| Age | Commit message (Collapse) | Author |
|---|
|
Add experimental support for allowing a swap file to be on an SMB3
mount. There are use cases where swapping over a secure network
filesystem is preferable. In some cases there are no local
block devices large enough, and network block devices can be
hard to setup and secure. And in some cases there are no
local block devices at all (e.g. with the recent addition of
remote boot over SMB3 mounts).
There are various enhancements that can be added later e.g.:
- doing a mandatory byte range lock over the swapfile (until
the Linux VFS is modified to notify the file system that an open
is for a swapfile, when the file can be opened "DENY_ALL" to prevent
others from opening it).
- pinning more buffers in the underlying transport to minimize memory
allocations in the TCP stack under the fs
- documenting how to create ACLs (on the server) to secure the
swapfile (or adding additional tools to cifs-utils to make it easier)
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
The noisy posix error message in readdir was supposed
to be an FYI (not enabled by default)
CIFS VFS: XXX dev 66306, reparse 0, mode 755
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
smbdirect support (SMB3 over RDMA) should be enabled by
default in many configurations.
It is not experimental and is stable enough and has enough
performance benefits to recommend that it be configured by
default. Change the "If unsure N" to "If unsure Y" in
the description of the configuration parameter.
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Immediate packets should only be sent to peer when there are new
receive credits made available. New credits show up on freeing
receive buffer, not on receiving data.
Fix this by avoid unnenecessary work schedules.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When processing errors from ib_post_send(), the transport state needs to be
rolled back to the condition before the error.
Refactor the old code to make it easy to roll back on IB errors, and fix this.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
incoming packets
CIFS uses pre-allocated crypto structures to calculate signatures for both
incoming and outgoing packets. In this way it doesn't need to allocate crypto
structures for every packet, but it requires a lock to prevent concurrent
access to crypto structures.
Remove the lock by allocating crypto structures on the fly for
incoming packets. At the same time, we can still use pre-allocated crypto
structures for outgoing packets, as they are already protected by transport
lock srv_mutex.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
back on failure before sending
Recevie credits should be updated before sending the packet, not
before a work is scheduled. Also, the value needs roll back if
something fails and cannot send.
Signed-off-by: Long Li <longli@microsoft.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Sometimes the remote peer may return more send credits than the send queue
depth. If all the send credits are used to post senasd, we may overflow the
send queue.
Fix this by checking the send queue size before posting a send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As an optimization, SMBD tries to track two types of packets: packets with
payload and without payload. There is no obvious benefit or performance gain
to separately track two types of packets.
Just treat them as pending packets and merge the tracking code.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix tcon use-after-free and NULL ptr deref.
Customer system crashes with the following kernel log:
[462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR
[462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4
[462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4
[462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4
[462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4
[462233.347107] CIFS VFS: Close unmatched open
[462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
...
[exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server)
#6 [...] smb2_cancelled_close_fid at ... [cifs]
#7 [...] process_one_work at ...
#8 [...] worker_thread at ...
#9 [...] kthread at ...
The most likely explanation we have is:
* When we put the last reference of a tcon (refcount=0), we close the
cached share root handle.
* If closing a handle is interrupted, SMB2_close() will
queue a SMB2_close() in a work thread.
* The queued object keeps a tcon ref so we bump the tcon
refcount, jumping from 0 to 1.
* We reach the end of cifs_put_tcon(), we free the tcon object despite
it now having a refcount of 1.
* The queued work now runs, but the tcon, ses & server was freed in
the meantime resulting in a crash.
THREAD 1
========
cifs_put_tcon => tcon refcount reach 0
SMB2_tdis
close_shroot_lease
close_shroot_lease_locked => if cached root has lease && refcount = 0
smb2_close_cached_fid => if cached root valid
SMB2_close => retry close in a thread if interrupted
smb2_handle_cancelled_close
__smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !!
INIT_WORK(&cancelled->work, smb2_cancelled_close_fid);
queue_work(cifsiod_wq, &cancelled->work) => queue work
tconInfoFree(tcon); ==> freed!
cifs_put_smb_ses(ses); ==> freed!
THREAD 2 (workqueue)
========
smb2_cancelled_close_fid
SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon
cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time
*CRASH*
Fixes: d9191319358d ("CIFS: Close cached root handle only if it has a lease")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
To 2.26
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.
Fix it by using kmalloc.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a RDMA packet is received and server is extending send credits, we should
check and unblock senders immediately in IRQ context. Doing it in a worker
queue causes unnecessary delay and doesn't save much CPU on the receive path.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMBDirect send/receive
The packet size needs to take account of SMB2 header size and possible
encryption header size. This is only done when signing is used and it is for
RDMA send/receive, not read/write.
Also remove the dead SMBD code in smb2_negotiate_r(w)size.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It clarifies the code slightly to use SMB2_SIGNATURE_SIZE
define rather than 16.
Suggested-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch is used to fix the bug in collect_uncached_read_data()
that rc is automatically converted from a signed number to an
unsigned number when the CIFS asynchronous read fails.
It will cause ctx->rc is error.
