summaryrefslogtreecommitdiff
path: root/fs/block_dev.c
AgeCommit message (Collapse)Author
2020-04-21block: remove unused headerMa, Jianpeng
Dax related code already removed from this file. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-20bdev: Reduce time holding bd_mutex in sync in blkdev_close()Douglas Anderson
While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with: while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done With my reproduction here are the relevant bits from the hung task detector: INFO: task udevd:294 blocked for more than 122 seconds. ... udevd D 0 294 1 0x00400008 Call trace: ... mutex_lock_nested+0x40/0x50 __blkdev_get+0x7c/0x3d4 blkdev_get+0x118/0x138 blkdev_open+0x94/0xa8 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3c8 ... ... Showing all locks held in the system: ... 1 lock held by dd/2798: #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204 ... dd D 0 2798 2764 0x00400208 Call trace: ... schedule+0x8c/0xbc io_schedule+0x1c/0x40 wait_on_page_bit_common+0x238/0x338 __lock_page+0x5c/0x68 write_cache_pages+0x194/0x500 generic_writepages+0x64/0xa4 blkdev_writepages+0x24/0x30 do_writepages+0x48/0xa8 __filemap_fdatawrite_range+0xac/0xd8 filemap_write_and_wait+0x30/0x84 __blkdev_put+0x88/0x204 blkdev_put+0xc4/0xe4 blkdev_close+0x28/0x38 __fput+0xe0/0x238 ____fput+0x1c/0x28 task_work_run+0xb0/0xe4 do_notify_resume+0xfc0/0x14bc work_pending+0x8/0x14 The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds. The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time. The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time. Putting some traces around this (after disabling the hung task detector), I could confirm: dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster. With this, my hung task warnings for my test case are gone. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-02Merge tag 'vfs-5.7-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull hibernation fix from Darrick Wong: "Fix a regression where we broke the userspace hibernation driver by disallowing writes to the swap device" * tag 'vfs-5.7-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: hibernate: Allow uswsusp to write to swap
2020-03-23hibernate: Allow uswsusp to write to swapDomenico Andreoli
It turns out that there is one use case for programs being able to write to swap devices, and that is the userspace hibernation code. Quick fix: disable the S_SWAPFILE check if hibernation is configured. Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files") Reported-by: Domenico Andreoli <domenico.andreoli@linux.com> Reported-by: Marian Klein <mkleinsoft@gmail.com> Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-18block: fix a device invalidation regressionChristoph Hellwig
Historically we only set the capacity to zero for devices that support partitions (independ of actually having partitions created). Doing that is rather inconsistent, but changing it broke legacy udisks polling for legacy ide-cdrom devices. Use the crude a crude check for devices that either are non-removable or partitionable to get the sane behavior for most device while not breaking userspace for this particular setup. Fixes: a1548b674403 ("block: move rescan_partitions to fs/block_dev.c") Reported-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-02block: don't send uevent for empty disk when not invalidatingEric Biggers
Commit 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") caused a regression where systemd-udevd spins forever using max CPU starting at boot time. It's caused by a behavior change where a KOBJ_CHANGE uevent is now sent in a case where previously it wasn't. Restore the old behavior. Fixes: 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: move clearing bd_invalidated into check_disk_size_changeChristoph Hellwig
Both callers of check_disk_size_change clear bd_invalidate directly after the call, so move the clearing into check_disk_size_change itself. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: remove (__)blkdev_reread_part as an exported APIChristoph Hellwig
In general drivers should never mess with partition tables directly. Unfortunately s390 and loop do for somewhat historic reasons, but they can use bdev_disk_changed directly instead when we export it as they satisfy the sanity checks we have in __blkdev_reread_part. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd] Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: fix bdev_disk_changed for non-partitioned devicesChristoph Hellwig
