summaryrefslogtreecommitdiff
path: root/fs/crypto/bio.c
AgeCommit message (Collapse)Author
2020-01-14fscrypt: optimize fscrypt_zeroout_range()Eric Biggers
Currently fscrypt_zeroout_range() issues and waits on a bio for each block it writes, which makes it very slow. Optimize it to write up to 16 pages at a time instead. Also add a function comment, and improve reliability by allowing the allocations of the bio and the first ciphertext page to wait on the corresponding mempools. Link: https://lore.kernel.org/r/20191226160813.53182-1-ebiggers@kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-12-31fscrypt: remove redundant bi_status checkEric Biggers
submit_bio_wait() already returns bi_status translated to an errno. So the additional check of bi_status is redundant and can be removed. Link: https://lore.kernel.org/r/20191209204509.228942-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-10-21fscrypt: remove struct fscrypt_ctxEric Biggers
Now that ext4 and f2fs implement their own post-read workflow that supports both fscrypt and fsverity, the fscrypt-only workflow based around struct fscrypt_ctx is no longer used. So remove the unused code. This is based on a patch from Chandan Rajendra's "Consolidate FS read I/O callbacks code" patchset, but rebased onto the latest kernel, folded __fscrypt_decrypt_bio() into fscrypt_decrypt_bio(), cleaned up fscrypt_initialize(), and updated the commit message. Originally-from: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: decrypt only the needed blocks in __fscrypt_decrypt_bio()Eric Biggers
In __fscrypt_decrypt_bio(), only decrypt the blocks that actually comprise the bio, rather than assuming blocksize == PAGE_SIZE and decrypting the entirety of every page used in the bio. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: support decrypting multiple filesystem blocks per pageEric Biggers
Rename fscrypt_decrypt_page() to fscrypt_decrypt_pagecache_blocks() and redefine its behavior to decrypt all filesystem blocks in the given region of the given page, rather than assuming that the region consists of just one filesystem block. Also remove the 'inode' and 'lblk_num' parameters, since they can be retrieved from the page as it's already assumed to be a pagecache page. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: handle blocksize < PAGE_SIZE in fscrypt_zeroout_range()Eric Biggers
Adjust fscrypt_zeroout_range() to encrypt a block at a time rather than a page at a time, so that it works when blocksize < PAGE_SIZE. This isn't optimized for performance, but then again this function already wasn't optimized for performance. As a future optimization, we could submit much larger bios here. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: rename fscrypt_do_page_crypto() to fscrypt_crypt_block()Eric Biggers
fscrypt_do_page_crypto() only does a single encryption or decryption operation, with a single logical block number (single IV). So it actually operates on a filesystem block, not a "page" per se. To reflect this, rename it to fscrypt_crypt_block(). Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: remove the "write" part of struct fscrypt_ctxEric Biggers
Now that fscrypt_ctx is not used for writes, remove the 'w' fields. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: simplify bounce page handlingEric Biggers
Currently, bounce page handling for writes to encrypted files is unnecessarily complicated. A fscrypt_ctx is allocated along with each bounce page, page_private(bounce_page) points to this fscrypt_ctx, and fscrypt_ctx::w::control_page points to the original pagecache page. However, because writes don't use the fscrypt_ctx for anything else, there's no reason why page_private(bounce_page) can't just point to the original pagecache page directly. Therefore, this patch makes this change. In the process, it also cleans up the API exposed to filesystems that allows testing whether a page is a bounce page, getting the pagecache page from a bounce page, and freeing a bounce page. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-07Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds
Pull fscrypt updates from Ted Ts'o: "Clean up fscrypt's dcache revalidation support, and other miscellaneous cleanups" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: cache decrypted symlink target in ->i_link vfs: use READ_ONCE() to access ->i_link fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext fscrypt: only set dentry_operations on ciphertext dentries fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory fscrypt: fix race allowing rename() and link() of ciphertext dentries fscrypt: clean up and improve dentry revalidation fscrypt: use READ_ONCE() to access ->i_crypt_info fscrypt: remove WARN_ON_ONCE() when decryption fails fscrypt: drop inode argument from fscrypt_get_ctx()
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-16fscrypt: remove WARN_ON_ONCE() when decryption failsEric Biggers
If decrypting a block fails, fscrypt did a WARN_ON_ONCE(). But WARN is meant for kernel bugs, which this isn't; this could be hit by fuzzers using fault injection, for example. Also, there is already a proper warning message logged in fscrypt_do_page_crypto(), so the WARN doesn't add much. Just remove the unnessary WARN. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-16fscrypt: drop inode argument from fscrypt_get_ctx()Eric Biggers
The only reason the inode is being passed to fscrypt_get_ctx() is to verify that the encryption key is available. However, all callers already ensure this because if we get as far as trying to do I/O to an encrypted file without the key, there's already a bug. Therefore, remove this unnecessary argument. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-02fscrypt: allow synchronous bio decryptionEric Biggers
Currently, fscrypt provides fscrypt_decrypt_bio_pages() which decrypts a bio's pages asynchronously, then unlocks them afterwards. But, this assumes that decryption is the last "postprocessing step" for the bio, so it's incompatible with additional postprocessing steps such as authenticity verification after decryption. Therefore, rename the existing fscrypt_decrypt_bio_pages() to fscrypt_enqueue_decrypt_bio(). Then, add fscrypt_decrypt_bio() which decrypts the pages in the bio synchronously without unlocking the pages, nor setting them Uptodate; and add fscrypt_enqueue_decrypt_work(), which enqueues work on the fscrypt_read_workqueue. The new functions will be used by filesystems that support both fscrypt and fs-verity. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-01fscrypt: factor out bio specific functionsRichard Weinberger
That way we can get rid of the direct dependency on CONFIG_BLOCK. Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>