Example:
Share a directory and create a file on the Windows OS.
Mount the directory to the Linux OS using CIFS.
On the CIFS client of the Linux OS, invoke the pread interface to
deliver the read request.
The size of the read length plus offset of the read request is greater
than the maximum file size.
In this case, the CIFS server on the Windows OS returns a failure
message (for example, the return value of
smb2.nt_status is STATUS_INVALID_PARAMETER).
After receiving the response message, the CIFS client parses
smb2.nt_status to STATUS_INVALID_PARAMETER
and converts it to the Linux error code (rdata->result=-22).
Then the CIFS client invokes the collect_uncached_read_data function to
assign the value of rdata->result to rc, that is, rc=rdata->result=-22.
The type of the ctx->total_len variable is unsigned integer,
the type of the rc variable is integer, and the type of
the ctx->rc variable is ssize_t.
Therefore, during the ternary operation, the value of rc is
automatically converted to an unsigned number. The final result is
ctx->rc=4294967274. However, the expected result is ctx->rc=-22.
Signed-off-by: Yilu Lin <linyilu@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
xfstests generic/228 checks if fallocate respect RLIMIT_FSIZE.
After fallocate mode 0 extending enabled, we can hit this failure.
Fix this by check the new file size with vfs helper, return
error if file size is larger then RLIMIT_FSIZE(ulimit -f).
This patch has been tested by LTP/xfstests aginst samba and
Windows server.
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
And add one missing define (COMPRESSION_TRANSFORM_ID) and
flag (TRANSFORM_FLAG_ENCRYPTED)
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
New transform header structures. See recent updates
to MS-SMB2 adding section 2.2.42.1 and 2.2.42.2
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Additional compression capabilities can now be negotiated and a
new compression algorithm. Add the flags for these.
See newly updated MS-SMB2 sections 3.1.4.4.1 and 2.2.3.1.3
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. For example, if BSD process
accounting is enabled and the accounting file has FS_SYNC_FL set and is
located on an ext4 filesystem without a journal, then do_exit() can end
up calling ext4_write_inode(). That triggers the
WARN_ON_ONCE(current->flags & PF_MEMALLOC) there, as it assumes
(appropriately) that inodes aren't written when allocating memory.
This was originally reported for another kernel thread, xfsaild() [1].
cifs_demultiplex_thread() also exits with PF_MEMALLOC set, so it's
potentially subject to this same class of issue -- though I haven't been
able to reproduce the WARN_ON_ONCE() via CIFS, since unlike xfsaild(),
cifs_demultiplex_thread() is sent SIGKILL before exiting, and that
interrupts the write to the BSD process accounting file.
Either way, leaving PF_MEMALLOC set is potentially problematic. Let's
clean this up by properly saving and restoring PF_MEMALLOC.
[1] https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The warning we print on mount about how to use less secure dialects
(when the user does not specify a version on mount) is useful
but is noisy to print on every default mount, and can be changed
to a warn_once. Slightly updated the warning text as well to note
SMB3.1.1 which has been the default which is typically negotiated
(for a few years now) by most servers.
"No dialect specified on mount. Default has changed to a more
secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS
(SMB1). To use the less secure SMB1 dialect to access old
servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1)
specify vers=1.0 on mount."
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
fix warning [-Wunused-but-set-variable] at variable 'rc',
keeping the code readable.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit d0677992d2af ("cifs: add support for flock") added
support for flock, LTP/flock03[1] testcase started to fail.
This testcase is testing flock lock and unlock across fork.
The parent locks file and starts the child process, in which
it unlock the same fd and lock the same file with another fd
again. All the lock and unlock operation should succeed.
Now the child process does not actually unlock the file, so
the following lock fails. Fix this by allowing flock and OFD
lock go through the unlock routine, not skipping if the unlock
request comes from another process.
Patch has been tested by LTP/xfstests on samba and Windows
server, v3.11, with or without cache=none mount option.
[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/flock/flock03.c
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
See commit 349457ccf2592c14bdf13b6706170ae2e94931b1
"Allow file systems to manually d_move() inside of ->rename()"
Lessens possibility of race conditions in rename
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
allows SMB2_open() callers to pass down a POSIX data buffer that will
trigger requesting POSIX create context and parsing the response into
the provided buffer.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
|
|
* add code to request POSIX info level
* parse dir entries and fill cifs_fattr to get correct inode data
since the POSIX payload is variable size the number of entries in a
FIND response needs to be computed differently.
Dirs and regular files are properly reported along with mode bits,
hardlink number, c/m/atime. No special files yet (see below).
Current experimental version of Samba with the extension unfortunately
has issues with wildcards and needs the following patch:
> --- i/source3/smbd/smb2_query_directory.c
> +++ w/source3/smbd/smb2_query_directory.c
> @@ -397,9 +397,7 @@ smbd_smb2_query_directory_send(TALLOC_CTX
> *mem_ctx,
> }
> }
>
> - if (!state->smbreq->posix_pathnames) {
> wcard_has_wild = ms_has_wild(state->in_file_name);
> - }
>
> /* Ensure we've canonicalized any search path if not a wildcard. */
> if (!wcard_has_wild) {
>
Also for special files despite reporting them as reparse point samba
doesn't set the reparse tag field. This patch will mark them as needing
re-evaluation but the re-evaluate code doesn't deal with it yet.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
* add new info level and structs for SMB2 posix extension
* add functions to parse and validate it
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
little progress on the posix create response.