We still have to set the capacity to 0 if invalidating or call revalidate_disk if not even if the disk has no partitions. Fix that by merging rescan_partitions into bdev_disk_changed and just stubbing out blk_add_partitions and blk_drop_partitions for non-partitioned devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: move rescan_partitions to fs/block_dev.cChristoph Hellwig
Large parts of rescan_partitions aren't about partitions, and moving it to block_dev.c will allow for some further cleanups by merging it into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14block: merge invalidate_partitions into rescan_partitionsChristoph Hellwig
A lot of the logic in invalidate_partitions and rescan_partitions is shared. Merge the two functions to simplify things. There is a small behavior change in that we now send the kevent change notice also if we were not invalidating but no partitions were found, which seems like the right thing to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-03bdev: Refresh bdev size for disks without partitioningJan Kara
Currently, block device size in not updated on second and further open for block devices where partition scan is disabled. This is particularly annoying for example for DVD drives as that means block device size does not get updated once the media is inserted into a drive if the device is already open when inserting the media. This is actually always the case for example when pktcdvd is in use. Fix the problem by revalidating block device size on every open even for devices with partition scan disabled. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-03bdev: Factor out bdev revalidation into a common helperJan Kara
Factor out code handling revalidation of bdev on disk change into a common helper. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-18Merge tag 'vfs-5.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull swap access updates from Darrick Wong: "Prohibit writing to active swap files and swap partitions. There's no non-malicious use case for allowing userspace to scribble on storage that the kernel thinks it owns" * tag 'vfs-5.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: don't allow writes to swap files mm: set S_SWAPFILE on blockdev swap devices
2019-08-20vfs: don't allow writes to swap filesDarrick J. Wong
Don't let userspace write to an active swap file because the kernel effectively has a long term lease on the storage and things could get seriously corrupted if we let this happen. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-15block: remove REQ_NOWAIT_INLINEJens Axboe
We had a few issues with this code, and there's still a problem around how we deal with error handling for chained/split bios. For now, just revert the code and we'll try again with a thoroug solution. This reverts commits: e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08bdev: Fixup error handling in blkdev_get()Jan Kara
Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") converted blkdev_get() to use the new helpers for finishing claiming of a block device. However the conversion botched the error handling in blkdev_get() and thus the bdev has been marked as held even in case __blkdev_get() returned error. This led to occasional warnings with block/001 test from blktests like: kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0 Correct the error handling. CC: stable@vger.kernel.org Fixes: 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07block: fix O_DIRECT error handling for bio fragmentsJens Axboe
0eb6ddfb865c tried to fix this up, but introduced a use-after-free of dio. Additionally, we still had an issue with error handling, as reported by Darrick: "I noticed a regression in xfs/747 (an unreleased xfstest for the xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down to a simpler reproducer: error-test: 0 209 linear 8:48 0 error-test: 209 1 error error-test: 210 6446894 linear 8:48 210 Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO for sector 209 and to pass the io to the scsi device everywhere else. On 5.3-rc3, performing a directio pread of this range with a < 1M buffer (in other words, a request for fewer than MAX_BIO_PAGES bytes) yields EIO like you'd expect: pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error) pread: Input/output error +++ exited with 0 +++ But doing it with a larger buffer succeeds(!): pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880 read 1146880/1146880 bytes at offset 0 1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec) +++ exited with 0 +++ (Note that the part of the buffer corresponding to the dm-error area is uninitialized) On 5.3-rc2, both commands would fail with EIO like you'd expect. The only change between rc2 and rc3 is commit 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments"). AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB) and a second one for the 96k after that." Fix this by noting that it's always safe to dereference dio if we get BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So we can safely increment the dio size before calling submit_bio(), and then decrement it on failure (not that it really matters, as the bio and dio are going away). For error handling, return to the original method of just using 'ret' for tracking the error, and the size tracking in dio->size. Fixes: 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-01block: Fix __blkdev_direct_IO() for bio fragmentsDamien Le Moal
