summaryrefslogtreecommitdiff
path: root/fs/btrfs/dev-replace.h
AgeCommit message (Collapse)Author
2022-12-05btrfs: move dev-replace prototypes into dev-replace.hJosef Bacik
We already have a dev-replace.h, simply move these prototypes and helpers into dev-replace.h where they belong. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26btrfs: add struct declarations in dev-replace.hJosef Bacik
dev-replace.h just has function prototypes for device replace, however if you happen to include it in the wrong order you'll get compile errors because of different structures not being defined. Since these are just pointer args to functions we can declare them at the top in order to reduce the pain of using the header. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09btrfs: zoned: mark block groups to copy for device-replaceNaohiro Aota
This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: add __pure attribute to functionsDavid Sterba
The attribute is more relaxed than const and the functions could dereference pointers, as long as the observable state is not changed. We do have such functions, based on -Wsuggest-attribute=pure . The visible effects of this patch are negligible, there are differences in the assembly but hard to summarize. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-29btrfs: get fs_info from trans in btrfs_run_dev_replaceDavid Sterba
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: dev-replace: open code trivial locking helpersDavid Sterba
The dev-replace locking functions are now trivial wrappers around rw semaphore that can be used directly everywhere. No functional change. Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: dev-replace: remove custom read/write blocking schemeDavid Sterba
After the rw semaphore has been added, the custom blocking using ::blocking_readers and ::read_lock_wq is redundant. The blocking logic in __btrfs_map_block is replaced by extending the time the semaphore is held, that has the same blocking effect on writes as the previous custom scheme that waited until ::blocking_readers was zero. Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: mark btrfs_dev_replace_start as staticAnand Jain
There isn't any other consumer other than in its own file dev-replace.c. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-10-15btrfs: open code btrfs_after_dev_replace_commitDavid Sterba
Too trivial, the purpose can be simply documented in a comment. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-10-15btrfs: open code btrfs_dev_replace_stats_incDavid Sterba
The wrapper is too trivial, open coding does not make it less readable. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-10-15btrfs: open code btrfs_dev_replace_clear_lock_blockingDavid Sterba
There's a single caller and the function name does not say it's actually taking the lock, so open coding makes it more explicit. For now, btrfs_dev_replace_read_lock is used instead of read_lock so it's paired with the unlocking wrapper in the same block. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-12btrfs: replace GPL boilerplate by SPDX -- headersDavid Sterba
Remove GPL boilerplate text (long, short, one-line) and keep the rest, ie. personal, company or original source copyright statements. Add the SPDX header. Unify the include protection macros to match the file names. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: split dev-replace locking helpers for read and writeDavid Sterba
The current calls are unclear in what way btrfs_dev_replace_lock takes the locks, so drop the argument, split the helpers and use similar naming as for read and write locks. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: btrfs_dev_replace_cancel() can return intAnand Jain
Current u64 return from btrfs_dev_replace_cancel() was probably done to match the btrfs_ioctl_dev_replace_args::result. However as our actual return value fits in int, and it further gets typecast to u64, so just return int. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: rename __btrfs_dev_replace_cancel()Anand Jain
Remove __ which is for the special functions. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: open code btrfs_dev_replace_cancel()Anand Jain
btrfs_dev_replace_cancel() calls __btrfs_dev_replace_cancel() for the actual cancel so just open code it. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28btrfs: constify device path passed to relevant helpersDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: take an fs_info directly when the root is not used otherwiseJeff Mahoney
There are loads of functions in btrfs that accept a root parameter but only use it to obtain an fs_info pointer. Let's convert those to just accept an fs_info pointer directly. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-28btrfs: refactor btrfs_dev_replace_start for reuseAnand Jain
A refactor patch, and avoids user input verification in the btrfs_dev_replace_start(), and so this function can be reused. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-23Btrfs: fix lockdep deadlock warning due to dev_replaceLiu Bo
Xfstests btrfs/011 complains about a deadlock warning, [ 1226.649039] ========================================================= [ 1226.649039] [ INFO: possible irq lock inversion dependency detected ] [ 1226.649039] 4.1.0+ #270 Not tainted [ 1226.649039] --------------------------------------------------------- [ 1226.652955] kswapd0/46 just changed the state of lock: [ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1226.652955] other info that might help us debug this: [ 1226.652955] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1226.652955] Possible interrupt unsafe locking scenario: [ 1226.652955] CPU0 CPU1 [ 1226.652955] ---- ---- [ 1226.652955] lock(&fs_info->dev_replace.lock); [ 1226.652955] local_irq_disable(); [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] lock(&found->groups_sem); [ 1226.652955] <Interrupt> [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] *** DEADLOCK *** Commit 084b6e7c7607 ("btrfs: Fix a lockdep warning when running xfstest.") tried to fix a similar one that has the exactly same warning, but with that, we still run to this. The above lock chain comes from btrfs_commit_transaction ->btrfs_run_delayed_items ... ->__btrfs_update_delayed_inode ... ->__btrfs_cow_block ... ->find_free_extent ->cache_block_group ->load_free_space_cache ->btrfs_readpages ->submit_one_bio ... ->__btrfs_map_block ->btrfs_dev_replace_lock However, with high memory pressure, tasks which hold dev_replace.lock can be interrupted by kswapd and then kswapd is intended to release memory occupied by superblock, inodes and dentries, where we may call evict_inode, and it comes to [ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30 [ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700 delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads to a ABBA deadlock. To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but things are simpler here since we only needs read's spinlock to blocking lock. With this, btrfs/011 no more produces warnings in dmesg. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2012-12-12Btrfs: add new sources for device replace codeStefan Behrens
This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: add code to scrub to copy read data to another diskStefan Behrens
The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>