* rename struct to create_posix_rsp to match with the request
create_posix context
* make struct packed
* pass smb info struct for parse_posix_ctxt to fill
* use smb info struct as param
* update TODO
What needs to be done:
SMB2_open() has an optional smb info out argument that it will fill.
Callers making use of this are:
- smb3_query_mf_symlink (need to investigate)
- smb2_open_file
Callers of smb2_open_file (via server->ops->open) are passing an
smbinfo struct but that struct cannot hold POSIX information. All the
call stack needs to be changed for a different info type. Maybe pass
SMB generic struct like cifs_fattr instead.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We really, really don't want people using insecure dialects
unless they realize what they are doing ...
Add mount warning if mounting with vers=1.0 (older SMB1/CIFS
dialect) instead of the default (SMB2.1 or later, typically
SMB3.1.1).
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
There are cases when we don't want to send the SMB2 flush operation
(e.g. when user specifies mount parm "nostrictsync") and it can be
a very expensive operation on the server. In most cases in order
to set mtime, we simply need to flush (write) the dirtry pages from
the client and send the writes to the server not also send a flush
protocol operation to the server.
Fixes: aa081859b10c ("cifs: flush before set-info if we have writeable handles")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cap_unix(ses) defaults to false for SMB2.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
mod_delayed_work() is safer than queue_delayed_work() if there's a
chance that the work is already in the queue.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check the AT_STATX_FORCE_SYNC flag and force an attribute
revalidation if requested by the caller, and if the caller
specificies AT_STATX_DONT_SYNC only revalidate cached attributes
if required. In addition do not flush writes in getattr (which
can be expensive) if size or timestamps not requested by the
caller.
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull cifs fixes from Steve French:
"Three small smb3 fixes, two for stable"
* tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: fiemap: do not return EINVAL if get nothing
CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
cifs: potential unintitliazed error code in cifs_getattr()
|
|
There is measurable performance impact in some synthetic tests due to
commit 6d390e4b5d48 (locks: fix a potential use-after-free problem when
wakeup a waiter). Fix the race condition instead by clearing the
fl_blocker pointer after the wake_up, using explicit acquire/release
semantics.
This does mean that we can no longer use the clearing of fl_blocker as
the wait condition, so switch the waiters over to checking whether the
fl_blocked_member list_head is empty.
Reviewed-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Fixes: 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.
Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
smb2_query_dir_first
The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...
Open files: 0 total (local), 1 open on server
^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.
In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.
I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.
I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Smatch complains that "rc" could be uninitialized.
fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'.
Changing it to "return 0;" improves readability as well.
Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes for old crap in ->atomic_open() instances"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cifs_atomic_open(): fix double-put on late allocation failure
gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
|
|
several iterations of ->atomic_open() calling conventions ago, we
used to need fput() if ->atomic_open() failed at some point after
successful finish_open(). Now (since 2016) it's not needed -
struct file carries enough state to make fput() work regardless
of the point in struct file lifecycle and discarding it on
failure exits in open() got unified. Unfortunately, I'd missed
the fact that we had an instance of ->atomic_open() (cifs one)
that used to need that fput(), as well as the stale comment in
finish_open() demanding such late failure handling. Trivially
fixed...
Fixes: fe9ec8291fca "do_last(): take fput() on error after opening to out:"
Cc: stable@kernel.org # v4.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All other uses of cifs_dbg use defines so change this one.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.
We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.
To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.
The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.
Simple reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define E(s) perror(s), exit(1)
int main(int argc, char *argv[])
{
int fd, ret;
if (argc != 3) {
fprintf(stderr, "Usage: %s A B\n"
"create&open A in write mode, "
"rename A to B, close A\n", argv[0]);
return 0;
}
fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
if (fd == -1) E("openat()");
ret = rename(argv[1], argv[2]);
if (ret) E("rename()");
ret = close(fd);
if (ret) E("close()");
return ret;
}
$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied
Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
|
|
We were not displaying the mount option "signloosely" in /proc/mounts
for cifs mounts which some users found confusing recently
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Ensure that full_path is an UNC path that contains '\\' as delimiter,
which is required by cifs_build_devname().
The build_path_from_dentry_optional_prefix() function may return a
path with '/' as delimiter when using SMB1 UNIX extensions, for
example.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
If from cifs_revalidate_dentry_attr() the SMB2/QUERY_INFO call fails with an
error, such as STATUS_SESSION_EXPIRED, causing the session to be reconnected
it is possible we will leak -EAGAIN back to the application even for
system calls such as stat() where this is not a valid error.
Fix this by re-trying the operation from within cifs_revalidate_dentry_attr()
if cifs_get_inode_info*() returns -EAGAIN.
This fixes stat() and possibly also other system calls that uses
cifs_revalidate_dentry*().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
|