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO (patch 6a43074e2f46) introduced two problems with BIO fragment handling for direct IOs: 1) The dio size processed is calculated by incrementing the ret variable by the size of the bio fragment issued for the dio. However, this size is obtained directly from bio->bi_iter.bi_size AFTER the bio submission which may result in referencing the bi_size value after the bio completed, resulting in an incorrect value use. 2) The ret variable is not incremented by the size of the last bio fragment issued for the bio, leading to an invalid IO size being returned to the user. Fix both problem by using dio->size (which is incremented before the bio submission) to update the value of ret after bio submissions, including for the last bio fragment issued. Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30loop: Fix mount(2) failure due to race with LOOP_SET_FDJan Kara
Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-26Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Several io_uring fixes/improvements: - Blocking fix for O_DIRECT (me) - Latter page slowness for registered buffers (me) - Fix poll hang under certain conditions (me) - Defer sequence check fix for wrapped rings (Zhengyuan) - Mismatch in async inc/dec accounting (Zhengyuan) - Memory ordering issue that could cause stall (Zhengyuan) - Track sequential defer in bytes, not pages (Zhengyuan) - NVMe pull request from Christoph - Set of hang fixes for wbt (Josef) - Redundant error message kill for libahci (Ding) - Remove unused blk_mq_sched_started_request() and related ops (Marcos) - drbd dynamic alloc shash descriptor to reduce stack use (Arnd) - blkcg ->pd_stat() non-debug print (Tejun) - bcache memory leak fix (Wei) - Comment fix (Akinobu) - BFQ perf regression fix (Paolo) * tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits) io_uring: ensure ->list is initialized for poll commands Revert "nvme-pci: don't create a read hctx mapping without read queues" nvme: fix multipath crash when ANA is deactivated nvme: fix memory leak caused by incorrect subsystem free nvme: ignore subnqn for ADATA SX6000LNP drbd: dynamically allocate shash descriptor block: blk-mq: Remove blk_mq_sched_started_request and started_request bcache: fix possible memory leak in bch_cached_dev_run() io_uring: track io length in async_list based on bytes io_uring: don't use iov_iter_advance() for fixed buffers block: properly handle IOCB_NOWAIT for async O_DIRECT IO blk-mq: allow REQ_NOWAIT to return an error inline io_uring: add a memory barrier before atomic_read rq-qos: use a mb for got_token rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule rq-qos: don't reset has_sleepers on spurious wakeups rq-qos: fix missed wake-ups in rq_qos_throttle wait: add wq_has_single_sleeper helper block, bfq: check also in-flight I/O in dispatch plugging block: fix sysfs module parameters directory path in comment ...
2019-07-21block: properly handle IOCB_NOWAIT for async O_DIRECT IOJens Axboe
A caller is supposed to pass in REQ_NOWAIT if we can't block for any given operation, but O_DIRECT for block devices just ignore this. Hence we'll block for various resource shortages on the block layer side, like having to wait for requests. Use the new REQ_NOWAIT_INLINE to ask for this error to be returned inline, so we can handle it appropriately and return -EAGAIN to the caller. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-06-29block_dev: use bio_release_pages in bio_unmap_userChristoph Hellwig
Use bio_release_pages instead of duplicating it. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block_dev: use bio_release_pages in blkdev_bio_end_ioChristoph Hellwig
Use bio_release_pages instead of duplicating it. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-27block: Don't revalidate bdev of hidden gendiskJan Kara
When hidden gendisk is revalidated, there's no point in revalidating associated block device as there's none. We would thus just create new bdev inode, report "detected capacity change from 0 to XXX" message and evict the bdev inode again. Avoid this pointless dance and confusing message in the kernel log. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-25vfs: Convert bdev to use the new mount APIDavid Howells
