernel dammage from corrupted executable headersNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: convert printk invocations to their modern formNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-25binfmt_flat: assorted cleanupsNicolas Pitre
Remove excessive casts, do some code grouping, fix most important checkpatch.pl complaints, etc. No functional changes. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04fs/binfmt_flat.c: make old_reloc() staticAxel Lin
old_reloc() is only used in this file, make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29new helper: read_code()Al Viro
switch binfmts that use ->read() to that (and to kernel_read() in several cases in binfmt_flat - sure, it's nommu, but still, doing ->read() into kmalloc'ed buffer...) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of ->load_binary()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-06coredump: pass siginfo_t* to do_coredump() and below, not merely signrDenys Vlasenko
This is a preparatory patch for the introduction of NT_SIGINFO elf note. With this patch we pass "siginfo_t *siginfo" instead of "int signr" to do_coredump() and put it into coredump_params. It will be used by the next patch. Most changes are simple s/signr/siginfo->si_signo/. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: "Jonathan M. Foote" <jmfoote@cert.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Pedro Alves <palves@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30binfmt_flat: use vm_munmap, we are missing ->mmap_sem thereAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-20VM: add "vm_mmap()" helper functionLinus Torvalds
This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...