Convert the bdev filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-25mount_pseudo(): drop 'name' argument, switch to d_make_root()Al Viro
Once upon a time we used to set ->d_name of e.g. pipefs root so that d_path() on pipes would work. These days it's completely pointless - dentries of pipes are not even connected to pipefs root. However, mount_pseudo() had set the root dentry name (passed as the second argument) and callers kept inventing names to pass to it. Including those that didn't *have* any non-root dentries to start with... All of that had been pointless for about 8 years now; it's time to get rid of that cargo-culting... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14fs/block_dev.c: Remove duplicate headerSabyasachi Gupta
linux/dax.h is included more than once. Link: http://lkml.kernel.org/r/5c867e95.1c69fb81.4f15a.e5e4@mx.google.com Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Acked-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, with no common topic whatsoever..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: libfs: document simple_get_link() Documentation/filesystems/Locking: fix ->get_link() prototype Documentation/filesystems/vfs.txt: document how ->i_link works Documentation/filesystems/vfs.txt: remove bogus "Last updated" date fs: use timespec64 in relatime_need_update fs/block_dev.c: remove unused include
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-01bdev: switch to ->free_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01block: fix handling for BIO_NO_PAGE_REFMing Lei
Commit 399254aaf489211 ("block: add BIO_NO_PAGE_REF flag") introduces BIO_NO_PAGE_REF, and once this flag is set for one bio, all pages in the bio won't be get/put during IO. However, if one bio is submitted via __blkdev_direct_IO_simple(), even though BIO_NO_PAGE_REF is set, pages still may be put. Fixes this issue by avoiding to put pages if BIO_NO_PAGE_REF is set. Fixes: 399254aaf489211 ("block: add BIO_NO_PAGE_REF flag") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-11block: fix the return errno for direct IOJason Yan
If the last bio returned is not dio->bio, the status of the bio will not assigned to dio->bio if it is error. This will cause the whole IO status wrong. ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N 4883648 [0] <idle>-0 [018] ..s. 4017.970888: 8,0 C WS 4924800 + 1024 [0] <idle>-0 [018] ..s. 4017.970909: 8,0 D WS 4935424 + 1024 [<idle>] <idle>-0 [018] ..s. 4017.970924: 8,0 D WS 4936448 + 321 [<idle>] ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R 4883648 + 336 [65475] ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7 ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0 We always have to assign bio->bi_status to dio->bio.bi_status because we will only check dio->bio.bi_status when we return the whole IO to the upper layer. Fixes: 542ff7bf18c6 ("block: new direct I/O implementation") Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-09fs/block_dev.c: remove unused includeChengguang Xu
Just remove unused include <linux/badblocks.h> from fs/block_dev.c. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-18block: add BIO_NO_PAGE_REF flagJens Axboe
If bio_iov_iter_get_pages() is called on an iov_iter that is flagged with NO_REF, then we don't need to add a page reference for the pages that we add. Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows not to drop a reference to these pages. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-24block: add bio_set_polled() helperJens Axboe
For the upcoming async polled IO, we can't sleep allocating requests. If we do, then we introduce a deadlock where the submitter already has async polled IO in-flight, but can't wait for them to complete since polled requests must be active found and reaped. Utilize the helper in the blockdev DIRECT_IO code. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-24block: wire up block device iopoll methodChristoph Hellwig
Just call blk_poll on the iocb cookie, we can derive the block device from the inode trivially. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-15blockdev: Fix livelocks on loop deviceJan Kara
bd_set_size() updates also block device's block size. This is somewhat unexpected from its name and at this point, only blkdev_open() uses this functionality. Furthermore, this can result in changing block size under a filesystem mounted on a loop device which leads to livelocks inside __getblk_gfp() like: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10863 Comm: syz-executor0 Not tainted 4.18.0-rc5+ #151 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x3f/0x50 kernel/kcov.c:106 ... Call Trace: init_page_buffers+0x3e2/0x530 fs/buffer.c:904 grow_dev_page fs/buffer.c:947 [inline] grow_buffers fs/buffer.c:1009 [inline] __getblk_slow fs/buffer.c:1036 [inline] __getblk_gfp+0x906/0xb10 fs/buffer.c:1313 __bread_gfp+0x2d/0x310 fs/buffer.c:1347 sb_bread include/linux/buffer_head.h:307 [inline] fat12_ent_bread+0x14e/0x3d0 fs/fat/fatent.c:75 fat_ent_read_block fs/fat/fatent.c:441 [inline] fat_alloc_clusters+0x8ce/0x16e0 fs/fat/fatent.c:489 fat_add_cluster+0x7a/0x150 fs/fat/inode.c:101 __fat_get_block fs/fat/inode.c:148 [inline] ... Trivial reproducer for the problem looks like: truncate -s 1G /tmp/image losetup /dev/loop0 /tmp/image mkfs.ext4 -b 1024 /dev/loop0 mount -t ext4 /dev/loop0 /mnt losetup -c /dev/loop0 l /mnt Fix the problem by moving initialization of a block device block size into a separate function and call it when needed. Thanks to Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> for help with debugging the problem. Reported-by: syzbot+9933e4476f365f5d5a1b@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-02block: don't use un-ordered __set_current_state(TASK_UNINTERRUPTIBLE)Linus Torvalds
This mostly reverts commit 849a370016a5 ("block: avoid ordered task state change for polled IO"). It was wrongly claiming that the ordering wasn't necessary. The memory barrier _is_ necessary. If something is truly polling and not going to sleep, it's the whole state setting that is unnecessary, not the memory barrier. Whenever you set your state to a sleeping state, you absolutely need the memory barrier. Note that sometimes the memory barrier can be elsewhere. For example, the ordering might be provided by an external lock, or by setting the process state to sleeping before adding yourself to the wait queue list that is used for waking up (where the wait queue lock itself will guarantee that any wakeup will correctly see the sleeping state). But none of those cases were true here. NOTE! Some of the polling paths may indeed be able to drop the state setting entirely, at which point the memory barrier also goes away. (Also note that this doesn't revert the TASK_RUNNING cases: there is no race between a wakeup and setting the process state to TASK_RUNNING, since the end result doesn't depend on ordering). Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28blkdev: avoid migration stalls for blkdev pagesJan Kara
Currently, block device pages don't provide a ->migratepage callback and thus fallback_migrate_page() is used for them. This handler cannot deal with dirty pages in async mode and also with the case a buffer head is in the LRU buffer head cache (as it has elevated b_count). Thus such page can block memory offlining. Fix the problem by using buffer_migrate_page_norefs() for migrating block device pages. That function takes care of dropping bh LRU in case migration would fail due to elevated buffer refcount to avoid stalls and can also migrate dirty pages without writing them. Link: http://lkml.kernel.org/r/20181211172143.7358-6-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30block: avoid extra bio reference for async O_DIRECTChristoph Hellwig
The bio referencing has a trick that doesn't do any actual atomic inc/dec on the reference count until we have to elevator to > 1. For the async IO O_DIRECT case, we can't use the simple DIO variants, so we use __blkdev_direct_IO(). It always grabs an extra reference to the bio after allocation, which means we then enter the slower path of actually having to do atomic_inc/dec on the count. We don't need to do that for the async case, unless we end up going multi-bio, in which case we're already doing huge amounts of IO. For the smaller IO case (< BIO_MAX_PAGES), we can do without the extra ref. Based on an earlier patch (and commit log) from Jens Axboe. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: make blk_poll() take a parameter on whether to spin or notJens Axboe
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19block: avoid ordered task state change for polled IOJens Axboe
For the core poll helper, the task state setting don't need to imply any atomics, as it's the current task itself that is being modified and we're not going to sleep. For IRQ driven, the wakeup path have the necessary barriers to not need us using the heavy handed version of the task state setting. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: don't plug for aio/O_DIRECT HIPRI IOJens Axboe
Those will go straight to issue inside blk-mq, so don't bother setting up a block plug for them. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>